Abstract: Chemical and physical functionalization of multiwalled
carbon nanotubes (MWCNT) has been commonly practiced to
achieve better dispersion of carbon nanotubes (CNTs) in polymer
matrix. This work describes various functionalization methods (acidtreatment,
non-ionic surfactant treatment with TritonX-100),
fabrication of MWCNT/PP nanocomposites via melt blending and
characterization of mechanical properties. Microscopy analysis
(FESEM, TEM, XPS) showed effective purification of MWCNTs
under acid treatment, and better dispersion under both chemical and
physical functionalization techniques combined, in their respective
order. Tensile tests showed increase in tensile strength for the
nanocomposites that contain MWCNTs up to 2 wt%. A decrease in
tensile strength was seen in samples that contain 4 wt% of MWCNTs
for both raw and Triton X-100 functionalized, signifying MWCNT
degradation/rebundling at composition with higher content of
MWCNTs. For the acid-treated MWCNTs, however, the tensile
results showed slight improvement even at 4wt%, indicating effective
dispersion of MWCNTs.
Abstract: A separation-kernel-based operating system (OS) has been designed for use in secure embedded systems by applying formal methods to the design of the separation-kernel part. The separation kernel is a small OS kernel that provides an abstract distributed environment on a single CPU. The design of the separation kernel was verified using two formal methods, the B method and the Spin model checker. A newly designed semi-formal method, the extended state transition method, was also applied. An OS comprising the separation-kernel part and additional OS services on top of the separation kernel was prototyped on the Intel IA-32 architecture. Developing and testing of a prototype embedded application, a point-of-sale application, on the prototype OS demonstrated that the proposed architecture and the use of formal methods to design its kernel part are effective for achieving a secure embedded system having a high-assurance separation kernel.
Abstract: Three dimensional simulations are carried out to estimate the effect of wind direction, wind speed and geometry on the flow and dispersion of vehicular pollutant in a street canyon. The pollutant sources are motor vehicles passing between the two buildings. Suitable emission factors for petrol and diesel vehicles at varying vehicle speed are used for the estimation of the rate of emission from the streets. The dispersion of automobile pollutant released from the street is simulated by introducing vehicular emission source term as a fixed-flux boundary condition at the ground level over the road. The emission source term is suitably calculated by adopting emission factors from literature for varying conditions of street traffic. It is observed that increase in wind angle disturbs the symmetric pattern of pollution distribution along the street length. The concentration increases in the far end of the street as compared to the near end.
Abstract: Product Lead Time (PLT) is the period of time from
receiving a customer's order to delivering the final product. PLT is an
indicator of the manufacturing controllability, efficiency and
performance. Due to the explosion in the rate of technological
innovations and the rapid changes in the nature of manufacturing
processes, manufacturing firms can bring the new products to market
quicker only if they can reduce their PLT and speed up the rate at
which they can design, plan, control, and manufacture. Although
there is a substantial body of research on manufacturing relating to
cost and quality issues, there is no much specific research conducted
in relation to the formulation of PLT, despite its significance and
importance. This paper analyzes and formulates PLT which can be
used as a guideline for achieving the shorter PLT. Further more this
paper identifies the causes of delay and factors that contributes to the
increased product lead-time.
Abstract: We have developed a distributed asynchronous Web
based training system. In order to improve the scalability and robustness
of this system, all contents and functions are realized on mobile
agents. These agents are distributed to computers, and they can use
a Peer to Peer network that modified Content-Addressable Network.
In the proposed system, only text data can be included in a exercise.
To make our proposed system more useful, the mechanism that it not
only adapts to multimedia data but also it doesn-t influence the user-s
learning even if the size of exercise becomes large is necessary.
