Abstract: The discrete-time uncertain system with time delay is investigated for bounded input bounded output (BIBO). By constructing an augmented Lyapunov function, three different sufficient conditions are established for BIBO stabilization. These conditions are expressed in the form of linear matrix inequalities (LMIs), whose feasibility can be easily checked by using Matlab LMI Toolbox. Two numerical examples are provided to demonstrate the effectiveness of the derived results.
Abstract: As the new industrial revolution advances in the
nanotechnology have been followed with interest throughout the
world and also in Turkey. Media has an important role in conveying
these advances to public, rising public awareness and creating
attitudes related to nanotechnology. As well as representing how a
subject is treated, media frames determine how public think about
this subject. In literature definite frames related to nanoscience and
nanotechnology such as process, regulation, conflict and risks were
mentioned in studies focusing different countries. So how
nanotechnology news is treated by which frames and in which news
categories in Turkey as a one of developing countries? In this study
examining different variables about nanotechnology that affect
public attitudes such as category, frame, story tone, source in Turkish
media via framing analysis developed in agenda setting studies was
aimed. In the analysis data between 2005 and 2009 obtained from the
first five national newspapers with wide circulation in Turkey will be
used. In this study the direction of the media about nanotechnology,
in which frames nanotechnologic advances brought to agenda were
reported as news, and sectoral, legal, economic and social scenes
reflected by these frames to public related to nanotechnology in
Turkey were planned.
Abstract: There are few studies on eggshell of leatherback turtle
which is endangered species in Thailand. This study was focusing on
the ultrastructure and elemental composition of leatherback turtle
eggshells collected from Andaman Sea Shore, Thailand during the
nesting season using scanning electron microscope (SEM). Three
eggshell layers of leatherback turtle; the outer cuticle layer or
calcareous layer, the middle layer or middle multistrata layer and the
inner fibrous layer were recognized. The outer calcareous layer was
thick and porosity which consisted of loose nodular units of various
crystal shapes and sizes. The loose attachment between these units
resulted in numerous spaces and openings. The middle layer was
compact thick with several multistrata and contained numerous
openings connecting to both outer cuticle layer and inner fibrous
layer. The inner fibrous layer was compact and thin, and composed of
numerous reticular fibers. Energy dispersive X-ray microanalysis
detector revealed energy spectrum of X-rays character emitted from
all elements on each layer. The percentages of all elements were
found in the following order: carbon (C) > oxygen (O) > calcium
(Ca) > sulfur (S) > potassium (K) > aluminum (Al) > iodine (I) >
silicon (Si) > chlorine (Cl) > sodium (Na) > fluorine (F) >
phosphorus (P) > magnesium (Mg). Each layer consisted of high
percentage of CaCO3 (approximately 98%) implying that it was
essential for turtle embryonic development. A significant difference
was found in the percentages of Ca and Mo in the 3layers. Moreover,
transition metal, metal and toxic non-metal contaminations were
found in leatherback turtle eggshell samples. These were palladium
(Pd), molybdenum (Mo), copper (Cu), aluminum (Al), lead (Pb), and
bromine (Br). The contamination elements were seen in the outer
layers except for Mo. All elements were readily observed and
mapped using Smiling program. X-ray images which mapped the
location of all elements were showed. Calcium containing in the
eggshell appeared in high contents and was widely distributing in
clusters of the outer cuticle layer to form CaCO3 structure. Moreover,
the accumulation of Na and Cl was observed to form NaCl which was
widely distributing in 3 eggshell layers. The results from this study
would be valuable on assessing the emergent success in this
endangered species.
Abstract: We present an operator for a propositional linear temporal logic over infinite schedules of iterated transactions, which, when applied to a formula, asserts that any schedule satisfying the formula is serializable. The resulting logic is suitable for specifying and verifying consistency properties of concurrent transaction management systems, that can be defined in terms of serializability, as well as other general safety and liveness properties. A strict form of serializability is used requiring that, whenever the read and write steps of a transaction occurrence precede the read and write steps of another transaction occurrence in a schedule, the first transaction must precede the second transaction in an equivalent serial schedule. This work improves on previous work in providing a propositional temporal logic with a serializability operator that is of the same PSPACE complete computational complexity as standard propositional linear temporal logic without a serializability operator.
