Abstract: The low power wireless sensor devices which usually
uses the low power wireless private area network (IEEE 802.15.4)
standard are being widely deployed for various purposes and in
different scenarios. IPv6 low power wireless private area network
(6LoWPAN) was adopted as part of the IETF standard for the
wireless sensor devices so that it will become an open standard
compares to other dominated proprietary standards available in the
market. 6LoWPAN also allows the integration and communication of
sensor nodes with the Internet more viable. This paper presents a
comparative study on different available IPv6 platforms for wireless
sensor networks including open and close sources. It also discusses
about the platforms used by these stacks. Finally it evaluates and
provides appropriate suggestions which can be use for selection of
required IPv6 stack for low power devices.
Abstract: Phytophthora cinnamomi (P. c) is a plant pathogenic
oomycete that is capable of damaging plants in commercial production
systems and natural ecosystems worldwide. The most common
methods for the detection and diagnosis of P. c infection are
expensive, elaborate and time consuming. This study was carried out
to examine whether species specific and life cycle specific volatile
organic compounds (VOCs) can be absorbed by solid-phase
microextraction fibers and detected by gas chromatography that are
produced by P. c and another oomycete Pythium dissotocum. A
headspace solid-phase microextraction (HS-SPME) together with gas
chromatography (GC) method was developed and optimized for the
identification of the VOCs released by P. c. The optimized parameters
included type of fiber, exposure time, desorption temperature and
desorption time. Optimization was achieved with the analytes of P.
c+V8A and V8A alone. To perform the HS-SPME, six types of fiber
were assayed and compared: 7μm Polydimethylsiloxane (PDMS),
100μm Polydimethylsiloxane (PDMS), 50/30μm
Divinylbenzene/CarboxenTM/Polydimethylsiloxane
DVB/CAR/PDMS), 65μm Polydimethylsiloxane/Divinylbenzene
(PDMS/DVB), 85μm Polyacrylate (PA) fibre and 85μm CarboxenTM/
Polydimethylsiloxane (Carboxen™/PDMS). In a comparison of the
efficacy of the fibers, the bipolar fiber DVB/CAR/PDMS had a higher
extraction efficiency than the other fibers. An exposure time of 16h
with DVB/CAR/PDMS fiber in the sample headspace was enough to
reach the maximum extraction efficiency. A desorption time of 3min
in the GC injector with the desorption temperature of 250°C was
enough for the fiber to desorb the compounds of interest. The chromatograms and morphology study confirmed that the VOCs from
P. c+V8A had distinct differences from V8A alone, as did different
life cycle stages of P. c and different taxa such as Pythium dissotocum.
The study proved that P. c has species and life cycle specific VOCs,
which in turn demonstrated the feasibility of this method as means of
Abstract: In this paper channel estimation techniques are
considered as the support methods for OFDM transmission systems
based on Non Binary LDPC (Low Density Parity Check) codes.
Standard frequency domain pilot aided LS (Least Squares) and
LMMSE (Linear Minimum Mean Square Error) estimators are
investigated. Furthermore, an iterative algorithm is proposed as a
solution exploiting the NB-LDPC channel decoder to improve the
performance of the LMMSE estimator. Simulation results of signals
transmitted through fading mobile channels are presented to compare
the performance of the proposed channel estimators.
Abstract: Knowledge and these notions have become more and
more important and we speak about a knowledge based society
today. A lot of small and big companies have reacted upon these new
challenges. But there is a deep abyss about knowledge conception
and practice between the professional researchers and company - life.
The question of this research was: How can small and mediumsized
companies be equal to the demands of new economy?
Questionnaires were used in this research and a special segment of
the native knowledge based on economy was focused on.
Researchers would have liked to know what the sources of success
are and how they can be in connection with questions of knowledge
acquisition, knowledge transfer, knowledge utilization in small and
medium-sized companies. These companies know that they have to
change their behaviour and thinking, but they are not on the suitable
level that they can compete with bigger or multinational companies.
Abstract: This paper provides new ways to explore the old
problem of failure of information systems development in an
organisation. Based on the theory of cognitive dissonance,
information systems (IS) failure is defined as a gap between what the
users expect from an information system and how well these
expectations are met by the perceived performance of the delivered
system. Bridging the expectation-perception gap requires that IS
professionals make a radical change from being the proprietor of
information systems and products to being service providers. In order
to deliver systems and services that IS users perceive as valuable, IS
people must become expert in determining and assessing users-
expectations and perceptions. It is also suggested that the IS
community, in general, has given relatively little attention to the
front-end process of requirements specification for IS development.
