Abstract: In this longitudinal study, we examined the moderating role of personality in the relationship between communication behaviors and long-term dyadic adjustment. A sample of 82 couples completed the NEO Five-Factor Inventory and the Dyadic Adjustment Scale. These couples were also videotaped during a 15-minute problem-solving discussion. Approximately 2.5 years later, these couples completed again the Dyadic Adjustment Scale. Results show that personality of both men and women moderates the relationship between communication behaviors of the partner and long-term dyadic adjustment of the individual. Women-s openness and men-s extraversion moderate the relationship between some communication behaviors and long-term dyadic adjustment
Abstract: The main objective of this study was to remove and recover Ni, Cu and Fe from a mixed metal system using sodium hypophosphite as a reducing agent and nickel powder as seeding material. The metal systems studied consisted of Ni-Cu, Ni-Fe and Ni-Cu-Fe solutions. A 5 L batch reactor was used to conduct experiments where 100 mg/l of each respective metal was used. It was found that the metals were reduced to their elemental form with removal efficiencies of over 80%. The removal efficiency decreased in the order Fe>Ni>Cu. The metal powder obtained contained between 97-99% Ni and was almost spherical and porous. Size enlargement by aggregation was the dominant particulate process.
Abstract: Tool wear and surface roughness prediction plays a
significant role in machining industry for proper planning and control
of machining parameters and optimization of cutting conditions. This
paper deals with developing an artificial neural network (ANN)
model as a function of cutting parameters in turning steel under
minimum quantity lubrication (MQL). A feed-forward
backpropagation network with twenty five hidden neurons has been
selected as the optimum network. The co-efficient of determination
(R2) between model predictions and experimental values are 0.9915,
0.9906, 0.9761 and 0.9627 in terms of VB, VM, VS and Ra
respectively. The results imply that the model can be used easily to
forecast tool wear and surface roughness in response to cutting
parameters.
Abstract: With the development of technology, the growing
trend of fast and safe passenger transport, air pollution, traffic
congestion, increase in problems such as the increasing population
and the high cost of private vehicle usage made many cities around
the world with a population of more or less, start to build rail systems
as a means of urban transport in order to ensure the economic and
environmental sustainability and more efficient use of land in the
city. The implementation phase of rail systems costs much more than
other public transport systems. However, social and economic returns
in the long term made these systems the most popular investment tool
for planned and developing cities.
In our country, the purpose, goals and policies of transportation
plans are away from integrity, and the problems are not clearly
detected. Also, not defined and incomplete assessment of
transportation systems and insufficient financial analysis are the most
important cause of failure. Rail systems and other transportation
systems to be addressed as a whole is seen as the main factor in
increasing efficiency in applications that are not integrated yet in our
country to come to this point has led to the problem.
Abstract: Methanol-to-olefins coupled with transformation of
coal or natural gas to methanol gives an interesting and promising way
to produce ethylene and propylene. To investigate solid concentration
in gas-solid fluidized bed for methanol-to-olefins process catalyzed by
SAPO-34, a cold model experiment system is established in this paper.
The system comprises a gas distributor in a 300mm internal diameter
and 5000mm height acrylic column, the fiber optic probe system and
series of cyclones. The experiments are carried out at ambient
conditions and under different superficial gas velocity ranging from
0.3930m/s to 0.7860m/s and different initial bed height ranging from
600mm to 1200mm. The effects of radial distance, axial distance,
superficial gas velocity, initial bed height on solid concentration in the
bed are discussed. The effects of distributor shape and porosity on
solid concentration are also discussed. The time-averaged solid
concentration profiles under different conditions are obtained.
Abstract: Scheduling algorithms are used in operating systems
to optimize the usage of processors. One of the most efficient
algorithms for scheduling is Multi-Layer Feedback Queue (MLFQ)
algorithm which uses several queues with different quanta. The most
important weakness of this method is the inability to define the
optimized the number of the queues and quantum of each queue. This
weakness has been improved in IMLFQ scheduling algorithm.
Number of the queues and quantum of each queue affect the response
time directly. In this paper, we review the IMLFQ algorithm for
solving these problems and minimizing the response time. In this
algorithm Recurrent Neural Network has been utilized to find both
the number of queues and the optimized quantum of each queue.
Also in order to prevent any probable faults in processes' response
time computation, a new fault tolerant approach has been presented.
