Abstract: Software crisis refers to the situation in which the developers are not able to complete the projects within time and budget constraints and moreover these overscheduled and over budget projects are of low quality as well. Several methodologies have been adopted form time to time to overcome this situation and now in the focus is component based software engineering. In this approach, emphasis is on reuse of already existing software artifacts. But the results can not be achieved just by preaching the principles; they need to be practiced as well. This paper highlights some of the very basic elements of this approach, which has to be in place to get the desired goals of high quality, low cost with shorter time-to-market software products.
Abstract: The need of high frame-rate imaging has been triggered by the new applications of ultrasound imaging to transient elastography and real-time 3D ultrasound. Using plane wave excitation (PWE) is one of the methods to achieve very high frame-rate imaging since an image can be formed with a single insonification. However, due to the lack of transmit focusing, the image quality with PWE is lower compared with those using conventional focused transmission. To solve this problem, we propose a filter-retrieved transmit focusing (FRF) technique combined with cross-correlation weighting (FRF+CC weighting) for high frame-rate imaging with PWE. A restrospective focusing filter is designed to simultaneously minimize the predefined sidelobe energy associated with single PWE and the filter energy related to the signal-to-noise-ratio (SNR). This filter attempts to maintain the mainlobe signals and to reduce the sidelobe ones, which gives similar mainlobe signals and different sidelobes between the original PWE and the FRF baseband data. Normalized cross-correlation coefficient at zero lag is calculated to quantify the degree of similarity at each imaging point and used as a weighting matrix to the FRF baseband data to further suppress sidelobes, thus improving the filter-retrieved focusing quality.
Abstract: This paper focuses on the use of project work as a
pretext for applying the conventions of writing, or the correctness of
mechanics, usage, and sentence formation, in a content-based class in
a Rajabhat University. Its aim was to explore to what extent the
student teachers’ academic achievement of the basic writing features
against the 70% attainment target after the use of project is. The
organization of work around an agreed theme in which the students
reproduce language provided by texts and instructors is expected to
enhance students’ correct writing conventions. The sample of the
study comprised of 38 fourth-year English major students. The data
was collected by means of achievement test and student writing
works. The scores in the summative achievement test were analyzed
by mean score, standard deviation, and percentage. It was found that
the student teachers do more achieve of practicing mechanics and
usage, and less in sentence formation. The students benefited from
the exposure to texts during conducting the project; however, their
automaticity of how and when to form phrases and clauses into
simple/complex sentences had room for improvement.
Abstract: Cyprus- offshore aquaculture industry has promising
prospects taking into account that Cyprus is an island. Its production
trend is increasing overtaking bigger countries such Greece and Italy.
However, current mooring systems seem to be under-performing
acting as obstacles for its future development. Furthermore, shallow
coastal waters scarcity due to competing industries dictates future
development to come by moving further from shore exposing fish
farms and subsequently mooring systems to harsher environmental
loadings. It is, therefore, of paramount importance to design mooring
systems based on engineering and scientific principles and leave
behind the present “trial and error" methods. This paper presents the
current state of Cyprus- offshore aquaculture industry and focuses of
its mooring designs by proposing a new methodology for designing
more reliable systems, hence ensuring its future.
Abstract: Needs of an efficient information retrieval in recent
years in increased more then ever because of the frequent use of
digital information in our life. We see a lot of work in the area of
textual information but in multimedia information, we cannot find
much progress. In text based information, new technology of data
mining and data marts are now in working that were started from the
basic concept of database some where in 1960.
In image search and especially in image identification,
computerized system at very initial stages. Even in the area of image
search we cannot see much progress as in the case of text based
search techniques. One main reason for this is the wide spread roots
of image search where many area like artificial intelligence,
statistics, image processing, pattern recognition play their role. Even
human psychology and perception and cultural diversity also have
their share for the design of a good and efficient image recognition
and retrieval system.
A new object based search technique is presented in this paper
where object in the image are identified on the basis of their
geometrical shapes and other features like color and texture where
object-co-relation augments this search process.
To be more focused on objects identification, simple images are
selected for the work to reduce the role of segmentation in overall
process however same technique can also be applied for other
images.
