Abstract: A Smart Building Controller (SBC) is a server
software that offers secured access to a pool of building specific
resources, executes monitoring tasks and performs automatic
administration of a building, thus optimizing the exploitation cost and
maximizing comfort. This paper brings to discussion the issues that
arise with the secure exploitation of the SBC administered resources
and proposes a technical solution to implement a robust secure access
system based on roles, individual rights and privileges (special
rights).
Abstract: There is a trend in development discourse to
understand and explain the level of corruption in Nigeria, its anticorruption
crusade and why it is failing, as well as its level of
compliance with International standards of United Nations
Convention against Corruption (UNCAC) & African Union
Convention on Converting and Preventing Corruption) to which
Nigeria is a signatory. This paper discusses the legal and
Constitutional provisions relating to corrupt practices and safeguards
in Nigeria, as well as the obstacles to the implementation of these
Conventions.
The paper highlights the challenges posed to the Anti-Corruption
crusade by analysing the loopholes that exist both in administrative
structure and in scope of the relevant laws. The paper argues that
Nigerian Constitution did not make adequate provisions for the
implementation of the conventions, hence a proposal which will
ensure adequate provision for implementing the conventions to better
the lives of Nigerians. The paper concludes that there is the need to
build institutional parameters, adequate constitutional and structural
safeguards, as well as to synergise strategies, collaborations and
alliances to facilitate the timely domestication and implementation of
the conventions.
Abstract: The paper presents a thermodynamic cycle analysis
for three turboshaft engines. The first cycle is a Brayton cycle,
describing the evolution of a classical turboshaft, based on the
Klimov TV2 engine. The other four cycles aim at approaching an
Ericsson cycle, by replacing the Brayton cycle adiabatic expansion in
the turbine by quasi-isothermal expansion. The maximum quasi-
Ericsson cycles temperature is set to a lower value than the maximum
Brayton cycle temperature, equal to the Brayton cycle power turbine
inlet temperature, in order to decrease the engine NOx emissions.
Also, the power/expansion ratio distribution over the stages of the gas
generator turbine is maintained the same. In two of the considered
quasi-Ericsson cycles, the efficiencies of the gas generator turbine, as
well as the power/expansion ratio distribution over the stages of the
gas generator turbine are maintained the same as for the reference
case, while for the other two cases, the efficiencies are increased in
order to obtain the same shaft power as in the reference case. For the
two cases respecting the first condition, both the shaft power and the
thermodynamic efficiency of the engine decrease, while for the other
two, the power and efficiency are maintained, as a result of assuming
new, more efficient gas generator turbines.
Abstract: In this paper, we discuss the performance of applying
hybrid spiral dynamic bacterial chemotaxis (HSDBC) optimisation
algorithm on an intelligent controller for a differential drive robot. A
unicycle class of differential drive robot is utilised to serve as a basis
application to evaluate the performance of the HSDBC algorithm. A
hybrid fuzzy logic controller is developed and implemented for the
unicycle robot to follow a predefined trajectory. Trajectories of
various frictional profiles and levels were simulated to evaluate the
performance of the robot at different operating conditions. Controller
gains and scaling factors were optimised using HSDBC and the
performance is evaluated in comparison to previously adopted
optimisation algorithms. The HSDBC has proven its feasibility in
achieving a faster convergence toward the optimal gains and resulted
in a superior performance.
Abstract: The objectives of the study were to determine the
marketing mix factors that influencing tourist’s destination decision
making for cultural tourism in the Chonburi province. Both
quantitative and qualitative data were applied in this study. The
samples of 400 cases for quantitative analysis were tourists (both
Thai and foreign) who were interested in cultural tourism in the
Chonburi province, and traveled to cultural sites in Chonburi and 14
representatives from provincial tourism committee of Chonburi and
local tourism experts. Statistics utilized in this research included
frequency, percentage, mean, standard deviation, and multiple
regression analysis. The study found that Thai and foreign tourists
are influenced by different important marketing mix factors. The
important factors for Thai respondents were physical evidence, price,
people, and place at high importance level. For foreign respondents,
physical evidence, price, people, and process were high importance
level, whereas, product, place and promotion were moderate
importance level.
Abstract: In review the generalized data about biosynthetic routs
formation anthraquinone molecules in natural cells. The basic
possibilities of various ways of biosynthesis of different quinoid
substances are shown.