In this approach we use combinational software redundancy to
prevent the any probable faults. The experimental results show that
using the IMLFQ algorithm results in better response time in
comparison with other scheduling algorithms also by using fault
tolerant mechanism we improve IMLFQ performance.
Abstract: The purpose of our study was to compare spontaneous
re-epithelisation characteristics versus assisted re-epithelisation. In
order to assess re-epithelisation of the injured skin, we have imagined
and designed a burn wound model on Wistar rat skin. Our aim was to
create standardised, easy reproducible and quantifiable skin lesions
involving entire epidermis and superficial dermis. We then have
applied the above mentioned therapeutic strategies to compare
regeneration of epidermis and dermis, local and systemic parameter
changes in different conditions. We have enhanced the reepithelisation
process under a moist atmosphere of a polyurethane
wound dress modified with helium non-thermal plasma, and with the
aid of direct cold-plasma treatment respectively. We have followed
systemic parameters change: hematologic and biochemical
parameters, and local features: oxidative stress markers and histology
of skin in the above mentioned conditions. Re-epithelisation is just a
part of the skin regeneration process, which recruits cellular
components, with the aid of epidermal and dermal interaction via
signal molecules.
Abstract: This paper presents a novel template-based method to
detect objects of interest from real images by shape matching. To
locate a target object that has a similar shape to a given template
boundary, the proposed method integrates three components: contour
grouping, partial shape matching, and boundary verification. In the
first component, low-level image features, including edges and
corners, are grouped into a set of perceptually salient closed contours
using an extended ratio-contour algorithm. In the second component,
we develop a partial shape matching algorithm to identify the
fractions of detected contours that partly match given template
boundaries. Specifically, we represent template boundaries and
detected contours using landmarks, and apply a greedy algorithm to
search the matched landmark subsequences. For each matched
fraction between a template and a detected contour, we estimate an
affine transform that transforms the whole template into a hypothetic
boundary. In the third component, we provide an efficient algorithm
based on oriented edge lists to determine the target boundary from
the hypothetic boundaries by checking each of them against image
edges. We evaluate the proposed method on recognizing and
localizing 12 template leaves in a data set of real images with clutter
back-grounds, illumination variations, occlusions, and image noises.
The experiments demonstrate the high performance of our proposed
method1.
Abstract: The objective of this study is to examine the validity of Wagner-s law and relationship between economic growth, population and export for Pakistan. The ARDL Bounds cointegration and ECM are utilized for long and short run equilibrium for the period of 1972-2007. Population has considerable role in an economy and exports are the main source to raise the GDP. With the increase in GDP, the government expenditures may or may not increase. The empirical results indicate that the Wagner-s Law does hold, as economic growth is significantly and positively correlated with government expenditures. However, population and exports have also significant and positive impact on government expenditures both in short and long run. The significant and negative coefficient of error correction term in ECM indicates that after a shock, the long rum equilibrium will again converge towards equilibrium about 70.82 percent within a year.
Abstract: Since the 1990s the American furniture industry faces
a transition period. Manufacturers, one of its most important actors
made its entrance into the retail industry. This shift has had deep
consequences not only for the American furniture industry as a
whole, but also for other international furniture industries, especially
the Chinese. The present work aims to analyze this actor based on the
distinction provided by the Global Commodity Chain Theory. It
stresses its characteristics, structure, operational way and importance
for both the U.S. and the Chinese furniture industries.
Abstract: There are many issues that affect modeling and designing real-time databases. One of those issues is maintaining consistency between the actual state of the real-time object of the external environment and its images as reflected by all its replicas distributed over multiple nodes. The need to improve the scalability is another important issue. In this paper, we present a general framework to design a replicated real-time database for small to medium scale systems and maintain all timing constrains. In order to extend the idea for modeling a large scale database, we present a general outline that consider improving the scalability by using an existing static segmentation algorithm applied on the whole database, with the intent to lower the degree of replication, enables segments to have individual degrees of replication with the purpose of avoiding excessive resource usage, which all together contribute in solving the scalability problem for DRTDBS.
