Abstract: In this paper an analysis of blackouts in electric power
transmission systems is implemented using a model and studied in
simple networks with a regular topology. The proposed model
describes load demand and network improvements evolving on a
slow timescale as well as the fast dynamics of cascading overloads
and outages.
Abstract: Nuclear matrix protein 22 (NMP22) is a FDA approved
biomarker for bladder cancer. The objective of this study is to develop
a simple NMP22 immumosensor (NMP22-IMS) for accurate
measurement of NMP22. The NMP22-IMS was constructed with
NMP22 antibody immobilized on screen-printed carbon electrodes.
The construction procedures and antibody immobilization are simple.
Results showed that the NMP22-IMS has an excellent (r2³0.95)
response range (20 – 100 ng/mL). In conclusion, a simple and reliable
NMP22-IMS was developed, capable of precisely determining urine
NMP22 level.
Abstract: Water vapour transport properties of gypsum block
are studied in dependence on relative humidity using inverse analysis
based on genetic algorithm. The computational inverse analysis is
performed for the relative humidity profiles measured along the
longitudinal axis of a rod sample. Within the performed transient
experiment, the studied sample is exposed to two environments with
different relative humidity, whereas the temperature is kept constant.
For the basic gypsum characterisation and for the assessment of input
material parameters necessary for computational application of
genetic algorithm, the basic material properties of gypsum are
measured as well as its thermal and water vapour storage parameters.
On the basis of application of genetic algorithm, the relative
humidity dependent water vapour diffusion coefficient and water
vapour diffusion resistance factor are calculated.
Abstract: In the stadium structure, the significant dynamic
responses such as resonance or similar behavior can be occurred by
spectator rhythmical activities. Thus, accurate analysis and precise
investigation of stadium structure that is subjected to dynamic loads
are required for practical design and serviceability check of stadium
structures. Moreover, it is desirable to measure and analyze the
dynamic loads of spectator activities because these dynamic loads can
not be easily expressed in numerical formula. In this study, various
dynamic loads induced by spectator movements are measured and
analyzed. These dynamic loads induced by spectators movement of
stadium structure can be classified into the impact load and the
periodic load. These dynamic loads can be expressed as Fourier
harmonic load. And, these dynamic loads could be applied for the
accurate vibration analysis of a stadium structure.
Abstract: The control design for unmanned underwater vehicles (UUVs) is challenging due to the uncertainties in the complex dynamic modeling of the vehicle as well as its unstructured operational environment. To cope with these difficulties, a practical robust control is therefore desirable. The paper deals with the application of coefficient diagram method (CDM) for a robust control design of an autonomous underwater vehicle. The CDM is an algebraic approach in which the characteristic polynomial and the controller are synthesized simultaneously. Particularly, a coefficient diagram (comparable to Bode diagram) is used effectively to convey pertinent design information and as a measure of trade-off between stability, response speed and robustness. In the polynomial ring, Kharitonov polynomials are employed to analyze the robustness of the controller due to parametric uncertainties.
Abstract: The ARMrayan Multimedia Mobile CMS (Content
Management System) is the first mobile CMS that gives the
opportunity to users for creating multimedia J2ME mobile
applications with their desired content, design and logo; simply,
without any need for writing even a line of code. The low-level
programming and compatibility problems of the J2ME, along with
UI designing difficulties, makes it hard for most people –even
programmers- to broadcast their content to the widespread mobile
phones used by nearly all people. This system provides user-friendly,
PC-based tools for creating a tree index of pages and inserting
multiple multimedia contents (e.g. sound, video and picture) in each
page for creating a J2ME mobile application. The output is a standalone
Java mobile application that has a user interface, shows texts
and pictures and plays music and videos regardless of the type of
devices used as long as the devices support the J2ME platform.
Bitmap fonts have also been used thus Middle Eastern languages can
be easily supported on all mobile phone devices. We omitted
programming concepts for users in order to simplify multimedia
content-oriented mobile applictaion designing for use in educational,
cultural or marketing centers. Ordinary operators can now create a
variety of multimedia mobile applications such as tutorials,
catalogues, books, and guides in minutes rather than months.
Simplicity and power has been the goal of this CMS. In this paper,
we present the software engineered-designed concepts of the
ARMrayan MCMS along with the implementation challenges faces
and solutions adapted.
Abstract: Wireless channels are characterized by more serious
bursty and location-dependent errors. Many packet scheduling
algorithms have been proposed for wireless networks to guarantee
fairness and delay bounds. However, most existing schemes do not
consider the difference of traffic natures among packet flows. This
will cause the delay-weight coupling problem. In particular, serious
queuing delays may be incurred for real-time flows. In this paper, it
is proposed a scheduling algorithm that takes traffic types of flows
into consideration when scheduling packets and also it is provided
scheduling flexibility by trading off video quality to meet the
playback deadline.
