Abstract: The theatre-auditorium under investigation following
the highly reflective characteristics of materials used in it (marble,
painted wood, smooth plaster, etc), architectural and structural
features of the Protocol and its intended use (very multifunctional:
Auditorium, theatre, cinema, musicals, conference room) from the
analysis of the statement of fact made by the acoustic simulation
software Ramsete and supported by data obtained through a
campaign of acoustic measurements of the state of fact made on the
spot by a Fonomet Svantek model SVAN 957, appears to be
acoustically inadequate. After the completion of the 3D model
according to the specifications necessary software used forecast in
order to be recognized by him, have made three simulations, acoustic
simulation of the state of and acoustic simulation of two design
solutions.
Improved noise characteristics found in the first design solution,
compared to the state in fact consists therefore in lowering
Reverberation Time that you turn most desirable value, while the
Indicators of Clarity, the Baricentric Time, the Lateral Efficiency,
Ratio of Low Tmedia BR and defined the Speech Intelligibility
improved significantly. Improved noise characteristics found instead
in the second design solution, as compared to first design solution, is
finally mostly in a more uniform distribution of Leq and in lowering
Reverberation Time that you turn the optimum values. Indicators of
Clarity, and the Lateral Efficiency improve further but at the expense
of a value slightly worse than the BR. Slightly vary the remaining
indices.
Abstract: This article simulates the wind generator set which has
two fault bearing collar rail destruction and the gear box oil leak fault.
The electric current signal which produced by the generator, We use
Empirical Mode Decomposition (EMD) as well as Fast Fourier
Transform (FFT) obtains the frequency range-s signal figure and
characteristic value. The last step is use a kind of Artificial Neural
Network (ANN) classifies which determination fault signal's type and
reason. The ANN purpose of the automatic identification wind
generator set fault..
Abstract: This paper presents an analytical method to solve
governing consolidation parabolic partial differential equation (PDE)
for inelastic porous Medium (soil) with consideration of variation of
equation coefficient under cyclic loading. Since under cyclic loads,
soil skeleton parameters change, this would introduce variable
coefficient of parabolic PDE. Classical theory would not rationalize
consolidation phenomenon in such condition. In this research, a
method based on time space mapping to a virtual time space along
with superimposing rule is employed to solve consolidation of
inelastic soils in cyclic condition. Changes of consolidation
coefficient applied in solution by modification of loading and
unloading duration by introducing virtual time. Mapping function is
calculated based on consolidation partial differential equation results.
Based on superimposing rule a set of continuous static loads in
specified times used instead of cyclic load. A set of laboratory
consolidation tests under cyclic load along with numerical
calculations were performed in order to verify the presented method.
Numerical solution and laboratory tests results showed accuracy of
presented method.
Abstract: the objective of this study is to measure the levels of
cellulas activity of ostrich GI microorganisms, and comparing it with
the levels of cellulas activity of rumen-s microorganisms, and also to
estimate the probability of increasing enzyme activity with injecting
different dosages (30%, 50% and 70%) of pure anaerobic goat rumen
fungi. The experiment was conducted in laboratory and under a
complete anaerobic condition (in vitro condition). 40 ml of
“CaldWell" medium and 1.4g wheat straw were placed in incubator
for an hour. The cellulase activity of ostrich microorganisms was
compared with other treatments, and then different dosages (30%,
50% and 70%) of pure anaerobic goat rumen fungi were injected to
ostrich microorganism-s media. Due to the results, cattle and goat
with 2.13 and 2.08 I.U (international units) respectively showed the
highest activity and ostrich with 0.91 (I.U) had the lowest cellulose
activity (p < 0.05). Injecting 30% and 50% of anaerobic fungi had no
significant incensement in enzyme activity, but with injecting 70% of
rumen fungi to ostrich microorganisms culture a significant increase
was observed 1.48 I.U. (p < 0.05).
