Abstract: This paper aims to develop a model that assists the
international retailer in selecting the country that maximizes the
degree of fit between the retailer-s goals and the country
characteristics in his initial internationalization move. A two-stage
multi criteria decision model is designed integrating the Analytic
Hierarchy Process (AHP) and Goal Programming. Ethical, cultural,
geographic and economic proximity are identified as the relevant
constructs of the internationalization decision. The constructs are
further structured into sub-factors within analytic hierarchy. The
model helps the retailer to integrate, rank and weigh a number of
hard and soft factors and prioritize the countries accordingly. The
model has been implemented on a Turkish luxury goods retailer who
was planning to internationalize. Actual entry of the specific retailer
in the selected country is a support for the model. Implementation on
a single retailer limits the generalizability of the results; however, the
emphasis of the paper is on construct identification and model
development. The paper enriches the existing literature by proposing
a hybrid multi objective decision model which introduces new soft
dimensions i.e. perceived distance, ethical proximity, humane
orientation to the decision process and facilitates effective decision
making.
Abstract: Different forms of interaction are an integral part of
modern courses. Traditional courses held on-campus might focus on
teacher-student interaction, or student-student interaction, or both.
However when these traditional on-campus courses are to be held as
distance courses there is a risk that these well-designed interactions
will be difficult or impossible to uphold. For example, studentstudent
interaction in traditional project assignments might not work
well if the students are scattered across the world. Thus, even a welldesigned
traditional on-site course cannot without modification be
turned into a distance course. Traditional on-site courses simply have
to be redesigned to become true distance courses. This paper
describes a structured approach which facilitates the redesign of a
traditional course into a distance course. The approach is based on
that the desired forms of course flexibility are identified, and
thereafter that the course activities are redesigned to facilitate
interaction in a distance course. The approach is making use of
known patterns of pedagogic interaction and existing guidelines for
distance education design. The approach is illustrated with an
example course in the field of information systems design.
Abstract: We report the size dependence of 1D superconductivity in ultrathin (10-130 nm) nanowires produced by coating suspended carbon nanotubes with a superconducting NbN thin film. The resistance-temperature characteristic curves for samples with ≧25 nm wire width show the superconducting transition. On the other hand, for the samples with 10-nm width, the superconducting transition is not exhibited owing to the quantum size effect. The differential resistance vs. current density characteristic curves show some peak, indicating that Josephson junctions are formed in nanowires. The presence of the Josephson junctions is well explained by the measurement of the magnetic field dependence of the critical current. These understanding allow for the further expansion of the potential application of NbN, which is utilized for single photon detectors and so on.
Abstract: In the present paper, we propose numerical methods for solving the Stein equation AXC - X - D = 0 where the matrix A is large and sparse. Such problems appear in discrete-time control problems, filtering and image restoration. We consider the case where the matrix D is of full rank and the case where D is factored as a product of two matrices. The proposed methods are Krylov subspace methods based on the block Arnoldi algorithm. We give theoretical results and we report some numerical experiments.
Abstract: In recent past, the Unified Modeling Language (UML) has become the de facto industry standard for object-oriented modeling of the software systems. The syntax and semantics rich UML has encouraged industry to develop several supporting tools including those capable of generating deployable product (code) from the UML models. As a consequence, ensuring the correctness of the model/design has become challenging and extremely important task. In this paper, we present an approach for automatic verification of protocol model/design. As a case study, Session Initiation Protocol (SIP) design is verified for the property, “the CALLER will not converse with the CALLEE before the connection is established between them ". The SIP is modeled using UML statechart diagrams and the desired properties are expressed in temporal logic. Our prototype verifier “UML-SMV" is used to carry out the verification. We subjected an erroneous SIP model to the UML-SMV, the verifier could successfully detect the error (in 76.26ms) and generate the error trace.
Abstract: One of the main research methods in humanistic studies is the collection and process of data through questionnaires. This paper reports our experiences of localizing and adapting the phpESP package of electronic surveys, which led to a friendly on-line questionnaire environment offered through our department web site. After presenting the characteristics of this environment, we identify the expected benefits and present a questionnaire carried out through both the traditional and electronic way. We present the respondents' feedback and then we report the researchers' opinions.Finally, we propose ideas we intend to implement in order to further assist and enhance the research based on this web accessed,electronic questionnaire environment.
