Abstract: The flow field over a three dimensional pole barn
characterized by a cylindrical roof has been numerically investigated.
Wind pressure and viscous loads acting on the agricultural building
have been analyzed for several incoming wind directions, so as to
evaluate the most critical load condition on the structure. A constant
wind velocity profile, based on the maximum reference wind speed in
the building site (peak gust speed worked out for 50 years return
period) and on the local roughness coefficient, has been simulated.
In order to contemplate also the hazard due to potential air
wedging between the stored hay and the lower part of the ceiling, the
effect of a partial filling of the barn has been investigated.
The distribution of wind-induced loads on the structure have been
determined, allowing a numerical quantification of the effect of wind
direction on the induced stresses acting on a hemicylindrical roof.
Abstract: This paper describes the gain and noise performances
of discrete Raman amplifier as a function of fiber lengths and the
signal input powers for different pump configurations. Simulation has
been done by using optisystem 7.0 software simulation at signal
wavelength of 1550 nm and a pump wavelength of 1450nm. The
results showed that the gain is higher in bidirectional pumping than in
counter pumping, the gain changes with increasing the fiber length
while the noise figure remain the same for short fiber lengths and the
gain saturates differently for different pumping configuration at
different fiber lengths and power levels of the signal.
Abstract: Much time series data is generally from continuous dynamic system. Firstly, this paper studies the detection of the nonlinearity of time series from continuous dynamics systems by applying the Phase-randomized surrogate algorithm. Then, the Delay Vector Variance (DVV) method is introduced into nonlinearity test. The results show that under the different sampling conditions, the opposite detection of nonlinearity is obtained via using traditional test statistics methods, which include the third-order autocovariance and the asymmetry due to time reversal. Whereas the DVV method can perform well on determining nonlinear of Lorenz signal. It indicates that the proposed method can describe the continuous dynamics signal effectively.
Abstract: It is observed that the Weighted least-square (WLS)
technique, including the modifications, results in equiripple error
curve. The resultant error as a percent of the ideal value is highly
non-uniformly distributed over the range of frequencies for which the
differentiator is designed. The present paper proposes a modification
to the technique so that the optimization procedure results in lower
maximum relative error compared to the ideal values. Simulation
results for first order as well as higher order differentiators are given
to illustrate the excellent performance of the proposed method.
Abstract: This study examines perception of environmental
approach in small and medium-sized enterprises (SMEs) – the
process by which firms integrate environmental concern into
business. Based on a review of the literature, the paper synthesizes
focus on environmental issues with the reflection in a case study in
the Czech Republic. Two themes of corporate environmentalism are
discussed – corporate environmental orientation and corporate
stances toward environmental concerns. It provides theoretical
material on greening organizational culture that is helpful in
understanding the response of contemporary business to
environmental problems. We integrate theoretical predictions with
empirical findings confronted with reality. Scales to measure these
themes are tested in a survey of managers in 229 Czech firms. We
used the process of in-depth questioning. The research question was
derived and answered in the context of the corresponding literature
and conducted research. A case study showed us that environmental
approach is variety different (depending on the size of the firm) in
SMEs sector. The results of the empirical mapping demonstrate
Czech company’s approach to environment and define the problem
areas and pinpoint the main limitation in the expansion of
environmental aspects. We contribute to the debate for recognition of
the particular role of environmental issues in business reality.
Abstract: The removal of hydrogen sulphide is required for reasons of health, odour problems, safety and corrosivity problems. The means of removing hydrogen sulphide mainly depend on its concentration and kind of medium to be purified. The paper deals with a method of hydrogen sulphide removal from the air by its catalytic oxidation to elemental sulphur with the use of Fe-EDTA complex. The possibility of obtaining fibrous filtering materials able to remove small concentrations of H2S from the air were described. The base of these materials is fibrous ion exchanger with Fe(III)- EDTA complex immobilized on their functional groups. The complex of trivalent iron converts hydrogen sulphide to elemental sulphur. Bivalent iron formed in the reaction is oxidized by the atmospheric oxygen, so complex of trivalent iron is continuously regenerated and the overall process can be accounted as pseudocatalytic. In the present paper properties of several fibrous catalysts based on ion exchangers with different chemical nature (weak acid,weak base and strong base) were described. It was shown that the main parameters affecting the process of catalytic oxidation are:concentration of hydrogen sulphide in the air, relative humidity of the purified air, the process time and the content of Fe-EDTA complex in the fibres. The data presented show that the filtering layers with anion exchange package are much more active in the catalytic processes of hydrogen sulphide removal than cation exchanger and inert materials. In the addition to the nature of the fibres relative air humidity is a critical factor determining efficiency of the material in the air purification from H2S. It was proved that the most promising carrier of the Fe-EDTA catalyst for hydrogen sulphide oxidation are Fiban A-6 and Fiban AK-22 fibres.