Abstract: The protection of the contents of digital products is
referred to as content authentication. In some applications, to be able
to authenticate a digital product could be extremely essential. For
example, if a digital product is used as a piece of evidence in the
court, its integrity could mean life or death of the accused. Generally,
the problem of content authentication can be solved using semifragile
digital watermarking techniques. Recently many authors have
proposed Computer Generated Hologram Watermarking (CGHWatermarking)
techniques. Starting from these studies, in this paper
a semi-fragile Computer Generated Hologram coding technique is
proposed, which is able to detect malicious tampering while
tolerating some incidental distortions. The proposed technique uses
as watermark an encrypted image, and it is well suitable for digital
image authentication.
Abstract: In order to increase in chickpea quality and
agroecosystem sustainability, field experiments were carried out in
2007 and 2008 growing seasons. In this research the effects of
different organic, chemical and biological fertilizers were
investigated on grain yield and quality of chickpea. Experimental
units were arranged in split-split plots based on randomized complete
blocks with three replications. The highest amounts of yield and yield
components were obtained in G1×N5 interaction. Significant
increasing of N, P, K, Fe and Mg content in leaves and grains
emphasized on superiority of mentioned treatment because each one
of these nutrients has an approved role in chlorophyll synthesis and
photosynthesis ability of the crop. The combined application of
compost, farmyard manure and chemical phosphorus (N5) had the
best grain quality due to high protein, starch and total sugar contents,
low crude fiber and reduced cooking time.
Abstract: The feature of HIV genome is in a wide range because
of it is highly heterogeneous. Hence, the infection ability of the virus changes related with different chemokine receptors. From this point,
R5 and X4 HIV viruses use CCR5 and CXCR5 coreceptors respectively while R5X4 viruses can utilize both coreceptors. Recently, in Bioinformatics, R5X4 viruses have been studied to
classify by using the coreceptors of HIV genome.
The aim of this study is to develop the optimal Multilayer
Perceptron (MLP) for high classification accuracy of HIV sub-type viruses. To accomplish this purpose, the unit number in hidden layer
was incremented one by one, from one to a particular number. The statistical data of R5X4, R5 and X4 viruses was preprocessed by the
signal processing methods. Accessible residues of these virus sequences were extracted and modeled by Auto-Regressive Model
(AR) due to the dimension of residues is large and different from each other. Finally the pre-processed dataset was used to evolve MLP with various number of hidden units to determine R5X4
viruses. Furthermore, ROC analysis was used to figure out the optimal MLP structure.
Abstract: The objectives were to identify cyanide-degrading
bacteria and study cyanide removal efficiency. Agrobacterium
tumefaciens SUTS 1 was isolated. This is a new strain of
microorganisms for cyanide degradation. The maximum growth rate
of SUTS 1 obtained 4.7 × 108 CFU/ml within 4 days. The cyanide
removal efficiency was studied at 25, 50, and 150 mg/L cyanide. The
residual cyanide, ammonia, nitrate, nitrite, pH, and cell counts were
analyzed. At 25 and 50 mg/L cyanide, SUTS 1 obtained similar
removal efficiency approximately 87.50%. At 150 mg/L cyanide,
SUTS 1 enhanced the cyanide removal efficiency up to 97.90%. Cell
counts of SUTS 1 increased when the cyanide concentration was set
at lower. The ammonia increased when the removal efficiency
increased. The nitrate increased when the ammonia decreased but the
nitrite did not detect in all experiments. pH values also increased
when the cyanide concentrations were set at higher.
Abstract: The main goal of the article is to present new model of
application architecture of banking IT solution providing the Internet
Banking services that is particularly outsourced. At first, we propose
business rationale and a SWOT analysis to explain the reasons for the
model in the article. The most important factor for our model is
nowadays- big boom around smart phones and tablet devices. As
next, we focus on IT architecture viewpoint where we design
application, integration and security model. Finally, we propose a
generic governance model that serves as a basis for the specialized
governance model. The specialized instance of governance model is
designed to ensure that the development and the maintenance of
different parts of the IT solution are well governed in time.
Abstract: Laser beam forming is a novel technique developed for the joining of metallic components. In this study, an overview of the laser beam forming process, areas of application, the basic mechanisms of the laser beam forming process, some recent research
studies and the need to focus more research effort on improving the
laser-material interaction of laser beam forming of titanium and its
alloys are presented.
Abstract: In this paper, an innovative watermarking scheme for audio signal based on genetic algorithms (GA) in the discrete wavelet transforms is proposed. It is robust against watermarking attacks, which are commonly employed in literature. In addition, the watermarked image quality is also considered. We employ GA for the optimal localization and intensity of watermark. The watermark detection process can be performed without using the original audio signal. The experimental results demonstrate that watermark is inaudible and robust to many digital signal processing, such as cropping, low pass filter, additive noise.
