Abstract: In response to address different development challenges, Tanzania is striving to achieve its fourth attribute of the National Development Vision, i.e. to have a well educated and learned society by the year 2025. One of the most cost effective methods that can reach a large part of the society in a short time is to integrate ICT in education through e-learning initiatives. However, elearning initiatives are challenged by limited or lack of connectivity to majority of secondary schools, especially those in rural and remote areas. This paper has explores the possibility for rural secondary school to access online e-Learning resources from a centralized e- Learning Management System (e-LMS). The scope of this paper is limited to schools that have computers irrespective of internet connectivity, resulting in two categories schools; those with internet access and those without. Different connectivity configurations have been proposed according to the ICT infrastructure status of the respective schools. However, majority of rural secondary schools in Tanzania have neither computers nor internet connection. Therefore this is a challenge to be addressed for the disadvantaged schools to benefit from e-Learning initiatives.
Abstract: The purpose of this research was develop a biological
nutrient removal (BNR) system which has low energy consumption, sludge production, and land usage. These indicate that BNR system could be a alternative of future wastewater treatment in ubiquitous
city(U-city). Organics and nitrogen compounds could be removed by this system so that secondary or tertiary stages of wastewater treatment satisfy their standards. This system was composed of oxic and anoxic
filter filed with PVDC and POM media. Anoxic/oxic filter system operated under empty bed contact time of 4 hours by increasing
recirculation ratio from 0 to 100 %. The system removals of total nitrogen and COD were 76.3% and 93%, respectively. To be observed
internal behavior in this system SCOD, NH3-N, and NO3-N were
conducted and removal shows range of 25~100%, 59~99%, and
70~100%, respectively.
Abstract: This study examined a habitat-suitability assessment method namely the Ecological Niche Factor Analysis (ENFA). A virtual species was created and then dispatched in a geographic information system model of a real landscape in three historic scenarios: (1) spreading, (2) equilibrium, and (3) overabundance. In each scenario, the virtual species was sampled and these simulated data sets were used as inputs for the ENFA to reconstruct the habitat suitability model. The 'equilibrium' scenario gives the highest quantity and quality among three scenarios. ENFA was sensitive to the distribution scenarios but not sensitive to sample sizes. The use of a virtual species proved to be a very efficient method, allowing one to fully control the quality of the input data as well as to accurately evaluate the predictive power of the analyses.
Abstract: Mammographic images and data analysis to
facilitate modelling or computer aided diagnostic (CAD) software development should best be done using a common database that can handle various mammographic image file
formats and relate these to other patient information.
This would optimize the use of the data as both primary
reporting and enhanced information extraction of research data could be performed from the single dataset. One desired
improvement is the integration of DICOM file header information into the database, as an efficient and reliable source of supplementary patient information intrinsically
available in the images.
The purpose of this paper was to design a suitable database to link and integrate different types of image files and gather common information that can be further used for research
purposes. An interface was developed for accessing, adding,
updating, modifying and extracting data from the common
database, enhancing the future possible application of the data in CAD processing.
Technically, future developments envisaged include the creation of an advanced search function to selects image files
based on descriptor combinations. Results can be further used for specific CAD processing and other research. Design of a
user friendly configuration utility for importing of the required fields from the DICOM files must be done.
Abstract: Noise level has critical effects on the diagnostic
performance of signal-averaged electrocardiogram (SAECG), because
the true starting and end points of QRS complex would be masked by
the residual noise and sensitive to the noise level. Several studies and
commercial machines have used a fixed number of heart beats
(typically between 200 to 600 beats) or set a predefined noise level
(typically between 0.3 to 1.0 μV) in each X, Y and Z lead to perform
SAECG analysis. However different criteria or methods used to
perform SAECG would cause the discrepancies of the noise levels
among study subjects. According to the recommendations of 1991
ESC, AHA and ACC Task Force Consensus Document for the use of
SAECG, the determinations of onset and offset are related closely to
the mean and standard deviation of noise sample. Hence this study
would try to perform SAECG using consistent root-mean-square
(RMS) noise levels among study subjects and analyze the noise level
effects on SAECG. This study would also evaluate the differences
between normal subjects and chronic renal failure (CRF) patients in
the time-domain SAECG parameters.