Abstract: Achievement motivation is believed to promote
giftedness attracting people to invest in many programs to adopt
gifted students providing them with challenging activities.
Intellectual giftedness is founded on the fluid intelligence and
extends to more specific abilities through the growth and inputs from
the achievement motivation. Acknowledging the roles played by the
motivation in the development of giftedness leads to an effective
nurturing of gifted individuals. However, no study has investigated
the direct and indirect effects of the achievement motivation and
fluid intelligence on intellectual giftedness. Thus, this study
investigated the contribution of motivation factors to giftedness
development by conducting tests of fluid intelligence using Cattell
Culture Fair Test (CCFT) and analytical abilities using culture
reduced test items covering problem solving, pattern recognition,
audio-logic, audio-matrices, and artificial language, and self report
questionnaire for the motivational factors. A number of 180 highscoring
students were selected using CCFT from a leading university
in Malaysia. Structural equation modeling was employed using Amos
V.16 to determine the direct and indirect effects of achievement
motivation factors (self confidence, success, perseverance,
competition, autonomy, responsibility, ambition, and locus of
control) on the intellectual giftedness. The findings showed that the
hypothesized model fitted the data, supporting the model postulates
and showed significant and strong direct and indirect effects of the
motivation and fluid intelligence on the intellectual giftedness.
Abstract: Inter-organizational Workflow (IOW) is commonly
used to support the collaboration between heterogeneous and
distributed business processes of different autonomous organizations
in order to achieve a common goal. E-government is considered as an
application field of IOW. The coordination of the different
organizations is the fundamental problem in IOW and remains the
major cause of failure in e-government projects. In this paper, we
introduce a new coordination model for IOW that improves the
collaboration between government administrations and that respects
IOW requirements applied to e-government. For this purpose, we
adopt a Multi-Agent approach, which deals more easily with interorganizational
digital government characteristics: distribution,
heterogeneity and autonomy. Our model integrates also different
technologies to deal with the semantic and technologic
interoperability. Moreover, it conserves the existing systems of
government administrations by offering a distributed coordination
based on interfaces communication. This is especially applied in
developing countries, where administrations are not necessary
equipped with workflow systems. The use of our coordination
techniques allows an easier migration for an e-government solution
and with a lower cost. To illustrate the applicability of the proposed
model, we present a case study of an identity card creation in Tunisia.
Abstract: The UML modeling of complex distributed systems often is a great challenge due to the large amount of parallel real-time operating components. In this paper the problems of verification of such systems are discussed. ECPN, an Extended Colored Petri Net is defined to formally describe state transitions of components and interactions among components. The relationship between sequence diagrams and Free Choice Petri Nets is investigated. Free Choice Petri Net theory helps verifying the liveness of sequence diagrams. By converting sequence diagrams to ECPNs and then comparing behaviors of sequence diagram ECPNs and statecharts, the consistency among models is analyzed. Finally, a verification process for an example model is demonstrated.
Abstract: Large scale systems such as computational Grid is
a distributed computing infrastructure that can provide globally
available network resources. The evolution of information processing
systems in Data Grid is characterized by a strong decentralization of
data in several fields whose objective is to ensure the availability and
the reliability of the data in the reason to provide a fault tolerance
and scalability, which cannot be possible only with the use of the
techniques of replication. Unfortunately the use of these techniques
has a height cost, because it is necessary to maintain consistency
between the distributed data. Nevertheless, to agree to live with
certain imperfections can improve the performance of the system by
improving competition. In this paper, we propose a multi-layer protocol
combining the pessimistic and optimistic approaches conceived
for the data consistency maintenance in large scale systems. Our
approach is based on a hierarchical representation model with tree
layers, whose objective is with double vocation, because it initially
makes it possible to reduce response times compared to completely
pessimistic approach and it the second time to improve the quality
of service compared to an optimistic approach.