Abstract: Process planning and production scheduling play
important roles in manufacturing systems. In this paper a multiobjective
mixed integer linear programming model is presented for
the integrated planning and scheduling of multi-product. The aim is
to find a set of high-quality trade-off solutions. This is a
combinatorial optimization problem with substantially large solution
space, suggesting that it is highly difficult to find the best solutions
with the exact search method. To account for it, a PSO-based
algorithm is proposed by fully utilizing the capability of the
exploration search and fast convergence. To fit the continuous PSO
in the discrete modeled problem, a solution representation is used in
the algorithm. The numerical experiments have been performed to
demonstrate the effectiveness of the proposed algorithm.
Abstract: Suppose KY and KX are large sets of observed and
reference signals, respectively, each containing N signals. Is it possible to construct a filter F : KY → KX that requires a priori
information only on few signals, p N, from KX but performs better than the known filters based on a priori information on every
reference signal from KX? It is shown that the positive answer is
achievable under quite unrestrictive assumptions. The device behind
the proposed method is based on a special extension of the piecewise
linear interpolation technique to the case of random signal sets. The proposed technique provides a single filter to process any signal from
the arbitrarily large signal set. The filter is determined in terms of pseudo-inverse matrices so that it always exists.
Abstract: In this paper, zigbee communication based wireless energy surveillance system is presented. The proposed system consists of multiple energy surveillance devices and an energy surveillance monitor. Each different standby power-off value of electric device is set automatically by using learning function of energy surveillance device. Thus adaptive standby power-off function provides user convenience and it maximizes the energy savings. Also, power consumption monitoring function is helpful to reduce inefficient energy consumption in home. The zigbee throughput simulator is designed to evaluate minimum transmission power and maximum allowable information quantity in the proposed system. The test result of prototype has been satisfied all the requirements. The proposed system has confirmed that can be used as an intelligent energy surveillance system for energy savings in home or office.
Abstract: The present work deals with optimization of cascade refrigeration system using eco friendly refrigerants pair R507A and R23. R507A is azeotropic mixture composed of HFC refrigerants R125/R143a (50%/50% by wt.). R23 is a single component HFC refrigerant used as replacement to CFC refrigerant R13 in low temperature applications. These refrigerants have zero ozone depletion potential and are non-flammable. Optimization of R507AR23 cascade refrigeration system performance parameters such as minimum work required, refrigeration effect, coefficient of performance and exergetic efficiency was carried out in terms of eight operating parameters- combinations using Genetic Algorithm tool. The eight operating parameters include (1) low side evaporator temperature (2) high side condenser temperature (3) temperature difference in the cascade heat exchanger (4) low side condenser temperature (5) low side degree of subcooling (6) high side degree of subcooling (7) low side degree of superheating (8) high side degree of superheating. Results show that for minimum work system should operate at high temperature in low side evaporator, low temperature in high side condenser, low temperature difference in cascade condenser, high temperature in low side condenser and low degree of subcooling and superheating in both side. For maximum refrigeration effect system should operate at high temperature in low side evaporator, high temperature in high side condenser, high temperature difference in cascade condenser, low temperature in low side condenser and higher degree of subcooling in LT and HT side. For maximum coefficient of performance and exergetic efficiency, system should operate at high temperature in low side evaporator, low temperature in high side condenser, low temperature difference in cascade condenser, high temperature in low side condenser and higher degree of subcooling and superheating in low side of the system.
Abstract: Optimization and control of reactive power
distribution in the power systems leads to the better operation of the
reactive power resources. Reactive power control reduces
considerably the power losses and effective loads and improves the
power factor of the power systems. Another important reason of the
reactive power control is improving the voltage profile of the power
system. In this paper, voltage and reactive power control using
Neural Network techniques have been applied to the 33 shines-
Tehran Electric Company. In this suggested ANN, the voltages of PQ
shines have been considered as the input of the ANN. Also, the
generators voltages, tap transformers and shunt compensators have
been considered as the output of ANN. Results of this techniques
have been compared with the Linear Programming. Minimization of
the transmission line power losses has been considered as the
objective function of the linear programming technique. The
comparison of the results of the ANN technique with the LP shows
that the ANN technique improves the precision and reduces the
computation time. ANN technique also has a simple structure and
this causes to use the operator experience.