Abstract: The Algeria by its location offers a rich and diverse
vegetation. A large number of aromatic and medicinal plants grow
spontaneously. The interest in these plants has continued to grow in
recent years. Their particular properties due to the essential oil
fraction can be utilized to treat microbial infections. To this end, and
in the context of the valuation of the Algerian flora, we became
interested in the species of the family Lamiaceae which is one of the
most used as a global source of spices. The plant on which we have
based our choice is a species of sage "Salvia officinalis" from the
Isser localized region within the province of Boumerdes. This work
focuses on the study of the antimicrobial activity of essential oil
extracted from the leaves of Salvia officinalis. The extraction is
carried out by essential oil hydrodistillation and reveals a yield of
1.06℅. The study of the antimicrobial activity of the essential oil by
the method of at aromatogramme shown that Gram positive bacteria
are most susceptible (Staphylococcus aureus and Bacillus subtilis)
with a strong inhibition of growth. The yeast Candida albicans
fungus Aspergillus niger and have shown moderately sensitive.
Abstract: Innovation plays an important role in economic
growth and development. Evolutionary economics has entrepreneurs
at the centre of the innovation system, but includes all other
participants as contributors to the performance of the innovation
system. Education and training institutions, one of the participants in
the innovation system, contributes in different ways to human capital.
The gap in literature on the competence building as part of human
capital in the analysis of innovation systems is addressed in this
paper. The Mpumalanga Province of South Africa is used as a case
study. It was found that the absence of a university, the level of
education, the quality and performance in the education sector and
the condition of the education infrastructure have not been conducive
to learning.
Abstract: The heavy metal pollution degree in the soils around
the Zangezur copper and molybdenum combine in Syunik Marz,
Armenia was assessed. The results of the study showed that heavy
metal pollution degree in the soils mainly decreased with increasing
distance from the open mine and the ore enrichment combine which
indicated that the open mine and the ore enrichment combine were
the main sources of heavy metal pollution. The only exception was
observed in the northern part of the open mine where pollution
degree in the sites (along the open mine) situated 600 meters far from
the mine was higher than that in the sites located 300 meters far from
the mine. This can be explained by the characteristics of relief and air
currents as well as the weak vegetation cover of these sites and the
characteristics of soil structure. According to geo-accumulation index
(I-geo), contamination factor (Cf), contamination degree (Cd) and
pollution load index (PLI) values, the pollution degree in the soils
around the open mine and the ore enrichment combine was higher
than that in the soils around the tailing dumps which was due to the
proper and accurate operation of the Artsvanik tailing damp and the
recultivation of the Voghji tailing dump.
The high Cu and Mo pollution of the soils was conditioned by the
character of industrial activities, the moving direction of air currents
as well as the physicochemical peculiarities of the soils.
Abstract: Two finite element (FEM) models are presented in
this paper to address the random nature of the response of glued
timber structures made of wood segments with variable elastic
moduli evaluated from 3600 indentation measurements. This total
database served to create the same number of ensembles as was the
number of segments in the tested beam. Statistics of these ensembles
were then assigned to given segments of beams and the Latin
Hypercube Sampling (LHS) method was called to perform 100
simulations resulting into the ensemble of 100 deflections subjected
to statistical evaluation. Here, a detailed geometrical arrangement of
individual segments in the laminated beam was considered in the
construction of two-dimensional FEM model subjected to in fourpoint
bending to comply with the laboratory tests. Since laboratory
measurements of local elastic moduli may in general suffer from a
significant experimental error, it appears advantageous to exploit the
full scale measurements of timber beams, i.e. deflections, to improve
their prior distributions with the help of the Bayesian statistical
method. This, however, requires an efficient computational model
when simulating the laboratory tests numerically. To this end, a
simplified model based on Mindlin’s beam theory was established.
The improved posterior distributions show that the most significant
change of the Young’s modulus distribution takes place in laminae in
the most strained zones, i.e. in the top and bottom layers within the
beam center region. Posterior distributions of moduli of elasticity
were subsequently utilized in the 2D FEM model and compared with
the original simulations.
Abstract: This paper introduces a proposal scheme for an
Intelligent System applied to Pedagogical Advising using Case-Based
Reasoning, to find consolidated solutions before used for the new
problems, making easier the task of advising students to the
pedagogical staff. We do intend, through this work, introduce the
motivation behind the choices for this system structure, justifying the
development of an incremental and smart web system who learns
bests solutions for new cases when it’s used, showing technics and
technology.
