Abstract: The aim of this study is to analyze the role and
effectiveness of internal mechanism (audit committee) of corporate
governance on credit institutions performance in Croatia. Based on
research objective, sample of 78 credit institutions listed on Zagreb
Stock Exchange, from 2007 to 2012, has been collected and
efficiency index of audit committee (EIAC) has been created. Based
on the sample and created EIAC, conclusions are as follows: audit
committees of credit institutions have medium efficiency, based on
EIAC measurement; there is a significant difference in audit
committee effectiveness, in observed period; there is no positive
relationship between audit committee effectiveness and credit
institution performance; there is a significant difference between
level of audit committee effectiveness and audit firm type. Future
research should contain increased number of elements in EIAC
creation and increased sample, for all obligators who need to
establish audit committee.
Abstract: The influences of cell-free solutions (CFSs) of lactic
acid bacteria (LAB) on cadaverine and other biogenic amines
production by Listeria monocytogenes and Staphylococcus aureus
were investigated in lysine decarboxylase broth (LDB) using HPLC.
Cell free solutions were prepared from Lactococcus lactis subsp.
lactis, Leuconostoc mesenteroides subsp. cremoris, Pediococcus
acidilactici and Streptococcus thermophiles. Two different
concentrations that were 50% and 25% CFS and the control without
CFSs were prepared. Significant variations on biogenic amine
production were observed in the presence of L. monocytogenes and S.
aureus (P < 0.05). The function of CFS on biogenic amine production
by foodborne pathogens varied depending on strains and specific
amine. Cadaverine formation by L. monocytogenes and S. aureus in
control were 500.9 and 948.1 mg/L, respectively while the CFSs of
LAB induced 4-fold lower cadaverine production by L.
monocytogenes and 7-fold lower cadaverine production by S. aureus.
The CFSs resulted in strong decreases in cadaverine and putrescine
production by L. monocytogenes and S. aureus, although remarkable
increases were observed for histamine, spermidine, spermine,
serotonin, dopamine, tyramine and agmatine in the presence of LAB
in lysine decarboxylase broth.
Abstract: A nanocrystalline thin film of ZnSe was successfully
electrodeposited on copper substrate using a non-aqueous solution
and subsequently annealed in air at 400°C. XRD analysis indicates
the polycrystalline deposit of (111) plane in both the cases. The
sharpness of the peak increases due to annealing of the film and
average grain size increases to 20 nm to 27nm. SEM photograph
indicate that grains are uniform and densely distributed over the
surface. Annealing increases the average grain size by 20%. The EDS
spectroscopy shows the ratio of Zn & Se is 1.1 in case of annealed
film. AFM analysis indicates the average roughness of the film
reduces from 181nm to 165nm due to annealing of the film. The
bandgap also decreases from 2.71eV to 2.62eV.
Abstract: Livestock is one of the fastest-growing sectors in
agriculture. If carefully managed, have potential opportunities for
economic growth, food sovereignty and food security. In this study
we mainly analyse and compare long-term i.e. for year 2030 climate
variability impact on predicted productivity of meat i.e. beef, mutton
and poultry for the Kingdom of Saudi Arabia w.r.t three factors i.e. i)
climatic-change vulnerability ii) CO2 fertilization and iii) water
scarcity and compare the results with two countries of the region i.e.
Iraq and Yemen. We do the analysis using data from diverse sources,
which was extracted, transformed and integrated before usage. The
collective impact of the three factors had an overall negative effect on
the production of meat for all the three countries, with adverse impact
on Iraq. High similarity was found between CO2 fertilization
(effecting animal fodder) and water scarcity i.e. higher than that
between production of beef and mutton for the three countries
considered. Overall, the three factors do not seem to be favorable for
the three Middle-East countries considered. This points to possibility
of a vegetarian year 2030 based on dependency on indigenous livestock
population.