The study subjects were composed of 50 normal Taiwanese and 20
CRF patients. During the signal-averaged processing, different RMS
noise levels were adjusted to evaluate their effects on three time
domain parameters (1) filtered total QRS duration (fQRSD), (2) RMS
voltage of the last QRS 40 ms (RMS40), and (3) duration of the low
amplitude signals below 40 μV (LAS40). The study results
demonstrated that the reduction of RMS noise level can increase
fQRSD and LAS40 and decrease the RMS40, and can further increase
the differences of fQRSD and RMS40 between normal subjects and
CRF patients. The SAECG may also become abnormal due to the
reduction of RMS noise level. In conclusion, it is essential to establish
diagnostic criteria of SAECG using consistent RMS noise levels for
the reduction of the noise level effects.
Abstract: Canola is a specific edible type of rapeseed, developed
in the 1970s, which contains about 40 percent oil. This research was
carried out to determine the yield and some quality characteristics of
some winter canola cultivars during the 2010-2011 vegetation period
in Central Anatolia of Turkey. In this research; Oase, Dante,
Californium, Excalibur, Elvis, ES Hydromel, Licord, Orkan, Vectra,
Nelson, Champlain and NK Petrol winter canola varieties were used
as material. The field experiment was set up in a “Randomized
Complete Block Design” with three replications on 21 September
2010. In this research; seed yield, oil content, protein content, oil
yield and protein yield were examined.
As a result of this research; seed yield, oil content, oil yield and
protein yield (except protein content) were significant differences
between the cultivars. The highest seed yield (6348 kg ha-1) was
obtained from the NK Petrol, while the lowest seed yield (3949 kg
ha-1) was determined from the Champlain cultivar was obtained. The
highest oil content (46.73%) was observed from Oase and the lowest
value was obtained from Vectra (41.87%) cultivar. The highest oil
yield (2950 kg ha-1) was determined from NK Petrol while the least
value (1681 kg ha-1) was determined from Champlain cultivar. The
highest protein yield (1539.3 kg ha-1) was obtained from NK Petrol
and the lowest protein yield (976.5 kg ha-1) was obtained from
Champlain cultivar.
The main purpose of the cultivation of oil crops, to increase the
yield of oil per unit area. According the result of this research, NK
Petrol cultivar which ranks first with regard to both seed yield and oil
yield between cultivars as the most suitable winter canola cultivar of
local conditions.
Abstract: The new programming technologies allow for the
creation of components which can be automatically or manually
assembled to reach a new experience in knowledge understanding
and mastering or in getting skills for a specific knowledge area. The
project proposes an interactive framework that permits the creation,
combination and utilization of components that are specific to
mathematical training in high schools.
The main framework-s objectives are:
• authoring lessons by the teacher or the students; all they need
are simple operating skills for Equation Editor (or something
similar, or Latex); the rest are just drag & drop operations,
inserting data into a grid, or navigating through menus
• allowing sonorous presentations of mathematical texts and
solving hints (easier understood by the students)
• offering graphical representations of a mathematical function
edited in Equation
• storing of learning objects in a database
• storing of predefined lessons (efficient for expressions and
commands, the rest being calculations; allows a high
compression)
• viewing and/or modifying predefined lessons, according to the
curricula
The whole thing is focused on a mathematical expressions minicompiler,
storing the code that will be later used for different
purposes (tables, graphics, and optimisations).
Programming technologies used. A Visual C# .NET
implementation is proposed. New and innovative digital learning
objects for mathematics will be developed; they are capable to
interpret, contextualize and react depending on the architecture
where they are assembled.
Abstract: Religion revival including Islam in Kazakhstan represents reaction, first of all on internal social and political change, events after disintegration of the USSR. Process of revival of Kazakhstan Islam was accompanied as positive, so by negative tendencies. Old mosques were restored, were under construction new, Islamic schools and high schools were created, was widely studied religious the dogmatic person, the corresponding literature was published, expanded contacts with foreign Muslim brothers in the faith, the centers of the Arab-Muslim culture extended. At the same time in Kazakhstan, there are religious-political parties and movements, pursuing radical goals down to change the spiritual and cultural identity of Muslims of Kazakhstan by the forcible introduction of non-traditional religious and political, ethnic and cultural values.
