Abstract: This research presents the development of simulation
modeling for WIP management in semiconductor fabrication.
Manufacturing simulation modeling is needed for productivity
optimization analysis due to the complex process flows involved
more than 35 percent re-entrance processing steps more than 15 times
at same equipment. Furthermore, semiconductor fabrication required
to produce high product mixed with total processing steps varies from
300 to 800 steps and cycle time between 30 to 70 days. Besides the
complexity, expansive wafer cost that potentially impact the
company profits margin once miss due date is another motivation to
explore options to experiment any analysis using simulation
modeling. In this paper, the simulation model is developed using
existing commercial software platform AutoSched AP, with
customized integration with Manufacturing Execution Systems
(MES) and Advanced Productivity Family (APF) for data collections
used to configure the model parameters and data source. Model
parameters such as processing steps cycle time, equipment
performance, handling time, efficiency of operator are collected
through this customization. Once the parameters are validated, few
customizations are made to ensure the prior model is executed. The
accuracy for the simulation model is validated with the actual output
per day for all equipments. The comparison analysis from result of
the simulation model compared to actual for achieved 95 percent
accuracy for 30 days. This model later was used to perform various
what if analysis to understand impacts on cycle time and overall
output. By using this simulation model, complex manufacturing
environment like semiconductor fabrication (fab) now have
alternative source of validation for any new requirements impact
analysis.
Abstract: The after–sales activities are nowadays acknowledged
as a relevant source of revenue, profit and competitive advantage in
most manufacturing industries. Top and middle management,
therefore, should focus on the definition of a structured business
performance measurement system for the after-sales business. The
paper aims at filling this gap, and presents an integrated methodology
for the after-sales network performance measurement, and provides
an empirical application to automotive case companies and their
official service network. This is the first study that presents an
integrated multivariate approach for total assessment and
improvement of after-sale services.
Abstract: This study reports the preparation of soft magnetic
ribbons of Fe-based amorphous alloys using the single-roller melt-spinning technique. Ribbon width varied from 142 mm to 213
mm and, with a thickness of approximately 22 μm ± 2 μm. The microstructure and magnetic properties of the ribbons were
characterized by differential scanning calorimeter (DSC), X-ray diffraction (XRD), vibrating sample magnetometer (VSM), and electrical resistivity measurements (ERM). The amorphous material
properties dependence of the cooling rate and nozzle pressure have uneven surface in ribbon thicknesses are investigated. Magnetic
measurement results indicate that some region of the ribbon exhibits good magnetic properties, higher saturation induction and lower coercivity. However, due to the uneven surface of 213 mm wide
ribbon, the magnetic responses are not uniformly distributed. To
understand the transformer magnetic performances, this study analyzes the measurements of a three-phase 2 MVA amorphous-cored transformer. Experimental results confirm that the transformer with a
ribbon width of 142 mm has better magnetic properties in terms of lower core loss, exciting power, and audible noise.
Abstract: In this study, the kinetic of biogas production was studied by performing a series laboratory experiment using rumen fluid of animal ruminant as inoculums. Cattle manure as substrate was inoculated by rumen fluid to the anaerobic biodigester. Laboratory experiments using 400 ml biodigester were performed in batch operation mode. Given 100 grams of fresh cattle manure was fed to each biodigester and mixed with rumen fluid by manure : rumen weight ratio of 1:1 (MR11). The operating temperatures were varied at room temperature and 38.5 oC. The cumulative volume of biogas produced was used to measure the biodigester performance. The research showed that the rumen fluid inoculated to biodigester gave significant effect to biogas production (P
Abstract: The neurogenic potential of many herbal extracts used
in Indian medicine is hitherto unknown. Extracts derived from
Clitoria ternatea Linn have been used in Indian Ayurvedic system of
medicine as an ingredient of “Medhya rasayana", consumed for
improving memory and longevity in humans and also in treatment of
various neurological disorders. Our earlier experimental studies with
oral intubation of Clitoria ternatea aqueous root extract (CTR) had
shown significant enhancement of learning and memory in postnatal
and young adult Wistar rats. The present study was designed to
elucidate the in vitro effects of 200ng/ml of CTR on proliferation,
differentiation and growth of anterior subventricular zone neural
stem cells (aSVZ NSC-s) derived from prenatal and postnatal rat
pups. Results show significant increase in proliferation and growth of
neurospheres and increase in the yield of differentiated neurons of
aSVZ neural precursor cells (aSVZNPC-s) at 7 days in vitro when
treated with 200ng/ml of CTR as compared to age matched control.