Abstract: The main objective of aircraft aerodynamics is to
enhance the aerodynamic characteristics and maneuverability of the
aircraft. This enhancement includes the reduction in drag and stall
phenomenon. The airfoil which contains dimples will have
comparatively less drag than the plain airfoil. Introducing dimples on
the aircraft wing will create turbulence by creating vortices which
delays the boundary layer separation resulting in decrease of pressure
drag and also increase in the angle of stall. In addition, wake
reduction leads to reduction in acoustic emission. The overall
objective of this paper is to improve the aircraft maneuverability by
delaying the flow separation point at stall and thereby reducing the
drag by applying the dimple effect over the aircraft wing. This project
includes both computational and experimental analysis of dimple
effect on aircraft wing, using NACA 0018 airfoil. Dimple shapes of
Semi-sphere, hexagon, cylinder, square are selected for the analysis;
airfoil is tested under the inlet velocity of 30m/s and 60m/s at
different angle of attack (5˚, 10˚, 15˚, 20˚, and 25˚). This analysis
favors the dimple effect by increasing L/D ratio and thereby
providing the maximum aerodynamic efficiency, which provides the
enhanced performance for the aircraft.
Abstract: Anxiety is a common psychological problem and also
implicated as a contributor to many chronic diseases which decreased
quality of life even with pharmacological treatment. At the present
time several yogic practices- meditation, pranayama, and mantra,
etcetera are playing important role in treating physiological and
psychological problems. Hence, the present investigation is aimed to
see the effect of Trataka on the level of anxiety among adolescents.
For the present study, a sample of 30 adolescents belonging to the
age range 20-30 years was selected from Devsanskriti Vishwa
Vidyalaya Haridwar through random sampling. In this investigation,
Sinha’s Comprehensive anxiety test has been used to measure the
level of anxiety. Statistical analysis has been done by using t-test.
Findings of this study reveal that Trataka significantly decreases the
level of anxiety among adolescents.
Abstract: The goal of this study is to identify success factors
that could influence the ISMS self-implementation in government
sector from qualitative perspective. This study is based on a case
study in one of the Malaysian government agency. Semi-structured
interviews involving five key informants were conducted to examine
factors addressed in the conceptual framework. Subsequently,
thematic analysis was executed to describe the influence of each
factor on the success implementation of ISMS. The result of this
study indicates that management commitment, implementer
commitment and implementer competency are part of the success
factors for ISMS self-implementation in Malaysian Government
Sector.
Abstract: Potato (Solanum tuberosum L.) is one of the major
vegetable crops that are grown world –wide because of its economic
importance. This experiment investigated the effect of local sands
(River Base, Al-Ekader and Karbala) on number and total weight of
minitubers. Statistical analysis revealed that there were no significant
differences among sand cultures in number of stem/plant, chlorophyll
index and tubers dry weight. River Base sand had the highest plant
height (74.9 cm), leaf number/plant number (39.3), leaf area (84.4
dcm2⁄plant), dry weight/plant (26.31), tubers number/plant (8.5),
tubers weight/plant (635.53 gm) and potato tuber yields/trove (28.60
kg), whereas the Karbala sand had lower performance. All the
characters had positive and significant correlation with yields except
the traits number of stem and tuber dry weight.
Abstract: This study aims to analyze ceramic employees’
occupational health and safety training expectations. To that general
objective, the study tries to examine whether occupational health and
safety training expectations of ceramic employees meaningfully
differentiate depending on demographic features and professional,
social and economic conditions. For this purpose, a questionnaire was
developed by the researcher. The research data were collected
through this questionnaire called “Questionnaire of Occupational
Health and Safety Training Expectation” (QSOHSTE). QSOHSTE
was applied to 125 ceramic employees working in Kütahya, Turkey.
Data obtained from questionnaire were analyzed via SPSS 21.
The findings, obtained from the study, revealed that employees’
agreement level to occupational health and safety training expectation
statements is generally high-level. The findings reveal that employees
expect professional interest such as increased development and
investment, preventive measures for accidents, interventions to
evaluate the working conditions, establishment of safe working
environments and sustainment of adequate equipment for
occupational health and safety training process.
Besides these findings, employees’ agreement level to
occupational health and safety training expectation statements also
varies in terms of educational level, professional seniority, income
level and perception of economic condition.