There is a simplistic belief that requirements are obtainable from
users, they are then translatable into a formal specification. The
process of information needs analysis is problematic and worthy of
investigation.
Abstract: The effect of plant growth-promoting rhizobacteria
(PGPR) on seed germination, seedling growth and yield of field
grown maize were evaluated in three experiments. In these
experiments six bacterial strains include P.putida strain R-168,
P.fluorescens strain R-93, P.fluorescens DSM 50090, P.putida
DSM291, A.lipoferum DSM 1691, A.brasilense DSM 1690 were
used. Results of first study showed seed Inoculation significantly
enhanced seed germination and seedling vigour of maize. In second
experiment, leaf and shoot dry weight and also leaf surface area
significantly were increased by bacterial inoculation in both sterile
and non-sterile soil. The results showed that inoculation with
bacterial treatments had a more stimulating effect on growth and
development of plants in nonsterile than sterile soil. In the third
experiment, Inoculation of maize seeds with all bacterial strains
significantly increased plant height, 100 seed weight, number of seed
per ear and leaf area .The results also showed significant increase in
ear and shoot dry weight of maize.
Abstract: This study was conducted using the data collected at the mouth of Jen-Gen River to investigate and analyze chromium (Cr) contained in the sediments, and to evaluate the accumulation of Cr and the degree of its potential risk. The results show that samples collected at all monitoring stations near the mouth of Jen-Gen River contain 92–567 mg/kg of Cr with average of 366±166 mg/kg. The spatial distribution of Cr reveals that the Cr concentration is relatively high in the river mouth region, and gradually diminishes toward the harbor region. This indicates that upstream industrial and municipal wastewater discharges along the river bank are major sources of pollution. The accumulation factor and potential ecological risk index indicate that the sedimentation at Jen-Gen River mouth has the most serious degree of Cr accumulation and the highest ecological potential risk.
Abstract: TTV is an unenveloped circular single-stranded DNA
virus with a diameter of 30-32 nm that first was described in 1997 in
Japan. TTV was detected in various populations without proven
pathology, including blood donors and in patients with chronic HBV
and HCV hepatitis. The aim of this study was to determine the
prevalence of TTV DNA in Iranian patients with chronic hepatitis B
and C. Viral TTV-DNA was studied in 442 samples (202 with HBV,
138 with HCV and 102 controls) collected from west south of Iran.
All extracted serum DNA was amplified by TTV ORF1 gene specific
primers using the semi nested PCR technique. TTV DNA was
detected in the serum of 8.9% and 10.8% patients with chronic
hepatitis B and C, respectively. Prevalence of TTV-DNA in the serum
of 102 controls was 2.9%. Results showed significant relation of TTV
with HBV and HCV in patients by using T test examination (P
Abstract: In this paper, a novel multipurpose audio watermarking
algorithm is proposed based on Vector Quantization (VQ) in Discrete
Cosine Transform (DCT) domain using the codeword labeling and
index-bit constrained method. By using this algorithm, it can fulfill the
requirements of both the copyright protection and content integrity
authentication at the same time for the multimedia artworks. The
robust watermark is embedded in the middle frequency coefficients of
the DCT transform during the labeled codeword vector quantization
procedure. The fragile watermark is embedded into the indices of the
high frequency coefficients of the DCT transform by using the
constrained index vector quantization method for the purpose of
integrity authentication of the original audio signals. Both the robust
and the fragile watermarks can be extracted without the original audio
signals, and the simulation results show that our algorithm is effective
with regard to the transparency, robustness and the authentication
requirements
Abstract: Method of multiple scales is used in the paper in order
to derive an amplitude evolution equation for the most unstable mode
from two-dimensional shallow water equations under the rigid-lid
assumption. It is assumed that shallow mixing layer is slightly curved
in the longitudinal direction and contains small particles. Dynamic
interaction between carrier fluid and particles is neglected. It is
shown that the evolution equation is the complex Ginzburg-Landau
equation. Explicit formulas for the computation of the coefficients of
the equation are obtained.
