Abstract: In the given article the creative arts is being
investigated in the modern era and from the aspect of the artistic
interrelationship, having created by the character of his personality
and as the viewer. A study in the identity formation terms, the
definition of its being unique, unity and similarity as a global issue of
the XXI century has been conducted by the analyzing the definitions
which characterize the human nature in the arts. Spiritual universality
and human existence have been considered in the art system as a
human who is a creator, as the man hero and as the character who is
the recipient as well as the analyses which have been conducted
along with the worldwide cultural and historical processes.
Abstract: The anomalous generation of plasma blocks by
interaction of petawatt-picosecond laser pulses permits side-on
ignition of uncompressed solid fusion fuel following an improved
application of the hydrodynamic Chu-model for deuterium-tritium.
The new possibility of side-on laser ignition depends on accelerated
ions and produced ions beams of high energy particles by the
nonlinear ponderomotive force of the laser pulse in the plasma block,
a re-evaluation of the early hydrodynamic analysis for ignition of
inertial fusion by including inhibition factor, collective effect of
stopping power of alpha particles and the energy loss rate
reabsorption to plasma by the protons of plasma blocks being
reduced by about a factor 40.
Abstract: Homogeneous Charge Compression (HCCI) Ignition technology has been around for a long time, but has recently received renewed attention and enthusiasm. This paper deals with experimental investigations of HCCI engine using hydrous methanol as a primary fuel and Dimethyl Ether (DME) as an ignition improver. A regular diesel engine has been modified to work as HCCI engine for this investigation. The hydrous methanol is inducted and DME is injected into a single cylinder engine. Hence, hydrous methanol is used with 15% water content in HCCI engine and its performance and emission behavior is documented. The auto-ignition of Methanol is enabled by DME. The quantity of DME varies with respect to the load. In this study, the experiments are conducted independently and the effect of the hydrous methanol on the engine operating limit, heat release rate and exhaust emissions at different load conditions are investigated. The investigation also proves that the Hydrous Methanol with DME operation reduces the oxides of Nitrogen and smoke to an extreme low level which is not possible by the direct injection CI engine. Therefore, it is beneficial to use hydrous methanol-DME HCCI mode while using hydrous methanol in internal Combustion Engines.
Abstract: This paper concerns a formal model to help the
simulation of agent societies where institutional roles and
institutional links can be specified operationally. That is, this paper
concerns institutional roles that can be specified in terms of a minimal behavioral capability that an agent should have in order to
enact that role and, thus, to perform the set of institutional functions that role is responsible for. Correspondingly, the paper concerns
institutional links that can be specified in terms of a minimal
interactional capability that two agents should have in order to, while
enacting the two institutional roles that are linked by that institutional
link, perform for each other the institutional functions supported by
that institutional link. The paper proposes a cognitive architecture
approach to institutional roles and institutional links, that is, an approach in which a institutional role is seen as an abstract cognitive
architecture that should be implemented by any concrete agent (or set of concrete agents) that enacts the institutional role, and in which
institutional links are seen as interactions between the two abstract
cognitive agents that model the two linked institutional roles. We
introduce a cognitive architecture for such purpose, called the
Institutional BCC (IBCC) model, which lifts Yoav Shoham-s BCC
(Beliefs-Capabilities-Commitments) agent architecture to social
contexts. We show how the resulting model can be taken as a means
for a cognitive architecture account of institutional roles and
institutional links of agent societies. Finally, we present an example
of a generic scheme for certain fragments of the social organization
of agent societies, where institutional roles and institutional links are
given in terms of the model.
Abstract: The purpose of this research is to compare the original
intra-oral digital dental radiograph images with images that are
enhanced using a combination of image processing algorithms. Intraoral
digital dental radiograph images are often noisy, blur edges and
low in contrast. A combination of sharpening and enhancement
method are used to overcome these problems. Three types of
proposed compound algorithms used are Sharp Adaptive Histogram
Equalization (SAHE), Sharp Median Adaptive Histogram
Equalization (SMAHE) and Sharp Contrast adaptive histogram
equalization (SCLAHE). This paper presents an initial study of the
perception of six dentists on the details of abnormal pathologies and
improvement of image quality in ten intra-oral radiographs. The
research focus on the detection of only three types of pathology
which is periapical radiolucency, widen periodontal ligament space
and loss of lamina dura. The overall result shows that SCLAHE-s
slightly improve the appearance of dental abnormalities- over the
original image and also outperform the other two proposed
compound algorithms.
Abstract: Optical Character Recognition (OCR) is a very old and of great interest in pattern recognition field. In this paper we introduce a very powerful approach to recognize Persian text. We have used morphological operators, especially Hit/Miss operator to descript each sub-word and by using a template matching approach we have tried to classify generated description. We used just one font in two different sizes to verify our approach. We achieved a very good rate, up to 99.9%.