Results indicate that CTR has growth promoting neurogenic effect on
aSVZ neural stem cells and their survival similar to neurotrophic
factors like Survivin, Neuregulin 1, FGF-2, BDNF possibly the basis
for enhanced learning and memory.
Abstract: Hair is a non homogenous complex material which
can be associated with a polymer. It is made up 95% of Keratin.
Hair has a great social significance for human beings. In the High
Middle Ages, for example, long hairs have been reserved for kings
and nobles.
Most common interest in hair is focused on hair growth, hair types
and hair care, but hair is also an important biomaterial which can
vary depending on ethnic origin or on age, hair colour for example
can be a sign of ethnic ancestry or age (dark hair for Asiatic, blond
hair for Caucasian and white hair for old people in general).
In this context, different approaches have been conducted to
determine the differences in mechanical properties and characterize
the fracture topography at the surface of hair depending on its type
and its age.
A tensile testing machine was especially designed to achieve
tensile tests on hair. This device is composed of a microdisplacement
system and a force sensor whose peak load is limited to
3N. The curves and the values extracted from each experiment, allow
us to compare the evolution of the mechanical properties from one
hair to another.
Observations with a Scanning Electron Microscope (SEM) and
with an interferometer were made on different hairs. Thus, it is
possible to access the cuticle state and the fracture topography for
each category.
Abstract: Ant colony optimization (ACO) and its variants are
applied extensively to resolve various continuous optimization
problems. As per the various diversification and intensification
schemes of ACO for continuous function optimization, researchers
generally consider components of multidimensional state space to
generate the new search point(s). However, diversifying to a new
search space by updating only components of the multidimensional
vector may not ensure that the new point is at a significant distance
from the current solution. If a minimum distance is not ensured
during diversification, then there is always a possibility that the
search will end up with reaching only local optimum. Therefore, to
overcome such situations, a Mahalanobis distance-based
diversification with Nelder-Mead simplex-based search scheme for
each ant is proposed for the ACO strategy. A comparative
computational run results, based on nine nonlinear standard test
problems, confirms that the performance of ACO is improved
significantly with the integration of the proposed schemes in the
ACO.
Abstract: Fractional Fourier Transform, which is a
generalization of the classical Fourier Transform, is a powerful tool
for the analysis of transient signals. The discrete Fractional Fourier
Transform Hamiltonians have been proposed in the past with varying
degrees of correlation between their eigenvectors and Hermite
Gaussian functions. In this paper, we propose a new Hamiltonian for
the discrete Fractional Fourier Transform and show that the
eigenvectors of the proposed matrix has a higher degree of
correlation with the Hermite Gaussian functions. Also, the proposed
matrix is shown to give better Fractional Fourier responses with
various transform orders for different signals.
Abstract: In two studies we challenged the well consolidated
position in regret literature according to which the necessary
condition for the emergence of regret is a bad outcome ensuing from
free decisions. Without free choice, and, consequently, personal
responsibility, other emotions, such as disappointment, but not regret,
are supposed to be elicited. In our opinion, a main source of regret is
being obliged by circumstance out of our control to chose an
undesired option. We tested the hypothesis that regret resulting from
a forced choice is more intense than regret derived from a free choice
and that the outcome affects the latter, not the former. Besides, we
investigated whether two other variables – the perception of the level
of freedom of the choice and the choice justifiability – mediated the
relationships between choice and regret, as well as the other four
emotions we examined: satisfaction, anger toward oneself,
disappointment, anger towards circumstances. The two studies were
based on the scenario methodology and implied a 2 x 2 (choice x
outcome) between design. In the first study the foreseen short-term
effects of the choice were assessed; in the second study the
experienced long-term effects of the choice were assessed. In each
study 160 students of the Second University of Naples participated.
Results largely corroborated our hypotheses. They were discussed in
the light of the main theories on regret and decision making.
Abstract: This paper describes the modeling and simulation of an
underwater robot glider used in the shallow-water environment. We
followed the Equations of motion derived by [2] and simplified
dynamic Equations of motion of an underwater glider according to our
underwater glider. A simulation code is built and operated in the
MATLAB Simulink environment so that we can make improvements
to our testing glider design. It may be also used to validate a robot
glider design.