Abstract: Systems Analysis and Design is a key subject in
Information Technology courses, but students do not find it easy to
cope with, since it is not “precise" like programming and not exact
like Mathematics. It is a subject working with many concepts,
modeling ideas into visual representations and then translating the
pictures into a real life system. To complicate matters users who are
not necessarily familiar with computers need to give their inputs to
ensure that they get the system the need. Systems Analysis and
Design also covers two fields, namely Analysis, focusing on the
analysis of the existing system and Design, focusing on the design of
the new system. To be able to test the analysis and design of a
system, it is necessary to develop a system or at least a prototype of
the system to test the validity of the analysis and design. The skills
necessary in each aspect differs vastly. Project Management Skills,
Database Knowledge and Object Oriented Principles are all
necessary. In the context of a developing country where students
enter tertiary education underprepared and the digital divide is alive
and well, students need to be motivated to learn the necessary skills,
get an opportunity to test it in a “live" but protected environment –
within the framework of a university. The purpose of this article is to
improve the learning experience in Systems Analysis and Design
through reviewing the underlying teaching principles used, the
teaching tools implemented, the observations made and the
reflections that will influence future developments in Systems
Analysis and Design. Action research principles allows the focus to
be on a few problematic aspects during a particular semester.
Abstract: Chemical and physical functionalization of multiwalled
carbon nanotubes (MWCNT) has been commonly practiced to
achieve better dispersion of carbon nanotubes (CNTs) in polymer
matrix. This work describes various functionalization methods (acidtreatment,
non-ionic surfactant treatment with TritonX-100),
fabrication of MWCNT/PP nanocomposites via melt blending and
characterization of mechanical properties. Microscopy analysis
(FESEM, TEM, XPS) showed effective purification of MWCNTs
under acid treatment, and better dispersion under both chemical and
physical functionalization techniques combined, in their respective
order. Tensile tests showed increase in tensile strength for the
nanocomposites that contain MWCNTs up to 2 wt%. A decrease in
tensile strength was seen in samples that contain 4 wt% of MWCNTs
for both raw and Triton X-100 functionalized, signifying MWCNT
degradation/rebundling at composition with higher content of
MWCNTs. For the acid-treated MWCNTs, however, the tensile
results showed slight improvement even at 4wt%, indicating effective
dispersion of MWCNTs.
Abstract: In this paper we address the issue of classifying the fluorescent intensity of a sample in Indirect Immuno-Fluorescence (IIF). Since IIF is a subjective, semi-quantitative test in its very nature, we discuss a strategy to reliably label the image data set by using the diagnoses performed by different physicians. Then, we discuss image pre-processing, feature extraction and selection. Finally, we propose two ANN-based classifiers that can separate intrinsically dubious samples and whose error tolerance can be flexibly set. Measured performance shows error rates less than 1%, which candidates the method to be used in daily medical practice either to perform pre-selection of cases to be examined, or to act as a second reader.
Abstract: The objective of the research was to study of foot
anthropometry of children aged 7-12 years in the South of Thailand Thirty-three dimensions were measured on 305 male and 295 female
subjects with 3 age ranges (7-12 years old). The instrumentation consists of four types of anthropometer, digital vernier caliper, digital
height gauge and measuring tape. The mean values and standard
deviations of average age, height, and weight of the male subjects were 9.52(±1.70) years, 137.80(±11.55) cm, and 37.57(±11.65) kg.
Female average age, height, and weight subjects were 9.53(±1.70) years, 137.88(±11.55) cm, and 34.90(±11.57) kg respectively. The
comparison of the 33 comparison measured anthropometric. Between
male and female subjects were sexual differences in size on women in almost all areas of significance (p
Abstract: We introduce an algorithm based on the
morphological shared-weight neural network. Being nonlinear and
translation-invariant, the MSNN can be used to create better
generalization during face recognition. Feature extraction is
performed on grayscale images using hit-miss transforms that are
independent of gray-level shifts. The output is then learned by
interacting with the classification process. The feature extraction and
classification networks are trained together, allowing the MSNN to
simultaneously learn feature extraction and classification for a face.
For evaluation, we test for robustness under variations in gray levels
and noise while varying the network-s configuration to optimize
recognition efficiency and processing time. Results show that the
MSNN performs better for grayscale image pattern classification
than ordinary neural networks.
Abstract: Three dimensional simulations are carried out to estimate the effect of wind direction, wind speed and geometry on the flow and dispersion of vehicular pollutant in a street canyon. The pollutant sources are motor vehicles passing between the two buildings. Suitable emission factors for petrol and diesel vehicles at varying vehicle speed are used for the estimation of the rate of emission from the streets. The dispersion of automobile pollutant released from the street is simulated by introducing vehicular emission source term as a fixed-flux boundary condition at the ground level over the road. The emission source term is suitably calculated by adopting emission factors from literature for varying conditions of street traffic. It is observed that increase in wind angle disturbs the symmetric pattern of pollution distribution along the street length. The concentration increases in the far end of the street as compared to the near end.