Abstract: New lead-free ferroelectric relaxor ceramics were
prepared by conventional solid-state synthesis in the BaTiO3-Bi2O3-
Y2O3 systems. Some of these ceramics present a ferroelectric relaxor
with transition temperature close to room temperature. These new
materials are very interesting for applications and can replace leadbased
ceramic to prevent the toxic pollutions during the preparation
state. In the other hand, the energy band diagram shows the
potentiality of these compounds for the solar energy conversion.
Thus, some compositions have been tested successfully for H2
production upon visible light. The best activity occurs in alkaline
media with a rate evolution of about 0.15 mL g-1 mn-1 and a quantum
yield of 1% under polychromatic light.
Abstract: Sugarcane Shoots is an abundantly available
residual resources consisting of lignocelluloses which take it into
the benefit. The present study was focused on utilizing of
sugarcane shoot for reducing sugar production as a substrate in
ethanol production. Physical and chemical pretreatments of
sugarcane shoot were investigated. Results showed that the size of
sugarcane shoot influenced the cellulose content. The maximum
cellulose yield (60 %) can be obtained from alkaline pretreated
sugarcane shoot with 1.0 M NaOH at 30 oC for 90 min. The
cellulose yield reached up to 93.9% (w/w). Enzymatically
hydrolyzed of cellulosic residual in 0.04 citrate buffer (pH 5) with
celluclast 1.5L (0.7 FPU/ml) resulted in the highest amount of
reducing sugar at a rate of 32.1 g/l after 4 h incubation at 50°C,
and 100 oC for 5 min . Cellulose conversion was 55.5%.
Abstract: The effect of porous medium on the capillary instability of a cylindrical interface in the presence of axial electric field has been investigated using viscous potential flow theory. In viscous potential flow, the viscous term in Navier-Stokes equation vanishes as
vorticity is zero but viscosity is not zero. Viscosity enters through normal stress balance in the viscous potential flow theory and tangential stresses are not considered. A dispersion relation that accounts for the growth of axisymmetric waves is derived and stability is discussed theoretically as well as numerically. Stability criterion is given by critical value of applied electric field as well as critical wave number. Various graphs have been drawn to show the effect of various physical parameters such as electric field, viscosity ratio, permittivity ratio on the stability of the system. It has been observed that the axial electric field and porous medium both have stabilizing effect on the stability of the system.
Abstract: In the study of honeycomb crushing under quasistatic loading, two parameters are important, the mean crushing stress and the wavelength of the folding mode. The previous theoretical models did not consider the true cylindrical curvature effects and the flow stress in the folding mode of honeycomb material. The present paper introduces a modification on Wierzbicki-s model based on considering two above mentioned parameters in estimating the mean crushing stress and the wavelength through implementation of the energy method. Comparison of the results obtained by the new model and Wierzbicki-s model with existing experimental data shows better prediction by the model presented in this paper.
Abstract: The method of modeling is the key technology for
digital mockup (DMU). Based upon the developing for mechanical
product DMU, the theory, method and approach for virtual
environment (VE) and virtual object (VO) were studied. This paper
has expounded the design goal and architecture of DMU system,
analyzed the method of DMU application, and researched the general
process of physics modeling and behavior modeling.
Abstract: In this paper real money demand function is analyzed
within multivariate time-series framework. Cointegration approach is
used (Johansen procedure) assuming interdependence between
money demand determinants, which are nonstationary variables. This
will help us to understand the behavior of money demand in Croatia,
revealing the significant influence between endogenous variables in
vector autoregrression system (VAR), i.e. vector error correction
model (VECM). Exogeneity of the explanatory variables is tested.
Long-run money demand function is estimated indicating slow speed
of adjustment of removing the disequilibrium. Empirical results
provide the evidence that real industrial production and exchange
rate explains the most variations of money demand in the long-run,
while interest rate is significant only in short-run.
Abstract: The notions of I-vague normal groups with membership
and non-membership functions taking values in an involutary dually
residuated lattice ordered semigroup are introduced which generalize
the notions with truth values in a Boolean algebra as well as those
usual vague sets whose membership and non-membership functions
taking values in the unit interval [0, 1]. Various operations and
properties are established.
Abstract: It is not easy to imagine how the existing city can be
converted to the principles of sustainability, however, the need for
innovation, requires a pioneering phase which must address the main
problems of rehabilitation of the operating models of the city. Today,
however, there is a growing awareness that the identification and
implementation of policies and measures to promote the adaptation,
resilience and reversibility of the city, require the contribution of our
discipline. This breakthrough is present in some recent international
experiences of Climate Plans, in which the envisaged measures are
closely interwoven with those of urban planning. These experiences,
provide some answers principle questions, such as: how the strategies
to combat climate can be integrated in the instruments of the local
government; what new and specific analysis must be introduced in
urban planning in order to understand the issues of urban
sustainability, and how the project compares with different spatial
scales.