Abstract: In this contribution an innovative platform is being
presented that integrates intelligent agents and evolutionary
computation techniques in legacy e-learning environments. It
introduces the design and development of a scalable and
interoperable integration platform supporting:
I) various assessment agents for e-learning environments,
II) a specific resource retrieval agent for the provision of
additional information from Internet sources matching the
needs and profile of the specific user and
III) a genetic algorithm designed to extract efficient information
(classifying rules) based on the students- answering input
data.
The agents are implemented in order to provide intelligent
assessment services based on computational intelligence techniques
such as Bayesian Networks and Genetic Algorithms.
The proposed Genetic Algorithm (GA) is used in order to extract
efficient information (classifying rules) based on the students-
answering input data. The idea of using a GA in order to fulfil this
difficult task came from the fact that GAs have been widely used in
applications including classification of unknown data.
The utilization of new and emerging technologies like web
services allows integrating the provided services to any web based
legacy e-learning environment.
Abstract: In this paper, the effects of radiation, chemical
reaction and double dispersion on mixed convection heat and mass
transfer along a semi vertical plate are considered. The plate is
embedded in a Newtonian fluid saturated non - Darcy (Forchheimer
flow model) porous medium. The Forchheimer extension and first
order chemical reaction are considered in the flow equations. The
governing sets of partial differential equations are nondimensionalized
and reduced to a set of ordinary differential
equations which are then solved numerically by Fourth order Runge–
Kutta method. Numerical results for the detail of the velocity,
temperature, and concentration profiles as well as heat transfer rates
(Nusselt number) and mass transfer rates (Sherwood number) against
various parameters are presented in graphs. The obtained results are
checked against previously published work for special cases of the
problem and are found to be in good agreement.
Abstract: The Master-s of Public Health (MPH) degree is
growing in popularity among a number of higher education
institutions throughout the world as a distance education graduate
program. This paper offers an overview of program design and
development strategies that promote successful distance delivery of
MPH programs. Design and development challenges are discussed in
terms of type of distance delivery, accreditation, student demand,
faculty development, user needs, course content, and marketing
strategies. The ongoing development of a distance education MPH
program at Utah State University will be used to highlight and
consider various aspects of this important but challenging process.
Abstract: Due to heightened concerns over environmental and economic issues the growing important of air pollution, and the importance of conserving fossil fuel resources in the world, the automotive industry is now forced to produce more fuel efficient, low emission vehicles and new drive system technologies. One of the most promising technologies to receive attention is the hybrid electric vehicle (HEV), which consists of two or more energy sources that supply energy to electric traction motors that in turn drive the wheels. This paper presents the various structures of HEV systems, the basic theoretical knowledge for describing their operation and the general behaviour of the HEV in acceleration, cruise and deceleration phases. The conventional design and sizing of a series HEV is studied. A conventional bus and its series configuration are defined and evaluated using the ADVISOR. In this section the simulation of a standard driving cycle and prediction of its fuel consumption and emissions of the HEV are discussed. Finally the bus performance is investigated to establish whether it can satisfy the performance, fuel consumption and emissions requested. The validity of the simulation has been established by the close conformity between the fuel consumption of the conventional bus reported by the manufacturer to what has achieved from the simulation.
Abstract: Requirements that should be met when determining the regimes of circuits with variable elements are formulated. The interpretation of the variations in the regimes, based on projective geometry, enables adequate expressions for determining and comparing the regimes to be derived. It is proposed to use as the parameters of a generalized equivalent generator of an active two-pole with changeable resistor such load current and voltage which provide the current through this resistor equal to zero.
Abstract: The main purpose of the study was to determine whether students- interpretation achievement differed with the use of various multimedia presentation types. Four groups of students, text only (T), audio only (A), text and audio (TA), text and image (TI), were arranged and they were presented the same story via different types of multimedia presentations. Inference achievement was measured by a critical thinking inference test. Higher mean scores for the TA group compared to the other three groups were found. Also when compared pairwise, interpretation achievement of the TA group differed significantly from scores of the T and TI groups. These differences were interpreted with the increased cognitive load. Increased cognitive load for the TA group may have invited students to put more effort into comprehending the text, thus resulting in better test scores. Findings of the study can be seen as a sign of the importance of learning situations and learning outcomes in multimedia-supported learning environments and may have practical benefits for instructional designers.
