Abstract: In this study, we are interested in the economic lot
scheduling problem (ELSP) that considers manufacturing of the
serviceable products and remanufacturing of the reworked products. In
this paper, we formulate a mathematical model for the ELSP with
reworks using the basic period approach. In order to solve this
problem, we propose a search algorithm to find the cyclic multiplier ki
of each product that can be cyclically produced for every ki basic
periods. This research also uses two heuristics to search for the optimal
production sequence of all lots and the optimal time length of the basic
period so as to minimize the average total cost. This research uses a
numerical example to show the effectiveness of our approach.
Abstract: Knowledge is a key asset for any organisation to
sustain competitive advantages, but it is difficult to identify and
represent knowledge which is needed to perform activities in
business processes. The effective knowledge management and
support for relevant business activities definitely gives a huge impact
to the performance of the organisation as a whole. This is because
that knowledge have the functions of directing, coordinating and
controlling actions within business processes. The study has
introduced organisational morphology, a norm-based approach by
applying semiotic theories which emphasise on the representation of
knowledge in norms. This approach is concerned with the
identification of activities into three categories: substantive,
communication and control activities. All activities are directed by
norms; hence three types of norms exist; each is associated to a
category of activities. The paper describes the approach briefly and
illustrates the application of this approach through a case study of
academic activities in higher education institutions. The result of the
study shows that the approach provides an effective way to profile
business knowledge and the profile enables the understanding and
specification of business requirements of an organisation.
Abstract: A first intermediate roll of Sendzirmir mills was failure
by surface spalling during operation. After analyzing by visual, stereo
microscope, optical microscope, scanning electron microscope,
glow-discharged spectrometer and hardness test, respectively, the
results show that some voids and cracks existed on the contact surface
as well as subsurface. Further examination verified inadequate
hardness and inclusions were responsible for the failure of surface
spalling.
Abstract: Owning to the high-speed feed rate and ultra spindle
speed have been used in modern machine tools, the tool-path
generation plays a key role in the successful application of a
High-Speed Machining (HSM) system. Because of its importance in
both high-speed machining and tool-path generation, approximating a
contour by NURBS format is a potential function in CAD/CAM/CNC
systems. It is much more convenient to represent an ellipse by
parametric form than to connect points laboriously determined in a
CNC system. A new approximating method based on optimum
processes and NURBS curves of any degree to the ellipses is presented
in this study. Such operations can be the foundation of tool-radius
compensation interpolator of NURBS curves in CNC system. All
operating processes for a CAD tool is presented and demonstrated by
practical models.
Abstract: Determining reasonable fees is the main objective of designing the cost estimation and payment systems for consultant contracts. However, project clients utilize different cost estimation and payment systems because of their varying views on the reasonableness of consultant fees. This study reviews the cost estimation and payment systems of consultant contracts for five countries, including the US (Washington State Department of Transportation), Japan (Ministry of Land, Infrastructure, Transport and Tourism), China (Engineering Design Charging Standard) and UK (Her Majesty's Treasure). Specifically, this work investigates the budgeting process, contractor selection method, contractual price negotiation process, cost review, and cost-control concept of the systems used in these countries. The main finding indicates that that project client-s view on whether the fee is high will affect the way he controls it. In the US, the fee is commonly considered to be high. As a result, stringent auditing system (low flexibility given to the consultant) is then applied. In the UK, the fee is viewed to be low by comparing it to the total life-cycle project cost. Thus, a system that has high flexibility in budgeting and cost reviewing is given to the consultant. In terms of the flexibility allowed for the consultant, the systems applied in Japan and China fall between those of the US and UK. Both the US and UK systems are helpful in determining a reasonable fee. However, in the US system, rigid auditing standards must be established and additional cost-audit manpower is required. In the UK system, sufficient historical cost data should be needed to evaluate the reasonableness of the consultant-s proposed fee
Abstract: In recent years, real estate prediction or valuation has
been a topic of discussion in many developed countries. Improper
hype created by investors leads to fluctuating prices of real estate,
affecting many consumers to purchase their own homes. Therefore,
scholars from various countries have conducted research in real estate
valuation and prediction. With the back-propagation neural network
that has been popular in recent years and the orthogonal array in the
Taguchi method, this study aimed to find the optimal parameter
combination at different levels of orthogonal array after the system
presented different parameter combinations, so that the artificial
neural network obtained the most accurate results. The experimental
results also demonstrated that the method presented in the study had a
better result than traditional machine learning. Finally, it also showed
that the model proposed in this study had the optimal predictive effect,
and could significantly reduce the cost of time in simulation operation.
The best predictive results could be found with a fewer number of
experiments more efficiently. Thus users could predict a real estate
transaction price that is not far from the current actual prices.
Abstract: Generation of electricity from coal has increased over
the years in the United States and around the world. Burning of coal
results in annual production of upwards of 100 millions tons (United
States only) of coal combustion products (CCPs). Only about a third
of these products are being used to create new products while the
remainder goes to landfills. Application of CCPs mixed with
composted organic materials onto soil can improve the soil-s
physico-chemical conditions and provide essential plant nutritients.