Abstract: In this paper, we propose an easily computable proximity index for predicting voltage collapse of a load bus using only measured values of the bus voltage and power; Using these measurements a polynomial of fourth order is obtained by using LES estimation algorithms. The sum of the absolute values of the polynomial coefficient gives an idea of the critical bus. We demonstrate the applicability of our proposed method on 6 bus test system. The results obtained verify its applicability, as well as its accuracy and the simplicity. From this indicator, it is allowed to predict the voltage instability or the proximity of a collapse. Results obtained by the PV curve are compared with corresponding values by QV curves and are observed to be in close agreement.
Abstract: In situ observation of absorption spectral change of
heptil viologen cation radical (HV+.) was performed by slab optical
waveguide (SOWG) spectroscopy utilizing indium-tin-oxide (ITO)
electrodes. Synchronizing with electrochemical techniques, we
observed the adsorption process of HV+.on the ITO electrode. In this
study, we carried out the ITO-SOWG observations using KBr aqueous
solution containing different concentration of HV to investigate the
concentration dependent spectral change. A few specific absorption
bands, which indicated HV+.existed as both monomer and dimer on
ITO electrode surface with a monolayer or a few layers deposition,
were observed in UV-visible region. The change in the peak position
of the absorption spectra from adsorption species of HV+. were
correlated with the concentration of HV as well as the electrode
potential.
Abstract: Surface currents play a major role in the distribution
of contaminants, the connectivity of marine populations, and can
influence the vertical and horizontal distribution of nutrients within
the water column. This paper aims to determine the effects of sea
breeze-wind patterns on the climatology of the surface currents on the
continental shelf surrounding Rottnest Island, WA Australia. The
alternating wind patterns allow for full cyclic rotations of wind
direction, permitting the interpretation of the effect of the wind on the
surface currents. It was found that the surface currents only clearly
follow the northbound Capes Current in times when the Fremantle
Doctor sets in. Surface currents react within an hour to a change of
direction of the wind, allowing southerly currents to dominate during
strong northerly sea breezes, often followed by mixed currents
dominated by eddies in the inter-lying times.
Abstract: Retinoic acid is like a steroid hormone that plays a
role in embryo formation, proliferation of spermatogonia cells,
ephitelial cells differentiation and organogenesis. Retinoic acid can
influences seminiferous tubule formation during embryonic testis
development and also play a role in the regulation of ovarian function
and female reproductive tract by suppressing the hormones FSH
receptor expression. The excessive use of retinoic acid caused
abnormalities in the fetus. The result showed that there is the
influence of retinoic acid on the developmet of mice fetal testes, for
examples disruption of the formation of seminiferous tubules and
tubules seemed to be hollow, spermatogonia cells are relatively few
in number and caused Leydig cells count relatively more. While in
the female fetus does not caused the formation of primordial follicles
and disrupted the development of germinal ephitelial cells of fetal
ovaries of female mice (mus musculus) Swiss Webster.
Abstract: Cloud Computing has recently emerged as a
compelling paradigm for managing and delivering services over the
internet. The rise of Cloud Computing is rapidly changing the
landscape of information technology, and ultimately turning the longheld
promise of utility computing into a reality. As the development
of Cloud Computing paradigm is speedily progressing, concepts, and
terminologies are becoming imprecise and ambiguous, as well as
different technologies are interfering. Thus, it becomes crucial to
clarify the key concepts and definitions. In this paper, we present the
anatomy of Cloud Computing, covering its essential concepts,
prominent characteristics, its affects, architectural design and key
technologies. We differentiate various service and deployment
models. Also, significant challenges and risks need are tackled in
order to guarantee the long-term success of Cloud Computing. The
aim of this paper is to provide a better understanding of the anatomy
of Cloud Computing and pave the way for further research in this
area.
