Abstract: Parallel programming models exist as an abstraction
of hardware and memory architectures. There are several parallel
programming models in commonly use; they are shared memory
model, thread model, message passing model, data parallel model,
hybrid model, Flynn-s models, embarrassingly parallel computations
model, pipelined computations model. These models are not specific
to a particular type of machine or memory architecture. This paper
expresses the model program for concurrent approach to data parallel
model through java programming.
Abstract: The aluminum bronze matrix alumina composites using hot press and resin infiltration were investigated to study their porosities, hardness, bending strengths, and microstructures. The experiment results show that the hardness of the sintered composites with the decrease of porosity increases. The composites without and with resin infiltration have about HRF 42-61 of about 34-40% of porosity and about HRF 62-83 of about 30-36% of porosity, respectively. Besides, the alumina composites contain a more amount of iron and nickel powders would cause a lower bending strength due to forming some weaker bonding among the iron, nickel, copper, aluminum under this hot pressing of shorter time.
Abstract: This paper presents a compact thermoelectric power generator system based on temperature difference across the element. The system can transfer the burning heat energy to electric energy directly. The proposed system has a thermoelectric generator and a power control box. In the generator, there are 4 thermoelectric modules (TEMs), each of which uses 2 thermoelectric chips (TEs) and 2 cold sinks, 1 thermal absorber, and 1 thermal conduction flat board. In the power control box, there are 1 storing energy device, 1 converter, and 1 inverter. The total net generating power is about 11W. This system uses commercial portable gas stoves or burns timber or the coal as the heat source, which is easily obtained. It adopts solid-state thermoelectric chips as heat inverter parts. The system has the advantages of being light-weight, quite, and mobile, requiring no maintenance, and havng easily-supplied heat source. The system can be used a as long as burning is allowed. This system works well for highly-mobilized outdoors situations by providing a power for illumination, entertainment equipment or the wireless equipment at refuge. Under heavy storms such as typhoon, when the solar panels become ineffective and the wind-powered machines malfunction, the thermoelectric power generator can continue providing the vital power.
Abstract: Histogram equalization is often used in image enhancement, but it can be also used in auto exposure. However, conventional histogram equalization does not work well when many pixels are concentrated in a narrow luminance range.This paper proposes an auto exposure method based on 2-way histogram equalization. Two cumulative distribution functions are used, where one is from dark to bright and the other is from bright to dark. In this paper, the proposed auto exposure method is also designed and implemented for image signal processors with full-HD images.
Abstract: Text categorization is the problem of classifying text
documents into a set of predefined classes. In this paper, we
investigated three approaches to build a meta-classifier in order to
increase the classification accuracy. The basic idea is to learn a metaclassifier
to optimally select the best component classifier for each
data point. The experimental results show that combining classifiers
can significantly improve the accuracy of classification and that our
meta-classification strategy gives better results than each individual
classifier. For 7083 Reuters text documents we obtained a
classification accuracies up to 92.04%.
Abstract: This paper proposes a method, combining color and
layout features, for identifying documents captured from lowresolution
handheld devices. On one hand, the document image color
density surface is estimated and represented with an equivalent
ellipse and on the other hand, the document shallow layout structure
is computed and hierarchically represented. The combined color and
layout features are arranged in a symbolic file, which is unique for
each document and is called the document-s visual signature. Our
identification method first uses the color information in the
signatures in order to focus the search space on documents having a
similar color distribution, and finally selects the document having the
most similar layout structure in the remaining search space. Finally,
our experiment considers slide documents, which are often captured
using handheld devices.
Abstract: A conventional binding method for low power in a
high-level synthesis mainly focuses on finding an optimal binding for
an assumed input data, and obtains only one binding table. In this
paper, we show that a binding method which uses multiple binding
tables gets better solution compared with the conventional methods
which use a single binding table, and propose a dynamic bus binding
scheme for low power using multiple binding tables. The proposed
method finds multiple binding tables for the proper partitions of an
input data, and switches binding tables dynamically to produce the
minimum total switching activity. Experimental result shows that the
proposed method obtains a binding solution having 12.6-28.9%
smaller total switching activity compared with the conventional
methods.
Abstract: The objective of this paper is to estimate realistic
principal extrusion process parameters by means of artificial neural
network. Conventionally, finite element analysis is used to derive
process parameters. However, the finite element analysis of the
extrusion model does not consider the manufacturing process
constraints in its modeling. Therefore, the process parameters
obtained through such an analysis remains highly theoretical.
