Abstract: This paper describes a 3D modeling system in
Augmented Reality environment, named 3DARModeler. It can be
considered a simple version of 3D Studio Max with necessary
functions for a modeling system such as creating objects, applying
texture, adding animation, estimating real light sources and casting
shadows. The 3DARModeler introduces convenient, and effective
human-computer interaction to build 3D models by combining both
the traditional input method (mouse/keyboard) and the tangible input
method (markers). It has the ability to align a new virtual object with
the existing parts of a model. The 3DARModeler targets nontechnical
users. As such, they do not need much knowledge of
computer graphics and modeling techniques. All they have to do is
select basic objects, customize their attributes, and put them together
to build a 3D model in a simple and intuitive way as if they were
doing in the real world. Using the hierarchical modeling technique,
the users are able to group several basic objects to manage them as a
unified, complex object. The system can also connect with other 3D
systems by importing and exporting VRML/3Ds Max files. A
module of speech recognition is included in the system to provide
flexible user interfaces.
Abstract: The effect of different combinations of response
feedback on the performance of active control system on nonlinear
frames has been studied in this paper. To this end different feedback
combinations including displacement, velocity, acceleration and full
response feedback have been utilized in controlling the response of
an eight story bilinear hysteretic frame which has been subjected to a
white noise excitation and controlled by eight actuators which could
fully control the frame. For active control of nonlinear frame
Newmark nonlinear instantaneous optimal control algorithm has been
used which a diagonal matrix has been selected for weighting
matrices in performance index. For optimal design of active control
system while the objective has been to reduce the maximum drift to
below the yielding level, Distributed Genetic Algorithm (DGA) has
been used to determine the proper set of weighting matrices. The
criteria to assess the effect of each combination of response feedback
have been the minimum required control force to reduce the
maximum drift to below the yielding drift. The results of numerical
simulation show that the performance of active control system is
dependent on the type of response feedback where the velocity
feedback is more effective in designing optimal control system in
comparison with displacement and acceleration feedback. Also using
full feedback of response in controller design leads to minimum
control force amongst other combinations. Also the distributed
genetic algorithm shows acceptable convergence speed in solving the
optimization problem of designing active control systems.
Abstract: Within the last years, several technologies have been developed to help building e-learning portals. Most of them follow approaches that deliver a vast amount of functionalities, suitable for class-like learning. The SuGI project, as part of the D-Grid (funded by the BMBF), targets on delivering a highly scalable and sustainable learning solution to provide materials (e.g. learning modules, training systems, webcasts, tutorials, etc.) containing knowledge about Grid computing to the D-Grid community. In this article, the process of the development of an e-learning portal focused on the requirements of this special user group is described. Furthermore, it deals with the conceptual and technical design of an e-learning portal, addressing the special needs of heterogeneous target groups. The main focus lies on the quality management of the software development process, Web templates for uploading new contents, the rich search and filter functionalities which will be described from a conceptual as well as a technical point of view. Specifically, it points out best practices as well as concepts to provide a sustainable solution to a relatively unknown and highly heterogeneous community.
Abstract: The indoor airflow with a mixed natural/forced convection
was numerically calculated using the laminar and turbulent
approach. The Boussinesq approximation was considered for a simplification
of the mathematical model and calculations. The results
obtained, such as mean velocity fields, were successfully compared
with experimental PIV flow visualizations. The effect of the distance
between the cooled wall and the heat exchanger on the temperature
and velocity distributions was calculated. In a room with a simple
shape, the computational code OpenFOAM demonstrated an ability to
numerically predict flow patterns. Furthermore, numerical techniques,
boundary type conditions and the computational grid quality were
examined. Calculations using the turbulence model k-omega had a
significant effect on the results influencing temperature and velocity
distributions.
Abstract: This paper presents a simple approach for load
flow analysis of a radial distribution network. The proposed
approach utilizes forward and backward sweep algorithm
based on Kirchoff-s current law (KCL) and Kirchoff-s voltage
law (KVL) for evaluating the node voltages iteratively. In this
approach, computation of branch current depends only on the
current injected at the neighbouring node and the current in
the adjacent branch. This approach starts from the end nodes
of sub lateral line, lateral line and main line and moves
towards the root node during branch current computation. The
node voltage evaluation begins from the root node and moves
towards the nodes located at the far end of the main, lateral
and sub lateral lines. The proposed approach has been tested
using four radial distribution systems of different size and
configuration and found to be computationally efficient.
