Abstract: In this paper optimization of routing in ad-hoc
networks is surveyed and a new method for reducing the complexity
of routing algorithms is suggested. Using binary matrices for each
node in the network and updating it once the routing is done, helps
nodes to stop repeating the routing protocols in each data transfer.
The algorithm suggested can reduce the complexity of routing to the
least amount possible.
Abstract: Simulation of occlusal function during laboratory
material-s testing becomes essential in predicting long-term
performance before clinical usage. The aim of the study was to assess
the influence of chamfer preparation depth on failure risk of heat
pressed ceramic crowns with and without zirconia framework by
means of finite element analysis. 3D models of maxillary central
incisor, prepared for full ceramic crowns with different depths of the
chamfer margin (between 0.8 and 1.2 mm) and 6-degree tapered
walls together with the overlying crowns were generated using
literature data (Fig. 1, 2). The crowns were designed with and
without a zirconia framework with a thickness of 0.4 mm. For all
preparations and crowns, stresses in the pressed ceramic crown,
zirconia framework, pressed ceramic veneer, and dentin were
evaluated separately. The highest stresses were registered in the
dentin. The depth of the preparations had no significant influence on
the stress values of the teeth and pressed ceramics for the studied
cases, only for the zirconia framework. The zirconia framework
decreases the stress values in the veneer.
Abstract: This paper presents a studyof the impact of reference
node locations on the accuracy of the indoor positioning systems. In
particular, we analyze the localization accuracy of the RSSI database
mapping techniques, deploying on the IEEE 802.15.4 wireless
networks. The results show that the locations of the reference nodes
used in the positioning systems affect the signal propagation
characteristics in the service area. Thisin turn affects the accuracy of the wireless indoor positioning system. We found that suitable
location of reference nodes could reduce the positioning error upto 35 %.
Abstract: In this paper we intend to ascertain the state of the art on multifingered end-effectors, also known as robotic hands or dexterous robot hands, and propose an experimental setup for an innovative task based design approach, involving cutting edge technologies in motion capture. After an initial description of the capabilities and complexity of a human hand when grasping objects, in order to point out the importance of replicating it, we analyze the mechanical and kinematical structure of some important works carried out all around the world in the last three decades and also review the actuators and sensing technologies used. Finally we describe a new design philosophy proposing an experimental setup for the first stage using recent developments in human body motion capture systems that might lead to lighter and always more dexterous robotic hands.
Abstract: The goal of admission control is to support the Quality
of Service demands of real-time applications via resource reservation
in IP networks. In this paper we introduce a novel Dynamic
Admission Control (DAC) mechanism for IP networks. The DAC
dynamically allocates network resources using the previous network
pattern for each path and uses the dynamic admission algorithm to
improve bandwidth utilization using bandwidth brokers. We evaluate
the performance of the proposed mechanism through trace-driven
simulation experiments in view point of blocking probability,
throughput and normalized utilization.
Abstract: In hypersonic environments, the aerothermal effect
makes it difficult for the optical side windows of optical guided
missiles to withstand high heat. This produces cracking or breaking,
resulting in an inability to function. This study used computational
fluid mechanics to investigate the external cooling jet conditions of
optical side windows. The turbulent models k-ε and k-ω were
simulated. To be in better accord with actual aerothermal
environments, a thermal radiation model was added to examine
suitable amounts of external coolants and the optical window
problems of aero-thermodynamics. The simulation results indicate that
when there are no external cooling jets, because airflow on the optical
window and the tail groove produce vortices, the temperatures in these
two locations reach a peak of approximately 1600 K. When the
external cooling jets worked at 0.15 kg/s, the surface temperature of
the optical windows dropped to approximately 280 K. When adding
thermal radiation conditions, because heat flux dissipation was faster,
the surface temperature of the optical windows fell from 280 K to
approximately 260 K. The difference in influence of the different
turbulence models k-ε and k-ω on optical window surface temperature
was not significant.
Abstract: The question of interethnic and interreligious conflicts
in ex-Yugoslavia receives much attention within the framework of
the international context created after 1991 because of the impact of
these conflicts on the security and the stability of the region of
Balkans and of Europe.
This paper focuses on the rationales leading to the declaration of
independence by Kosovo according to ethnic and religious criteria
and analyzes why these same rationales were not applied in Bosnia
and Herzegovina. The approach undertaken aims at comparatively
examining the cases of Kosovo, and Bosnia and Herzegovina. At the
same time, it aims at understanding the political decision making of
the international community in the case of Kosovo. Specifically, was
this a good political decision for the security and the stability of the
region of Balkans, of Europe, or even for global security and
stability?
This research starts with an overview on the European security
framework post 1991, paying particular attention to Kosovo and
Bosnia and Herzegovina. It then presents the theoretical and
methodological framework and compares the representative cases.
Using the constructivism issue and the comparative methodology, it
arrives at the results of the study. An important issue of the paper is
the thesis that this event modifies the principles of international law
and creates dangerous precedents for regional stability in the
Balkans.
