Abstract: One of the most important aspects expected from ERP systems is to integrate various operations existing in administrative, financial, commercial, human resources, and production departments of the consumer organization. Also, it is often needed to integrate the new ERP system with the organization legacy systems when implementing the ERP package in the organization. Without relying on an appropriate software architecture to realize the required integration, ERP implementation processes become error prone and time consuming; in some cases, the ERP implementation may even encounters serious risks. In this paper, we propose a new architecture that is based on the agent oriented vision and supplies the integration expected from ERP systems using several independent but cooperator agents. Besides integration which is the main issue of this paper, the presented architecture will address some aspects of intelligence and learning capabilities existing in ERP systems
Abstract: Understanding the consumption and production of
various metabolites of fibroblast conditioned media is needed for its
proper and optimized use in expansion of pluripotent stem cells. For
this purpose, we have used the HPLC method to analyse the
consumption of glucose and the production of lactate over time by
mouse embryonic fibroblasts. The experimental data have also been
compared with mathematical model fits. 0.025 moles of lactate was
produced after 72 hrs while the glucose concentration decreased from
0.017 moles to 0.011 moles. The mathematical model was able to
predict the trends of glucose consumption and lactate production.
Abstract: In this study, workplace environmental monitoring
systems were established using USN(Ubiquitous Sensor Networks)
and LabVIEW. Although existing direct sampling methods enable
finding accurate values as of the time points of measurement, those
methods are disadvantageous in that continuous management and
supervision are difficult and costs for are high when those methods are
used. Therefore, the efficiency and reliability of workplace
management by supervisors are relatively low when those methods are
used. In this study, systems were established so that information on
workplace environmental factors such as temperatures, humidity and
noises is measured and transmitted to the PC in real time to enable
supervisors to monitor workplaces through LabVIEW on the PC.
When any accidents have occurred in workplaces, supervisors can
immediately respond through the monitoring system and this system
enables integrated workplace management and the prevention of
safety accidents. By introducing these monitoring systems, safety
accidents due to harmful environmental factors in workplaces can be
prevented and these monitoring systems will be also helpful in finding
out the correlation between safety accidents and occupational diseases
by comparing and linking databases established by this monitoring
system with existing statistical data.
Abstract: This paper is concerned with the application of small
rating Capacitive Energy Storage units for the improvement of
Automatic Generation Control of a multiunit multiarea power
system. Generation Rate Constraints are also considered in the
investigations. Integral Squared Error technique is used to obtain the
optimal integral gain settings by minimizing a quadratic performance
index. Simulation studies reveal that with CES units, the deviations
in area frequencies and inter-area tie-power are considerably
improved in terms of peak deviations and settling time as compared
to that obtained without CES units.
Abstract: E-Appointment Scheduling (EAS) has been developed
to handle appointment for UMP students, lecturers in Faculty of
Computer Systems & Software Engineering (FCSSE) and Student
Medical Center. The schedules are based on the timetable and
university activities. Constraints Logic Programming (CLP) has been
implemented to solve the scheduling problems by giving
recommendation to the users in part of determining any available
slots from the lecturers and doctors- timetable. By using this system,
we can avoid wasting time and cost because this application will set
an appointment by auto-generated. In addition, this system can be an
alternative to the lecturers and doctors to make decisions whether to
approve or reject the appointments.
Abstract: The mosaicing technique has been employed in more and more application fields, from entertainment to scientific ones. In the latter case, often the final evaluation is still left to human beings, that assess visually the quality of the mosaic. Many times, a lack of objective measurements in microscopic mosaicing may prevent the mosaic from being used as a starting image for further analysis. In this work we analyze three different metrics and indexes, in the domain of signal analysis, image analysis and visual quality, to measure the quality of different aspects of the mosaicing procedure, such as registration errors and visual quality. As the case study we consider the mosaicing algorithm we developed. The experiments have been carried out by considering mosaics with very different features: histological samples, that are made of detailed and contrasted images, and live stem cells, that show a very low contrast and low detail levels.