Abstract: The thermal control in many systems is widely
accomplished applying mixed convection process due to its low cost,
reliability and easy maintenance. Typical applications include the
aircraft electronic equipment, rotating-disc heat exchangers, turbo
machinery, and nuclear reactors, etc. Natural convection in an inclined
square enclosure heated via wall heater has been studied numerically.
Finite volume method is used for solving momentum and energy
equations in the form of stream function–vorticity. The right and left
walls are kept at a constant temperature, while the other parts are
adiabatic. The range of the inclination angle covers a whole revolution.
The method is validated for a vertical cavity. A general power law
dependence of the Nusselt number with respect to the Rayleigh
number with the coefficient and exponent as functions of the
inclination angle is presented. For a fixed Rayleigh number, the
inclination angle increases or decreases is found.
Abstract: Catalytic combustion of methane is imperative due to
stability of methane at low temperature. Methane (CH4), therefore,
remains unconverted in vehicle exhausts thereby causing greenhouse
gas GHG emission problem. In this study, heterogeneous catalysts of
palladium with bio-char (2 wt% Pd/Bc) and Al2O3 (2wt% Pd/ Al2O3)
supports were prepared by incipient wetness impregnation and then
subsequently tested for catalytic combustion of CH4. Support-porous
heterogeneous catalytic combustion (HCC) material were selected
based on factors such as surface area, porosity, thermal stability,
thermal conductivity, reactivity with reactants or products, chemical
stability, catalytic activity, and catalyst life. Sustainable and
renewable support-material of bio-mass char derived from palm shell
waste material was compared with those from the conventional
support-porous materials. Kinetic rate of reaction was determined for
combustion of methane on Palladium (Pd) based catalyst with Al2O3
support and bio-char (Bc). Material characterization was done using
TGA, SEM, and BET surface area. The performance test was
accomplished using tubular quartz reactor with gas mixture ratio of
3% methane and 97% air. The methane porous-HCC conversion was
carried out using online gas analyzer connected to the reactor that
performed porous-HCC. BET surface area for prepared 2 wt% Pd/Bc
is smaller than prepared 2wt% Pd/ Al2O3 due to its low porosity
between particles. The order of catalyst activity based on kinetic rate
on reaction of catalysts in low temperature was 2wt%
Pd/Bc>calcined 2wt% Pd/ Al2O3> 2wt% Pd/ Al2O3>calcined 2wt%
Pd/Bc. Hence agro waste material can successfully be utilized as an
inexpensive catalyst support material for enhanced CH4 catalytic
combustion.
Abstract: Adolescents with Autism Spectrum Disorders (ASD)
often experience social-communication difficulties that negatively
impact their social interactions with typical peers. However, unlike
other age and disability groups, there is little intervention research to
inform best practice for these students. One evidence-based strategy
for younger students with ASD is peer-mediated intervention (PMI).
PMI may be particularly promising for use with adolescents, as peers
are readily available and are natural experts for encouraging authentic
high school conversations. This paper provides a review of previous
research that evaluated the use of PMI to improve the socialcommunication
skills of students with ASD. Specific intervention
features associated with positive student outcomes are identified and
recommendations for future research are provided. Adolescents with
ASD are targeted due the critical importance of social conversation at
the high school level.
Abstract: Modern Portfolio Theory (MPT) according to
Markowitz states that investors form mean-variance efficient
portfolios which maximizes their utility. Markowitz proposed the
standard deviation as a simple measure for portfolio risk and the
lower semi-variance as the only risk measure of interest to rational
investors. This paper uses a third volatility estimator based on
intraday data and compares three efficient frontiers on the Croatian
Stock Market. The results show that range-based volatility estimator
outperforms both mean-variance and lower semi-variance model.
Abstract: In this work, we attempt to analyze the contribution of
innovative activities to firm performance and growth. We examine
economic data from some of the economies that were heavily
affected by current economic crisis: the countries of southern Europe
(Portugal, Italy, Greece and Spain) and Ireland. Following literature,
an appropriate econometric model is developed and several indicators
are tested in order to disclose possible relation with innovative
activity. Findings confirm the crucial effect of innovative process in
economic activity, in firm and country level.
