Abstract: The steady-state temperature for one-dimensional transpiration cooling system has been conducted experimentally and numerically to investigate the heat transfer characteristics of combined convection and radiation. The Nickel –Chrome (Ni-Cr) open-cellular porous material having porosity of 0.93 and pores per inch (PPI) of 21.5 was examined. The upper surface of porous plate was heated by the heat flux of incoming radiation varying from 7.7 - 16.6 kW/m2 whereas air injection velocity fed into the lower surface was varied from 0.36 - 1.27 m/s, and was then rearranged as Reynolds number (Re). For the report of the results in the present study, two efficiencies including of temperature and conversion efficiency were presented. Temperature efficiency indicating how close the mean temperature of a porous heat plate to that of inlet air, and increased rapidly with the air injection velocity (Re). It was then saturated and had a constant value at Re higher than 10. The conversion efficiency, which was regarded as the ability of porous material in transferring energy by convection after absorbed from heat radiation, decreased with increasing of the heat flux and air injection velocity. In addition, it was then asymptotic to a constant value at the Re higher than 10. The numerical predictions also agreed with experimental data very well.
Abstract: This paper focuses on Land Use and Land Cover Changes (LULCC) occurred in the urban coastal regions of the Mediterranean basin in the last thirty years. LULCC were assessed diachronically (1975-2006) in two urban areas, Rome (Italy) and Athens (Greece), by using CORINE land cover maps. In strictly coastal territories a persistent growth of built-up areas at the expenses of both agricultural and forest land uses was found. On the contrary, a different pattern was observed in the surrounding inland areas, where a high conversion rate of the agricultural land uses to both urban and forest land uses was recorded. The impact of city growth on the complex pattern of coastal LULCC is finally discussed.
Abstract: All Text processing systems allow their users to
search a pattern of string from a given text. String matching is
fundamental to database and text processing applications. Every text
editor must contain a mechanism to search the current document for
arbitrary strings. Spelling checkers scan an input text for words in the
dictionary and reject any strings that do not match. We store our
information in data bases so that later on we can retrieve the same
and this retrieval can be done by using various string matching
algorithms. This paper is describing a new string matching algorithm
for various applications. A new algorithm has been designed with the
help of Rabin Karp Matcher, to improve string matching process.
Abstract: As the web continues to grow exponentially, the idea
of crawling the entire web on a regular basis becomes less and less
feasible, so the need to include information on specific domain,
domain-specific search engines was proposed. As more information
becomes available on the World Wide Web, it becomes more difficult
to provide effective search tools for information access. Today,
people access web information through two main kinds of search
interfaces: Browsers (clicking and following hyperlinks) and Query
Engines (queries in the form of a set of keywords showing the topic
of interest) [2]. Better support is needed for expressing one's
information need and returning high quality search results by web
search tools. There appears to be a need for systems that do reasoning
under uncertainty and are flexible enough to recover from the
contradictions, inconsistencies, and irregularities that such reasoning
involves. In a multi-view problem, the features of the domain can be
partitioned into disjoint subsets (views) that are sufficient to learn the
target concept. Semi-supervised, multi-view algorithms, which
reduce the amount of labeled data required for learning, rely on the
assumptions that the views are compatible and uncorrelated. This
paper describes the use of semi-structured machine learning approach
with Active learning for the “Domain Specific Search Engines". A
domain-specific search engine is “An information access system that
allows access to all the information on the web that is relevant to a
particular domain. The proposed work shows that with the help of
this approach relevant data can be extracted with the minimum
queries fired by the user. It requires small number of labeled data and
pool of unlabelled data on which the learning algorithm is applied to
extract the required data.
Abstract: Along with the advances in medicine, providing medical information to individual patient is becoming more important. In Japan such information via Braille is hardly provided to blind and partially sighted people. Thus we are researching and developing a Web-based automatic translation program “eBraille" to translate Japanese text into Japanese Braille. First we analyzed the Japanese transcription rules to implement them on our program. We then added medical words to the dictionary of the program to improve its translation accuracy for medical text. Finally we examined the efficacy of statistical learning models (SLMs) for further increase of word segmentation accuracy in braille translation. As a result, eBraille had the highest translation accuracy in the comparison with other translation programs, improved the accuracy for medical text and is utilized to make hospital brochures in braille for outpatients and inpatients.