Abstract: A two dimensional numerical simulation has been
performed for incompressible and compressible fluid flow through
microchannels in slip flow regime. The Navier-Stokes equations have
been solved in conjunction with Maxwell slip conditions for
modeling flow field associated with slip flow regime. The wall
roughness is simulated with triangular microelements distributed on
wall surfaces to study the effects of roughness on fluid flow. Various
Mach and Knudsen numbers are used to investigate the effects of
rarefaction as well as compressibility. It is found that rarefaction has
more significant effect on flow field in microchannels with higher
relative roughness. It is also found that compressibility has more
significant effects on Poiseuille number when relative roughness
increases. In addition, similar to incompressible models the increase
in average fRe is more significant at low Knudsen number flows but
the increase of Poiseuille number duo to relative roughness is sharper
for compressible models. The numerical results have also validated
with some available theoretical and experimental relations and good
agreements have been seen.
Abstract: In this paper, the construction of a detailed spine
model is presented using the LifeMOD Biomechanics Modeler. The
detailed spine model is obtained by refining spine segments in
cervical, thoracic and lumbar regions into individual vertebra
segments, using bushing elements representing the intervertebral
discs, and building various ligamentous soft tissues between
vertebrae. In the sagittal plane of the spine, constant force will be
applied from the posterior to anterior during simulation to determine
dynamic characteristics of the spine. The force magnitude is
gradually increased in subsequent simulations. Based on these
recorded dynamic properties, graphs of displacement-force
relationships will be established in terms of polynomial functions by
using the least-squares method and imported into a haptic integrated
graphic environment. A thoracolumbar spine model with complex
geometry of vertebrae, which is digitized from a resin spine
prototype, will be utilized in this environment. By using the haptic
technique, surgeons can touch as well as apply forces to the spine
model through haptic devices to observe the locomotion of the spine
which is computed from the displacement-force relationship graphs.
This current study provides a preliminary picture of our ongoing
work towards building and simulating bio-fidelity scoliotic spine
models in a haptic integrated graphic environment whose dynamic
properties are obtained from LifeMOD. These models can be helpful
for surgeons to examine kinematic behaviors of scoliotic spines and
to propose possible surgical plans before spine correction operations.
Abstract: Absorptive characteristics of polyaniline synthesized
in mixture of water and acetonitrile in 50/50 volume ratio was
studied. Synthesized polyaniline in powder shape is used as an
adsorbent to remove toxic hexavalent chromium from aqueous
solutions. Experiments were conducted in batch mode with different
variables such as agitation time, solution pH and initial concentration
of hexavalent chromium. Removal mechanism is the combination of
surface adsorption and reduction. The equilibrium time for removal
of Cr(T) and Cr(VI) was about 2 and 10 minutes respectively. The
optimum pH for total chromium removal occurred at pH 7 and
maximum hexavalent chromium removal took place under acidic
condition at pH 3. Investigating the isothermal characteristics showed
that the equilibrium adsorption data fitted both Freundlich-s and
Langmuir-s isotherms. The maximum adsorption of chromium was
calculated 36.1 mg/g for polyaniline
Abstract: In this study, effects of EGR on CO and HC emissions
of a dual fuel HCCI-DI engine are investigated. Tests were
conducted on a single-cylinder variable compression ratio (VCR)
diesel engine with compression ratio of 17.5. Premixed gasoline is
provided by a carburetor connected to intake manifold and equipped
with a screw to adjust premixed air-fuel ratio, and diesel fuel is
injected directly into the cylinder through an injector at pressure of
250 bars. A heater placed at inlet manifold is used to control the
intake charge temperature. Optimal intake charge temperature was
110-115ºC due to better formation of a homogeneous mixture
causing HCCI combustion. Timing of diesel fuel injection has a great
effect on stratification of in-cylinder charge in HCCI combustion.
Experiments indicated 35 BTDC as the optimum injection timing.
Coolant temperature was maintained 50ºC during the tests. Results
show that increasing engine speed at a constant EGR rate leads to
increase in CO and UHC emissions due to the incomplete
combustion caused by shorter combustion duration and less
homogeneous mixture. Results also show that increasing EGR
reduces the amount of oxygen and leads to incomplete combustion
and therefore increases CO emission due to lower combustion
temperature. HC emission also increases as a result of lower
combustion temperatures.