Abstract: Proactive coping directed at an upcoming as opposed
to an ongoing stressor, is a new focus in positive psychology. The
present study explored the proactive coping-s effect on the workplace
adaptation after transition from college to workplace. In order to
demonstrate the influence process between them, we constructed the
model of proactive coping style effecting the actual positive coping
efforts and outcomes by mediating proactive competence during one
year after the transition. Participants (n = 100) started to work right
after graduating from college completed all the four time-s surveys
--one month before (Time 0), one month after (Time 1), three months
after (Time 2), and one year after (Time 3) the transition. Time 0
survey included the measurement of proactive coping style and
competence. Time 1, 2, 3 surveys included the measurement of the
challenge cognitive appraisal, problem solving coping strategy, and
subjective workplace adaptation. The result indicated that proactive
coping style effected newcomers- actual coping efforts and outcomes
by mediating proactive coping competence. The result also showed
that proactive coping competence directly promoted Time1-s actual
positive coping efforts and outcomes, and indirectly promoted Time
2-s and Time 3-s.
Abstract: This paper presents a new approach for image
segmentation by applying Pillar-Kmeans algorithm. This
segmentation process includes a new mechanism for clustering the
elements of high-resolution images in order to improve precision and
reduce computation time. The system applies K-means clustering to
the image segmentation after optimized by Pillar Algorithm. The
Pillar algorithm considers the pillars- placement which should be
located as far as possible from each other to withstand against the
pressure distribution of a roof, as identical to the number of centroids
amongst the data distribution. This algorithm is able to optimize the
K-means clustering for image segmentation in aspects of precision
and computation time. It designates the initial centroids- positions
by calculating the accumulated distance metric between each data
point and all previous centroids, and then selects data points which
have the maximum distance as new initial centroids. This algorithm
distributes all initial centroids according to the maximum
accumulated distance metric. This paper evaluates the proposed
approach for image segmentation by comparing with K-means and
Gaussian Mixture Model algorithm and involving RGB, HSV, HSL
and CIELAB color spaces. The experimental results clarify the
effectiveness of our approach to improve the segmentation quality in
aspects of precision and computational time.
Abstract: A concrete structure is designed and constructed for its
purpose of use, and is expected to maintain its function for the target
durable years from when it was planned. Nevertheless, as time elapses
the structure gradually deteriorates and then eventually degrades to the
point where the structure cannot exert the function for which it was
planned. The performance of concrete that is able to maintain the level
of the performance required over the designed period of use as it has
less deterioration caused by the elapse of time under the designed
condition is referred to as Durability. There are a number of causes of
durability degradation, but especially chloride damage, carbonation,
freeze-thaw, etc are the main causes. In this study, carbonation, one of
the main causes of deterioration of the durability of a concrete
structure, was investigated via a microstructure analysis technique.
The method for the measurement of carbonation was studied using the
existing indicator method, and the method of measuring the progress
of carbonation in a quantitative manner was simultaneously studied
using a FT-IR (Fourier-Transform Infrared) Spectrometer along with
the microstructure analysis technique.
Abstract: The article emphasizes the ideological commitment of
the philosopher Emil Cioran. It presents firstly Cioran's works on the
theme announced by the title, then the European context that
determined the political option of Cioran and a brief analysis of his
relationship with History during his French period. The anti-
Semitism of Cioran was favored by his attachment to a few
philosophers, but also by the European extremist and anti-Semitic
context. The article seeks to demonstrate that the philosopher Cioran,
known more for his pessimism and nihilism, maintained in time an
obsessive relationship with History. His political philosophy is as
important as his subjective philosophy, better known than the former.
Abstract: Kobe City is a metropolis including large suburbs, where housing communities have been developed for many years. People have been recently moving to the urban areas and the suburbs are losing their power to attract population. At the same time, many blocks of high-rise flats have being built near railway stations adjoining town centers, and are drawing people of all generations. Residents with different lifestyle preferences are making good use of town centers and city centers based on effective railway services to live together happily in a household as well as the same flats. Thus railway services can play an essential role in sustainable urban development.