Abstract: The purpose of this study was to determine the
influence of physical activity and dietary fat intake on Body Mass
Index (BMI) of lecturers within a higher learning institutionalized
setting. The study adopted a Cross-sectional Correlational Design
and included 120 lecturers selected proportionately by simple
random sampling techniques from a population of 600 lecturers. Data
was collected using questionnaires, which had sections including
physical activity checklist adopted from the international physical
activity questionnaire (IPAQ), 24-hour food recall, anthropometric
measurements mainly weight and height. Analysis involved the use
of bivariate correlations and linear regression. A significant inverse
association was registered between BMI and duration (in minutes)
spent doing moderate intense physical activity per day (r=-0.322,
p
Abstract: The stem cells have ability to differentiated
themselves through mitotic cell division and various range of
specialized cell types. Cellular differentiation is a way by which few
specialized cell develops into more specialized.This paper studies the
fundamental problem of computational schema for an artificial neural
network based on chemical, physical and biological variables of
state. By doing this type of study system could be model for a viable
propagation of various economically important stem cells
differentiation. This paper proposes various differentiation outcomes
of artificial neural network into variety of potential specialized cells
on implementing MATLAB version 2009. A feed-forward back
propagation kind of network was created to input vector (five input
elements) with single hidden layer and one output unit in output
layer. The efficiency of neural network was done by the assessment
of results achieved from this study with that of experimental data
input and chosen target data. The propose solution for the efficiency
of artificial neural network assessed by the comparatative analysis of
“Mean Square Error" at zero epochs. There are different variables of
data in order to test the targeted results.
Abstract: Appropriate ventilation in a classroom is helpful for
enhancing air exchange rate and student concentration. This study
focuses on the effects of fenestration in a four-story school building by
performing numerical simulation of a building when considering
indoor and outdoor environments simultaneously. The wind profile
function embedded in PHOENICS code was set as the inlet boundary
condition in a suburban environment. Sixteen fenestration
combinations were compared in a classroom containing thirty seats.
This study evaluates mean age of air (AGE) and airflow pattern of a
classroom on different floors. Considering both wind profile and
fenestration effects, the airflow on higher floors is channeled toward
the area near ceiling in a room and causes older mean age of air in the
breathing zone. The results in this study serve as a useful guide for
enhancing natural ventilation in a typical school building.
Abstract: Optical Bursts Switching (OBS) is a relatively new
optical switching paradigm. Contention and burst loss in OBS
networks are major concerns. To resolve contentions, an interesting
alternative to discarding the entire data burst is to partially drop the
burst. Partial burst dropping is based on burst segmentation concept
that its implementation is constrained by some technical challenges,
besides the complexity added to the algorithms and protocols on both
edge and core nodes. In this paper, the burst segmentation concept is
investigated, and an implementation scheme is proposed and
evaluated. An appropriate dropping policy that effectively manages
the size of the segmented data bursts is presented. The dropping
policy is further supported by a new control packet format that
provides constant transmission overhead.
Abstract: Different agricultural waste peels were assessed for
their suitability to be used as primary substrates for the
bioremediation of free cyanide (CN-) by a cyanide-degrading fungus
Aspergillus awamori isolated from cyanide containing wastewater.
The bioremediated CN- concentration were in the range of 36 to 110
mg CN-/L, with Orange (C. sinensis) > Carrot (D. carota) > Onion
(A. cepa) > Apple (M. pumila), being chosen as suitable substrates
for large scale CN- degradation processes due to: 1) the high
concentration of bioremediated CN-, 2) total reduced sugars released
into solution to sustain the biocatalyst, and 3) minimal residual NH4-
N concentration after fermentation. The bioremediation rate constants
(k) were 0.017h-1 (0h < t < 24h), with improved bioremediation rates
(0.02189h-1) observed after 24h. The averaged nitrilase activity was
~10 U/L.
Abstract: This study has investigated a vehicle Lumped
Parameter Model (LPM) in frontal crash. There are several ways for
determining spring and damper characteristics and type of problem
shall be considered as system identification. This study use Genetic
Algorithm (GA) procedure, being an effective procedure in case of
optimization issues, for optimizing errors, between target data
(experimental data) and calculated results (being obtained by
analytical solving). In this study analyzed model in 5-DOF then
compared our results with 5-DOF serial model. Finally, the response
of model due to external excitement is investigated.