Abstract: The rhizome of Java grass, Cyperus rotundus was
extracted different organic polar and non-polar solvents and
performed the in vitro antiviral and immunostimulant activities
against White Spot Syndrome Virus (WSSV) and Vibrio harveyi
respectively. Based on the initial screening the ethyl acetate extract of
C. rotundus was strong activities and further it was purified through
silica column chromatography and the fractions were screened again
for antiviral and immunostimulant activity. Among the different
fractions screened against the WSSV and V. harveyi, the fractions, FIII
to FV had strong activities. In order to study the in vivo influence
of C. rotundus, the fractions (F-III to FV) were pooled and delivered
to the F. indicus through artificial feed for 30 days. After the feeding
trail the experimental and control diet fed F. indicus were challenged
with virulent WSSV and studied the survival, molecular diagnosis,
biochemical, haematological, and immunological parameters.
Surprisingly, the pooled fractions (F-IV to FVI) incorporated diets
helped to significantly (P
Abstract: The paper presents a practical three-phase PWM
inverter suitable for low voltage, low rating energy efficient systems.
The work in the paper is conducted with the view to establishing the
significance of the loss contribution from the PWM inverter in the
determination of the complete losses of a photovoltaic (PV) arraypowered
induction motor drive water pumping system. Losses
investigated include; conduction and switching loss of the devices
and gate drive losses. It is found that the PWM inverter operates at a
reasonable variable efficiency that does not fall below 92%
depending on the load. The results between the simulated and
experimental results for the system with or without a maximum
power tracker (MPT) compares very well, within an acceptable range
of 2% margin.
Abstract: In this paper 3D FEM analysis was carried out on
double lap bonded joint with composite adherents subjected to
dynamic shear. The adherents are made of Carbon/Epoxy while the
adhesive is epoxy Araldite 2031. The maximum average shear stress
and the stress homogeneity in the adhesive layer were examined.
Three fibers textures were considered: UD; 2.5D and 3D with same
volume fiber then a parametric study based on changing the thickness
and the type of fibers texture in 2.5D was accomplished. Moreover,
adherents’ dissimilarity was also investigated. It was found that the
main parameter influencing the behavior is the longitudinal stiffness
of the adherents. An increase in the adherents’ longitudinal stiffness
induces an increase in the maximum average shear stress in the
adhesive layer and an improvement in the shear stress homogeneity
within the joint. No remarkable improvement was observed for
dissimilar adherents.
Abstract: This paper proposes a rotational invariant texture
feature based on the roughness property of the image for psoriasis
image analysis. In this work, we have applied this feature for image
classification and segmentation. The fuzzy concept is employed to
overcome the imprecision of roughness. Since the psoriasis lesion is
modeled by a rough surface, the feature is extended for calculating
the Psoriasis Area Severity Index value. For classification and
segmentation, the Nearest Neighbor algorithm is applied. We have
obtained promising results for identifying affected lesions by using
the roughness index and severity level estimation.
Abstract: Ti6Al4V alloy is highly used in the automotive and
aerospace industry due to its good machining characteristics. Micro
EDM drilling is commonly used to drill micro hole on extremely hard
material with very high depth to diameter ratio. In this study, the
parameters of micro-electrical discharge machining (EDM) in drilling
of Ti6Al4V alloy is optimized for higher machining accuracy with
less hole-dilation and hole taper ratio. The micro-EDM machining
parameters includes, peak current and pulse on time. Fuzzy analysis
was developed to evaluate the machining accuracy. The analysis
shows that hole-dilation and hole-taper ratio are increased with the
increasing of peak current and pulse on time. However, the surface
quality deteriorates as the peak current and pulse on time increase.
The combination that gives the optimum result for hole dilation is
medium peak current and short pulse on time. Meanwhile, the
optimum result for hole taper ratio is low peak current and short pulse
on time.
Abstract: Maize constitutes a major agrarian production for use
by the vast population but despite its economic importance; it has not
been produced to meet the economic needs of the country. Achieving
optimum yield in maize can meaningfully be supported by land
suitability analysis in order to guarantee self-sufficiency for future
production optimization. This study examines land suitability for
maize production through the analysis of the physicochemical
variations in soil properties and other land attributes over space using
a Geographic Information System (GIS) framework.
Physicochemical parameters of importance selected include slope,
landuse, physical and chemical properties of the soil, and climatic
variables. Landsat imagery was used to categorize the landuse,
Shuttle Radar Topographic Mapping (SRTM) generated the slope and
soil samples were analyzed for its physical and chemical components.
