Abstract: Urbanization and regionalization are two different
approaches when it comes to economical structures and development,
infrastructure and mobility, quality of life and living, education,
social cohesion and many other topics. At first glance, the structures
associated with urbanization and regionalization seems to be
contradicting. This paper discusses possibilities of transfer and
cooperation between rural and urban structures. An empirical
investigation contributed to reveal scenarios of supposable forms of
exchange and cooperation of remote rural areas and big cities.
Abstract: Various methods of geofield parameters restoration (by algebraic polynoms; filters; rational fractions; interpolation splines; geostatistical methods – kriging; search methods of nearest points – inverse distance, minimum curvature, local – polynomial interpolation; neural networks) have been analyzed and some possible mistakes arising during geofield surface modeling have been presented.
Abstract: Trihalogenmethanes are the most significant byproducts of the reaction of disinfection agent with organic precursors naturally present in ground and surface waters.Their incidence negatively affects the quality of drinking water in relation to their nephrotoxic, hepatotoxic and genotoxic effects on human health. Taking into consideration the considerable volatility of monitored contaminants it could be assumed that their incidence in drinking water would depend on the distance of sampling from the area of disinfection. Based on the concentration of trihalogenmethanes determined with the help of gas chromatography with mass detector and the analysis of variance (ANOVA) such dependence has been proved as statistically significant. The acquired outcomes will be used for assessing the non-carcinogenic and genotoxic risks to consumers.
Abstract: Turbulent forced convection flow in a 2-dimensional channel over periodic grooves is numerically investigated. Finite volume method is used to study the effect of turbulence model. The range of Reynolds number varied from 10000 to 30000 for the ribheight to channel-height ratio (B/H) of 2. The downstream wall is heated by a uniform heat flux while the upstream wall is insulated. The investigation is analyzed with different types of nanoparticles such as SiO2, Al2O3, and ZnO, with water as a base fluid are used. The volume fraction is varied from 1% to 4% and the nanoparticle diameter is utilized between 20nm to 50nm. The results revealed 114% heat transfer enhancement compared to the water in a grooved channel by using SiO2 nanoparticle with volume fraction and nanoparticle diameter of 4% and 20nm respectively.
Abstract: Deep cold rolling (DCR) is a cold working process, which easily produces a smooth and work-hardened surface by plastic deformation of surface irregularities. In the present study, the influence of main deep cold rolling process parameters on the surface roughness and the hardness of AISI 4140 steel were studied by using fractional factorial design of experiments. The assessment of the surface integrity aspects on work material was done, in terms of identifying the predominant factor amongst the selected parameters, their order of significance and setting the levels of the factors for minimizing surface roughness and/or maximizing surface hardness. It was found that the ball diameter, rolling force, initial surface roughness and number of tool passes are the most pronounced parameters, which have great effects on the work piece-s surface during the deep cold rolling process. A simple, inexpensive and newly developed DCR tool, with interchangeable collet for using different ball diameters, was used throughout the experimental work presented in this paper.
Abstract: In this paper, we study FPGA implementation of a
novel supra-optimal receiver diversity combining technique,
generalized maximal ratio combining (GMRC), for wireless
transmission over fading channels in SIMO systems. Prior
published results using ML-detected GMRC diversity signal
driven by BPSK showed superior bit error rate performance to
the widely used MRC combining scheme in an imperfect
channel estimation (ICE) environment. Under perfect channel
estimation conditions, the performance of GMRC and MRC
were identical. The main drawback of the GMRC study was
that it was theoretical, thus successful FPGA implementation
of it using pipeline techniques is needed as a wireless
communication test-bed for practical real-life situations.
Simulation results showed that the hardware implementation
was efficient both in terms of speed and area. Since diversity
combining is especially effective in small femto- and picocells,
internet-associated wireless peripheral systems are to
benefit most from GMRC. As a result, many spinoff
applications can be made to the hardware of IP-based 4th
generation networks.
Abstract: An Ad hoc wireless network comprises of mobile
terminals linked and communicating with each other sans the aid of
traditional infrastructure. Optimized Link State Protocol (OLSR) is a
proactive routing protocol, in which routes are discovered/updated
continuously so that they are available when needed. Hello messages
generated by a node seeks information about its neighbor and if the
latter fails to respond to a specified number of hello messages
regulated by neighborhood hold time, the node is forced to assume
that the neighbor is not in range. This paper proposes to evaluate
OLSR routing protocol in a random mobility network having various
neighborhood hold time intervals. The throughput and delivery ratio
are also evaluated to learn about its efficiency for multimedia loads.
Abstract: Restructured electricity markets may provide
opportunities for producers to exercise market power maintaining
prices in excess of competitive levels. In this paper an oligopolistic
market is presented that all Generation Companies (GenCos) bid in a
Cournot model. Genetic algorithm (GA) is applied to obtain
generation scheduling of each GenCo as well as hourly market
clearing prices (MCP). In order to consider network constraints a
multiperiod framework is presented to simulate market clearing
mechanism in which the behaviors of market participants are
modelled through piecewise block curves. A mixed integer linear
programming (MILP) is employed to solve the problem. Impacts of
market clearing process on participants- characteristic and final
market prices are presented. Consequently, a novel multi-objective
model is addressed for security constrained optimal bidding strategy
of GenCos. The capability of price-maker GenCos to alter MCP is
evaluated through introducing an effective-supply curve. In addition,
the impact of exercising market power on the variation of market
characteristics as well as GenCos scheduling is studied.