Abstract: It has been shown that in most accidents the driver is responsible due to being distracted or misjudging the situation. In order to solve such problems research has been dedicated to developing driver assistance systems that are able to monitor the traffic situation around the vehicle. This paper presents methods for recognizing several circumstances on a road. The methods use both the in-vehicle warning systems and the roadside infrastructure. Preliminary evaluation results for fog and ice-on-road detection are presented. The ice detection results are based on data recorded in a test track dedicated to tyre friction testing. The achieved results anticipate that ice detection could work at a performance of 70% detection with the right setup, which is a good foundation for implementation. However, the full benefit of the presented cooperative system is achieved by fusing the outputs of multiple data sources, which is the key point of discussion behind this publication.
Abstract: In this paper, an Arabic letter recognition system based on Artificial Neural Networks (ANNs) and statistical analysis for feature extraction is presented. The ANN is trained using the Least Mean Squares (LMS) algorithm. In the proposed system, each typed Arabic letter is represented by a matrix of binary numbers that are used as input to a simple feature extraction system whose output, in addition to the input matrix, are fed to an ANN. Simulation results are provided and show that the proposed system always produces a lower Mean Squared Error (MSE) and higher success rates than the current ANN solutions.
Abstract: Company mergers and acquisitions reached their peak
in the twenty-first century. Mergers and acquisitions have become one
of the competitive strategies for external growth. In general, it is
believed that mergers and acquisitions can create synergies. However,
they require complete information technology system and service
integration, especially in the banking industry. Much of the research
has focused on performance evaluation, shareholder equity allocation,
or even the increase of company market value after the merger and
acquisition, whereas few scholars have focused on information system
integration post merger and acquisition. This study indicates the role
of information systems after a merger and acquisition, explaining the
benefits of information system integration using a merger and
acquisition case in the banking industry as an example. In addition, we
discuss factors that affect the performance of information system
integration, and utilize system dynamics to interpret the relationship
among factors that affect information system integration performance
in the banking industry after a merger and acquisition.
Abstract: The number of users supported in a DS-CDMA
cellular system is typically less than spreading factor (N), and the
system is said to be underloaded. Overloading is a technique to
accommodate more number of users than the spreading factor N. In
O/O overloading scheme, the first set is assigned to the N
synchronous users and the second set is assigned to the additional
synchronous users. An iterative multistage soft decision interference
cancellation (SDIC) receiver is used to remove high level of
interference between the two sets. Performance is evaluated in terms
of the maximum number acceptable users so that the system
performance is degraded slightly compared to the single user
performance at a specified BER. In this paper, the capacity of CDMA
based O/O overloading scheme is evaluated with SDIC receiver. It is
observed that O/O scheme using orthogonal Gold codes provides
25% channel overloading (N=64) for synchronous DS-CDMA
system on an AWGN channel in the uplink at a BER of 1e-5.For a
Rayleigh faded channel, the critical capacity is 40% at a BER of 5e-5
assuming synchronous users. But in practical systems, perfect chip
timing is very difficult to maintain in the uplink.. We have shown that
the overloading performance reduces to 11% for a timing
synchronization error of 0.02Tc for a BER of 1e-5.
Abstract: An effective approach for unbalanced three-phase
distribution power flow solutions is proposed in this paper. The
special topological characteristics of distribution networks have been
fully utilized to make the direct solution possible. Two matrices–the
bus-injection to branch-current matrix and the branch-current to busvoltage
matrix– and a simple matrix multiplication are used to
obtain power flow solutions. Due to the distinctive solution
techniques of the proposed method, the time-consuming LU
decomposition and forward/backward substitution of the Jacobian
matrix or admittance matrix required in the traditional power flow
methods are no longer necessary. Therefore, the proposed method is
robust and time-efficient. Test results demonstrate the validity of the
proposed method. The proposed method shows great potential to be
used in distribution automation applications.
Abstract: Most fingerprint recognition techniques are based on minutiae matching and have been well studied. However, this technology still suffers from problems associated with the handling of poor quality impressions. One problem besetting fingerprint matching is distortion. Distortion changes both geometric position and orientation, and leads to difficulties in establishing a match among multiple impressions acquired from the same finger tip. Marking all the minutiae accurately as well as rejecting false minutiae is another issue still under research. Our work has combined many methods to build a minutia extractor and a minutia matcher. The combination of multiple methods comes from a wide investigation into research papers. Also some novel changes like segmentation using Morphological operations, improved thinning, false minutiae removal methods, minutia marking with special considering the triple branch counting, minutia unification by decomposing a branch into three terminations, and matching in the unified x-y coordinate system after a two-step transformation are used in the work.