Abstract: The purpose of the study is to determine the primary mathematics student teachers- views related to use instructional technology tools in course of the learning process and to reveal how the sample presentations towards different mathematical concepts affect their views. This is a qualitative study involving twelve mathematics students from a public university. The data gathered from two semi-structural interviews. The first one was realized in the beginning of the study. After that the representations prepared by the researchers were showed to the participants. These representations contain animations, Geometer-s Sketchpad activities, video-clips, spreadsheets, and power-point presentations. The last interview was realized at the end of these representations. The data from the interviews and content analyses were transcribed and read and reread to explore the major themes. Findings revealed that the views of the students changed in this process and they believed that the instructional technology tools should be used in their classroom.
Abstract: In this paper, we analyzed the pattern of urban spatial structure of Siheung City that had been divided into two parts and presented alternative plans in order to get rid of these phenomena. Concerning patterns of urban spatial structure, we examined it through means of analyzing status of land use, population density and distribution of residence, status of distribution of main facilities, medical facilities, status of distribution of cultural facilities, distribution of land prices and traffic volume trends. The results of study revealed that status of facilities distribution and distribution of land prices, etc. were bisected by the surrounding area of former municipal office and the district of Sihwa, which were both regarded as one apex of the city divide, forming a duo-centric city. In order to get rid of this problem concerned with urban spatial structure that has been bisected, it is required that measures in order to expand facilities in Siheung City should be taken.
Abstract: This study was conducted to evaluate factors
regulating groundwater quality in an area with agriculture as main
use. Under this study twelve groundwater samples have been
collected from Padra taluka, Dabhoi taluka and Savli taluka of
Vadodara district. Groundwater samples were chemically analyzed
for major physicochemical parameter in order to understand the
different geochemical processes affecting the groundwater quality.
The analytical results shows higher concentration of total dissolved
solids (16.67%), electrical conductivity (25%) and magnesium
(8.33%) for pre monsoon and total dissolved solids (16.67%),
electrical conductivity (33.3%) and magnesium (8.33%) for post
monsoon which indicates signs of deterioration as per WHO and BIS
standards. On the other hand, 50% groundwater sample is unsuitable
for irrigation purposes based on irrigation quality parameters. The
study revealed that application of fertilizer for agricultural
contributing the higher concentration of ions in aquifer of Vadodara
district.
Abstract: Not with standing the importance of foreign highly
skilled professionals for host economies, there is a paucity of
research studies investigating the role of the corporate social context
during the integration process. This research aims to address this
paucity by exploring the role of social capital in the integration of
foreign health professionals. It does so by using a qualitative research
approach. In this pilot study the hospital sector forms this study-s
sample and interviews were conducted with HR managers, foreign
health professionals and external HR consultants. It was found that
most of the participating hospitals had not established specific HR
practices and had only partly linked the development of
organisational social capital with a successful integration process.
This research contributes, for example, to the HR literature on the
integration of self-initiated expatriates by analysing the role of HRM
in generating organisational social capital needed for a successful
integration process.
Abstract: Dual phase steels (DPS)s have a microstructure
consisting of a hard second phase called Martensite in the soft Ferrite
matrix. In recent years, there has been interest in dual-phase steels,
because the application of these materials has made significant usage;
particularly in the automotive sector Composite microstructure of
(DPS)s exhibit interesting characteristic mechanical properties such
as continuous yielding, low yield stress to tensile strength
ratios(YS/UTS), and relatively high formability; which offer
advantages compared with conventional high strength low alloy
steels(HSLAS). The research dealt with the characterization of
damage in (DPS)s. In this study by review the mechanisms of failure
due to volume fraction of martensite second phase; a new method is
introduced to identifying the mechanisms of failure in the various
phases of these types of steels. In this method the acoustic emission
(AE) technique was used to detect damage progression. These failure
mechanisms consist of Ferrite-Martensite interface decohesion and/or
martensite phase fracture. For this aim, dual phase steels with
different volume fraction of martensite second phase has provided by
various heat treatment methods on a low carbon steel (0.1% C), and
then AE monitoring is used during tensile test of these DPSs. From
AE measurements and an energy ratio curve elaborated from the
value of AE energy (it was obtained as the ratio between the strain
energy to the acoustic energy), that allows detecting important
events, corresponding to the sudden drops. These AE signals events
associated with various failure mechanisms are classified for ferrite
and (DPS)s with various amount of Vm and different martensite
morphology. It is found that AE energy increase with increasing Vm.