Abstract: Low oxygen content vanadium powder was
prepared by hydrogenation dehydrogenization (HDH). The
effect of purification treatment on hydrogen absorption kinetics
of dendritic vanadium was tested, and the effects of milling
technique on powder yield and grain size were studied. The
crystal phase, oxygen and nitrgen content, and grain size of
prepared powder were characterized and analyzed by X-ray
diffraction (XRD), oxygen and nitrogen analyzer and grain size
analyzer. The results show that the alkaline cleaning can
improve the hydrogen absorption of vanadium. The yield of
vanadium hydride powder can reach as high as 90% by 4h
ball-milling, The resultant product also have an oxygen content
less than 600μg/g, and the grain size is smaller than 37μm.
Meanwhile, the XRD results show that the phase of hydride
vanadium powder is mainly VH0.81. After a hydrogen
desorption treatment in vacuum at 700Ôäâ, the phase of the
powder converts into V and a little of V2H.
Abstract: In this paper we present the algorithm which allows
us to have an object tracking close to real time in Full HD videos.
The frame rate (FR) of a video stream is considered to be between
5 and 30 frames per second. The real time track building will be
achieved if the algorithm can follow 5 or more frames per second. The
principle idea is to use fast algorithms when doing preprocessing to
obtain the key points and track them after. The procedure of matching
points during assignment is hardly dependent on the number of points.
Because of this we have to limit pointed number of points using the
most informative of them.
Abstract: The Ministry of Defense (MoD) spends hundreds of
millions of dollars on software to support its infrastructure, operate
its weapons and provide command, control, communications,
computing, intelligence, surveillance, and reconnaissance (C4ISR)
functions. These and other all new advanced systems have a common
critical component is information technology. Defense and
Aerospace environment is continuously striving to keep up with
increasingly sophisticated Information Technology (IT) in order to
remain effective in today-s dynamic and unpredictable threat
environment. This makes it one of the largest and fastest growing
expenses of Defense. Hundreds of millions of dollars spent a year on
IT projects. But, too many of those millions are wasted on costly
mistakes. Systems that do not work properly, new components that
are not compatible with old once, trendily new applications that do
not really satisfy defense needs or lost though poorly managed
contracts.
This paper investigates and compiles the effective strategies that
aim to end exasperation with low returns and high cost of
Information Technology Acquisition for defense; it tries to show how
to maximize value while reducing time and expenditure.
Abstract: Alumina matrix composites with addition of hexagonal boron nitride (hBN), acting as solid lubricant, were produced. Main purpose of solid lubricants is to dispose the necessity of using cooling lubricants in machining process. Hot pressing was used as a consolidating process for Al2O3-x%wt.hBN (x=1/ 2,5/ 5 /7,5 /10) composites. Properties of sinters such as relative density, hardness, Young-s modulus and fracture toughness were examined. Obtained samples characterize by high relative density. Hardness and fracture toughness values allow the use of alumina – hBN composites for machining steels even in hardened condition. However it was observed that high weight content of hBN can negatively influence the mechanical properties of composites.
Abstract: Manufacturing components of fiber-reinforced
thermoplastics requires three steps: heating the matrix, forming and
consolidation of the composite and terminal cooling the matrix. For
the heating process a pre-determined temperature distribution through
the layers and the thickness of the pre-consolidated sheets is
recommended to enable forming mechanism. Thus, a design for the
heating process for forming composites with thermoplastic matrices
is necessary. To obtain a constant temperature through thickness and
width of the sheet, the heating process was analyzed by the help of
the finite element method. The simulation models were validated by
experiments with resistance thermometers as well as with an infrared
camera. Based on the finite element simulation, heating methods for
infrared radiators have been developed. Using the numeric
simulation many iteration loops are required to determine the process
parameters. Hence, the initiation of a model for calculating relevant
process parameters started applying regression functions.
Abstract: In this paper we report a study aimed at determining
the most effective animation technique for representing ASL
(American Sign Language) finger-spelling. Specifically, in the study
we compare two commonly used 3D computer animation methods
(keyframe animation and motion capture) in order to ascertain which
technique produces the most 'accurate', 'readable', and 'close to
actual signing' (i.e. realistic) rendering of ASL finger-spelling. To
accomplish this goal we have developed 20 animated clips of fingerspelled
words and we have designed an experiment consisting of a
web survey with rating questions. 71 subjects ages 19-45 participated
in the study. Results showed that recognition of the words was
correlated with the method used to animate the signs. In particular,
keyframe technique produced the most accurate representation of the
signs (i.e., participants were more likely to identify the words
correctly in keyframed sequences rather than in motion captured
ones). Further, findings showed that the animation method had an
effect on the reported scores for readability and closeness to actual
signing; the estimated marginal mean readability and closeness was
greater for keyframed signs than for motion captured signs. To our
knowledge, this is the first study aimed at measuring and comparing
accuracy, readability and realism of ASL animations produced with
different techniques.
