Abstract: The paper describes a knowledge based system for
analysis of microscopic wear particles. Wear particles contained in
lubricating oil carry important information concerning machine
condition, in particular the state of wear. Experts (Tribologists) in the
field extract this information to monitor the operation of the machine
and ensure safety, efficiency, quality, productivity, and economy of
operation. This procedure is not always objective and it can also be
expensive. The aim is to classify these particles according to their
morphological attributes of size, shape, edge detail, thickness ratio,
color, and texture, and by using this classification thereby predict
wear failure modes in engines and other machinery. The attribute
knowledge links human expertise to the devised Knowledge Based
Wear Particle Analysis System (KBWPAS). The system provides an
automated and systematic approach to wear particle identification
which is linked directly to wear processes and modes that occur in
machinery. This brings consistency in wear judgment prediction
which leads to standardization and also less dependence on
Tribologists.
Abstract: Deep Brain Stimulation or DBS is a surgical treatment for Parkinson-s Disease with three stimulation parameters: frequency, pulse width, and voltage. The parameters should be selected appropriately to achieve effective treatment. This selection now, performs clinically. The aim of this research is to study chaotic behavior of recorded tremor of patients under DBS in order to present a computational method to recognize stimulation optimum voltage. We obtained some chaotic features of tremor signal, and discovered embedding space of it has an attractor, and its largest Lyapunov exponent is positive, which show tremor signal has chaotic behavior, also we found out, in optimal voltage, entropy and embedding space variance of tremor signal have minimum values in comparison with other voltages. These differences can help neurologists recognize optimal voltage numerically, which leads to reduce patients' role and discomfort in optimizing stimulation parameters and to do treatment with high accuracy.
Abstract: This paper presents an efficient approach to feeder
reconfiguration for power loss reduction and voltage profile
imprvement in unbalanced radial distribution systems (URDS). In
this paper Genetic Algorithm (GA) is used to obtain solution for
reconfiguration of radial distribution systems to minimize the losses.
A forward and backward algorithm is used to calculate load flows in
unbalanced distribution systems. By simulating the survival of the
fittest among the strings, the optimum string is searched by
randomized information exchange between strings by performing
crossover and mutation. Results have shown that proposed algorithm
has advantages over previous algorithms The proposed method is
effectively tested on 19 node and 25 node unbalanced radial
distribution systems.
Abstract: In this paper, we proposed an invention of an
accessory into a communication device that will help humans to be
connected universally. Generally, this device will be made up of
crystal and will combine many technologies that will enable the user
to run various applications and software anywhere and everywhere.
Bringing up the concept of from being user friendly, we had used the
crystal as the main material of the device that will trap the
surrounding lights to produce projection of its screen. This leads to a
lesser energy consumption and allows smaller sized battery to be
used, making the device less bulky. Additionally, we proposed the
usage of micro batteries as our energy source. Thus, researches
regarding crystal were made along with explanations in details of
specification and function of the technology used in the device.
Finally, we had also drawn several views of the invention from
different sides to be visualized.
Abstract: Adaptive e-learning today gives the student a central
role in his own learning process. It allows learners to try things out,
participate in courses like never before, and get more out of learning
than before. In this paper, an adaptive e-learning model for logic
design, simplification of Boolean functions and related fields is
presented. Such model presents suitable courses for each student in a
dynamic and adaptive manner using existing database and workflow
technologies. The main objective of this research work is to provide
an adaptive e-learning model based learners' personality using
explicit and implicit feedback. To recognize the learner-s, we develop
dimensions to decide each individual learning style in order to
accommodate different abilities of the users and to develop vital
skills. Thus, the proposed model becomes more powerful, user
friendly and easy to use and interpret. Finally, it suggests a learning
strategy and appropriate electronic media that match the learner-s
preference.
Abstract: Supplement use is common in athletes. Besides their cost, they may have side effects on health and performance. 250 questionnaires were distributed among female athletes (mean age 27.08 years). The questionnaire aimed to explore the frequency, type, believes, attitudes and knowledge regarding dietary supplements. Knowledge was good in 30.3%, fair in 60.2%, and poor in 9.1% of respondents. 65.3% of athletes did not use supplements regularly. The most widely used supplements were vitamins (48.4%), minerals (42.9%), energy supplements (21.3%), and herbals (20.9%). 68.9% of athletes believed in their efficacy. 34.4% experienced performance enhancement and 6.8% of reported side effects. 68.2% reported little knowledge and 60.9% were eager to learn more. In conclusion, many of the female athletes believe in the efficacy of supplements and think they are an unavoidable part of competitive sports. However, their information is not sufficient. We have to stress on education, consulting sessions, and rational prescription.