Abstract: Software-as-a-Service (SaaS) is a form of cloud
computing that relieves the user of the burden of hardware and
software installation and management. SaaS can be used at the course
level to enhance curricula and student experience. When cloud
computing and SaaS are included in educational literature, the focus
is typically on implementing administrative functions. Yet, SaaS can
make more immediate and substantial contributions to the technical
course content in educational offerings. This paper explores cloud
computing and SaaS, provides examples, reports on experiences
using SaaS to offer specialized software in courses, and analyzes the
advantages and disadvantages of using SaaS at the course level. The
paper contributes to the literature in higher education by analyzing
the major technical concepts, potential, and constraints for using
SaaS to deliver specialized software at the course level. Further it
may enable more educators and students to benefit from this
emerging technology.
Abstract: We study the problem of decision making with Dempster-Shafer belief structure. We analyze the previous work developed by Yager about using the ordered weighted averaging (OWA) operator in the aggregation of the Dempster-Shafer decision process. We discuss the possibility of aggregating with an ascending order in the OWA operator for the cases where the smallest value is the best result. We suggest the introduction of the ordered weighted geometric (OWG) operator in the Dempster-Shafer framework. In this case, we also discuss the possibility of aggregating with an ascending order and we find that it is completely necessary as the OWG operator cannot aggregate negative numbers. Finally, we give an illustrative example where we can see the different results obtained by using the OWA, the Ascending OWA (AOWA), the OWG and the Ascending OWG (AOWG) operator.
Abstract: This paper considers inference under progressive type II censoring with a compound Rayleigh failure time distribution. The maximum likelihood (ML), and Bayes methods are used for estimating the unknown parameters as well as some lifetime parameters, namely reliability and hazard functions. We obtained Bayes estimators using the conjugate priors for two shape and scale parameters. When the two parameters are unknown, the closed-form expressions of the Bayes estimators cannot be obtained. We use Lindley.s approximation to compute the Bayes estimates. Another Bayes estimator has been obtained based on continuous-discrete joint prior for the unknown parameters. An example with the real data is discussed to illustrate the proposed method. Finally, we made comparisons between these estimators and the maximum likelihood estimators using a Monte Carlo simulation study.
Abstract: The purposes of this research were 1) to study
consumer-based equity of luxury brands, 2) to study consumers-
purchase intention for luxury brands, 3) to study direct factors
affecting purchase intention towards luxury brands, and 4) to study
indirect factors affecting purchase intention towards luxury brands
through brand consciousness and brand equity to analyze information
by descriptive statistic and hierarchical stepwise regression analysis.
The findings revealed that the eight variables of the framework which
were: need for uniqueness, normative susceptibility, status
consumption, brand consciousness, brand awareness, perceived
quality, brand association, and brand loyalty affected the purchase
intention of the luxury brands (at the significance of 0.05). Brand
Loyalty had the strongest direct effect while status consumption had
the strongest indirect effect affecting the purchase intention towards
luxury brands. Brand consciousness and brand equity had the
mediators through the purchase intention of the luxury brands (at the
significance of 0.05).
Abstract: A high precision temperature insensitive current and voltage reference generator is presented. It is specifically developed for temperature compensated oscillator. The circuit, designed using MXIC 0.5um CMOS technology, has an operating voltage that ranges from 2.6V to 5V and generates a voltage of 1.21V and a current of 6.38 ӴA. It exhibits a variation of ±0.3nA for the current reference and a stable output for voltage reference as the temperature is varied from 0°C to 70°C. The power supply rejection ratio obtained without any filtering capacitor at 100Hz and 10MHz is -30dB and -12dB respectively.
Abstract: In synchronized games players make their moves simultaneously
rather than alternately. Synchronized Quadromineering is
the synchronized version of Quadromineering, a variants of a classical
two-player combinatorial game called Domineering. Experimental
results for small m × n boards (with m + n < 15) and some
theoretical results for general k × n boards (with k = 4, 5, 6) are
presented. Moreover, some Synchronized Quadromineering variants
are also investigated.