Abstract: Solid waste can be considered as an urban burden or
as a valuable resource depending on how it is managed. To meet the
rising demand for energy and to address environmental concerns, a
conversion from conventional energy systems to renewable resources
is essential. For the sustainability of human civilization, an
environmentally sound and techno-economically feasible waste
treatment method is very important to treat recyclable waste. Several
technologies are available for realizing the potential of solid waste as
an energy source, ranging from very simple systems for disposing of
dry waste to more complex technologies capable of dealing with
large amounts of industrial waste. There are three main pathways for
conversion of waste material to energy: thermo chemical,
biochemical and physicochemical. This paper investigates the thermo
chemical conversion of solid waste for energy recovery. The
processes, advantages and dis-advantages of various thermo chemical
conversion processes are discussed and compared. Special attention
is given to Gasification process as it provides better solutions
regarding public acceptance, feedstock flexibility, near-zero
emissions, efficiency and security. Finally this paper presents
comparative statements of thermo chemical processes and introduces
an integrated waste management system.
Abstract: This paper explores the plant maintenance management system that has been used by giant oil and gas company in Malaysia. The system also called as PMMS used to manage the upstream operations for more than 100 plants of the case study company. Moreover, from the observations, focus group discussion with PMMS personnel and application through simulation (SAP R/3), the paper reviews the step-by-step approach and the elements that required for the PMMS. The findings show that the PMMS integrates the overall business strategy in upstream operations that consist of asset management, work management and performance management. In addition, PMMS roles are to help operations personnel organize and plan their daily activities, to improve productivity and reduce equipment downtime and to help operations management analyze the facilities and create performance, and to provide and maintain the operational effectiveness of the facilities.
Abstract: Ten lactating multiparous Holstein cows were used in
a cross-over design with two dietary treatments and 28-d periods
(with 14 d as an adaptation) to study the effect of restaurant fat on
milk production and composition. Each cow was offered 14.7 kg
DM /d of the basal concentrate diet based on barley and corn (crude
protein = 17.7%, neutral detergent fiber = 23.5%, and acid detergent
fiber = 5.8% of dry matter) with free access to alfalfa. Dietary
treatments were arranged as supplying each cow with 0 (CONTROL)
or 150 g/day (RF) of restaurant fat. Supplemental RF did not
significantly (P > 0.25) affect milk yield, composition, and
composition yields, except for milk fat contents. Milk fat contents
were depressed (P < 0.05) with supplemental RF. Our results indicate
that RF could depress milk fat without affecting milk yield and that
the depression in milk fat in response to RF precedes the depression
in milk yield.
Abstract: Six Sigma is a well known discipline that reduces
variation using complex statistical tools and the DMAIC model. By
integrating Goldratts-s Theory of Constraints, the Five Focusing
Points and System Thinking tools, Six Sigma projects can be selected
where it can cause more impact in the company. This research
defines an integrated model of six sigma and constraint management
that shows a step-by-step guide using the original methodologies
from each discipline and is evaluated in a case study from the
production line of a Automobile engine monoblock V8, resulting in
an increase in the line capacity from 18.7 pieces per hour to 22.4
pieces per hour, a reduction of 60% of Work-In-Process and a
variation decrease of 0.73%.
Abstract: The polyfunctional and highly reactive bio-polymer,
the chitosan was first regioselectively converted into dialkylated
chitosan using dimsyl anionic solution(NaH in DMSO) and
bromodecane after protecting amino groups by phthalic anhydride.
The dibenzo-18-crown-6-ether, on the other hand, was converted into
its carbonyl derivatives via Duff reaction prior to incorporate into
chitosan by Schiff base formation. Thus formed diformylated
dibenzo-18-crown-6-ether was condensed with lipophilic chitosan to
prepare the novel solvent extraction reagent. The products were
characterized mainly by IR and 1H-NMR. Hence, the multidentate
crown ether-embedded polyfunctional bio-material was tested for
extraction of Pd(II) and Pt(IV) in aqueous solution.