Abstract: A feature weighting and selection method is proposed
which uses the structure of a weightless neuron and exploits the
principles that govern the operation of Genetic Algorithms and
Evolution. Features are coded onto chromosomes in a novel way
which allows weighting information regarding the features to be
directly inferred from the gene values. The proposed method is
significant in that it addresses several problems concerned with
algorithms for feature selection and weighting as well as providing
significant advantages such as speed, simplicity and suitability for
real-time systems.
Abstract: This paper describes the application of a model
predictive controller to the problem of batch reactor temperature
control. Although a great deal of work has been done to improve
reactor throughput using batch sequence control, the control of the
actual reactor temperature remains a difficult problem for many
operators of these processes. Temperature control is important as
many chemical reactions are sensitive to temperature for formation of
desired products. This controller consist of two part (1) a nonlinear
control method GLC (Global Linearizing Control) to create a linear
model of system and (2) a Model predictive controller used to obtain
optimal input control sequence. The temperature of reactor is tuned
to track a predetermined temperature trajectory that applied to the
batch reactor. To do so two input signals, electrical powers and the
flow of coolant in the coil are used. Simulation results show that the
proposed controller has a remarkable performance for tracking
reference trajectory while at the same time it is robust against noise
imposed to system output.
Abstract: Constant upgrading of Enterprise Resource Planning
(ERP) systems is necessary, but can cause new defects. This paper
attempts to model the likelihood of defects after completed upgrades
with Weibull defect probability density function (PDF). A case study
is presented analyzing data of recorded defects obtained for one ERP
subsystem. The trends are observed for the value of the parameters
relevant to the proposed statistical Weibull distribution for a given
one year period. As a result, the ability to predict the appearance of
defects after the next upgrade is described.
Abstract: In the globalized e-learning environment, students coming from different cultures and countries have different characteristics and require different support designed for their approaches to study and learning styles. This paper explores the ways in which cultural background influences students- approaches to study and learning styles. Participants in the study consisted of 131 eastern students and 54 western students from an Australian university. The students were tested using the Study Process Questionnaire (SPQ) for assessing their approaches to study and the Index of Learning Styles Questionnaire (ILS) for assessing their learning styles. The results of the study led to a set of principles being proposed to guide personalization of e-learning system design on the basis of cultural differences.
Abstract: The paper attempts to contribute to the largely
neglected social and anthropological discussion of technology development on the one hand, and to redirecting the emphasis in
anthropology from primitive and exotic societies to problems of high
relevance in contemporary era and how technology is used in
everyday life. It draws upon multidimensional models of intelligence
and ideal type formation. It is argued that the predominance of
computational and cognitive cosmovisions have led to technology alienation. Injection of communicative competence in artificially
intelligent systems and identity technologies in the coming
information society are analyzed
Abstract: In this paper, an automatic guided mobile robot using a new magnetic position meter is described. In order to measure the lateral position of a mobile robot, a new magnetic position meter is developed. The magnetic position meter can detect the position of a magnetic wire on the center of road. A mobile robot in designed with a sensing system, a steering system and a driving system. The designed mobile robot is tested to verify the performance of automatic guidance.
Abstract: In this paper, frequency offset (FO) estimation schemes
robust to the non-Gaussian noise environments are proposed for
orthogonal frequency division multiplexing (OFDM) systems. First,
a maximum-likelihood (ML) estimation scheme in non-Gaussian
noise environments is proposed, and then, the complexity of the
ML estimation scheme is reduced by employing a reduced set of
candidate values. In numerical results, it is demonstrated that the
proposed schemes provide a significant performance improvement
over the conventional estimation scheme in non-Gaussian noise
environments while maintaining the performance similar to the
estimation performance in Gaussian noise environments.
Abstract: Methods of contemporary mathematical physics such
as chaos theory are useful for analyzing and understanding the
behavior of complex biological and physiological systems. The three
dimensional model of HIV/AIDS is the basis of active research since
it provides a complete characterization of disease dynamics and the
interaction of HIV-1 with the immune system. In this work, the
behavior of the HIV system is analyzed using the three dimensional
HIV model and a chaotic measure known as the Hurst exponent.
Results demonstrate that Hurst exponents of CD4, CD8 cells and
viral load vary nonlinearly with respect to variations in system
parameters. Further, it was observed that the three dimensional HIV
model can accommodate both persistent (H>0.5) and anti-persistent
(H
Abstract: Recently, Jia et al. proposed a remote user authentication scheme using bilinear pairings and an Elliptic Curve Cryptosystem (ECC). However, the scheme is vulnerable to privileged insider attack at their proposed registration phase and to forgery attack at their proposed authentication phase. In addition, the scheme can be vulnerable to server spoofing attack because it does not provide mutual authentication between the user and the remote server. Therefore, this paper points out that the Jia et al. scheme is vulnerable to the above three attacks.