Abstract: We assert here that there might be some factors that
influence professional identity construction at the university/higher
education stage. In accord, we propose a conceptual framework of
intervening factors in professional identity construction at university
from a literature review and preliminary data from a qualitative pilot
study using focus groups. This model identifies several factors that
might influence university students- professional identity
construction and group them into categories. In turn, we describe
how these factors might contribute in strengthening or weakening
their professional identity. Finally, we discuss the implications of
strengthening students- PI for the university, individuals and
organizations and we provide a roadmap for future empirical work in
this area.
Abstract: The aim of this study is to compare the innovativeness, risk taking, and focusing on opportunity of the nurse managers and nurses. The data are collected from nurse managers and nurses in Ondokuz Mayıs University, Faculty of Medicine Hospital and Karadeniz Technical University, Faculty of Medicine Hospital. The study sample consisted of 151 participants, 76 nurse managers (50.3%) and 75 nurses (49.7%). All participants have been assessed by Participant Information Form and Corporate Entrepreneurship Scale. In data analysis, independent t-test has applied. The results show that there are significant differences between nurse managers and nurses on innovativeness (t = 2.42, p < 0.05), risk taking (t = 3.62, p < 0.01), and focusing on opportunity (t = 2.16, p < 0.05). Consequently, it can be said that nurse managers have more innovativeness than nurses and tend to take more risks and focus more on opportunities.
Abstract: In textile industry, besides the conventional textile
products, technical textile goods, that have been brought external
functional properties into, are being developed for technical textile
industry. Especially these products produced with weaving
technology are widely preferred in areas such as sports, geology,
medical, automotive, construction and marine sectors. These textile
products are exposed to various stresses and large deformations under
typical conditions of use. At this point, sufficient and reliable data
could not be obtained with uniaxial tensile tests for determination of
the mechanical properties of such products due to mainly biaxial
stress state. Therefore, the most preferred method is a biaxial tensile
test method and analysis. These tests and analysis is applied to fabrics
with different functional features in order to establish the textile
material with several characteristics and mechanical properties of the
product. Planar biaxial tensile test, cylindrical inflation and bulge
tests are generally required to apply for textile products that are used
in automotive, sailing and sports areas and construction industry to
minimize accidents as long as their service life. Airbags, seat belts
and car tires in the automotive sector are also subject to the same
biaxial stress states, and can be characterized by same types of
experiments. In this study, in accordance with the research literature
related to the various biaxial test methods are compared. Results with
discussions are elaborated mainly focusing on the design of a biaxial
test apparatus to obtain applicable experimental data for developing a
finite element model. Sample experimental results on a prototype
system are expressed.
Abstract: There have been many games developing simulation
of soccer games. Many of these games have been designed with
highly realistic features to attract more users. Many have also
incorporated better artificial intelligent (AI) similar to that in a real
soccer game. One of the challenging issues in a soccer game is the
cooperation, coordination and negotiation among distributed agents
in a multi-agent system. This paper focuses on the incorporation of
multi-agent technique in a soccer game domain. The better the
cooperation of a multi-agent team, the more intelligent the game will
be. Thus, past studies were done on the robotic soccer game because
of the better multi-agent system implementation. From this study, a
better approach and technique of multi-agent behavior could be
select to improve the author-s 2D online soccer game.
Abstract: The purpose of this research study is to investigate the manner in which various loads affect the mechanical properties of the formed mild steel plates. The investigation focuses on examining the cross-sectional area of the metal plate at the centre of the formed mild steel plate. Six mild steel plates were deformed with different loads. The loads applied on the plates had a magnitude of 5 kg, 10 kg, 15 kg, 20 kg, 25 kg and 30 kg. The radius of the punching die was 120 mm and the loads were applied at room temperature. The investigations established that the applied load causes the Vickers microhardness at the cross-sectional area of the plate to increase due to strain hardening. Hence, the percentage increase of the hardness due to the load was found to be directly proportional to the increase in the load. Furthermore, the tensile test results for the parent material showed that the average Ultimate Tensile Strength (UTS) for the three samples was 308 MPa while the average Yield Strength and Percentage Elongation were 227 MPa and 38 % respectively. Similarly, the UTS of the formed components increased after the deformation of the plate, as such it can be concluded that the forming loads alter the mechanical properties of the materials by improving and strengthening the material properties.