Abstract: Recently, the design is becoming important in product development. The technology which is a strong point of Japan is immediately caught up by the foreign countries, and the price competition begins. Therefore companies tend to plan differentiation of products by the design or a color. The purpose of my work was to consider the optimal color for using by product development. We needed to clarify the thing leading to color preference for this purpose. Two kinds of investigations were made. By the first investigation, we found out that a geographical factor difference existed in color preference. Then, investigation which regarded the difference as latitude was conducted. However, the result expected from the difference in latitude was not obtained. It seems that it is necessary to set up difference of latitude a little more greatly, or to reexamine by other geographical factors.
Abstract: Through 1980s, management accounting researchers
described the increasing irrelevance of traditional control and
performance measurement systems. The Balanced Scorecard (BSC)
is a critical business tool for a lot of organizations. It is a
performance measurement system which translates mission and
strategy into objectives. Strategy map approach is a development
variant of BSC in which some necessary causal relations must be
established. To recognize these relations, experts usually use
experience. It is also possible to utilize regression for the same
purpose. Structural Equation Modeling (SEM), which is one of the
most powerful methods of multivariate data analysis, obtains more
appropriate results than traditional methods such as regression. In the
present paper, we propose SEM for the first time to identify the
relations between objectives in the strategy map, and a test to
measure the importance of relations. In SEM, factor analysis and test
of hypotheses are done in the same analysis. SEM is known to be
better than other techniques at supporting analysis and reporting. Our
approach provides a framework which permits the experts to design
the strategy map by applying a comprehensive and scientific method
together with their experience. Therefore this scheme is a more
reliable method in comparison with the previously established
methods.
Abstract: The objective of this work which is based on the
approach of simultaneous engineering is to contribute to the
development of a CIM tool for the synthesis of functional design
dimensions expressed by average values and tolerance intervals. In
this paper, the dispersions method known as the Δl method which
proved reliable in the simulation of manufacturing dimensions is
used to develop a methodology for the automation of the simulation.
This methodology is constructed around three procedures. The first
procedure executes the verification of the functional requirements by
automatically extracting the functional dimension chains in the
mechanical sub-assembly. Then a second procedure performs an
optimization of the dispersions on the basis of unknown variables.
The third procedure uses the optimized values of the dispersions to
compute the optimized average values and tolerances of the
functional dimensions in the chains. A statistical and cost based
approach is integrated in the methodology in order to take account of
the capabilities of the manufacturing processes and to distribute
optimal values among the individual components of the chains.
Abstract: We investigate an asymmetric connections model with a
dynamic network formation process, using an agent based simulation.
We permit heterogeneity of agents- value. Valuable persons seem
to have many links on real social networks. We focus on this
point of view, and examine whether valuable agents change the
structures of the terminal networks. Simulation reveals that valuable
agents diversify the terminal networks. We can not find evidence that
valuable agents increase the possibility that star networks survive the
dynamic process. We find that valuable agents disperse the degrees
of agents in each terminal network on an average.
Abstract: The increasing popularity of wireless technologies
and mobile computing devices has enabled new application areas and
research. One of these new areas is pervasive systems in urban
environments, because urban environments are characterized by high
concentration of these technologies and devices. In this paper we will
show the process of pervasive system design in urban environments,
using as use case a local zoo in Cali, Colombia. Based on an
ethnographic studio, we present the design of a pervasive system for
urban computing based on service oriented architecture to controlled
environment of Cali Zoo. In this paper, the reader will find a
methodological approach for the design of similar systems, using
data collection methods, conceptual frameworks for urban
environments and considerations of analysis and design of service
oriented systems.
Abstract: In order to compare the performance of the carbon dioxide and HFC-125 heat pumps for medium-and high-temperature heating, both heat pump cycles were optimized using a simulation method. To fairly compare the performance of the cycles by using different working fluids, each cycle was optimized from the viewpoint of heating COP by two design parameters. The first is the gas cooler exit temperature and the other is the ratio of the overall heat conductance of the gas cooler to the combined overall heat conductance of the gas cooler and the evaporator. The inlet and outlet temperatures of secondary fluid of the gas cooler were fixed at 40/90°C and 40/150°C.The results shows that the HFC-125 heat pump has 6% higher heating COP than carbon dioxide heat pump when the heat sink exit temperature is fixed at 90ºC, while the latter outperforms the former when the heat sink exit temperature is fixed at 150ºC under the simulation conditions considered in the present study.
Abstract: The mobile users with Laptops need to have an
efficient access to i.e. their home personal data or to the Internet from
any place in the world, regardless of their location or point of
attachment, especially while roaming outside the home subnet. An
efficient interpretation of packet losses problem that is encountered
from this roaming is to the centric of all aspects in this work, to be
over-highlighted. The main previous works, such as BER-systems,
Amigos, and ns-2 implementation that are considered to be in
conjunction with that problem under study are reviewed and
discussed. Their drawbacks and limitations, of stopping only at
monitoring, and not to provide an actual solution for eliminating or
even restricting these losses, are mentioned. Besides that, the
framework around which we built a Triple-R sequence as a costeffective
solution to eliminate the packet losses and bridge the gap
between subnets, an area that until now has been largely neglected, is
presented. The results show that, in addition to the high bit error rate
of wireless mobile networks, mainly the low efficiency of mobile-IP
registration procedure is a direct cause of these packet losses.