Abstract: Minor problems arising from optimizations by
welding of fixed prostheses frameworks can be identified by
macroscopic and microscopic visual inspection. The purpose of this
study was to highlight the visible discontinuities present in the laser
welds of dental Ni-Cr alloys. Ni-Cr base metal alloys designated for
fixed prostheses manufacture were selected for the experiments.
Using cast plates, preliminary tests were conducted by laser welding.
Macroscopic visual inspection was done carefully to assess the
defects of the welding rib. Electron microscopy images allowed
visualization of small discontinuities, which escapes visual
inspection. Making comparison to Ni-Cr alloys taken in the
experiment and laser welded, after visual analysis, the best welds
appear for Heraenium NA alloy.
Abstract: This research attempts to study the feasibility of
augmenting an augmented reality (AR) image card on a Quick
Response (QR) code. The authors have developed a new visual tag,
which contains a QR code and an augmented AR image card. The new
visual tag has features of reading both of the revealed data of the QR
code and the instant data from the AR image card. Furthermore, a
handheld communicating device is used to read and decode the new
visual tag, and then the concealed data of the new visual tag can be
revealed and read through its visual display. In general, the QR code is
designed to store the corresponding data or, as a key, to access the
corresponding data from the server through internet. Those reveled
data from the QR code are represented in text. Normally, the AR
image card is designed to store the corresponding data in
3-Dimensional or animation/video forms. By using QR code's
property of high fault tolerant rate, the new visual tag can access those
two different types of data by using a handheld communicating device.
The new visual tag has an advantage of carrying much more data than
independent QR code or AR image card. The major findings of this
research are: 1) the most efficient area for the designed augmented AR
card augmenting on the QR code is 9% coverage area out of the total
new visual tag-s area, and 2) the best location for the augmented AR
image card augmenting on the QR code is located in the bottom-right
corner of the new visual tag.
Abstract: In this paper a fast motion estimation method for
H.264/AVC named Triplet Search Motion Estimation (TS-ME) is
proposed. Similar to some of the traditional fast motion estimation
methods and their improved proposals which restrict the search points
only to some selected candidates to decrease the computation
complexity, proposed algorithm separate the motion search process to
several steps but with some new features. First, proposed algorithm try
to search the real motion area using proposed triplet patterns instead of
some selected search points to avoid dropping into the local minimum.
Then, in the localized motion area a novel 3-step motion search
algorithm is performed. Proposed search patterns are categorized into
three rings on the basis of the distance from the search center. These
three rings are adaptively selected by referencing the surrounding
motion vectors to early terminate the motion search process. On the
other hand, computation reduction for sub pixel motion search is also
discussed considering the appearance probability of the sub pixel
motion vector. From the simulation results, motion estimation speed
improved by a factor of up to 38 when using proposed algorithm than
that of the reference software of H.264/AVC with ignorable picture
quality loss.
Abstract: The colors of the human skin represent a special
category of colors, because they are distinctive from the colors of
other natural objects. This category is found as a cluster in color
spaces, and the skin color variations between people are mostly due
to differences in the intensity. Besides, the face detection based on
skin color detection is a faster method as compared to other
techniques. In this work, we present a system to track faces by
carrying out skin color detection in four different color spaces: HSI,
YCbCr, YES and RGB. Once some skin color regions have been
detected for each color space, we label each and get some
characteristics such as size and position. We are supposing that a face
is located in one the detected regions. Next, we compare and employ
a polling strategy between labeled regions to determine the final
region where the face effectively has been detected and located.
Abstract: The optimal control problem of a linear distributed
parameter system is studied via shifted Legendre polynomials (SLPs)
in this paper. The partial differential equation, representing the
linear distributed parameter system, is decomposed into an n - set
of ordinary differential equations, the optimal control problem is
transformed into a two-point boundary value problem, and the twopoint
boundary value problem is reduced to an initial value problem
by using SLPs. A recursive algorithm for evaluating optimal control
input and output trajectory is developed. The proposed algorithm is
computationally simple. An illustrative example is given to show the
simplicity of the proposed approach.