Abstract: The nanosized polymeric micelles release the drug
due to acoustic cavitation, which is enhanced in dual frequency
ultrasonic fields. In this study, adult female Balb/C mice were
transplanted with spontaneous breast adenocarcinoma tumors and
were injected with a dose of 1.3 mg/kg doxorubicin in one of three
forms: free doxorubicin, micellar doxorubicin without sonication and
micellar doxorubicin with sonication. To increase cavitation yield,
the tumor region was sonicated with low level dual frequency of 3
MHz and 28 kHz. The animals were sacrificed 24 h after injection,
and their tumor, heart, spleen, liver, kidneys and plasma were
separated and homogenized. The drug content in their tumor, heart,
spleen, liver, kidneys and plasma was determined using tissue
fluorimetry. The results show that in the group that received micellar
doxorubicin with sonication, the drug concentration in the tumor
tissue was nine and three times higher than in the free doxorubicin
group and the micellar doxorubicin without sonication group,
respectively. In the micellar doxorubicin with sonication group, the
drug concentration in other tissues was lower than other groups
(p
Abstract: For fire safety purposes, the fire resistance and the
structural behavior of reinforced concrete members are assessed to
satisfy specific fire performance criteria. The available prescribed
provisions are based on standard fire load. Under various fire
scenarios, engineers are in need of both heat transfer analysis and
structural analysis. For heat transfer analysis, the study proposed a
modified finite difference method to evaluate the temperature profile
within a cross section. The research conducted is limited to concrete
sections exposed to a fire on their one side. The method is based on
the energy conservation principle and a pre-determined power
function of the temperature profile. The power value of 2.7 is found
to be a suitable value for concrete sections. The temperature profiles
of the proposed method are only slightly deviate from those of the
experiment, the FEM and the FDM for various fire loads such as
ASTM E 119, ASTM 1529, BS EN 1991-1-2 and 550 oC. The
proposed method is useful to avoid incontinence of the large matrix
system of the typical finite difference method to solve the
temperature profile. Furthermore, design engineers can simply apply
the proposed method in regular spreadsheet software.
Abstract: The present work analyses different parameters of pressure die casting to minimize the casting defects. Pressure diecasting is usually applied for casting of aluminium alloys. Good surface finish with required tolerances and dimensional accuracy can be achieved by optimization of controllable process parameters such as solidification time, molten temperature, filling time, injection pressure and plunger velocity. Moreover, by selection of optimum process parameters the pressure die casting defects such as porosity, insufficient spread of molten material, flash etc. are also minimized. Therefore, a pressure die casting component, carburetor housing of aluminium alloy (Al2Si2O5) has been considered. The effects of selected process parameters on casting defects and subsequent setting of parameters with the levels have been accomplished by Taguchi-s parameter design approach. The experiments have been performed as per the combination of levels of different process parameters suggested by L18 orthogonal array. Analyses of variance have been performed for mean and signal-to-noise ratio to estimate the percent contribution of different process parameters. Confidence interval has also been estimated for 95% consistency level and three conformational experiments have been performed to validate the optimum level of different parameters. Overall 2.352% reduction in defects has been observed with the help of suggested optimum process parameters.
Abstract: The scale, complexity and worldwide geographical
spread of the LHC computing and data analysis problems are
unprecedented in scientific research. The complexity of processing
and accessing this data is increased substantially by the size and
global span of the major experiments, combined with the limited
wide area network bandwidth available. We present the latest
generation of the MONARC (MOdels of Networked Analysis at
Regional Centers) simulation framework, as a design and modeling
tool for large scale distributed systems applied to HEP experiments.
We present simulation experiments designed to evaluate the
capabilities of the current real-world distributed infrastructure to
support existing physics analysis processes and the means by which
the experiments bands together to meet the technical challenges
posed by the storage, access and computing requirements of LHC
data analysis within the CMS experiment.
Abstract: Not all types of mobile phone are successful in entering the market because some types of the mobile phone have a negative perception of user. Therefore, it is important to understand the influence of mobile phone's characteristics in the local user perception. This research investigates the influence of QWERTY mobile phone's forms in the perception of Indonesian user. First, some alternatives of mobile phone-s form are developed based on a certain number of mobile phone's models. At the second stage, some word pairs as design attributes of the mobile phone are chosen to represent the user perception of mobile phone. At the final stage, a survey is conducted to investigate the influence of the developed form alternatives to the user perception. Based on the research, users perceive mobile phone's form with curved top and straight bottom shapes and mobile phone's form with slider and antenna as the most negative form. Meanwhile, mobile phone's form with curved top and bottom shapes and mobile phone-s form without slider and antenna are perceived by the user as the most positive form.