Abstract: A personal estimate of a health risk may not
correspond to a scientific assessment of the health risk. Hence, there
is a need to investigate perceived health risks in the public. In this
study, a young, educated and healthy group of people from a tertiary
institute were questioned about their health concerns. Ethics
clearance was obtained and data was collected by means of a
questionnaire. 362 students participated in the study. Tobacco use,
heavy alcohol drinking, illicit drugs, unsafe sex and potential
carcinogens were perceived to be the five greatest threats to health in
this cohort. On the other hand natural health products,
unemployment, unmet contraceptive needs, family violence and
homelessness were felt to be the least perceived health risks.
Nutrition-related health risks as well as health risks due to physical
inactivity and obesity were not perceived as major health threats.
Such a study of health perceptions may guide health promotion
campaigns.
Abstract: Radiofrequency (RF) lesioning of nerves have been commonly used to alleviate chronic pain, where RF current preventing transmission of pain signals through the nerve by heating the nerve causing the pain. There are some factors that affect the temperature distribution and the nerve lesion size, one of these factors is the inhomogeneities in the tissue medium. Our objective is to calculate the temperature distribution and the nerve lesion size in an inhomogeneous medium surrounding the RF electrode. A two 3-D finite element models are used to compare the temperature distribution in the homogeneous and inhomogeneous medium. Also the effect of temperature-dependent electric conductivity on maximum temperature and lesion size is observed. Results show that the presence of an inhomogeneous medium around the RF electrode has a valuable effect on the temperature distribution and lesion size. The dependency of electric conductivity on tissue temperature increased lesion size.
Abstract: Negation is useful in the majority of the real world applications. However, its introduction leads to semantic and canonical problems. We propose in this paper an approach based on stratification to deal with negation problems. This approach is based on an extension of predicates nets. It is characterized with two main contributions. The first concerns the management of the whole class of stratified programs. The second contribution is related to usual operations optimizations on stratified programs (maximal stratification, incremental updates ...).
Abstract: A combination of photosynthetic bacteria along with
anaerobic acidogenic bacteria is an ideal option for efficient
hydrogen production. In the present study, the optimum
concentration of substrates for the growth of Rhodobacter
sphaeroides was found by response surface methodology. The
optimum combination of three individual fatty acids was determined
by Box Behnken design. Increase of volatile fatty acid concentration
decreased the growth. Combination of sodium acetate and sodium
propionate was most significant for the growth of the organism. The
results showed that a maximum biomass concentration of 0.916 g/l
was obtained when the concentrations of acetate, propionate and
butyrate were 0.73g/l,0.99g/l and 0.799g/l, respectively. The growth
was studied under an optimum concentration of volatile fatty acids
and at a light intensity of 3000 lux, initial pH of 7 and a temperature
of 35°C.The maximum biomass concentration of 0.92g/l was
obtained which verified the practicability of this optimization.
Abstract: When earthquakes strike the city it results in great loss of lives. The present paper talks about a new innovative design system (MegEifel) for buildings which has a mechanism to mitigate deaths in case any earthquake strikes the city. If buildings will be designed according to MegEifel design then the occupants of the building will be safe even when they are in sleep or are doing day wise activities during the time earthquake strikes. The core structure is suggested to be designed on the principle that more deep the foundations are, the harder it is to uproot the structure. The buildings will have an Eifel rod dug deep into earth which will help save lives in tall buildings when earthquake strikes. This design takes a leverage of protective shells to save lives.
Abstract: This article is devoted to the numerical solution of
large-scale quadratic eigenvalue problems. Such problems arise in
a wide variety of applications, such as the dynamic analysis of
structural mechanical systems, acoustic systems, fluid mechanics,
and signal processing. We first introduce a generalized second-order
Krylov subspace based on a pair of square matrices and two initial
vectors and present a generalized second-order Arnoldi process for
constructing an orthonormal basis of the generalized second-order
Krylov subspace. Then, by using the projection technique and the
refined projection technique, we propose a restarted generalized
second-order Arnoldi method and a restarted refined generalized
second-order Arnoldi method for computing some eigenpairs of largescale
quadratic eigenvalue problems. Some theoretical results are also
presented. Some numerical examples are presented to illustrate the
effectiveness of the proposed methods.
Abstract: Efforts to secure supervisory control and data acquisition
(SCADA) systems must be supported under the guidance of
sound security policies and mechanisms to enforce them. Critical
elements of the policy must be systematically translated into a format
that can be used by policy enforcement components. Ideally, the
goal is to ensure that the enforced policy is a close reflection of
the specified policy. However, security controls commonly used to
enforce policies in the IT environment were not designed to satisfy
the specific needs of the SCADA environment. This paper presents
a language, based on the well-known XACML framework, for the
expression of authorization policies for SCADA systems.