Abstract: The aerodynamics characteristics of a blended-wing body (BWB) aircraft were obtained in Universiti Teknologi MARA low speed wind tunnel. The scaled-down of BWB model consisted of a canard as its horizontal stabilizer. There were four canards with different aspect ratio used in the experiments. Canard setting angles were varied from -20q to 20q. All tests were conducted at velocity of 35 m/s, with Mach number 0.1. At low angles of attacks, the increment of lift slope for various canards aspect ratio is small and almost constant. Higher canard aspect ratio will cause higher drag. However, canard has a high effect to the moment at zero lift, CM,0.The visualization using mini tuff was performed to observe the airflow at the upper surface of canard. KeywordsAerodynamics,blended-wing body, canard, wind tunnel.
Abstract: Carbon nanotubes (CNTs) possess unique structural,
mechanical, thermal and electronic properties, and have been
proposed to be used for applications in many fields. However, to
reach the full potential of the CNTs, many problems still need to be
solved, including the development of an easy and effective
purification procedure, since synthesized CNTs contain impurities,
such as amorphous carbon, carbon nanoparticles and metal particles.
Different purification methods yield different CNT characteristics
and may be suitable for the production of different types of CNTs. In
this study, the effect of different purification chemicals on carbon
nanotube quality was investigated. CNTs were firstly synthesized by
chemical vapor deposition (CVD) of acetylene (C2H2) on a
magnesium oxide (MgO) powder impregnated with an iron nitrate
(Fe(NO3)3·9H2O) solution. The synthesis parameters were selected
as: the synthesis temperature of 800°C, the iron content in the
precursor of 5% and the synthesis time of 30 min. The liquid phase
oxidation method was applied for the purification of the synthesized
CNT materials. Three different acid chemicals (HNO3, H2SO4, and
HCl) were used in the removal of the metal catalysts from the
synthesized CNT material to investigate the possible effects of each
acid solution to the purification step. Purification experiments were
carried out at two different temperatures (75 and 120 °C), two
different acid concentrations (3 and 6 M) and for three different time
intervals (6, 8 and 15 h). A 30% H2O2 : 3M HCl (1:1 v%) solution
was also used in the purification step to remove both the metal
catalysts and the amorphous carbon. The purifications using this
solution were performed at the temperature of 75°C for 8 hours.
Purification efficiencies at different conditions were evaluated by
thermogravimetric analysis. Thermal and electrical properties of
CNTs were also determined. It was found that the obtained electrical
conductivity values for the carbon nanotubes were typical for organic
semiconductor materials and thermal stabilities were changed
depending on the purification chemicals.
Abstract: The effects of ethylene (C2H4) feed position and
O2/C2H4 feed molar ratio on ethylene epoxidation in a parallel
dielectric barrier discharge (DBD) were studied. The results showed
that the ethylene feed position fraction of 0.5 and the feed molar
ratio of O2/C2H4 of 0.2:1 gave the highest EO selectivity of 34.3%
and the highest EO yield of 5.28% with low power consumptions of
2.11×10-16 Ws/molecule of ethylene converted and 6.34×10-16
Ws/molecule of EO produced when the DBD system was operated
under the best conditions: an applied voltage of 19 kV, an input
frequency of 500 Hz and a total feed flow rate of 50 cm3/min. The
separate ethylene feed system provided much higher epoxidation
activity as compared to the mixed feed system which gave EO
selectivity of 15.5%, EO yield of 2.1% and the power consumption of
EO produced of 7.7×10-16 Ws/molecule.
Abstract: Understanding of how and where NOx formation
occurs in industrial burner is very important for efficient and clean
operation of utility burners. Also the importance of this problem is
mainly due to its relation to the pollutants produced by more burners
used widely of gas turbine in thermal power plants and glass and steel
industry.
In this article, a numerical model of an industrial burner operating
in MILD combustion is validated with experimental data.. Then
influence of air flow rate and air temperature on combustor
temperature profiles and NOX product are investigated. In order to
modification this study reports on the effects of fuel and air dilution
(with inert gases H2O, CO2, N2), and also influence of lean-premixed
of fuel, on the temperature profiles and NOX emission.
Conservation equations of mass, momentum and energy, and
transport equations of species concentrations, turbulence, combustion
and radiation modeling in addition to NO modeling equations were
solved together to present temperature and NO distribution inside the
burner.