Abstract: Technological innovation capability (TIC) is
defined as a comprehensive set of characteristics of a firm that
facilities and supports its technological innovation strategies.
An audit to evaluate the TICs of a firm may trigger
improvement in its future practices. Such an audit can be used
by the firm for self assessment or third-party independent
assessment to identify problems of its capability status. This
paper attempts to develop such an auditing framework that
can help to determine the subtle links between innovation
capabilities and business performance; and to enable the
auditor to determine whether good practice is in place. The
seven TICs in this study include learning, R&D, resources
allocation, manufacturing, marketing, organization and
strategic planning capabilities. Empirical data was acquired
through a survey study of 200 manufacturing firms in the
Hong Kong/Pearl River Delta (HK/PRD) region. Structural
equation modelling was employed to examine the
relationships among TICs and various performance indicators:
sales performance, innovation performance, product
performance, and sales growth. The results revealed that
different TICs have different impacts on different
performance measures. Organization capability was found to
have the most influential impact. Hong Kong manufacturers
are now facing the challenge of high-mix-low-volume
customer orders. In order to cope with this change, good
capability in organizing different activities among various
departments is critical to the success of a company.
Abstract: Combustion, emission and performance
characterization of a single cylinder diesel engine using methanol
diesel blends was carried out. The blends were 5% (v/v) methanol in
diesel (MD05) and 10% (v/v) methanol in diesel (MD10). The
problem of solubility of methanol and diesel was addressed by an
agitator placed inside the fuel tank to prevent phase separation. The
results indicated that total combustion duration was reduced by15.8%
for MD05 and 31.27% for MD10compared to the baseline data.
Ignition delay was increased with increasing methanol volume
fraction in the test fuel. Total cyclic heat release was reduced by
1.5% for MD05 and 6.7% for MD10 as compared to diesel baseline.
Emissions of carbon monoxide, hydrocarbons along with smoke were
reduced and that of nitrogen oxides were increased with rising
methanol contents in the test fuel. Full load brake thermal efficiency
was marginally reduced with increased methanol composition in the
blend.
Abstract: Municipal solid waste (MSW) comprises of a wide
range of heterogeneous materials generated by individual, household
or organization and may include food waste, garden wastes, papers,
textiles, rubbers, plastics, glass, ceramics, metals, wood wastes,
construction wastes but it is not limited to the above mentioned
fractions. The most common Municipal Solid Waste pretreatment
method in use is thermal pretreatment (incineration) and Mechanical
Biological pretreatment. This paper presents an overview of these
two pretreatment methods describing their benefits and laboratory
scale reactors that simulate landfill conditions were constructed in
order to compare emissions in terms of biogas production and
leachate contamination between untreated Municipal Solid Waste and
Mechanical Biological Pretreated waste. The findings of this study
showed that Mechanical Biological pretreatment of waste reduces the
emission level of waste and the benefit over the landfilling of
untreated waste is significant.
Abstract: The paper presents new results of a recent industry
supported research and development study in which an efficient
framework for evaluating practical and meaningful power system
reliability and quality indices was applied. The system-wide
integrated performance indices are capable of addressing and
revealing areas of deficiencies and bottlenecks as well as
redundancies in the composite generation-transmission-demand
structure of large-scale power grids. The technique utilizes a linear
programming formulation, which simulates practical operating
actions and offers a general and comprehensive framework to assess
the harmony and compatibility of generation, transmission and
demand in a power system. Practical applications to a reduced
system model as well as a portion of the Saudi power grid are also
presented in the paper for demonstration purposes.
Abstract: The lack of any centralized infrastructure in mobile ad
hoc networks (MANET) is one of the greatest security concerns in
the deployment of wireless networks. Thus communication in
MANET functions properly only if the participating nodes cooperate
in routing without any malicious intention. However, some of the
nodes may be malicious in their behavior, by indulging in flooding
attacks on their neighbors. Some others may act malicious by
launching active security attacks like denial of service. This paper
addresses few related works done on trust evaluation and
establishment in ad hoc networks. Related works on flooding attack
prevention are reviewed. A new trust approach based on the extent of
friendship between the nodes is proposed which makes the nodes to
co-operate and prevent flooding attacks in an ad hoc environment.
The performance of the trust algorithm is tested in an ad hoc network
implementing the Ad hoc On-demand Distance Vector (AODV)
protocol.
Abstract: This paper studies the effect of different compression
constraints and schemes presented in a new and flexible paradigm to
achieve high compression ratios and acceptable signal to noise ratios
of Arabic speech signals. Compression parameters are computed for
variable frame sizes of a level 5 to 7 Discrete Wavelet Transform
(DWT) representation of the signals for different analyzing mother
wavelet functions. Results are obtained and compared for Global
threshold and level dependent threshold techniques. The results
obtained also include comparisons with Signal to Noise Ratios, Peak
Signal to Noise Ratios and Normalized Root Mean Square Error.