Abstract: Strain M was isolated from the latex of Hevea brasiliensis that grow in the rubber farm area of Malaysia Rubber Board. Strain M was tentatively identified as Bacillus sp. Strain M demonstrated high protease production at pH 9, and this was suitable to be applied in rubber processing that was in alkaline conditions. The right and suitable proportion to be used in applying supernatant into the latex was two parts of latex and one part of enzyme. In this proportion, the latex was stable throughout the 72 hours of treatment. The potential of strain M to degrade protein in the natural rubber latex was proven with the reduction of 79.3% nitrogen in 24 hours treatment. Centrifugation process of the latex before undergoing the treatment had increased the protein degradation in latex. Although the centrifugation process did not achieve zero nitrogen content, it had improved the performance of protein denaturing in the natural rubber.
Abstract: The study of cytokine expression in mice under the
influence of inactivated poliovirus and Imovaks polio vaccine in
combination with derivatives of chitosan shows various kinds of
processes. There is a significant increase in IL-12 in the serum of
immunized animals, which should stimulate the production of IFN-γ
NK-cells and T-cells and polarize the immune response to Th1 type.
Thus, the derivatives of chitosan can promote cell component of the
immune response, providing a full antiviral immunity.
Abstract: Microaneurysm is a key indicator of diabetic retinopathy that can potentially cause damage to retina. Early detection and automatic quantification are the keys to prevent further damage. In this paper, which focuses on automatic microaneurysm detection in images acquired through non-dilated pupils, we present a series of experiments on feature selection and automatic microaneurysm pixel classification. We found that the best feature set is a combination of 10 features: the pixel-s intensity of shade corrected image, the pixel hue, the standard deviation of shade corrected image, DoG4, the area of the candidate MA, the perimeter of the candidate MA, the eccentricity of the candidate MA, the circularity of the candidate MA, the mean intensity of the candidate MA on shade corrected image and the ratio of the major axis length and minor length of the candidate MA. The overall sensitivity, specificity, precision, and accuracy are 84.82%, 99.99%, 89.01%, and 99.99%, respectively.
Abstract: Adenylate kinase (AK) catalyse the phosphotransferase
reaction plays an important role in cellular energy homeostasis. The
inhibitors of bacterial AK are useful in the treatment of several
bacterial infections. To the novel inhibitors of AK, docking studies
performed by using the 3D structure of Bacillus stearothermophilus
adenylate kinase from protein data bank (IZIP). 46 Quinoxaline
analogues were docked in 1ZIP and selected the highly interacting
compounds based on their binding energies, for further studies
Abstract: The objective of this study was to investigate the effects of dietary supplementation with raw or heat-treated sunflower oil seed with two levels of 7.5% or 15% on unsaturated fatty acids in milk fat and performances of high-yielding lactating cows. Twenty early lactating Holstein cows were used in a complete randomized design. Treatments included: 1) CON, control (without sunflower oil seed). 2) LS-UT, 7.5% raw sunflower oil seed. 3) LS-HT, 7.5% heat-treated sunflower oil seed. 4) HS-UT, 15% raw sunflower oil seed. 5) HS-HT, 15% heat-treated sunflower oil seed. Experimental period lasted for 4 wk, with first 2 wk used for adaptation to the diets. Supplementation with 7.5% raw sunflower seed (LS-UT) tended to decrease milk yield, with 28.37 kg/d compared with the control (34.75 kg/d). Milk fat percentage was increased with the HS-UT treatment that obtained 3.71% compared with CON that was 3.39% and without significant different. Milk protein percent was decreased high level sunflower oil seed treatments (15%) with 3.18% whereas CON treatment is caused 3.40% protein. The cows fed added low sunflower heat-treated (LS-HT) produced milk with the highest content of total unsaturated fatty acid with 32.59 g/100g of milk fat compared with the HS-UT with 23.59 g/100g of milk fat. Content of C18 unsaturated fatty acids in milk fat increased from 21.68 g/100g of fat in the HS-UT to 22.50, 23.98, 27.39 and 30.30 g/100g of fat from the cow fed HS-HT, CON, LS-UT and LS-HT treatments, respectively. C18:2 isomers of fatty acid in milk were greater by LSHT supplementation with significant effect (P < 0.05). Total of C18 unsaturated fatty acids content was significantly higher in milk of animal fed added low heat-treated sunflower (7.5%) than those fed with high sunflower. In all, results of this study showed that diet cow's supplementation with sunflower oil seed tended to reduce milk production of lactating cows but can improve C18 UFA (Unsaturated Fatty Acid) content in milk fat. 7.5% level of sunflower oil seed that heated seemed to be the optimal source to increase UFA production.
Abstract: Quality control in ceramic tile manufacturing is hard, labor intensive and it is performed in a harsh industrial environment with noise, extreme temperature and humidity. It can be divided into color analysis, dimension verification, and surface defect detection, which is the main purpose of our work. Defects detection is still based on the judgment of human operators while most of the other manufacturing activities are automated so, our work is a quality control enhancement by integrating a visual control stage using image processing and morphological operation techniques before the packing operation to improve the homogeneity of batches received by final users.