Abstract: This paper presents the experimental results on effect of applied voltage stress frequency to the occurrence of electrical treeing in 22 kV cross linked polyethylene (XLPE) insulated cable.Hallow disk of XLPE insulating material with thickness 5 mm taken from unused high voltage cable was used as the specimen in this study. Stainless steel needle was inserted gradually into the specimen to give a tip to earth plane electrode separation of 2.50.2 mm at elevated temperature 105-110°C. The specimen was then annealed for 5 minute to minimize any mechanical stress build up around the needle-plane region before it was cooled down to room temperature. Each specimen were subjected to the same applied voltage stress level at 8 kV AC rms, with various frequency, 50, 100, 500, 1000 and 2000 Hz. Initiation time, propagation speed and pattern of electrical treeing were examined in order to study the effect of applied voltage stress frequency. By the experimental results, initial time of visible treeing decreases with increasing in applied voltage frequency. Also, obviously, propagation speed of electrical treeing increases with increasing in applied voltage frequency.Furthermore, two types of electrical treeing, bush-like and branch-like treeing were observed.The experimental results confirmed the effect of voltage stress frequency as well.
Abstract: A theoretical study of the rigidities of slabs with
circular voids oriented in the longitudinal and in the transverse
direction is discussed. Equations are presented for predicting the
bending and torsional rigidities of the voided slabs. This paper
summarizes the results of an extensive literature search and initial
review of the current methods of analyzing voided slab. The various
methods of calculating the equivalent plate parameters, which are
necessary for two-dimensional analysis, are also reviewed. Static
deflections on voided slabs are shown to be in good agreement with
proposed equation.
Abstract: In this paper the fatigue crack initiation location of double shear lap joints, treated by interference fit and bolt clamping, have been investigated both experimentally and numerically. To do so, using the fracture section of available fatigue tested specimens of interference fitted and torque tightened Aluminum 2024-T3 plates, the crack initiation location was determined. The stress distribution attained from the finite element analysis was used to help explain the results observed in the experimental tests. The results showed that the fatigue crack initiation location changes from top and mid plane at the hole edge to somewhere far from the hole edge (stress concentration region) in different combination of clamping force, interference fit size and applied cyclic load ranges. It is worth mentioning that the fatigue crack initiation location affects the fatigue life of the specimens too.
Abstract: The role of knowledge is a determinative factor in the
life of economy and society. To determine knowledge is not an easy
task yet the real task is to determine the right knowledge. From this
view knowledge is a sum of experience, ideas and cognitions which
can help companies to remain in markets and to realize a maximum
profit. At the same time changes of circumstances project in advance
that contents and demands of the right knowledge are changing. In
this paper we will analyse a special segment on the basis of an
empirical survey. We investigated the behaviour and strategies of
small and medium sized enterprises (SMEs) in the area of
knowledge-handling. This survey was realized by questionnaires and
wide range statistical methods were used during processing. As a
result we will show how these companies are prepared to operate in a
knowledge-based economy and in which areas they have prominent
deficiencies.
Abstract: Tacit knowledge has been one of the most discussed
and contradictory concepts in the field of knowledge management
since the mid 1990s. The concept is used relatively vaguely to refer
to any type of information that is difficult to articulate, which has led
to discussions about the original meaning of the concept (adopted
from Polanyi-s philosophy) and the nature of tacit knowing. It is
proposed that the subject should be approached from the perspective
of cognitive science in order to connect tacit knowledge to
empirically studied cognitive phenomena. Some of the most
important examples of tacit knowing presented by Polanyi are
analyzed in order to trace the cognitive mechanisms of tacit knowing
and to promote better understanding of the nature of tacit knowledge.
The cognitive approach to Polanyi-s theory reveals that the
tacit/explicit typology of knowledge often presented in the
knowledge management literature is not only artificial but totally
opposite approach compared to Polanyi-s thinking.
Abstract: In modern human computer interaction systems
(HCI), emotion recognition is becoming an imperative characteristic.
The quest for effective and reliable emotion recognition in HCI has
resulted in a need for better face detection, feature extraction and
classification. In this paper we present results of feature space analysis
after briefly explaining our fully automatic vision based emotion
recognition method. We demonstrate the compactness of the feature
space and show how the 2d/3d based method achieves superior features
for the purpose of emotion classification. Also it is exposed that
through feature normalization a widely person independent feature
space is created. As a consequence, the classifier architecture has
only a minor influence on the classification result. This is particularly
elucidated with the help of confusion matrices. For this purpose
advanced classification algorithms, such as Support Vector Machines
and Artificial Neural Networks are employed, as well as the simple k-
Nearest Neighbor classifier.
Abstract: This paper presents a boarding on biometric
authentication through the Keystrokes Dynamics that it intends to
identify a person from its habitual rhythm to type in conventional
keyboard. Seven done experiments: verifying amount of prototypes,
threshold, features and the variation of the choice of the times of the
features vector. The results show that the use of the Keystroke
Dynamics is simple and efficient for personal authentication, getting
optimum resulted using 90% of the features with 4.44% FRR and 0%
FAR.
Abstract: Skin color based tracking techniques often assume a
static skin color model obtained either from an offline set of library
images or the first few frames of a video stream. These models
can show a weak performance in presence of changing lighting or
imaging conditions. We propose an adaptive skin color model based
on the Gaussian mixture model to handle the changing conditions.