Abstract: Enterprise Architecture (EA) is a framework for description, coordination and alignment of all activities across the organization in order to achieve strategic goals using ICT enablers. A number of EA-compatible frameworks have been developed. We, in this paper, mainly focus on Federal Enterprise Architecture Framework (FEAF) since its reference models are plentiful. Among these models we are interested here in its business reference model (BRM). The test process is one important subject of an EA project which is to somewhat overlooked. This lack of attention may cause drawbacks or even failure of an enterprise architecture project. To address this issue we intend to use International Software Testing Qualification Board (ISTQB) framework and standard test suites to present a method to improve EA testing process. The main challenge is how to communicate between the concepts of EA and ISTQB. In this paper, we propose a method for integrating these concepts.
Abstract: Unmanned aerial vehicles (UAVs) performing their
operations for a long time have been attracting much attention in
military and civil aviation industries for the past decade. The
applicable field of UAV is changing from the military purpose only to
the civil one. Because of their low operation cost, high reliability and
the necessity of various application areas, numerous development
programs have been initiated around the world. To obtain the optimal
solutions of the design variable (i.e., sectional airfoil profile, wing
taper ratio and sweep) for high performance of UAVs, both the lift and
lift-to-drag ratio are maximized whereas the pitching moment should
be minimized, simultaneously. It is found that the lift force and
lift-to-drag ratio are linearly dependent and a unique and dominant
solution are existed. However, a trade-off phenomenon is observed
between the lift-to-drag ratio and pitching moment. As the result of
optimization, sixty-five (65) non-dominated Pareto individuals at the
cutting edge of design spaces that are decided by airfoil shapes can be
obtained.
Abstract: In recent decade's tourism industry is one of main
reasons of the social and economical development for many
countries; so these countries try to gain more portion of it for
themselves. The excessive natural and cultural touristy potentialities
in Iran made this country to be one of the most attractive sightseeing
areas, although; Iran has got the lowest rate of tourists. Khark Island
is about 32 km. It is a beautiful coral reef coast; about 98% of oil
export has been done through this place. The ecotourism
potentialities of Khark and Kharko Islands (about 3.7km far from
Khark) are the reason to consider ecotourism and the main activity in
these islands which is exporting oil at the same time. This article
refers to way of measuring the geographical coordination of the
place, and the potentialities, ecotourism attraction of the islands and
introduces some ideas in order to expand tourism in the islands.
Abstract: Higher capacities of power plants together with
increased awareness on environmental considerations have led to
taller height of stacks. It is seen that strong wind can result in falling
of stacks. So, aerodynamic consideration of stacks is very important
in order to save the falling of stacks. One stack is not enough in
industries and power sectors and two or three stacks are required for
proper operation of the unit. It is very important to arrange the stacks
in proper way to resist their downfall. The present experimental
study concentrates on the mutual effect of three nearby stacks on
each other at three different arrangements, viz. linear, side-by-side
and triangular. The experiments find out the directions of resultant
forces acting on the stacks in different configurations so that proper
arrangement of supports can be made with respect to the wind
directionality obtained from local meteorological data. One can also
easily ascertain which stack is more vulnerable to wind in
comparison to the others for a particular configuration. Thus, this
study is important in studying the effect of wind force on three stacks
in different arrangements and is very helpful in placing the supports
in proper places in order to avoid failing of stack-like structures due
to wind.
Abstract: Protein-protein interactions (PPI) play a crucial role in many biological processes such as cell signalling, transcription, translation, replication, signal transduction, and drug targeting, etc. Structural information about protein-protein interaction is essential for understanding the molecular mechanisms of these processes. Structures of protein-protein complexes are still difficult to obtain by biophysical methods such as NMR and X-ray crystallography, and therefore protein-protein docking computation is considered an important approach for understanding protein-protein interactions. However, reliable prediction of the protein-protein complexes is still under way. In the past decades, several grid-based docking algorithms based on the Katchalski-Katzir scoring scheme were developed, e.g., FTDock, ZDOCK, HADDOCK, RosettaDock, HEX, etc. However, the success rate of protein-protein docking prediction is still far from ideal. In this work, we first propose a more practical measure for evaluating the success of protein-protein docking predictions,the rate of first success (RFS), which is similar to the concept of mean first passage time (MFPT). Accordingly, we have assessed the ZDOCK bound and unbound benchmarks 2.0 and 3.0. We also createda new benchmark set for protein-protein docking predictions, in which the complexes have experimentally determined binding affinity data. We performed free energy calculation based on the solution of non-linear Poisson-Boltzmann equation (nlPBE) to improve the binding mode prediction. We used the well-studied thebarnase-barstarsystem to validate the parameters for free energy calculations. Besides,thenlPBE-based free energy calculations were conducted for the badly predicted cases by ZDOCK and ZRANK. We found that direct molecular mechanics energetics cannot be used to discriminate the native binding pose from the decoys.Our results indicate that nlPBE-based calculations appeared to be one of the promising approaches for improving the success rate of binding pose predictions.