Alternatively, process development in industrial extrusion is to a
great extent based on trial and error and often involves full-size
experiments, which are both expensive and time-consuming. The
artificial neural network-based estimation of the extrusion process
parameters prior to plant execution helps to make the actual extrusion
operation more efficient because more realistic parameters may be
obtained. And so, it bridges the gap between simulation and real
manufacturing execution system. In this work, a suitable neural
network is designed which is trained using an appropriate learning
algorithm. The network so trained is used to predict the
manufacturing process parameters.
Abstract: Sharing the manufacturing facility through remote
operation and monitoring of a machining process is challenge for
effective use the production facility. Several automation tools in term
of hardware and software are necessary for successfully remote
operation of a machine. This paper presents a prototype of workpiece
holding attachment for remote operation of milling process by self
configuration the workpiece setup. The prototype is designed with
mechanism to reorient the work surface into machining spindle
direction with high positioning accuracy. Variety of parts geometry
is hold by attachment to perform single setup machining. Pin type
with array pattern additionally clamps the workpiece surface from
two opposite directions for increasing the machining rigidity.
Optimum pins configuration for conforming the workpiece geometry
with minimum deformation is determined through hybrid algorithms,
Genetic Algorithms (GA) and Particle Swarm Optimization (PSO).
Prototype with intelligent optimization technique enables to hold
several variety of workpiece geometry which is suitable for
machining low of repetitive production in remote operation.
Abstract: Electrospinning is a broadly used technology to obtain
polymeric nanofibers ranging from several micrometers down to
several hundred nanometers for a wide range of applications. It offers
unique capabilities to produce nanofibers with controllable porous
structure. With smaller pores and higher surface area than regular
fibers, electrospun fibers have been successfully applied in various
fields, such as, nanocatalysis, tissue engineering scaffolds, protective
clothing, filtration, biomedical, pharmaceutical, optical electronics,
healthcare, biotechnology, defense and security, and environmental
engineering. In this study, polyurethane nanofibers were obtained
under different electrospinning parameters. Fiber morphology and
diameter distribution were investigated in order to understand them
as a function of process parameters.
Abstract: Statistical learning theory was developed by Vapnik. It
is a learning theory based on Vapnik-Chervonenkis dimension. It also
has been used in learning models as good analytical tools. In general, a
learning theory has had several problems. Some of them are local
optima and over-fitting problems. As well, statistical learning theory
has same problems because the kernel type, kernel parameters, and
regularization constant C are determined subjectively by the art of
researchers. So, we propose an evolutionary statistical learning theory
to settle the problems of original statistical learning theory.
Combining evolutionary computing into statistical learning theory,
our theory is constructed. We verify improved performances of an
evolutionary statistical learning theory using data sets from KDD cup.
Abstract: An optical fiber Fabry-Perot interferometer (FFPI) is
proposed and demonstrated for dynamic measurements in a
mechanical vibrating target. A polishing metal with a low reflectance
value adhered to a mechanical vibrator was excited via a function
generator at various excitation frequencies. Output interference
fringes were generated by modulating the reference and sensing
signal at the output arm. A fringe-counting technique was used for
interpreting the displacement information on the dedicated computer.
The fiber interferometer has been found the capability of the
displacement measurements of 1.28 μm – 96.01 μm. A commercial
displacement sensor was employed as a reference sensor for
investigating the measurement errors from the fiber sensor. A
maximum percentage measurement error of approximately 1.59 %
was obtained.
Abstract: This paper reports a case study on how a conceptual
and analytical thinking approach was used in Art and Design Department at Multimedia University (Malaysia) in addressing the
issues of one nation and its impact in the society through artworks. The art project was designed for students to increase the know-how
and develop creative thinking in design and communication. Goals of the design project were: (1) to develop creative thinking in design
and communication, (2) to increase student understanding on the
process of problem solving for design work, and (3) to use design
elements and principles to generate interest, attention and emotional responses. An exhibition entitled "One Nation" was showcased to
local and international viewers consisting of the general public, professionals, academics, artists and students. Findings indicate that the project supported several visual art standards, as well as
generated awareness in the society. This project may be of interest to
current and future art educators and others interested in the potential
of utilizing global issues as content for art, community and environment studies for the purpose of educational art.