Abstract: In the past decade, artificial neural networks (ANNs)
have been regarded as an instrument for problem-solving and
decision-making; indeed, they have already done with a substantial
efficiency and effectiveness improvement in industries and businesses.
In this paper, the Back-Propagation neural Networks (BPNs) will be
modulated to demonstrate the performance of the collaborative
forecasting (CF) function of a Collaborative Planning, Forecasting and
Replenishment (CPFR®) system. CPFR functions the balance between
the sufficient product supply and the necessary customer demand in a
Supply and Demand Chain (SDC). Several classical standard BPN will
be grouped, collaborated and exploited for the easy implementation of
the proposed modular ANN framework based on the topology of a
SDC. Each individual BPN is applied as a modular tool to perform the
task of forecasting SKUs (Stock-Keeping Units) levels that are
managed and supervised at a POS (point of sale), a wholesaler, and a
manufacturer in an SDC. The proposed modular BPN-based CF
system will be exemplified and experimentally verified using lots of
datasets of the simulated SDC. The experimental results showed that a
complex CF problem can be divided into a group of simpler
sub-problems based on the single independent trading partners
distributed over SDC, and its SKU forecasting accuracy was satisfied
when the system forecasted values compared to the original simulated
SDC data. The primary task of implementing an autonomous CF
involves the study of supervised ANN learning methodology which
aims at making “knowledgeable" decision for the best SKU sales plan
and stocks management.
Abstract: To minimize power losses, it is important to
determine the location and size of local generators to be placed in
unbalanced power distribution systems. On account of some inherent
features of unbalanced distribution systems, such as radial structure,
large number of nodes, a wide range of X/R ratios, the conventional
techniques developed for the transmission systems generally fail on
the determination of optimum size and location of distributed
generators (DGs). This paper presents a simple method for
investigating the problem of contemporaneously choosing best
location and size of DG in three-phase unbalanced radial distribution
system (URDS) for power loss minimization and to improve the
voltage profile of the system. Best location of the DG is determined
by using voltage index analysis and size of DG is computed by
variational technique algorithm according to available standard size
of DGs. This paper presents the results of simulations for 25-bus and
IEEE 37- bus Unbalanced Radial Distribution system.
Abstract: Academia-industry relationship is not like that of
technology donator-acceptor, but is of interactive and collaborative
nature, acknowledging and ensuring mutual respect for each other-s
role and contributions with an eye to attaining the true purpose of
such relationships, namely, bringing about research-outcome
synergy. Indeed, academia-industry interactions are a system that
requires active and collaborative participations of all the
stakeholders.
This paper examines various issues associated with academic
institutions and industry collaboration with special attention to the
nature of resources and potentialities of stakeholders in the context of
knowledge management. This paper also explores the barriers of
academia-industry interaction. It identifies potential areas where
industry-s participation with academia would be most effective for
synergism. Lastly, this paper proposes an integrated model of several
new collaborative approaches that are possible, mainly in the Indian
scenario to strengthen academia-industry interface.
Abstract: This study is concerned with the investigation of the
suitability of several empirical and semi-empirical drying models
available in the literature to define drying behavior of viscose yarn
bobbins. For this purpose, firstly, experimental drying behaviour of
viscose bobbins was determined on an experimental dryer setup
which was designed and manufactured based on hot-air bobbin
dryers used in textile industry. Afterwards, drying models considered
were fitted to the experimentally obtained moisture ratios. Drying
parameters were drying temperature and bobbin diameter. The fit
was performed by selecting the values for constants in the models in
such a way that these values make the sum of the squared differences
between the experimental and the model results for moisture ratio
minimum. Suitability of fitting was specified as comparing the
correlation coefficient, standard error and mean square deviation.
The results show that the most appropriate model in describing the
drying curves of viscose bobbins is the Page model.