Initial estimation of the number and weights of skin color clusters
are obtained using a modified form of the general Expectation
maximization algorithm, The model adapts to changes in imaging
conditions and refines the model parameters dynamically using spatial
and temporal constraints. Experimental results show that the method
can be used in effectively tracking of hand and face regions.
Abstract: One of the difficulties of the vibration-based damage identification methods is the nonuniqueness of the results of damage identification. The different damage locations and severity may cause the identical response signal, which is even more severe for detection of the multiple damage. This paper proposes a new strategy for damage detection to avoid this nonuniqueness. This strategy firstly determines the approximates damage area based on the statistical pattern recognition method using the dynamic strain signal measured by the distributed fiber Bragg grating, and then accurately evaluates the damage information based on the Bayesian model updating method using the experimental modal data. The stochastic simulation method is then used to compute the high-dimensional integral in the Bayesian problem. Finally, an experiment of the plate structure, simulating one part of mechanical structure, is used to verify the effectiveness of this approach.
Abstract: The lack of inclusive housing in Australia contributes
to the marginalization and exclusion of people with disability and
older people from family and community life. The Australian
government has handed over the responsibility of increasing the
supply of inclusive housing to the housing industry through an agreed
national access standard and a voluntary strategy. Voluntary
strategies have not been successful in other constituencies and little is
known about what would work in Australia today. Findings from a
research project into the voluntariness of the housing industry
indicate that a reliable and consistent supply is unlikely without an
equivalent increase in demand. The strategy has, however, an
important role to play in the task of changing housing industry
practices towards building more inclusive communities.
Abstract: Robust face recognition under various illumination
environments is very difficult and needs to be accomplished for
successful commercialization. In this paper, we propose an improved
illumination normalization method for face recognition. Illumination
normalization algorithm based on anisotropic smoothing is well known
to be effective among illumination normalization methods but
deteriorates the intensity contrast of the original image, and incurs less
sharp edges. The proposed method in this paper improves the previous
anisotropic smoothing-based illumination normalization method so
that it increases the intensity contrast and enhances the edges while
diminishing the effect of illumination variations. Due to the result of
these improvements, face images preprocessed by the proposed
illumination normalization method becomes to have more distinctive
feature vectors (Gabor feature vectors) for face recognition. Through
experiments of face recognition based on Gabor feature vector
similarity, the effectiveness of the proposed illumination
normalization method is verified.
Abstract: Shoots, with three leaves, of Paphiopedilum 'Delrosi'
were used as explants for multiple shoot induction. Modified
Hyponex medium was supplemented with thidiazuron (TDZ), N6-
benzyladenine (BA) or kinetin (Kn) alone and in combinations with
2,4-dichlorophenoxyacetic acid (2,4-D). All explants were cultured
for 15 weeks. It was found that TDZ alone at the concentration of
0.45μM or in combination with 4.52μM 2,4-D and 8.88μM BA in
combination with 13.56μM 2,4-D promoted multiple shoots. The
highest shoot sprouting efficiencies (80.0, 90.0 and 80.0%) and new
shoot numbers (1.5, 1.3 and 1.1) were obtained, respectively. Fresh
weight, height, numbers of leaf and root of new shoots and initial
explants were discussed.
Abstract: In this work, several ASP solutions were flooded into
fractured models initially saturated with heavy oil at a constant flow
rate and different geometrical characteristics of fracture. The ASP
solutions are constituted from 2 polymers i.e. a synthetic polymer,
hydrolyzed polyacrylamide as well as a biopolymer, a surfactant and
2types of alkaline. The results showed that using synthetic
hydrolyzed polyacrylamide polymer increases ultimate oil recovery;
however, type of alkaline does not play a significant rule on oil
recovery. In addition, position of the injection well respect to the
fracture system has remarkable effects on ASP flooding. For instance
increasing angle of fractures with mean flow direction causes more
oil recovery and delays breakthrough time. This work can be
accounted as a comprehensive survey on ASP flooding which
considers most of effective factors in this chemical EOR method.
Abstract: A novel nanofinishing process using improved ball
end magnetorheological (MR) finishing tool was developed for finishing of flat as well as 3D surfaces of ferromagnetic and non ferromagnetic workpieces. In this process a magnetically controlled
ball end of smart MR polishing fluid is generated at the tip surface of
the tool which is used as a finishing medium and it is guided to
follow the surface to be finished through computer controlled 3-axes
motion controller. The experiments were performed on ferromagnetic
workpiece surface in the developed MR finishing setup to study the effect of finishing time on final surface roughness. The performance
of present finishing process on final finished surface roughness was studied. The surface morphology was observed under scanning
electron microscopy and atomic force microscope. The final surface finish was obtained as low as 19.7 nm from the initial surface
roughness of 142.9 nm. The outcome of newly developed finishing process can be found useful in its applications in aerospace,
automotive, dies and molds manufacturing industries, semiconductor and optics machining etc.