Suitability was categorized into highly, moderately and marginally
suitable based on Food and Agricultural Organisation (FAO)
classification, using the Analytical Hierarchy Process (AHP)
technique of GIS. This result can be used by small scale farmers for
efficient decision making in the allocation of land for maize
production.
Abstract: Established objective and subjective preconditions for
entrepreneurship, forming the business organically related whole, are
the necessary condition of successful entrepreneurial activities.
Objective preconditions for entrepreneurship are developed by
market economy that should stimulate entrepreneurship by allowing
the use of economic opportunities for all those who want to do
business in respective field while providing guarantees to all owners
and creating a stable business environment for entrepreneurs.
Subjective preconditions of entrepreneurship are formed primarily by
personal characteristics of the entrepreneur. These are his properties,
abilities, skills, physiological and psychological preconditions which
may be inherited, inborn or sequentially developed and obtained
during his life on the basis of education and influences of
surrounding environment. The paper is dealing with issues of
objective and subjective preconditions for entrepreneurship and
provides their analysis in view of the current situation in Slovakia. It
presents risks of the business environment in Slovakia that the Slovak
managers considered the most significant in 2014 and defines the
dominant attributes of the entrepreneur in the current business
environment in Slovakia.
Abstract: Analysis of the properties of coconut (Cocos nucifera)
and its oil was evaluated in this work using standard analytical
techniques. The analyses carried out include proximate composition
of the fruit, extraction of oil from the fruit using different process
parameters and physicochemical analysis of the extracted oil. The
results showed the percentage (%) moisture, crude lipid, crude
protein, ash and carbohydrate content of the coconut as 7.59, 55.15,
5.65, 7.35 and 19.51 respectively. The oil from the coconut fruit was
odourless and yellowish liquid at room temperature (30oC). The
treatment combinations used (leaching time, leaching temperature
and solute: solvent ratio) showed significant differences (P
Abstract: Risk analysis is considered as a fundamental aspect
relevant for ensuring the level of critical infrastructure protection,
where the critical infrastructure is seen as system, asset or its part
which is important for maintaining the vital societal functions. Article
actually discusses and analyzes the potential application of selected
tools of information support for the implementation and within the
framework of risk analysis and critical infrastructure protection. Use
of the information in relation to their risk analysis can be viewed as a
form of simplifying the analytical process. It is clear that these
instruments (information support) for these purposes are countless, so
they were selected representatives who have already been applied in
the selected area of critical infrastructure, or they can be used. All
presented fact were the basis for critical infrastructure resilience
evaluation methodology development.
Abstract: Employers occupational safety and health training
obligations are regulated in 89/391/EEC Framework Directive and
also in 6331 numbered Occupational Health and Safety Law in
Turkey.
The main objective of this research is to determine and evaluate
the employers’ occupational health and safety training obligations in
Framework Directive in comparison with the 6331 numbered
Occupational Health and Safety Law and to examine training
principles in Turkey. For this purpose, employers’ occupational
health and safety training obligations examined in Framework
Directive and Occupational Health and Safety Law. This study
carried out through comparative scanning model and literature model.
The research data were collected through European Agency and
ministry legislations.
As a result, employers’ occupational health and safety training
obligations in the 6331 numbered Occupational Health and Safety
Law are compatible with the 89/391/EEC numbered Framework
Directive and training principles are determined by in different ways
like the trained workers, training issues, training period, training time
and trainers. In this study, employers’ training obligations are
evaluated in detail.
Abstract: The aim of this work is to build a model based on
tissue characterization that is able to discriminate pathological and
non-pathological regions from three-phasic CT images. With our
research and based on a feature selection in different phases, we are
trying to design a neural network system with an optimal neuron
number in a hidden layer. Our approach consists of three steps:
feature selection, feature reduction, and classification. For each
region of interest (ROI), 6 distinct sets of texture features are
extracted such as: first order histogram parameters, absolute gradient,
run-length matrix, co-occurrence matrix, autoregressive model, and
wavelet, for a total of 270 texture features. When analyzing more
phases, we show that the injection of liquid cause changes to the high
relevant features in each region. Our results demonstrate that for
detecting HCC tumor phase 3 is the best one in most of the features
that we apply to the classification algorithm. The percentage of
detection between pathology and healthy classes, according to our
method, relates to first order histogram parameters with accuracy of
85% in phase 1, 95% in phase 2, and 95% in phase 3.