Our objective was to create plant growth media utilizing CCPs and
compost in way which maximizes the use of these products and, at
the same time, maintain good plant growth. Media were formulated
by adding composted organic matter (COM) to CCPs at ratios
ranging from 2:8 to 8:2 (v/v). The quality of these media was
evaluated by measuring their physical and chemical properties and
their effect on plant growth. We tested the media by 1) measuring
their physical and chemical properties and 2) the growth of three
plant species in the experimental media: wheat (Triticum sativum),
tomato (Lycopersicum esculentum) and marigold (Tagetes patula).
We achieved significantly (p < 0.001) higher growth (7-130%) in the
experimental media containing CCPs compared to a commercial mix.
The experimental media supplied adequate plant nutrition as no
fertilization was provided during the experiment. Based on the
results, we recommend the use of CCPs and composts for the
creation of plant growth media.
Abstract: For evaluating the severity of Chronic Obstructive Pulmonary Disease (COPD), one is interested in inspecting the airway wall thickening due to inflammation. Although airway segmentations have being well developed to reconstruct in high order, airway wall segmentation remains a challenge task. While tackling such problem as a multi-surface segmentation, the interrelation within surfaces needs to be considered. We propose a new method for three-dimensional airway wall segmentation using spring structural active contour model. The method incorporates the gravitational field of the image and repelling force field of the inner lumen as the soft constraint and the geometric spring structure of active contour as the hard constraint to approximate a three-dimensional coupled surface readily for thickness measurements. The results show the preservation of topology constraints of coupled surfaces. In conclusion, our springy, soft-tissue-like structure ensures the globally optimal solution and waives the shortness following by the inevitable improper inner surface constraint.
Abstract: In this research, the flow pattern influence on
performance of a micro PEMFC was investigated
experimentally. The investigation focused on the impacts of
bend angels and rib/channel dimensions of serpentine flow
channel pattern on the performance and investigated how they
improve the performance. The fuel cell employed for these
experiments was a micro single PEMFC with a membrane of
1.44 cm2 Nafion NRE-212. The results show that 60° and 120°
bend angles can provide the better performances at 20 and 40
sccm inlet flow rates comparing to that the conventional design.
Additionally, wider channel with narrower rib spacing gives
better performance. These results may be applied to develop
universal heuristics for the design of flow pattern of micro
PEMFC.
Abstract: In this paper, a two-channel secure communication
using fractional chaotic systems is presented. Conditions for chaos
synchronization have been investigated theoretically by using Laplace
transform. To illustrate the effectiveness of the proposed scheme, a
numerical example is presented. The keys, key space, key selection
rules and sensitivity to keys are discussed in detail. Results show that
the original plaintexts have been well masked in the ciphertexts yet
recovered faithfully and efficiently by the present schemes.
Abstract: Plasma plume will be produced and arrive at spacecraft when the electric thruster operates on orbit. It-s important to characterize the thruster plasma parameters because the plume has significant effects or hazards on spacecraft sub-systems and parts. Through the ground test data of the desired parameters, the major characteristics of the thruster plume will be achieved. Also it is very important for optimizing design of Ion thruster. Retarding Potential Analyzer (RPA) is an effective instrument for plasma ion energy per unit charge distribution measurement. Special RPA should be designed according to certain plume plasma parameters range and feature. In this paper, major principles usable for good RPA design are discussed carefully. Conform to these principles, a four-grid planar electrostatic energy analyzer RPA was designed to avoid false data, and details were discussed including construction, materials, aperture diameter and so on. At the same time, it was designed more suitable for credible and long-duration measurements in the laboratory. In the end, RPA measurement results in the laboratory were given and discussed.
Abstract: This paper proposes rough set models with three
different level knowledge granules in incomplete information system
under tolerance relation by similarity between objects according to
their attribute values. Through introducing dominance relation on the
discourse to decompose similarity classes into three subclasses: little
better subclass, little worse subclass and vague subclass, it dismantles
lower and upper approximations into three components. By using
these components, retrieving information to find naturally hierarchical
expansions to queries and constructing answers to elaborative queries
can be effective. It illustrates the approach in applying rough set
models in the design of information retrieval system to access different
granular expanded documents. The proposed method enhances rough
set model application in the flexibility of expansions and elaborative
queries in information retrieval.
Abstract: Process improvements have drawn much attention in
practical software engineering. The capability maturity levels from
CMMI have become an important index to assess a software company-s
software engineering capability. However, in countries like
Taiwan, customers often have no choices but to deal with vendors that
are not CMMI prepared or qualified. We call these vendors maturitylevel-
1 (ML1) vendors. In this paper, we describe our experience
from consulting an e-school project. We propose an approach to help
our client tackle the ML1 vendors. Through our system analysis, we
produce a design. This design is suggested to be used as part of
contract and a blueprint to guide the implementation.