Abstract: The effect of different tempering temperatures and heat treatment times on the corrosion resistance of austenitic stainless steels in oxalic acid was studied in this work using conventional weight loss and electrochemical measurements. Typical 304 and 316 stainless steel samples were tempered at 150oC, 250oC and 350oC after being austenized at 1050oC for 10 minutes. These samples were then immersed in 1.0M oxalic acid and their weight losses were measured at every five days for 30 days. The results show that corrosion of both types of ASS samples increased with an increase in tempering temperature and time and this was due to the precipitation of chromium carbides at the grain boundaries of these metals. Electrochemical results also confirm that the 304 ASS is more susceptible to corrosion than 316 ASS in this medium. This is attributed to the molybdenum in the composition of the latter. The metallographic images of these samples showed non–uniform distribution of precipitated chromium carbides at the grain boundaries of these metals and unevenly distributed carbides and retained austenite phases which cause galvanic effects in the medium.
Abstract: In Thailand, the practice of pre-hospital Emergency
Medical Service (EMS) in each area reveals the different growth
rates and effectiveness of the practices. Those can be found as the
diverse quality and quantity. To shorten the learning curve prior to
speed-up the practices in other areas, story telling and lessons learnt
from the effective practices are valued as meaningful knowledge. To
this paper, it was to ascertain the factors, lessons learnt and best
practices that have impact as contributing to the success of prehospital
EMS system. Those were formulized as model prior to
speedup the practice in other areas. To develop the model, Malcolm
Baldrige National Quality Award (MBNQA), which is widely
recognized as a framework for organizational quality assessment and
improvement, was chosen as the discussion framework. Remarkably,
this study was based on the consideration of knowledge capture;
however it was not to complete the loop of knowledge activities.
Nevertheless, it was to highlight the recognition of knowledge
capture, which is the initiation of knowledge management.
Abstract: The paper studies implications between knowledge spillovers and technological innovation capability in the following three aspects: firstly, the paper debates on the effect of knowledge spillover on some perspectives of technological innovation ability; secondly, it discusses how different roles of knowledge spillover affect the technological innovation capability; finally, the paper creates the model of the factors of knowledge spillovers influencing to technological innovation capability. It concludes that knowledge spillovers affect all the main aspects of technological innovation ultimately to impact of technological innovation capabilities.
Abstract: The city of Suceava, one of the most important
medieval capital of Moldova, owes its urban genesis to the power
center established in its territory at the turn of the thirteenth and
fourteenth centuries. Freed from the effective control exercised by
the Emir Nogai through Alanians, the local center of power evolved
as the main representative of the interests of indigenous people in
relation to the Hungarian Angevin dinasty and to their
representatives from Maramures. From this perspective, the political
and military role of the settlement of Suceava was archeologically
proved by the discovery of extensive fortifications, unrivaled in the
first half of the XIVth century-s Moldavia. At the end of that century,
voivod Peter I decides to move the capital of the state from Siret to
Suceava. That option stimulated the development of the settlement
on specific urban coordinates.
Abstract: The rising growth of the GSM cellular phone industry has tightening competition level between providers in making strategies enhancing the market shares in Indonesia. Tsel, as one of those companies, has to determine the proper strategy to sustain as well as improve the market share without reducing its operational income level. Portfolio simulation model is designed with a dynamic system approach. The result of this research is a recommendation to the company by optimizing its technological policies, services, and promotions. The tariff policies and the signal quality should not be the main focus because this company has had a large number of customers and a good infrastructural condition.
Abstract: Void formation in underfill is considered as failure
in flip chip manufacturing process. Void formation possibly caused
by several factors such as poor soldering and flux residue during
die attach process, void entrapment due moisture contamination,
dispense pattern process and setting up the curing process. This
paper presents the comparison of single step and two steps curing
profile towards the void and black dots formation in underfill for
Hi-CTE Flip Chip Ceramic Ball Grid Array Package (FC-CBGA).