Abstract: Emerging adulthood, between the ages of 18 and 25, as a new developmental stage extending from adolescence to young adulthood. According to Arnett [2004], there are experiments related to identity in three basic fields which are love, work and view of the world in emerging adulthood. When the literature related to identity is examined, it is seen that identity has been studied more with adolescent, and studies were concentrated on the relationship of identity with many demographic variables neglecting important variables such as marital status, parental status and SES. Thus, the main aim of this study is to determine whether identity statuses differenciate with marital status, parental status and SES. A total of 700 emerging adults participated in this study, and the mean age was 22,45 years [SD = 3.76]. The sample was made up of 347 female and 353 male. All participants in the study were students from colleges. Student responses to the Extended Version of the Objective Measure of Ego Identity Status [EOM-EIS-2] used to classify students into one of the four identity statuses. SPSS 15.00 program wasa used to analyse data. Percentage, frequency and X2 analysis were used in the analysis of data. When the findings of the study is viewed as a whole, the most frequently observed identity status in the group is found to be moratorium. Also, identity statuses differenciate with marital status, parental status and SES. Findings were discussed in the context of emerging adulthood.
Abstract: The full length mitochondrial small subunit ribosomal
(mt-rns) gene has been characterized for Ophiostoma novo-ulmi
subspecies americana. The gene was also characterized for
Ophiostoma ulmi and a group II intron was noted in the mt-rns gene
of O. ulmi. The insertion in the mt-rns gene is at position S952 and it
is a group IIB1 intron that encodes a double motif LAGLIDADG
homing endonuclease from an open reading frame located within a
loop of domain III. Secondary structure models for the mt-rns RNA
of O. novo-ulmi subsp. americana and O. ulmi were generated to
place the intron within the context of the ribosomal RNA. The in vivo
splicing of the O.ul-mS952 group II intron was confirmed with
reverse transcription-PCR. A survey of 182 strains of Dutch Elm
Diseases causing agents showed that the mS952 intron was absent in
what is considered to be the more aggressive species O. novo-ulmi
but present in strains of the less aggressive O. ulmi. This observation
suggests that the O.ul-mS952 intron can be used as a PCR-based
molecular marker to discriminate between O. ulmi and O. novo-ulmi
subsp. americana.
Abstract: Road rage is an increasingly prevalent expression of
aggression in our society. Its dangers are apparent and understanding
its causes may shed light on preventative measures. This study
involved a fifteen-minute survey administered to 147 undergraduate
students at a North Eastern suburban university. The survey
consisted of a demographics section, questions regarding financial
investment in respondents- vehicles, experience driving, habits of
driving, experiences witnessing role models driving, and an
evaluation of road rage behavior using the Driving Vengeance
Questionnaire. The study found no significant differences in driving
aggression between respondents who were financially invested in
their vehicle compared to those who were not, or between
respondents who drove in heavy traffic hours compared to those who
did not, suggesting internal factors correlate with aggressive driving
habits. The study also found significant differences in driving
aggression between males versus females, those with more points on
their license versus fewer points, and those who witnessed parents
driving aggressively very often versus rarely or never. Additional
studies can investigate how witnessing parents driving aggressively
is related to future driving behaviors.
Abstract: A new chelating resin is prepared by coupling
Amberlite XAD-4 with 1-amino-2-naphthole through an azo spacer.
The resulting sorbent has been characterized by FT-IR, elemental
analysis and thermogravimetric analysis (TGA) and studied for
preconcentrating of Cu (II) using flame atomic absorption
spectrometry (FAAS) for metal monitoring. The optimum pH value
for sorption of the copper ions was 6.5. The resin was subjected to
evaluation through batch binding of mentioned metal ion.
Quantitative desorption occurs instantaneously with 0.5 M HNO3.
The sorption capacity was found 4.8 mmol.g-1 of resin for Cu (II) in
the aqueous solution. The chelating resin can be reused for 10 cycles
of sorption-desorption without any significant change in sorption
capacity. A recovery of 99% was obtained the metal ions with 0.5 M
HNO3 as eluting agent. The method was applied for metal ions
determination from industrial waste water sample.
Abstract: The recent development of Information and Communication Technology (ICT) enables new ways of "democratic" decision-making such as a page-ranking system, which estimates the importance of a web page based on indirect trust on that page shared by diverse group of unorganized individuals. These kinds of "democracy" have not been acclaimed yet in the world of real politics. On the other hand, a large amount of data about personal relations including trust, norms of reciprocity, and networks of civic engagement has been accumulated in a computer-readable form by computer systems (e.g., social networking systems). We can use these relations as a new type of social capital to construct a new democratic decision-making system based on a delegation network. In this paper, we propose an effective decision-making support system, which is based on empowering someone's vote whom you trust. For this purpose, we propose two new techniques: the first is for estimating entire vote distribution from a small number of votes, and the second is for estimating active voter choice to promote voting using a delegation network. We show that these techniques could increase the voting ratio and credibility of the whole decision by agent-based simulations.