Abstract: Software Development Risks Identification (SDRI),
using Fault Tree Analysis (FTA), is a proposed technique to identify
not only the risk factors but also the causes of the appearance of the
risk factors in software development life cycle. The method is based
on analyzing the probable causes of software development failures
before they become problems and adversely affect a project. It uses
Fault tree analysis (FTA) to determine the probability of a particular
system level failures that are defined by A Taxonomy for Sources of
Software Development Risk to deduce failure analysis in which an
undesired state of a system by using Boolean logic to combine a
series of lower-level events. The major purpose of this paper is to use
the probabilistic calculations of Fault Tree Analysis approach to
determine all possible causes that lead to software development risk
occurrence
Abstract: The design of a modern aircraft is based on three pillars: theoretical results, experimental test and computational simulations.
As a results of this, Computational Fluid Dynamic (CFD) solvers are
widely used in the aeronautical field. These solvers require the correct
selection of many parameters in order to obtain successful results. Besides, the computational time spent in the simulation depends on
the proper choice of these parameters.
In this paper we create an expert system capable of making an
accurate prediction of the number of iterations and time required for the convergence of a computational fluid dynamic (CFD) solver.
Artificial neural network (ANN) has been used to design the expert system. It is shown that the developed expert system is capable of making an accurate prediction the number of iterations and time
required for the convergence of a CFD solver.
Abstract: Software estimation accuracy is among the greatest
challenges for software developers. This study aimed at building and
evaluating a neuro-fuzzy model to estimate software projects
development time. The forty-one modules developed from ten
programs were used as dataset. Our proposed approach is compared
with fuzzy logic and neural network model and Results show that the
value of MMRE (Mean of Magnitude of Relative Error) applying
neuro-fuzzy was substantially lower than MMRE applying fuzzy
logic and neural network.
Abstract: The authors present an algorithm for order reduction of linear dynamic systems using the combined advantages of stability equation method and the error minimization by Genetic algorithm. The denominator of the reduced order model is obtained by the stability equation method and the numerator terms of the lower order transfer function are determined by minimizing the integral square error between the transient responses of original and reduced order models using Genetic algorithm. The reduction procedure is simple and computer oriented. It is shown that the algorithm has several advantages, e.g. the reduced order models retain the steady-state value and stability of the original system. The proposed algorithm has also been extended for the order reduction of linear multivariable systems. Two numerical examples are solved to illustrate the superiority of the algorithm over some existing ones including one example of multivariable system.
Abstract: MinC plays an important role in bacterial cell division
system by inhibiting FtsZ assembly. However, the molecular
mechanism of the action is poorly understood. E. coli MinC Nterminus
domain was purified and crystallized using 1.4 M sodium
citrate pH 6.5 as a precipitant. X-ray diffraction data was collected
and processed to 2.3 Å from a native crystal. The crystal belonged to
space group P212121, with the unit cell parameters a = 52.7, b = 54.0,
c = 64.7 Å. Assuming the presence of two molecules in the
asymmetric unit, the Matthews coefficient value is 1.94 Å3 Da-1,
which corresponds to a solvent content of 36.5%. The overall
structure of MinCN is observed as a dimer form through anti-parallel
ß-strand interaction.
Abstract: Conventionally the selection of parameters depends
intensely on the operator-s experience or conservative technological
data provided by the EDM equipment manufacturers that assign
inconsistent machining performance. The parameter settings given by
the manufacturers are only relevant with common steel grades. A
single parameter change influences the process in a complex way.
Hence, the present research proposes artificial neural network (ANN)
models for the prediction of surface roughness on first commenced
Ti-15-3 alloy in electrical discharge machining (EDM) process. The
proposed models use peak current, pulse on time, pulse off time and
servo voltage as input parameters. Multilayer perceptron (MLP) with
three hidden layer feedforward networks are applied. An assessment
is carried out with the models of distinct hidden layer. Training of the
models is performed with data from an extensive series of
experiments utilizing copper electrode as positive polarity. The
predictions based on the above developed models have been verified
with another set of experiments and are found to be in good
agreement with the experimental results. Beside this they can be
exercised as precious tools for the process planning for EDM.
Abstract: Analytical solution of the first-order and third-order
shear deformation theories are developed to study the free vibration
behavior of simply supported functionally graded plates. The
material properties of plate are assumed to be graded in the thickness
direction as a power law distribution of volume fraction of the
constituents. The governing equations of functionally graded plates
are established by applying the Hamilton's principle and are solved
by using the Navier solution method. The influence of side-tothickness
ratio and constituent of volume fraction on the natural
frequencies are studied. The results are validated with the known
data in the literature.