Statistic analysis was conducted to analyze how different factors
such as wafer lot, sawing technique, underfill fillet height and
curing profile recipe were affected the formation of voids and
black dots. A C-Mode Scanning Aqoustic Microscopy (C-SAM)
was used to scan the total count of voids and black dots. It was
shown that the 2 steps curing profile provided solution for void
elimination and black dots in underfill after curing process.
Abstract: In this paper a novel algorithm is proposed that integrates the process of fuzzy hierarchy generation and rule discovery for automated discovery of Production Rules with Fuzzy Hierarchy (PRFH) in large databases.A concept of frequency matrix (Freq) introduced to summarize large database that helps in minimizing the number of database accesses, identification and removal of irrelevant attribute values and weak classes during the fuzzy hierarchy generation.Experimental results have established the effectiveness of the proposed algorithm.
Abstract: Age and sex are biological terms that are socioculturally
constructed for marriage and marital sexual behavior in
every society. Marriage is a universal norm that makes legitimate
sexual behavior between a man and a woman in marital life cycle to
gain bio-social purposes. Cross-cultural studies reveal that marital
sexual frequency as a part of marital sexual behavior not only varies
within the couple-s life cycle, but also varies between and among
couples in diverse cultures. The purpose of the study was to compare
marital sexual frequency in association with age status and length of
marital relationship between Muslim and Santal couples in rural
Bangladesh. For this we assumed that (1) Santal culture compared to
Muslim culture preferred earlier age at marriage for meeting marital
sexual purposes in rural Bangladesh; (2) Marital duration among the
Muslim couples was higher than that among the Santal couples; (3)
Sexual frequency among the younger couples in both the ethnic
communities was higher than the older couples; (4) Sexual frequency
across the Muslim couples- marital life cycle was higher than that the
Santal couples- marital life cycle. In so doing, 288 active couples
(145 for Muslim and 143 for Santal) selected by cluster random
sampling were interviewed with questionnaire method. The findings
of Independent Samples T Test on age at marriage, current age,
marital duration and sexual frequency independently reveal that there
were significant differences in sexual frequency not only across the
couples- life cycle but also vary between the Muslim and Santal
couples in relation to marital duration. The results of Pearson-s Inter-
Correlation Coefficients reveal that although age at marriage, current
age and marital duration for husband and wife were significantly
positive correlated with each other between the communities, there
were significantly negative correlation between the age at marriage,
current age, marital duration and sexual frequency among the
selected couples between the communities.
Abstract: The radio frequency identification (RFID) is a
technology for automatic identification of items, particularly in
supply chain, but it is becoming increasingly important for industrial
applications. Unlike barcode technology that detects the optical
signals reflected from barcode labels, RFID uses radio waves to
transmit the information from an RFID tag affixed to the physical
object. In contrast to today most often use of this technology in
warehouse inventory and supply chain, the focus of this paper is an
overview of the structure of RFID systems used by RFID technology
and it also presents a solution based on the application of RFID for
brand authentication, traceability and tracking, by implementing a
production management system and extending its use to traders.
Abstract: Micro droplet formation is considered as a growing
emerging area of research due to its wide-range application in
chemistry as well as biology. The mechanism of micro droplet
formation using two immiscible liquids running through a T-junction
has been widely studied.
We believe that the flow of these two immiscible phases can be of
greater important factor that could have an impact on out-flow
hydrodynamic behavior, the droplets generated and the size of the
droplets. In this study, the type of the capillary tubes used also
represents another important factor that can have an impact on the
generation of micro droplets.
The tygon capillary tubing with hydrophilic inner surface doesn't
allow regular out-flows due to the fact that the continuous phase
doesn't adhere to the wall of the capillary inner surface.
Teflon capillary tubing, presents better wettability than tygon
tubing, and allows to obtain steady and regular regimes of out-flow,
and the micro droplets are homogeneoussize.
The size of the droplets is directly dependent on the flows of the
continuous and dispersed phases. Thus, as increasing the flow of the
continuous phase, to flow of the dispersed phase stationary, the size
of the drops decreases. Inversely, while increasing the flow of the
dispersed phase, to flow of the continuous phase stationary, the size
of the droplet increases.