Abstract: The International Classification of Primary Care (ICPC), which belongs to the WHO Family of International Classifications (WHO-FIC), has a low granularity, which is convenient for describing general medical practice. However, its lack of specificity makes it useful to be used along with an interface terminology. An international survey has been performed, using a questionnaire sent by email to experts from 25 countries, in order to describe the terminologies interfacing with ICPC. Eleven interface terminologies have been identified, developed in Argentina, Australia, Belgium (2), Canada, Denmark, France, Germany, Norway, South Africa, and The Netherlands. Globally, these systems have been poorly assessed until now.
Abstract: The multi-agent system for processing Bio-signals
will help the medical practitioners to have a standard examination
procedure stored in web server. Web Servers supporting any standard
Search Engine follow all possible combinations of the search
keywords as an input by the user to a Search Engine. As a result, a
huge number of Web-pages are shown in the Web browser. It also
helps the medical practitioner to interact with the expert in the field
his need in order to make a proper judgment in the diagnosis phase
[3].A web server uses a web server plug in to establish and
maintained the medical practitioner to make a fast analysis. If the
user uses the web server client can get a related data requesting their
search. DB agent, EEG / ECG / EMG agents- user placed with
difficult aspects for updating medical information-s in web server.
Abstract: Polyurethane foams (PUF) were formed by a chemical
reaction of polyol and isocyanate. The polyol was manufactured by
ring-opening hydrolysis of epoxidized soybean oil in the presence of
phosphoric acid under varying experimental conditions. Other
factors in the foam formulation such as water content and surfactant
were kept constant. The effect of the amount of solvents, phosphoric
acid, and their derivates in the foam formulation on the properties of
polyurethane foams were studied. The properties of the material were
measured via a number of parameters, which are water content of
prepared polyol, polymer density and cellular structures.
Abstract: In the current economy of increasing global
competition, many organizations are attempting to use knowledge as
one of the means to gain sustainable competitive advantage. Besides
large organizations, the success of SMEs can be linked to how well
they manage their knowledge. Despite the profusion of research
about knowledge management within large organizations, fewer
studies tried to analyze KM in SMEs.
This research proposes a new framework showing the determinant
role of organizational dimensions onto KM approaches. The paper
and its propositions are based on a literature review and analysis.
In this research, personalization versus codification,
individualization versus institutionalization and IT-based versus non
IT-based are highlighted as three distinct dimensions of knowledge
management approaches.
The study contributes to research by providing a more nuanced
classification of KM approaches and provides guidance to managers
about the types of KM approaches that should be adopted based on
the size, geographical dispersion and task nature of SMEs.
To the author-s knowledge, the paper is the first of its kind to
examine if there are suitable configurations of KM approaches for
SMEs with different dimensions. It gives valuable information, which
hopefully will help SME sector to accomplish KM.
Abstract: This work presents a low-cost and eco-friendly
building material named Agrostone panel. Africa-s urban population
is growing at an annual rate of 2.8% and 62% of its population will
live in urban areas by 2050. As a consequence, many of the least
urbanized and least developed African countries- will face serious
challenges in providing affordable housing to the urban dwellers.
Since the cost of building materials accounts for the largest
proportion of the overall construction cost, innovating low-cost
building material is vital. Agrostone panel is used in housing projects
in Ethiopia. It uses raw materials of agricultural/industrial wastes
and/or natural minerals as a filler, magnesium-based chemicals as a
binder and fiberglass as reinforcement. Agrostone panel reduces the
cost of wall construction by 50% compared with the conventional
building materials. The pros and cons of Agrostone panel as well as
the use of other waste materials as a raw material to make the panel
more sustainable, low-cost and better properties are discussed.
Abstract: Growing world population has fundamental impacts
and often catastrophic on natural habitat. The immethodical
consumption of energy, destruction of the forests and extinction of
plant and animal species are the consequence of this experience.
Urban sustainability and sustainable urban development, that is so
spoken these days, should be considered as a strategy, goal and
policy, beyond just considering environmental issues and protection.
The desert-s climate has made a bunch of problems for its residents.
Very hot and dry climate in summers of the Iranian desert areas,
when there was no access to modern energy source and mechanical
cooling systems in the past, made Iranian architects to design a
natural ventilation system in their buildings. The structure, like a
tower going upward the roof, besides its ornamental application and
giving a beautiful view to the building, was used as a spontaneous
ventilation system. In this paper, it has been tried to name the
problems of the area and it-s inconvenience, then some answers has
pointed out in order to solve the problems and as an alternative
solution BADGIR (wind-catcher) has been introduced as a solution
knowing that it has been playing a major role in dealing with the
problems.