The results shows that dilution, cause to a reduction in value of
temperature and NOX emission, and suppresses any flame
propagation inside the furnace and made the flame inside the furnace
invisible. Dilution with H2O rather than N2 and CO2 decreases further
the value of the NOX. Also with raise of lean-premix level, local
temperature of burner and the value of NOX product are decreases
because of premixing prevents local “hot spots" within the combustor
volume that can lead to significant NOx formation. Also leanpremixing
of fuel with air cause to amount of air in reaction zone is
reach more than amount that supplied as is actually needed to burn
the fuel and this act lead to limiting NOx formation
Abstract: Physiological control of a left ventricle assist device (LVAD) is generally a complicated task due to diverse operating environments and patient variability. In this work, a tracking control algorithm based on sliding mode and feed forward control for a class of discrete-time single input single output (SISO) nonlinear uncertain systems is presented. The controller was developed to track the reference trajectory to a set operating point without inducing suction in the ventricle. The controller regulates the estimated mean pulsatile flow Qp and mean pulsatility index of pump rotational speed PIω that was generated from a model of the assist device. We recall the principle of the sliding mode control theory then we combine the feed-forward control design with the sliding mode control technique to follow the reference trajectory. The uncertainty is replaced by its upper and lower boundary. The controller was tested in a computer simulation covering two scenarios (preload and ventricular contractility). The simulation results prove the effectiveness and the robustness of the proposed controller
Abstract: Double-diffusive steady convection in a partially
porous cavity with partially permeable walls and under the combined
buoyancy effects of thermal and mass diffusion was analysed
numerically using finite volume method.
The top wall is well insulated and impermeable while the bottom
surface is partially well insulated and impermeable and partially
submitted to constant temperature T1 and concentration C1. Constant
equal temperature T2 and concentration C2 are imposed along the
vertical surfaces of the enclosure. Mass suction/injection and
injection/suction are respectively considered at the bottom of the
porous centred partition and at one of the vertical walls.
Heat and mass transfer characteristics as streamlines and average
Nusselt numbers and Sherwood numbers were discussed for different
values of buoyancy ratio, Rayleigh number, and injection/suction
coefficient.
It is especially noted that increasing the injection factor
disadvantages the exchanges in the case of the injection while the
transfer is augmented in case of suction. On the other hand, a critical
value of the buoyancy ratio was highlighted for which heat and mass
transfers are minimized.
Abstract: In order to study floristic and molecular classification
of common wild wheat (Triticum boeoticum Boiss.), an analysis was
conducted on populations of the Triticum boeoticum collected from
different regions of Iran. Considering all floristic compositions of
habitats, six floristic groups (syntaxa) within the populations were
identified. A high level of variation of T. boeoticum also detected
using SSR markers. Our results showed that molecular method
confirmed the grouping of floristic method. In other word, the results
from our study indicate that floristic classification are still useful,
efficient, and economic tools for characterizing the amount and
distribution of genetic variation in natural populations of T.
boeoticum. Nevertheless, molecular markers appear as useful and
complementary techniques for identification and for evaluation of
genetic diversity in studied populations.
Abstract: The main objective of seismic rehabilitation in the
foundations is decreasing the range of horizontal and vertical
vibrations and omitting high frequencies contents under the seismic
loading. In this regard, the advantages of micropiles network is
utilized. Reduction in vibration range of foundation can be achieved
by using high dynamic rigidness module such as deep foundations. In
addition, natural frequency of pile and soil system increases in regard
to rising of system rigidness. Accordingly, the main strategy is
decreasing of horizontal and vertical seismic vibrations of the
structure. In this case, considering the impact of foundation, pile and
improved soil foundation is a primary concern. Therefore, in this
paper, effective factors are studied on the seismic rehabilitation of
foundations applying network micropiles in sandy soils with
nonlinear reaction.
Abstract: In this paper, parallel interface for microprocessor
trainer was implemented. A programmable parallel–port device such
as the IC 8255A is initialized for simple input or output and for
handshake input or output by choosing kinds of modes. The hardware
connections and the programs can be used to interface
microprocessor trainer and a personal computer by using IC 8255A.
The assembly programs edited on PC-s editor can be downloaded to
the trainer.