Abstract: The most widely used semiconductor memory types
are the Dynamic Random Access Memory (DRAM) and Static
Random Access memory (SRAM). Competition among memory
manufacturers drives the need to decrease power consumption and
reduce the probability of read failure. A technology that is relatively
new and has not been explored is the FinFET technology. In this
paper, a single cell Schmitt Trigger Based Static RAM using FinFET
technology is proposed and analyzed. The accuracy of the result is
validated by means of HSPICE simulations with 32nm FinFET
technology and the results are then compared with 6T SRAM using
the same technology.
Abstract: As communications systems and technology become more advanced and complex, it will be increasingly important to focus on users- individual needs. Personalization and effective user profile management will be necessary to ensure the uptake and success of new services and devices and it is therefore important to focus on the users- requirements in this area and define solutions that meet these requirements. The work on personalization and user profiles emerged from earlier ETSI work on a Universal Communications Identifier (UCI) which is a unique identifier of the user rather than a range of identifiers of the many of communication devices or services (e.g. numbers of fixed phone at home/work, mobile phones, fax and email addresses). This paper describes work on personalization including standardized information and preferences and an architectural framework providing a description of how personalization can be integrated in Next Generation Networks, together with the UCI concept.
Abstract: These days we face with so many advertisements in
magazines, those mentioned coaching is pragmatic specialties which
help people make change in their lives. Up to know Specialty coaches
are not necessarily therapists, consultants or psychologist, thus they
may not know psychological theories. The International Coach
Federation identifies "facilitating learning and results" as one of its
four core coach competencies, without understanding learning
theories coaching practice hangs in theoretical abyss. Thus the aim of
this article is investigating learning theories within coaching process.
Therefore, I reviewed some cognitive and behavioral learning
theories and analyzed their contribution with coaching process which
has been introduced in mentor coaches and ICF certified coaches'
papers and books. The result demonstrated that coaching profession
is strongly grounded in learning theories, and it will be strengthened
by the validation of theories and evidence-based research as we move
forward. Thus, it needs more research in order to applying effective
theoretical frameworks.
Abstract: We investigated the effects of modified
preprogrammed training mode Chase Trainer from Balance Trainer
(BT3, HurLab, Tampere, Finland) on athlete who experienced
unilateral Patellofemoral Pain Syndrome (PFPS). Twenty-seven
athletes with mean age= 14.23 ±1.31 years, height = 164.89 ± 7.85
cm, weight = 56.94 ± 9.28 kg were randomly assigned to two groups:
experiment (EG; n = 14) and injured (IG; n = 13). EG performed a
series of Chase Trainer program which required them to shift their
body weight at different directions, speeds and angle of leaning twice
a week for duration of 8 weeks. The static postural control and
perceived pain level measures were taken at baseline, after 6 weeks
and 8 weeks of training. There was no significant difference in any of
tested variables between EG and IG before and after 6-week the
intervention period. However, after 8-week of training, the postural
control (eyes open) and perceived pain level of EG improved
compared to IG (p
Abstract: Let p be a prime number, Fp be a finite field and t ∈ F*p= Fp- {0}. In this paper we obtain some properties of ellipticcurves Ep,t: y2= y2= x3- t2x over Fp. In the first sectionwe give some notations and preliminaries from elliptic curves. In the second section we consider the rational points (x, y) on Ep,t. Wegive a formula for the number of rational points on Ep,t over Fnp for an integer n ≥ 1. We also give some formulas for the sum of x?andy?coordinates of the points (x, y) on Ep,t. In the third section weconsider the rank of Et: y2= x3- t2x and its 2-isogenous curve Et over Q. We proved that the rank of Etand Etis 2 over Q. In the last section we obtain some formulas for the sums Σt∈F?panp,t for an integer n ≥ 1, where ap,t denote the trace of Frobenius.
Abstract: In this paper a nonlinear model is presented to
demonstrate the relation between production and marketing
departments. By introducing some functions such as pricing cost and
market share loss functions it will be tried to show some aspects of
market modelling which has not been regarded before. The proposed
model will be a constrained signomial geometric programming
model. For model solving, after variables- modifications an iterative
technique based on the concept of geometric mean will be introduced
to solve the resulting non-standard posynomial model which can be
applied to a wide variety of models in non-standard posynomial
geometric programming form. At the end a numerical analysis will
be presented to accredit the validity of the mentioned model.