Abstract: The paper depicts air velocity values, reproduced by laser Doppler anemometer (LDA) and ultrasonic anemometer (UA), relations with calculated ones from flow rate measurements using the gas meter which calibration uncertainty is ± (0.15 – 0.30) %. Investigation had been performed in channel installed in aerodynamical facility used as a part of national standard of air velocity. Relations defined in a research let us confirm the LDA and UA for air velocity reproduction to be the most advantageous measures. The results affirm ultrasonic anemometer to be reliable and favourable instrument for measurement of mean velocity or control of velocity stability in the velocity range of 0.05 m/s – 10 (15) m/s when the LDA used. The main aim of this research is to investigate low velocity regularities, starting from 0.05 m/s, including region of turbulent, laminar and transitional air flows. Theoretical and experimental results and brief analysis of it are given in the paper. Maximum and mean velocity relations for transitional air flow having unique distribution are represented. Transitional flow having distinctive and different from laminar and turbulent flow characteristics experimentally have not yet been analysed.
Abstract: Hemorrhage Disease of Grass Carp (HDGC) is a kind
of commonly occurring illnesses in summer, and the extremely high
death rate result in colossal losses to aquaculture. As the complex
connections among each factor which influences aquiculture diseases,
there-s no quit reasonable mathematical model to solve the problem at
present.A BP neural network which with excellent nonlinear mapping
coherence was adopted to establish mathematical model;
Environmental factor, which can easily detected, such as breeding
density, water temperature, pH and light intensity was set as the main
analyzing object. 25 groups of experimental data were used for
training and test, and the accuracy of using the model to predict the
trend of HDGC was above 80%. It is demonstrated that BP neural
network for predicating diseases in HDGC has a particularly
objectivity and practicality, thus it can be spread to other aquiculture
disease.
Abstract: Due to the three- dimensional flow pattern interacting with bed material, the process of local scour around bridge piers is complex. Modeling 3D flow field and scour hole evolution around a bridge pier is more feasible nowadays because the computational cost and computational time have significantly decreased. In order to evaluate local flow and scouring around a bridge pier, a completely three-dimensional numerical model, SSIIM program, was used. The model solves 3-D Navier-Stokes equations and a bed load conservation equation. The model was applied to simulate local flow and scouring around a bridge pier in a large natural river with four piers. Computation for 1 day of flood condition was carried out to predict the maximum local scour depth. The results show that the SSIIM program can be used efficiently for simulating the scouring in natural rivers. The results also showed that among the various turbulence models, the k-ω model gives more reasonable results.
Abstract: In the present article, a new method has been developed to enhance the application of equipment monitoring, which in turn results in improving condition-based maintenance economic impact in an automobile parts manufacturing factory. This study also describes how an effective software with a simple database can be utilized to achieve cost-effective improvements in maintenance performance. The most important results of this project are indicated here: 1. 63% reduction in direct and indirect maintenance costs. 2. Creating a proper database to analyse failures. 3. Creating a method to control system performance and develop it to similar systems. 4. Designing a software to analyse database and consequently create technical knowledge to face unusual condition of the system. Moreover, the results of this study have shown that the concept and philosophy of maintenance has not been understood in most Iranian industries. Thus, more investment is strongly required to improve maintenance conditions.
Abstract: Today with the rapid growth of telecommunications equipment, electronic and developing more and more networks of power, influence of electromagnetic waves on one another has become hot topic discussions. So in this article, this issue and appropriate mechanisms for EMC operations have been presented. First, a source of alternating current (50 Hz) and a clear victim in a certain distance from the source is placed. With this simple model, the effects of electromagnetic radiation from the source to the victim will be investigated and several methods to reduce these effects have been presented. Therefore passive and active shields have been used. In some steps, shielding effectiveness of proposed shields will be compared. . It should be noted that simulations have been done by the finite element method (FEM).