Abstract: The network of delivering commodities has been an important design problem in our daily lives and many transportation applications. The delivery performance is evaluated based on the system reliability of delivering commodities from a source node to a sink node in the network. The system reliability is thus maximized to find the optimal routing. However, the design problem is not simple because (1) each path segment has randomly distributed attributes; (2) there are multiple commodities that consume various path capacities; (3) the optimal routing must successfully complete the delivery process within the allowable time constraints. In this paper, we want to focus on the design optimization of the Multi-State Flow Network (MSFN) for multiple commodities. We propose an efficient approach to evaluate the system reliability in the MSFN with respect to randomly distributed path attributes and find the optimal routing subject to the allowable time constraints. The delivery rates, also known as delivery currents, of the path segments are evaluated and the minimal-current arcs are eliminated to reduce the complexity of the MSFN. Accordingly, the correct optimal routing is found and the worst-case reliability is evaluated. It has been shown that the reliability of the optimal routing is at least higher than worst-case measure. Two benchmark examples are utilized to demonstrate the proposed method. The comparisons between the original and the reduced networks show that the proposed method is very efficient.
Abstract: This study experimentally investigates the heat transfer effects of forced convection and natural convection under different substrate openings design. A computational fluid dynamics (CFD) model was established and implemented to verify and explain the experimental results and heat transfer behavior. It is found that different opening position will destroy the growth of the boundary layer on substrates to alter the cooling ability for both forced under low Reynolds number and natural convection. Nevertheless, having too many opening may reduce heat conduction and affect the overall heat transfer performance. This study provides future researchers with a guideline on designing and electronic package manufacturing.
Abstract: This research is to explore the satisfaction for senior
citizens on continuing education in Taiwan. The purpose of this
research aims at the difference on teacher-s teaching, personal
relationship, learning result, materials and environment. Through
different sexual and living area as the background variables, a
questionnaire is adopted as the methodology in this research. Three
results are found in this research. In overall, senior citizens taking
continuing education put the most important attention on personal
relationship but materials and leaning environment put the least. There
is a significant difference on personal relationship, teacher-s teaching
and research result between different sexes. Female senior citizens
attach more importance to teacher-s teaching and learning results but
male senior citizens value on personal relationship. Another
significant difference is shown on teacher-s teaching and personal
relationship because of senior citizens living area. Urban senior
citizens put importance on personal relationship and rural senior
citizens respect teacher-s teaching more.
Abstract: In recent years, though, the concept of fit has been
now in widespread used in strategic management research, it is in its
infancy for applying fit concept to service innovation issue. Therefore,
drawing on the concept of fit, this present research proposed an
innovation service fit model within service innovation, market
orientation, marketing strategy, and IT adoption are coexisted. The
perspective of fit as covariation will be employed to test the hypothesis
and identify the effects of fit. We contend that the fit among these four
factors will contribution to business performance. Finally, according
to the empirical data collected from manufacturing, service, and
financial industry in Taiwan, meaningful findings and conclusions
will be proposed and discussed.
Abstract: Let G be a finite group, and let F be a formation of
finite group. We say that a subgroup H of G is p F -normal in G if
there exists a normal subgroup T of G such that HT is a permutable
Hall subgroup of G and G G (H
Abstract: The increasing importance of FlexRay systems in
automotive domain inspires unceasingly relative researches. One
primary issue among researches is to verify the reliability of FlexRay
systems either from protocol aspect or from system design aspect.
However, research rarely discusses the effect of network topology on
the system reliability. In this paper, we will illustrate how to model
the reliability of FlexRay systems with various network topologies by
a well-known probabilistic reasoning technology, Bayesian Network.
In this illustration, we especially investigate the effectiveness of error
containment built in star topology and fault-tolerant midpoint
synchronization algorithm adopted in FlexRay communication
protocol. Through a FlexRay steer-by-wire case study, the influence
of different topologies on the failure probability of the FlexRay steerby-
wire system is demonstrated. The notable value of this research is
to show that the Bayesian Network inference is a powerful and
feasible method for the reliability assessment of FlexRay systems.
Abstract: The purpose of this paper is to explore the role of
cognitive decision effort in recommendation system, combined with
indicators "information quality" and "service quality" from IS success
model to exam the awareness of the user for the "recommended system
performance". A total of 411 internet user answered a questionnaire
assessing their attention of use and satisfaction of recommendation
system in internet book store. Quantitative result indicates following
research results. First, information quality of recommended system
has obvious influence in consumer shopping decision-making process,
and the attitude to use the system. Second, in the process of consumer's
shopping decision-making, the recommendation system has no
significant influence for consumers to pay lower cognitive
decision-making effort. Third, e-commerce platform provides
recommendations and information is necessary, but the quality of
information on user needs must be considered, or they will be other
competitors offer homogeneous services replaced.