Abstract: This paper discusses a qualitative simulator QRiOM
that uses Qualitative Reasoning (QR) technique, and a process-based
ontology to model, simulate and explain the behaviour of selected
organic reactions. Learning organic reactions requires the application
of domain knowledge at intuitive level, which is difficult to be
programmed using traditional approach. The main objective of
QRiOM is to help learners gain a better understanding of the
fundamental organic reaction concepts, and to improve their
conceptual comprehension on the subject by analyzing the multiple
forms of explanation generated by the software. This paper focuses
on the generation of explanation based on causal theories to explicate
various phenomena in the chemistry subject. QRiOM has been tested
with three classes problems related to organic chemistry, with
encouraging results. This paper also presents the results of
preliminary evaluation of QRiOM that reveal its explanation
capability and usefulness.
Abstract: The objective of the present research manuscript is to
perform parametric, nonparametric, and decision tree analysis to
evaluate two treatments that are being used for breast cancer patients.
Our study is based on utilizing real data which was initially used in
“Tamoxifen with or without breast irradiation in women of 50 years
of age or older with early breast cancer" [1], and the data is supplied
to us by N.A. Ibrahim “Decision tree for competing risks survival
probability in breast cancer study" [2]. We agree upon certain aspects
of our findings with the published results. However, in this
manuscript, we focus on relapse time of breast cancer patients instead
of survival time and parametric analysis instead of semi-parametric
decision tree analysis is applied to provide more precise
recommendations of effectiveness of the two treatments with respect
to reoccurrence of breast cancer.
Abstract: Implementing Information Technology/ Information
System (IT/IS) is critical for every industry as its potential benefits
have been to motivate many industries including the Malaysian
construction industry to invest in it. To successfully implement IT/IS
has become the major concern for every organisation. Identifying the
critical success factors (CSFs) has become the main agenda for
researchers, academicians and practitioners due to the wide number
of failures reported. This research paper seeks to identify the CSFs
that influence the successful implementation of IT/IS in construction
industry in Malaysia. Limited factors relating to people issue will be
highlighted here to showcase some as it becomes one of the major
contributing factors to the failure. Three (3) organisations have
participated in this study. Semi-structured interviews are employed as
they offer sufficient flexibility to ensure that all relevant factors are
covered. Several key issues contributing to successful
implementations of IT/IS are identified. The results of this study
reveal that top management support, communication, user
involvement, IT staff roles and responsibility, training/skills, leader/
IT Leader, organisation culture, knowledge/ experience, motivation,
awareness, focus and ambition, satisfaction, teamwork/ collaboration,
willingness to change, attitude, commitment, management style,
interest in IT, employee behaviour towards collaborative
environment, trust, interpersonal relationship, personal characteristic
and competencies are significantly associated with the successful
implementations of IT/IS. It is anticipated that this study will create
awareness and contribute to a better understanding amongst
construction industry players and will assist them to successfully
implement IT/IS.
Abstract: Circular tubes have been widely used as structural
members in engineering application. Therefore, its collapse behavior
has been studied for many decades, focusing on its energy absorption
characteristics. In order to predict the collapse behavior of members,
one could rely on the use of finite element codes or experiments.
These tools are helpful and high accuracy but costly and require
extensive running time. Therefore, an approximating model of tubes
collapse mechanism is an alternative for early step of design. This
paper is also aimed to develop a closed-form solution of thin-walled
circular tube subjected to bending. It has extended the Elchalakani et
al.-s model (Int. J. Mech. Sci.2002; 44:1117-1143) to include the
rate of energy dissipation of rolling hinge in the circumferential
direction. The 3-D geometrical collapse mechanism was analyzed by
adding the oblique hinge lines along the longitudinal tube within the
length of plastically deforming zone. The model was based on the
principal of energy rate conservation. Therefore, the rates of internal
energy dissipation were calculated for each hinge lines which are
defined in term of velocity field. Inextensional deformation and
perfect plastic material behavior was assumed in the derivation of
deformation energy rate. The analytical result was compared with
experimental result. The experiment was conducted with a number of
tubes having various D/t ratios. Good agreement between analytical
and experiment was achieved.