Abstract: The present study describes the biosynthesis of a milkclotting
protease by solid state fermentation (SSF) of a locally
isolated mould, Rhizopus stolonifer. The production medium was
prepared using wheat bran at 50% (w/v). The production conditions
are optimized by varying 7 parameters: carbon and nitrogen sources,
medium moisture, temperature, pH, fermentation time and
inoculum-s size. The maximum enzyme synthesis was measured after
96 h of incubation time at temperature of 28°C. The optimum pH
determined was 6 and the inoculum size was 3.106spores/ml. The
optimum initial moisture content is comprised between 50 to 70%.
The formation of milk clotting protease is enhanced when galactose
and peptone are used at 10% (w/v) and 1% (w/v) concentrations
respectively. The maximum production of milk clotting protease is
120 US/ml.
Abstract: A new approach has been used for optimized design of multipliers based upon the concepts of Vedic mathematics. The design has been targeted to state-of-the art field-programmable gate arrays (FPGAs). The multiplier generates partial products using Vedic mathematics method by employing basic 4x4 multipliers designed by exploiting 6-input LUTs and multiplexers in the same slices resulting in drastic reduction in area. The multiplier is realized on Xilinx FPGAs using devices Virtex-5 and Virtex-6.Carry Chain Adder was employed to obtain final products. The performance of the proposed multiplier was examined and compared to well-known multipliers such as Booth, Carry Save, Carry ripple, and array multipliers. It is demonstrated that the proposed multiplier is superior in terms of speed as well as power consumption.
Abstract: Optimal supplementary damping controller design for Thyristor Controlled Series Compensator (TCSC) is presented in this paper. For the proposed controller design, a multi-objective fitness function consisting of both damping factors and real part of system electromachanical eigenvalue is used and Real- Coded Genetic Algorithm (RCGA) is employed for the optimal supplementary controller parameters. The performance of the designed supplementary TCSC-based damping controller is tested on a weakly connected power system with different disturbances and loading conditions with parameter variations. Simulation results are presented and compared with a conventional power system stabilizer and also with the TCSC-based supplementary controller when the controller parameters are not optimized to show the effectiveness and robustness of the proposed approach over a wide range of loading conditions and disturbances.
Abstract: The need for Information Security in organizations, regardless of their type and size, is being addressed by emerging standards and recommended best practices. The various standards and practices which evolved in recent years and are still being developed and constantly revised, address the issue of Information Security from different angles. This paper attempts to provide an overview of Information Security Standards and Practices by briefly discussing some of the most popular ones. Through a comparative study of their similarities and differences, some insight can be obtained on how their combination may lead to an increased level of Information Security.
Abstract: The last two decades witnessed some advances in the development of an Arabic character recognition (CR) system. Arabic CR faces technical problems not encountered in any other language that make Arabic CR systems achieve relatively low accuracy and retards establishing them as market products. We propose the basic stages towards a system that attacks the problem of recognizing online Arabic cursive handwriting. Rule-based methods are used to perform simultaneous segmentation and recognition of word portions in an unconstrained cursively handwritten document using dynamic programming. The output of these stages is in the form of a ranked list of the possible decisions. A new technique for text line separation is also used.
Abstract: The effect of small non-parallelism of the base flow
on the stability of slightly curved mixing layers is analyzed in the
present paper. Assuming that the instability wavelength is much
smaller than the length scale of the variation of the base flow we
derive an amplitude evolution equation using the method of multiple
scales. The proposed asymptotic model provides connection between
parallel flow approximations and takes into account slow
longitudinal variation of the base flow.
Abstract: This paper presents a new algorithm which yields a nonlinear state estimator called iterated unscented Kalman filter. This state estimator makes use of both statistical and analytical linearization techniques in different parts of the filtering process. It outperforms the other three nonlinear state estimators: unscented Kalman filter (UKF), extended Kalman filter (EKF) and iterated extended Kalman filter (IEKF) when there is severe nonlinearity in system equation and less nonlinearity in measurement equation. The algorithm performance has been verified by illustrating some simulation results.
Abstract: High-velocity oxygen fuel (HVOF) thermal spraying
uses a combustion process to heat the gas flow and coating material.
A computational fluid dynamics (CFD) model has been developed to
predict gas dynamic behavior in a HVOF thermal spray gun in which
premixed oxygen and propane are burnt in a combustion chamber
linked to a parallel-sided nozzle. The CFD analysis is applied to
investigate axisymmetric, steady-state, turbulent, compressible,
chemically reacting, subsonic and supersonic flow inside and outside
the gun. The gas velocity, temperature, pressure and Mach number
distributions are presented for various locations inside and outside
the gun. The calculated results show that the most sensitive
parameters affecting the process are fuel-to-oxygen gas ratio and
total gas flow rate. Gas dynamic behavior along the centerline of the
gun depends on both total gas flow rate and fuel-to-oxygen gas ratio.
The numerical simulations show that the axial gas velocity and Mach
number distribution depend on both flow rate and ratio; the highest
velocity is achieved at the higher flow rate and most fuel-rich ratio.
In addition, the results reported in this paper illustrate that the
numerical simulation can be one of the most powerful and beneficial
tools for the HVOF system design, optimization and performance
analysis.