Abstract: This paper presents a new study on the applications of
optimization and regression analysis techniques for optimal
calculation of partial ratios of four-step helical gearboxes for getting
minimal gearbox length. In the paper, basing on the moment
equilibrium condition of a mechanic system including four gear units
and their regular resistance condition, models for determination of the
partial ratios of the gearboxes are proposed. In particular, explicit
models for calculation of the partial ratios are proposed by using
regression analysis. Using these models, the determination of the
partial ratios is accurate and simple.
Abstract: The ability of pomelo peel, a natural biosorbent, to remove Cd(II) ions from aqueous solution by biosorption was investigated. The experiments were carried out by batch method at 25 °C. The influence of solution pH, initial cadmium ion concentrations and contact times were evaluated. Cadmium ion removal increased significantly as the pH of the solution increased from pH 1 to pH 5. At pH 5, the cadmium ion removal reached a maximum value. The equilibrium process was described well by the Langmuir isotherm model, with a maximum biosorption capacity of 21.83 mg/g. The biosorption was relatively quick, (approx. 20 min). Biosorption kinetics followed a pseudo-second-order model. The result showed that pomelo peel was effective as a biosorbent for removing cadmium ions from aqueous solution. It is a low cost material that shows potential to be applied in wastewater technology for remediation of heavy metal contamination.
Abstract: In contrast to existing methods which do not take into account multiconnectivity in a broad sense of this term, we develop mathematical models and highly effective combination (BIEM and FDM) numerical methods of calculation of stationary and quasistationary temperature field of a profile part of a blade with convective cooling (from the point of view of realization on PC). The theoretical substantiation of these methods is proved by appropriate theorems. For it, converging quadrature processes have been developed and the estimations of errors in the terms of A.Ziqmound continuity modules have been received. For visualization of profiles are used: the method of the least squares with automatic conjecture, device spline, smooth replenishment and neural nets. Boundary conditions of heat exchange are determined from the solution of the corresponding integral equations and empirical relationships. The reliability of designed methods is proved by calculation and experimental investigations heat and hydraulic characteristics of the gas turbine first stage nozzle blade.
Abstract: The issue of classifying objects into one of predefined
groups when the measured variables are mixed with different types
of variables has been part of interest among statisticians in many
years. Some methods for dealing with such situation have been
introduced that include parametric, semi-parametric and nonparametric
approaches. This paper attempts to discuss on a problem
in classifying a data when the number of measured mixed variables is
larger than the size of the sample. A propose idea that integrates a
dimensionality reduction technique via principal component analysis
and a discriminant function based on the location model is discussed.
The study aims in offering practitioners another potential tool in a
classification problem that is possible to be considered when the
observed variables are mixed and too large.
Abstract: Digital signature is a useful primitive to attain the integrity and authenticity in various wire or wireless communications. Proxy signature is one type of the digital signatures. It helps the proxy signer to sign messages on behalf of the original signer. It is very useful when the original signer (e.g. the president of a company) is not available to sign a specific document. If the original signer can not forge valid proxy signatures through impersonating the proxy signer, it will be robust in a virtual environment; thus the original signer can not shift any illegal action initiated by herself to the proxy signer. In this paper, we propose a new proxy signature scheme. The new scheme can prevent the original signer from impersonating the proxy signer to sign messages. The proposed scheme is based on the regular ElGamal signature. In addition, the fair privacy of the proxy signer is maintained. That means, the privacy of the proxy signer is preserved; and the privacy can be revealed when it is necessary.