Abstract: Spare parts inventory management is one of the major
areas of inventory research. Analysis of recent literature showed that
an approach integrating spare parts classification, demand
forecasting, and stock control policies is essential; however, adapting
this integrated approach is limited. This work presents an integrated
framework for spare part inventory management and an Excel based
application developed for the implementation of the proposed
framework. A multi-criteria analysis has been used for spare
classification. Forecasting of spare parts- intermittent demand has
been incorporated into the application using three different
forecasting models; namely, normal distribution, exponential
smoothing, and Croston method. The application is also capable of
running with different inventory control policies. To illustrate the
performance of the proposed framework and the developed
application; the framework is applied to different items at a service
organization. The results achieved are presented and possible areas
for future work are highlighted.
Abstract: A new, rapidly convergent, numerical procedure for
internal loading distribution computation in statically loaded, singlerow,
angular-contact ball bearings, subjected to a known combined
radial and thrust load, which must be applied so that to avoid tilting
between inner and outer rings, is used to find the load distribution
differences between a loaded unfitted bearing at room temperature,
and the same loaded bearing with interference fits that might
experience radial temperature gradients between inner and outer
rings. For each step of the procedure it is required the iterative
solution of Z + 2 simultaneous nonlinear equations – where Z is the
number of the balls – to yield exact solution for axial and radial
deflections, and contact angles.
Abstract: Current OCR technology does not allow to
accurately recognizing small text images, such as those found
in web images. Our goal is to investigate new approaches to
recognize very low resolution text images containing antialiased
character shapes.
This paper presents a preliminary study on the variability of
such characters and the feasibility to discriminate them by
using geometrical features. In a first stage we analyze the
distribution of these features. In a second stage we present a
study on the discriminative power for recognizing isolated
characters, using various rendering methods and font
properties. Finally we present interesting results of our
evaluation tests leading to our conclusion and future focus.
Abstract: Describes the current situation of educational Robotics
"the State of the art" its concept, its evolution their niches of
opportunity, academic and business and the importance of education
and academic outreach. It shows that the development of high-tech
automated educational materials influence the teaching-learning
process and that communication between machines and humans is a
reality.
Abstract: Dengue fever is prevalent in Malaysia with numerous
cases including mortality recorded over the years. Public education
on the prevention of the desease through various means has been
carried out besides the enforcement of legal means to eradicate
Aedes mosquitoes, the dengue vector breeding ground. Hence, other
means need to be explored, such as predicting the seasonal peak
period of the dengue outbreak and identifying related climate factors
contributing to the increase in the number of mosquitoes. Simulation
model can be employed for this purpose. In this study, we created a
simulation of system dynamic to predict the spread of dengue
outbreak in Hulu Langat, Selangor Malaysia. The prototype was
developed using STELLA 9.1.2 software. The main data input are
rainfall, temperature and denggue cases. Data analysis from the graph
showed that denggue cases can be predicted accurately using these
two main variables- rainfall and temperature. However, the model
will be further tested over a longer time period to ensure its
accuracy, reliability and efficiency as a prediction tool for dengue
outbreak.
Abstract: In this study, the Multi-Layer Perceptron (MLP)with Back-Propagation learning algorithm are used to classify to effective diagnosis Parkinsons disease(PD).It-s a challenging problem for medical community.Typically characterized by tremor, PD occurs due to the loss of dopamine in the brains thalamic region that results in involuntary or oscillatory movement in the body. A feature selection algorithm along with biomedical test values to diagnose Parkinson disease.Clinical diagnosis is done mostly by doctor-s expertise and experience.But still cases are reported of wrong diagnosis and treatment. Patients are asked to take number of tests for diagnosis.In many cases,not all the tests contribute towards effective diagnosis of a disease.Our work is to classify the presence of Parkinson disease with reduced number of attributes.Original,22 attributes are involved in classify.We use Information Gain to determine the attributes which reduced the number of attributes which is need to be taken from patients.The Artificial neural networks is used to classify the diagnosis of patients.Twenty-Two attributes are reduced to sixteen attributes.The accuracy is in training data set is 82.051% and in the validation data set is 83.333%.