Abstract: This paper investigates and compares performance of
various conventional and fuzzy logic based controllers at generator
locations for oscillation damping. Performance of combination of
conventional and fuzzy logic based controllers also studied by
comparing overshoot on the active power deviation response for a
small disturbance and damping ratio of the critical mode. Fuzzy logic
based controllers can not be modeled in the state space form to get
the eigenvalues and corresponding damping ratios of various modes
of generators and controllers. Hence, a new method based on tracing
envelop of time domain waveform is also presented and used in the
paper for comparing performance of controllers. The paper also
shows that if the fuzzy based controllers designed separately
combining them could not lead to a better performance.
Abstract: This paper addresses the stability of the switched systems with discrete and distributed time delays. By applying Lyapunov functional and function method, we show that, if the norm of system matrices Bi is small enough, the asymptotic stability is always achieved. Finally, a example is provided to verify technically feasibility and operability of the developed results.
Abstract: Whilst there is growing evidence that activity
across the lifespan is beneficial for improved health, there are
also many changes involved with the aging process and
subsequently the potential for reduced indices of health. The
nexus between health, physical activity and aging is complex
and has raised much interest in recent times due to the
realization that a multifaceted approached is necessary in
order to counteract a growing obesity epidemic. By
investigating age based trends within a population adhering to
competitive sport at older ages, further insight might be
gleaned to assist in understanding one of many factors
influencing this relationship.
BMI was derived using data gathered on a total of 6,071
masters athletes (51.9% male, 48.1% female) aged 25 to 91
years ( =51.5, s =±9.7), competing at the Sydney World
Masters Games (2009). Using linear and loess regression it
was demonstrated that the usual tendency for prevalence of
higher BMI increasing with age was reversed in the sample.
This trend in reversal was repeated for both male and female
only sub-sets of the sample participants, indicating the
possibility of improved prevalence of BMI with increasing
age for both the sample as a whole and these individual subgroups.
This evidence of improved classification in one index of
health (reduced BMI) for masters athletes (when compared to
the general population) implies there are either improved
levels of this index of health with aging due to adherence to
sport or possibly the reduced BMI is advantageous and
contributes to this cohort adhering (or being attracted) to
masters sport at older ages. Demonstration of this
proportionately under-investigated World Masters Games
population having an improved relationship between BMI and
increasing age over the general population is of particular
interest in the context of the measures being taken globally to
curb an obesity epidemic.
Abstract: The production of a plant can be measured in terms of
seeds. The generation of seeds plays a critical role in our social and
daily life. The fruit production which generates seeds, depends on the
various parameters of the plant, such as shoot length, leaf number,
root length, root number, etc When the plant is growing, some leaves
may be lost and some new leaves may appear. It is very difficult to
use the number of leaves of the tree to calculate the growth of the
plant.. It is also cumbersome to measure the number of roots and
length of growth of root in several time instances continuously after
certain initial period of time, because roots grow deeper and deeper
under ground in course of time. On the contrary, the shoot length of
the tree grows in course of time which can be measured in different
time instances. So the growth of the plant can be measured using the
data of shoot length which are measured at different time instances
after plantation. The environmental parameters like temperature, rain
fall, humidity and pollution are also play some role in production of
yield. The soil, crop and distance management are taken care to
produce maximum amount of yields of plant. The data of the growth
of shoot length of some mustard plant at the initial stage (7,14,21 &
28 days after plantation) is available from the statistical survey by a
group of scientists under the supervision of Prof. Dilip De. In this
paper, initial shoot length of Ken( one type of mustard plant) has
been used as an initial data. The statistical models, the methods of
fuzzy logic and neural network have been tested on this mustard
plant and based on error analysis (calculation of average error) that
model with minimum error has been selected and can be used for the
assessment of shoot length at maturity. Finally, all these methods
have been tested with other type of mustard plants and the particular
soft computing model with the minimum error of all types has been
selected for calculating the predicted data of growth of shoot length.