Abstract: Array-based gene expression analysis is a powerful
tool to profile expression of genes and to generate information on
therapeutic effects of new anti-cancer compounds. Anti-apoptotic
effect of thymoquinone was studied in MCF7 breast cancer cell line
using gene expression profiling with cDNA microarray. The purity
and yield of RNA samples were determined using RNeasyPlus Mini
kit. The Agilent RNA 6000 NanoLabChip kit evaluated the quantity
of the RNA samples. AffinityScript RT oligo-dT promoter primer
was used to generate cDNA strands. T7 RNA polymerase was used to
convert cDNA to cRNA. The cRNA samples and human universal
reference RNA were labelled with Cy-3-CTP and Cy-5-CTP,
respectively. Feature Extraction and GeneSpring softwares analysed
the data. The single experiment analysis revealed involvement of 64
pathways with up-regulated genes and 78 pathways with downregulated
genes. The MAPK and p38-MAPK pathways were
inhibited due to the up-regulation of PTPRR gene. The inhibition of
p38-MAPK suggested up-regulation of TGF-ß pathway. Inhibition of
p38-MAPK caused up-regulation of TP53 and down-regulation of
Bcl2 genes indicating involvement of intrinsic apoptotic pathway.
Down-regulation of CARD16 gene as an adaptor molecule regulated
CASP1 and suggested necrosis-like programmed cell death and
involvement of caspase in apoptosis. Furthermore, down-regulation
of GPCR, EGF-EGFR signalling pathways suggested reduction of
ER. Involvement of AhR pathway which control cytochrome P450
and glucuronidation pathways showed metabolism of Thymoquinone.
The findings showed differential expression of several genes in
apoptosis pathways with thymoquinone treatment in estrogen
receptor-positive breast cancer cells.
Abstract: In its efforts to utilize the information and
communication technology to enhance the quality of public service
delivery, national and local governments around the world are
competing to introduce more ICT applications as tools to automate
processes related to law enforcement or policy execution, increase
citizen orientation, trust, and satisfaction, and create one-stop-shops
for public services. In its implementation, e-Government ICTs need
to maintain transparency, participation, and collaboration. Due to this
diverse of mixed goals and requirements, e-Government systems
need to be designed based on special design considerations in order
to eliminate the risks of failure to compliance to government
regulations, citizen dissatisfaction, or market repulsion.
In this article we suggest a framework with guidelines for
designing government information systems that takes into
consideration the special requirements of the public sector. Then we
introduce two case studies and show how applying those guidelines
would result in a more solid system design.
Abstract: Solid waste management in steel industry is broadly
classified in “4 Rs” i.e. reduce, reuse, recycle and restore the
materials. Reuse and recycling the entire solid waste generated in the
process of steel making is a viable solution in targeting a clean, green
and zero waste technology leading to sustainable development of the
steel industry. Solid waste management has gained importance in
steel industry in view of its uncertainty, volatility and speculation due
to world competitive standards, rising input costs, scarcity of raw
materials and solid waste generated like in other sectors. The
challenges that the steel Industry faces today are the requirement of a
sustainable development by meeting the needs of our present
generation without compromising the ability of future generations.
Technologies are developed not only for gainful utilization of solid
wastes in manufacture of conventional products but also for
conversion of same in to completely new products.
Abstract: Hybrid bioreactor having both suspended-growth and
attached-growth bacteria is found a novel and excellent bioreactor
system for treating the municipal wastewater containing inhibitory
substrates too. In this reactor a fraction of substrate is used by
suspended biomass and the remaining by attached biomass resulting
in the competition between the two growths for the substrate. The
combination of suspended and attached growth provides the system
with enhanced biomass concentration and sludge age more than those
in ASP. Similar to attached growth system, the hybrid bioreactor
ensures considerable efficiency for treating toxic and refractory
substances in wastewater. For the process design of hybrid bioreactor
a suitable mathematical model is required. Although various
mathematical models were developed on hybrid bioreactor in due
course of time in earlier research works, none of them was found
having a specific simplified solution of the corresponding models and
without having any drawback. To overcome this drawback authors
already developed a simplified mathematical model for process
design of a hybrid bioreactor. The present paper briefly highlights on
the various aspects of process design of an aerobic hybrid bioreactor
for the treatment of municipal wastewater.