Abstract: Despite the strong and consistent increase in the use of
electronic payment methods worldwide, the diffusion of electronic
wallets is still far from widespread. Analysis of the failure of
electronic wallet uptake has either focused on technical issues or
chosen to analyse a specific scheme. This article proposes a joint
approach to analysing key factors affecting the adoption of e-wallets
by using the ‘Technology Acceptance Model” [1] which we have
expanded to take into account the cost of using e-wallets. We use this
model to analyse Monéo, the only French electronic wallet still in
operation.
Abstract: In the study of honeycomb crushing under quasistatic loading, two parameters are important, the mean crushing stress and the wavelength of the folding mode. The previous theoretical models did not consider the true cylindrical curvature effects and the flow stress in the folding mode of honeycomb material. The present paper introduces a modification on Wierzbicki-s model based on considering two above mentioned parameters in estimating the mean crushing stress and the wavelength through implementation of the energy method. Comparison of the results obtained by the new model and Wierzbicki-s model with existing experimental data shows better prediction by the model presented in this paper.
Abstract: The purpose of this research was to demonstrate
prevalence of post-exposure preventive measures (PEP) after needlestick
injuries and its relationship with locus of control beliefs in a
sample of medical students. In this cross-sectional study, 300 medical
students with history of having experienced needle stick injuries
(NSI) for at least once filled in a questionnaire to determine if they
perceived themselves to be responsible and effective in preventing
blood born infections after NSI. About 38% of students did not seek
any professional consult or PEP after NSI due to lack of enough time
or access, anxiety about tests results, belief in uselessness of followup
and not being able to change destiny. These 114 students were not
different from others regarding their scores on NSI specific scale of
locus of health control. Thus, the potentiality of NSI locus of control
beliefs in predicting PEP was not seen in this study.
Abstract: This paper is concerned with the role strategic
management plays in higher education and the methods it entails.
Using the University of West Bohemia and the Czech Republic as
examples, the paper describes the methods used in furthering
strategic objectives within institutions and their different parts
(faculties, institutes). The nature of the demands faced by the
university dictates the need for a strategic framework which defines
the basic objectives and parameters of tertiary education and research
in a local, regional and national context. Sharing strategies with a
wider range of actors (universities, cities, regions, the practical
sphere) is key to laying the foundations for more efficient
cooperation.
Abstract: Project managers are the ultimate responsible for the
overall characteristics of a project, i.e. they should deliver the project
on time with minimum cost and with maximum quality. It is vital for
any manager to decide a trade-off between these conflicting
objectives and they will be benefited of any scientific decision
support tool. Our work will try to determine optimal solutions (rather
than a single optimal solution) from which the project manager will
select his desirable choice to run the project. In this paper, the
problem in project scheduling notated as
(1,T|cpm,disc,mu|curve:quality,time,cost) will be studied. The
problem is multi-objective and the purpose is finding the Pareto
optimal front of time, cost and quality of a project
(curve:quality,time,cost), whose activities belong to a start to finish
activity relationship network (cpm) and they can be done in different
possible modes (mu) which are non-continuous or discrete (disc), and
each mode has a different cost, time and quality . The project is
constrained to a non-renewable resource i.e. money (1,T). Because
the problem is NP-Hard, to solve the problem, a meta-heuristic is
developed based on a version of genetic algorithm specially adapted
to solve multi-objective problems namely FastPGA. A sample project
with 30 activities is generated and then solved by the proposed
method.
Abstract: Reliability assessment and risk analysis of rotating
machine rotors in various overload and malfunction situations
present challenge to engineers and operators. In this paper a new
analytical method for evaluation of rotor under large deformation is
addressed. Model is presented in general form to include also
composite rotors. Presented simulation procedure is based on
variational work method and has capability to account for geometric
nonlinearity, large displacement, nonlinear support effect and rotor
contacting other machine components. New shape functions are
presented which capable to predict accurate nonlinear profile of
rotor. The closed form solutions for various operating and
malfunction situations are expressed. Analytical simulation results
are discussed
Abstract: In Mauritius, much emphasis is put on measures to
combat the high prevalence of non-communicable diseases (NCDs).