Abstract: This paper explores the use of project work in a
content-based instruction in a Rajabhat University, a teacher college,
where student teachers are instructed to perform teaching roles
mainly in basic education level. Its aim is to link theory to practice,
and to help language teachers maximize the full potential of project
work for genuine communication and give real meaning to writing
activity. Two research questions are formulated to guide this study:
a) What is the academic achievement of the students- writing skill
against the 70% attainment target after the use of project to enhance
the skill? and b) To what degree is the development of the students-
writing skills during the course of project to enhance the skill? The
sample of the study comprised of 38 fourth-year English major
students. The data was collected by means of achievement test,
student writing works, and project diary. The scores in the summative
achievement test were analyzed by mean score, standard deviation,
and t-test. Project diary serves as students- record of the language
acquired during the project. List of structures and vocabulary noted in
the diary has shown students- ability to attend to, recognize, and
focus on meaningful patterns of language forms.
Abstract: Nowadays, offshore's complicated facilities need their
own communications requirements. Nevertheless, developing and
real-world applications of new communications technology are faced
with tremendous problems for new technology users, developers and
implementers. Traditional systems engineering cannot be capable to
develop a new technology effectively because it does not consider
the dynamics of the process. This paper focuses on the design of a
holistic model that represents the dynamics of new communication
technology development within offshore industry. The model shows
the behavior of technology development efforts. Furthermore,
implementing this model, results in new and useful insights about the
policy option analysis for developing a new communications
technology in offshore industry.
Abstract: The use of Virtual Reality (VR) in schools and higher education is proliferating. Due to its interactive and animated features, it is regarded as a promising technology to increase students- spatial ability. Spatial ability is assumed to have a prominent role in science and engineering domains. However, research concerning individual differences such as spatial ability in the context of VR is still at its infancy. Moreover, empirical studies that focus on the features of VR to improve spatial ability are to date rare. Thus, this paper explores the possible educational values of VR in relation to spatial ability to call for more research concerning spatial ability in the context of VR based on studies in computerbased learning. It is believed that the incorporation of state-of-the-art VR technology for educational purposes should be justified by the enhanced benefits for the target learners.
Abstract: In this paper, we focus on the use of knowledge bases
in two different application areas – control of systems with unknown
or strongly nonlinear models (i.e. hardly controllable by the classical
methods), and robot motion planning in eight directions. The first
one deals with fuzzy logic and the paper presents approaches for
setting and aggregating the rules of a knowledge base. Te second one
is concentrated on a case-based reasoning strategy for finding the
path in a planar scene with obstacles.
Abstract: III-nitride quaternary InxAlyGa1-x-yN alloys have experienced considerable interest as potential materials for optoelectronic applications. Despite these interesting applications and the extensive efforts to understand their fundamental properties, research on its fundamental surface property, i.e., surface phonon polariton (SPP) has not yet been reported. In fact, the SPP properties have been shown to provide application for some photonic devices. Hence, there is an absolute need for thorough studies on the SPP properties of this material. In this work, theoretical study on the SPP modes in InAlGaN quaternary alloys are reported. Attention is focus on the wurtzite (α-) structure InxAlyGa1-x-yN semi-crystal with different In composition, x ranging from 0 to 0.10 and constant Al composition, y = 0.06. The SPP modes are obtained through the theoretical simulation by means of anisotropy model. The characteristics of SP dispersion curves are discussed. Accessible results in terms of the experimental point of view are also given. Finally, the results revealed that the SPP mode of α-InxAlyGa1-x-yN semiconductors exhibits two-mode behavior.
Abstract: The bridge vibration due to traffic loading has been a
subject of extensive research during the last decades. A number of
these studies are concerned with the effects of the unevenness of
roadways on the dynamic responses of highway bridges. The road
unevenness is often described as a random process that constitutes
of different wavelengths. Thus, the study focuses on examining
the effects of the random description of roadways on the dynamic
response and its variance. A new setting of variance based sensitivity
analysis is proposed and used to identify and quantify the
contributions of the roadway-s wavelengths to the variance of the
dynamic response. Furthermore, the effect of the vehicle-s speed on
the dynamic response is studied.