Abstract: Increasing concerns over climate change have limited
the liberal usage of available energy technology options. India faces
a formidable challenge to meet its energy needs and provide adequate
energy of desired quality in various forms to users in sustainable
manner at reasonable costs. In this paper, work carried out with an
objective to study the role of various energy technology options
under different scenarios namely base line scenario, high nuclear
scenario, high renewable scenario, low growth and high growth rate
scenario. The study has been carried out using Model for Energy
Supply Strategy Alternatives and their General Environmental
Impacts (MESSAGE) model which evaluates the alternative energy
supply strategies with user defined constraints on fuel availability,
environmental regulations etc. The projected electricity demand, at
the end of study period i.e. 2035 is 500490 MWYr. The model
predicted the share of the demand by Thermal: 428170 MWYr,
Hydro: 40320 MWYr, Nuclear: 14000 MWYr, Wind: 18000 MWYr
in the base line scenario. Coal remains the dominant fuel for
production of electricity during the study period. However, the
import dependency of coal increased during the study period. In
baseline scenario the cumulative carbon dioxide emissions upto 2035
are about 11,000 million tones of CO2. In the scenario of high nuclear
capacity the carbon dioxide emissions reduced by 10 % when nuclear
energy share increased to 9 % compared to 3 % in baseline scenario.
Similarly aggressive use of renewables reduces 4 % of carbon
dioxide emissions.
Abstract: Since 2005, an SRF module of CESR type serves as the
accelerating cavity at the Taiwan Light Source in the National
Synchrotron Radiation Research Center. A 500-MHz niobium cavity
is immersed in liquid helium inside this SRF module. To reduce heat
load, the liquid helium vessel is thermally shielded by
liquid-nitrogen-cooled copper layer, and the beam chambers are also
anchored with pipes of the liquid nitrogen flow in middle of the liquid
helium vessel and the vacuum vessel. A strong correlation of the
movement of the cavity-s frequency tuner with the temperature
variation of parts cooled with liquid nitrogen was observed. A
previous study on a spare SRF module with the niobium cavity cooled
by liquid nitrogen instead of liquid helium, satisfactory suppression of
the thermal oscillation was achieved by attaching a temporary buffer
tank for the vented shielding nitrogen flow from the SRF module. In
this study, a home-made buffer tank is designed and integrated to the
spare SRF module with cavity cooled by liquid helium. Design,
construction, integration, and preliminary test results of this buffer
tank are presented.
Abstract: Analyses carried out on examples of detected defects
echoes showed clearly that one can describe these detected forms according to a whole of characteristic parameters in order to be able to make discrimination between a planar defect and a volumic defect.
This work answers to a problem of ultrasonics NDT like Identification of the defects. The problems as well as the objective of
this realized work, are divided in three parts: Extractions of the parameters of wavelets from the ultrasonic echo of the detected defect - the second part is devoted to principal components analysis
(PCA) for optimization of the attributes vector. And finally to establish the algorithm of classification (SVM, Support Vector Machine) which allows discrimination between a plane defect and a
volumic defect. We have completed this work by a conclusion where we draw up a summary of the completed works, as well as the robustness of the
various algorithms proposed in this study.
Abstract: Elateriospermum tapos seed (buah perah) is the one
of the rich sources of polyunsaturated fatty acids. It contains high
percentage of oleic acid which is the important component to develop
nervous system and also α-linolenic acid (ALA) which is the
precursor of omega-3 fatty acids series to synthesize
eicosapentaenoic acid (EPA) and docosahexaenoic acid (DHA).
However, there is less study about this valuable oilseed and exploit
its potential. Therefore, this paper is to assess the comparison of
physico-chemical properties and fatty composition of perah oil to
palm oil and soybean oil. From the comparison, perah oil shows low
peroxide value means it has good oxidative stability and also high
iodine values shows that it can be used in paint industry. The study
shown that perah oil is comparable to palm oil and soybean oil, so it
has high potential to be exploited in the oleochemical,
pharmaceutical, cosmetics and paint industries.