The shoot length at the stage of maturity of all types of mustard
plants has been calculated using the statistical method on the
predicted data of shoot length.
Abstract: The present study presents a new approach to automatic
data clustering and classification problems in large and complex
databases and, at the same time, derives specific types of explicit rules
describing each cluster. The method works well in both sparse and
dense multidimensional data spaces. The members of the data space
can be of the same nature or represent different classes. A number
of N-dimensional ellipsoids are used for enclosing the data clouds.
Due to the geometry of an ellipsoid and its free rotation in space
the detection of clusters becomes very efficient. The method is based
on genetic algorithms that are used for the optimization of location,
orientation and geometric characteristics of the hyper-ellipsoids. The
proposed approach can serve as a basis for the development of
general knowledge systems for discovering hidden knowledge and
unexpected patterns and rules in various large databases.
Abstract: This paper presents a new heuristic algorithm useful
for long-term planning of survivable WDM networks. A multi-period
model is formulated that combines network topology design and
capacity expansion. The ability to determine network expansion
schedules of this type becomes increasingly important to the
telecommunications industry and to its customers. The solution
technique consists of a Genetic Algorithm that allows generating
several network alternatives for each time period simultaneously and
shortest-path techniques to deduce from these alternatives a least-cost
network expansion plan over all time periods. The multi-period
planning approach is illustrated on a realistic network example.
Extensive simulations on a wide range of problem instances are
carried out to assess the cost savings that can be expected by
choosing a multi-period planning approach instead of an iterative
network expansion design method.
Abstract: ISO 9000 is the most popular and widely adopted meta-standard for quality and operational improvements. However, only limited empirical research has been conducted to examine the impact of ISO 9000 on operational performance based on objective and longitudinal data. To reveal any causal relationship between the adoption of ISO 9000 and operational performance, we examined the timing and magnitude of change in time-based performance as a result of ISO 9000 adoption. We analyzed the changes in operating cycle, inventory days, and account receivable days prior and after the implementation of ISO 9000 in 695 publicly listed manufacturing firms. We found that ISO 9000 certified firms shortened their operating cycle time by 5.28 days one year after the implementation of ISO 9000. In the long-run (3 years after certification), certified firms showed continuous improvement in time-based efficiency, and experienced a shorter operating cycle time of 11 days than that of non-certified firms. There was an average of 6.5% improvement in operating cycle time for ISO 9000 certified firms. Both inventory days and account receivable days showed similar significant improvements after the implementation of ISO 9000, too.
Abstract: Maintenance is one of the most important activities in
the shipyard industry. However, sometimes it is not supported by
adequate services from the shipyard, where inaccuracy in estimating
the duration of the ship maintenance is still common. This makes
estimation of ship maintenance duration is crucial. This study uses
Data Mining approach, i.e., CART (Classification and Regression
Tree) to estimate the duration of ship maintenance that is limited to
dock works or which is known as dry docking. By using the volume
of dock works as an input to estimate the maintenance duration, 4
classes of dry docking duration were obtained with different linear
model and job criteria for each class. These linear models can then be
used to estimate the duration of dry docking based on job criteria.
Abstract: This paper presents a time control liquids mixing
system in the tanks as an application of fuzzy time control discrete
model. The system is designed for a wide range of industrial
applications. The simulation design of control system has three
inputs: volume, viscosity, and selection of product, along with the
three external control adjustments for the system calibration or to
take over the control of the system autonomously in local or
distributed environment. There are four controlling elements: rotatory
motor, grinding motor, heating and cooling units, and valves
selection, each with time frame limit. The system consists of three
controlled variables measurement through its sensing mechanism for
feed back control. This design also facilitates the liquids mixing
system to grind certain materials in tanks and mix with fluids under
required temperature controlled environment to achieve certain
viscous level. Design of: fuzzifier, inference engine, rule base,
deffuzifiers, and discrete event control system, is discussed. Time
control fuzzy rules are formulated, applied and tested using
MATLAB simulation for the system.