Health promotion campaigns for the adoption of healthy behaviors
and screening programs are done regularly by local authorities and
NCD surveys are carried out at intervals. However, the health
behaviors of the poor have not been investigated so far. This study
aims to give an insight on the perceptions of health status and
lifestyle health behaviors of poor people in Mauritius. A crosssectional
study among 83 persons benefiting from social aid in a
selected urban district was carried out. Results showed that 51.8% of
respondents perceived that they had good health status. 57.8% had no
known NCD whilst 25.3% had hypertension, followed by diabetes
(16.9%), asthma (9.6%) and heart disease (7.2%).They had low
smoking (10.8%) and alcohol consumption (6.0%) as well as high
physical activity prevalence (54.2%). These results were significantly
different from the NCD survey carried out in the general population.
Consumption of vegetables in the study was high. Overweight and
obesity trends were however similar to the NCD survey report 2009.
These findings contrast with other international studies showing poor
people having poor perceptions of health status and unhealthy
behavioral choices. Whether these positive health behaviors of poor
people in Mauritius arise out of choice or whether it is because the
alternative behavior is too costly remains to be investigated further.
Abstract: The machining performance is determined by the
frequency characteristics of the machine-tool structure and the
dynamics of the cutting process. Therefore, the prediction of dynamic
vibration behavior of spindle tool system is of great importance for the
design of a machine tool capable of high-precision and high-speed
machining. The aim of this study is to develop a finite element model
to predict the dynamic characteristics of milling machine tool and
hence evaluate the influence of the preload of the spindle bearings. To
this purpose, a three dimensional spindle bearing model of a high
speed engraving spindle tool was created. In this model, the rolling
interfaces with contact stiffness defined by Harris model were used to
simulate the spindle bearing components. Then a full finite element
model of a vertical milling machine was established by coupling the
spindle tool unit with the machine frame structure. Using this model,
the vibration mode that had a dominant influence on the dynamic
stiffness was determined. The results of the finite element simulations
reveal that spindle bearing with different preloads greatly affect the
dynamic behavior of the spindle tool unit and hence the dynamic
responses of the vertical column milling system. These results were
validated by performing vibration on the individual spindle tool unit
and the milling machine prototype, respectively. We conclude that
preload of the spindle bearings is an important component affecting
the dynamic characteristics and machining performance of the entire
vertical column structure of the milling machine.
Abstract: This paper proposes a new performance characterization for the test strategy intended for second order filters denominated Transient Analysis Method (TRAM). We evaluate the ability of the addressed test strategy for detecting deviation faults under simultaneous statistical fluctuation of the non-faulty parameters. For this purpose, we use Monte Carlo simulations and a fault model that considers as faulty only one component of the filter under test while the others components adopt random values (within their tolerance band) obtained from their statistical distributions. The new data reported here show (for the filters under study) the presence of hard-to-test components and relatively low fault coverage values for small deviation faults. These results suggest that the fault coverage value obtained using only nominal values for the non-faulty components (the traditional evaluation of TRAM) seem to be a poor predictor of the test performance.
Abstract: By the application of an improved back-propagation
neural network (BPNN), a model of current densities for a solid oxide
fuel cell (SOFC) with 10 layers is established in this study. To build
the learning data of BPNN, Taguchi orthogonal array is applied to
arrange the conditions of operating parameters, which totally 7 factors
act as the inputs of BPNN. Also, the average current densities
achieved by numerical method acts as the outputs of BPNN.
Comparing with the direct solution, the learning errors for all learning
data are smaller than 0.117%, and the predicting errors for 27
forecasting cases are less than 0.231%. The results show that the
presented model effectively builds a mathematical algorithm to predict
performance of a SOFC stack immediately in real time.
Also, the calculating algorithms are applied to proceed with the
optimization of the average current density for a SOFC stack. The
operating performance window of a SOFC stack is found to be
between 41137.11 and 53907.89. Furthermore, an inverse predicting
model of operating parameters of a SOFC stack is developed here by
the calculating algorithms of the improved BPNN, which is proved to
effectively predict operating parameters to achieve a desired
performance output of a SOFC stack.