This increasing of AE energy is because of more contribution of
martensite fracture in the failure of samples with higher Vm. Final
results show a good relationship between the AE signals and the
mechanisms of failure.
Abstract: Injection forging is a Nett-shape manufacturing
process in which one or two punches move axially causing a radial
flow into a die cavity in a form which is prescribed by the exitgeometry,
such as pulley, flanges, gears and splines on a shaft. This
paper presents an experimental and numerical study of the injection
forging of splines in terms of load requirement and material flow.
Three dimensional finite element analyses are used to investigate the
effect of some important parameters in this process. The experiment
has been carried out using solid commercial lead billets with two
different billet diameters and four different dies.
Abstract: Traffic Density provides an indication of the level of
service being provided to the road users. Hence, there is a need to
study the traffic flow characteristics with specific reference to
density in detail. When the length and speed of the vehicles in a
traffic stream vary significantly, the concept of occupancy, rather
than density, is more appropriate to describe traffic concentration.
When the concept of occupancy is applied to heterogeneous traffic
condition, it is necessary to consider the area of the road space and
the area of the vehicles as the bases. Hence, a new concept named,
'area-occupancy' is proposed here. It has been found that the
estimated area-occupancy gives consistent values irrespective of
change in traffic composition.
Abstract: The building sector is the largest energy consumer and
CO2 emitter in the European Union (EU) and therefore the active
reduction of energy consumption and elimination of energy wastage
are among the main goals in it. Healthy housing and energy
efficiency are affected by many factors which set challenges to
monitoring, control and research of indoor air quality (IAQ) and
energy consumption, especially in old buildings. These challenges
include measurement and equipment costs, for example.
Additionally, the measurement results are difficult to interpret and
their usage in the ventilation control is also limited when taking into
account the energy efficiency of housing at the same time. The main
goal of this study is to develop a cost-effective building monitoring
and control system especially for old buildings. The starting point or
keyword of the development process is a wireless system; otherwise
the installation costs become too high. As the main result, this paper
describes an idea of a wireless building monitoring and control
system. The first prototype of the system has been installed in 10
residential buildings and in 10 school buildings located in the City of
Kuopio, Finland.
Abstract: This paper presents a watermarking protocol able to
solve the well-known “customer-s right problem" and “unbinding
problem". In particular, the protocol has been purposely designed
to be adopted in a web context, where users wanting to buy digital
contents are usually neither provided with digital certificates issued
by certification authorities (CAs) nor able to autonomously perform
specific security actions. Furthermore, the protocol enables users to
keep their identities unexposed during web transactions as well as
allows guilty buyers, i.e. who are responsible distributors of illegal
replicas, to be unambiguously identified. Finally, the protocol has
been designed so that web content providers (CPs) can exploit
copyright protection services supplied by web service providers (SPs)
in a security context. Thus, CPs can take advantage of complex
services without having to directly implement them.
Abstract: A methodology to design a nonlinear observer in a
bond graph approach is proposed. The class of nonlinear observer
with multivariable nonlinearities is considered. A junction structure
of the bond graph observer is proposed. The proposed methodology
to an electrical transformer and a DC motor including the nonlinear
saturation is applied. Nonlinear observers for the transformer and DC
motor based on multivariable circle criterion in the physical domain
are proposed. In order to show the saturation effects on the
transformer and DC motor, simulation results are obtained. Finally,
the paper describes that convergence of the estimates to the true
states is achieved.