Furthermore, the output of packet losses interpretation resulted an
illustrated triangle of the registration process. This triangle should be
further researched and analyzed in our future work.
Abstract: The objective of this paper is to a design of pattern
classification model based on the back-propagation (BP) algorithm for
decision support system. Standard BP model has done full connection
of each node in the layers from input to output layers. Therefore, it
takes a lot of computing time and iteration computing for good
performance and less accepted error rate when we are doing some
pattern generation or training the network.
However, this model is using exclusive connection in between
hidden layer nodes and output nodes. The advantage of this model is
less number of iteration and better performance compare with standard
back-propagation model. We simulated some cases of classification
data and different setting of network factors (e.g. hidden layer number
and nodes, number of classification and iteration). During our
simulation, we found that most of simulations cases were satisfied by
BP based using exclusive connection network model compared to
standard BP. We expect that this algorithm can be available to
identification of user face, analysis of data, mapping data in between
environment data and information.
Abstract: Optical character recognition of cursive scripts
presents a number of challenging problems in both segmentation and
recognition processes in different languages, including Persian. In
order to overcome these problems, we use a newly developed Persian
word segmentation method and a recognition-based segmentation
technique to overcome its segmentation problems. This method is
robust as well as flexible. It also increases the system-s tolerances to
font variations. The implementation results of this method on a
comprehensive database show a high degree of accuracy which meets
the requirements for commercial use. Extended with a suitable pre
and post-processing, the method offers a simple and fast framework
to develop a full OCR system.
Abstract: In this paper we present a photo mosaic smartphone
application in client-server based large-scale image databases. Photo
mosaic is not a new concept, but there are very few smartphone
applications especially for a huge number of images in the
client-server environment. To support large-scale image databases,
we first propose an overall framework working as a client-server
model. We then present a concept of image-PAA features to efficiently
handle a huge number of images and discuss its lower bounding
property. We also present a best-match algorithm that exploits the
lower bounding property of image-PAA. We finally implement an
efficient Android-based application and demonstrate its feasibility.
Abstract: Tourism industries are rapidly increased for the last
few years especially in Malaysia. In order to attract more tourists,
Malaysian Governance encourages any effort to increase Malaysian
tourism industry. One of the efforts in attracting more tourists in
Malacca, Malaysia is a duck tour. Duck tour is an amphibious
sightseeing tour that works in two types of engines, hence, it required
a huge cost to operate and maintain the vehicle. To other country, it is
not so new but in Malaysia, it is just introduced, thus it does not have
any systematic routing yet. Therefore, this paper proposed an
optimization technique to formulate and schedule this tour to
minimize the operating costs by considering it into Travelling
Salesman Problem (TSP). The problem is then can be solved by one
of the optimization technique especially meta-heuristics approach
such as Tabu Search (TS) and Reactive Tabu Search (RTS).
Abstract: The present study investigated the relationship
between personality characteristics of drivers and the number and
amount of fines they have in a year .This study was carried out on
120 male taxi drivers that worked at least seven hours in a day in
Lamerd - a city in the south of IRAN. Subjects were chosen
voluntarily among those available. Predictive variables were the NEO
–five great personality factors (1. conscientiousness 2. Openness to
Experience 3.Neuroticism4 .Extraversion 5.Agreeableness )
thecriterion variables were the number and amount of fines the
drivers have had the last three years. the result of regression analysis
showed that conscientiousness factor was able to negatively predict
the number and amount of financial fines the drivers had during the
last three years. The openness factor positively predicted the number
of fines they had in last 3 years and the amount of financial fines
during the last year. The extraversion factor both meaningfully and
positively could predict only the amount of financial fines they had
during the last year. Increasing age was associated with decreasing
driving offenses as well as financial loss.The findings can be useful
in recognizing the high-risk drivers and leading them to counseling
centers .They can also be used to inform the drivers about their
personality and it’s relation with their accident rate. Such criteria
would be of great importance in employing drivers in different places
such as companies, offices etc…
Abstract: Next generation wireless/mobile networks will be IP based cellular networks integrating the internet with cellular networks. In this paper, we propose a new architecture for a high speed transport system and a mobile management protocol for mobile internet users in a transport system. Existing mobility management protocols (MIPv6, HMIPv6) do not consider real world fast moving wireless hosts (e.g. passengers in a train). For this reason, we define a virtual organization (VO) and proposed the VO architecture for the transport system. We also classify mobility as VO mobility (intra VO) and macro mobility (inter VO). Handoffs in VO are locally managed and transparent to the CH while macro mobility is managed with Mobile IPv6. And, from the features of the transport system, such as fixed route and steady speed, we deduce the movement route and the handoff disruption time of each handoff. To reduce packet loss during handoff disruption time, we propose pre-registration scheme using pre-registration. Moreover, the proposed protocol can eliminate unnecessary binding updates resulting from sequence movement at high speed. The performance evaluations demonstrate our proposed protocol has a good performance at transport system environment. Our proposed protocol can be applied to the usage of wireless internet on the train, subway, and high speed train.