Abstract: The effective machine-job assignment of injection
molding machines is very important for industry because it is not
only directly affects the quality of the product but also the
performance and lifetime of the machine as well. The phase of
machine selection was mostly done by professionals or experienced
planners, so the possibility of matching a job with an inappropriate
machine might occur when it was conducted by an inexperienced
person. It could lead to an uneconomical plan and defects. This
research aimed to develop a machine selection system for plastic
injection machines as a tool to help in decision making of the user.
This proposed system could be used both in normal times and in
times of emergency. Fuzzy logic principle is applied to deal with
uncertainty and mechanical factors in the selection of both quantity
and quality criteria. The six criteria were obtained from a plastic
manufacturer's case study to construct a system based on fuzzy logic
theory using MATLAB. The results showed that the system was able
to reduce the defects of Short Shot and Sink Mark to 24.0% and
8.0% and the total defects was reduced around 8.7% per month.
Abstract: Multifunctional structures are a potentially disruptive
technology that allows for significant mass savings on spacecraft.
The specific concept addressed herein is that of a multifunctional
power structure. In this paper, a parametric optimisation of the
design of such a structure that uses commercially available battery
cells is presented. Using numerical modelling, it was found that there
exists several trade-offs aboutthe conflict between the capacity of the
panel and its mechanical properties. It was found that there is no
universal optimal location for the cells. Placing them close to the
mechanical interfaces increases loading in the mechanically weak
cells whereas placing them at the centre of the panel increases the
stress inthe panel and reduces the stiffness of the structure.
Abstract: Most CT reconstruction system x-ray computed
tomography (CT) is a well established visualization technique in
medicine and nondestructive testing. However, since CT scanning
requires sampling of radiographic projections from different viewing
angles, common CT systems with mechanically moving parts are too
slow for dynamic imaging, for instance of multiphase flows or live
animals. A large number of X-ray projections are needed to
reconstruct CT images, so the collection and calculation of the
projection data consume too much time and harmful for patient. For
the purpose of solving the problem, in this study, we proposed a
method for tomographic reconstruction of a sample from a limited
number of x-ray projections by using linear interpolation method. In
simulation, we presented reconstruction from an experimental x-ray
CT scan of a Aluminum phantom that follows to two steps: X-ray
projections will be interpolated using linear interpolation method and
using it for CT reconstruction based upon Ordered Subsets
Expectation Maximization (OSEM) method.
Abstract: β-Glucosidase is an important enzyme for production
of ethanol from lignocellulose. With hydrolytic activity on
cellooligosaccharides, especially cellobiose, β-glucosidase removes
product inhibitory effect on cellulases and forms fermentable sugars.
In this study, β-glucosidase encoding gene (BGL1) from traditional
starter yeast Saccharomycosis fibuligera BMQ908 was cloned and
expressed in Pichia pastoris. BGL1 of S. fibuligera BMQ 908 shared
98% nucleotide homology with the closest GenBank sequence
(M22475) but identity in amino-acid sequences of catalytic domains.
Recombinant plasmid pPICZαA/BGL1 containing the sequence
encoding BGL1 mature protein and α-factor secretion signal was
constructed and transformed into methylotrophic yeast P. pastoris by
electroporation. The recombinant strain produced single extracellular
protein with molecular weight of 120 kDa and cellobiase activity of
60 IU/ml. The optimum pH of the recombinant β-glucosidase was 5.0
and the optimum temperature was 50°C.
Abstract: A new conceptual architecture for low-level neural
pattern recognition is presented. The key ideas are that the brain
implements support vector machines and that support vectors are
represented as memory patterns in competitive queuing memories. A
binary classifier is built from two competitive queuing memories
holding positive and negative valence training examples respectively.
The support vector machine classification function is calculated in
synchronized evaluation cycles. The kernel is computed by bisymmetric
feed-forward networks feed by sensory input and by
competitive queuing memories traversing the complete sequence of
support vectors. Temporary summation generates the output
classification. It is speculated that perception apparatus in the brain
reuses structures that have evolved for enabling fluent execution of
prepared action sequences so that pattern recognition is built on
internalized motor programmes.
Abstract: The purpose of this article is to identify the practical strategies of R&D (research and development) entities for developing converging technology in organizational context. Based on the multi-assignation technological domains of patents derived from entire government-supported R&D projects for 13 years, we find that technology convergence is likely to occur when a university solely develops technology or when university develops technology as one of the collaborators. These results reflect the important role of universities in developing converging technology
Abstract: Delivering course material via a virtual environment
is beneficial to today-s students because it offers the interactivity,
real-time interaction and social presence that students of all ages
have come to accept in our gaming rich community. It is essential
that the Net Generation also known as Generation Why, have
exposure to learning communities that encompass interactivity to
form social and educational connections. As student and professor
become interconnected through collaboration and interaction in a
virtual learning space, relationships develop and students begin to
take on an individual identity. With this in mind the research project
was developed to investigate the use of virtual environments on
student satisfaction and the effectiveness of course delivery.
Furthermore, the project was designed to integrate both interactive
(real-time) classes conducted in the Virtual Reality (VR)
environment while also creating archived VR sessions for student use
in retaining and reviewing course content.
Abstract: This paper explores gender related barriers to interagency collaboration in statutory children safeguard partnerships against a theoretical framework that considers individuals, professions and organisations interacting as part of a complex adaptive system. We argue that gender-framed obstacles to effective communication between culturally discrepant agencies can ultimately impact on the effectiveness of policy delivery,. We focused our research on three partnership structures in Sefton Metropolitan Borough in order to observe how interactions occur, whether the agencies involved perceive their occupational environment as being gender affected and whether they believe this can hinder effective collaboration with other biased organisations. Our principal empirical findings indicate that there is a general awareness amongst professionals of the role that gender plays in each of the agencies reviewed, that gender may well constitute a barrier to effective communication, but there is a sense in which there is little scope for change in the short term. We aim to signal here, however, the need to change against the risk of service failure.
Abstract: The Prediction of aerodynamic characteristics and
shape optimization of airfoil under the ground effect have been carried
out by integration of computational fluid dynamics and the multiobjective
Pareto-based genetic algorithm. The main flow
characteristics around an airfoil of WIG craft are lift force, lift-to-drag
ratio and static height stability (H.S). However, they show a strong
trade-off phenomenon so that it is not easy to satisfy the design
requirements simultaneously. This difficulty can be resolved by the
optimal design. The above mentioned three characteristics are chosen
as the objective functions and NACA0015 airfoil is considered as a
baseline model in the present study. The profile of airfoil is
constructed by Bezier curves with fourteen control points and these
control points are adopted as the design variables. For multi-objective
optimization problems, the optimal solutions are not unique but a set
of non-dominated optima and they are called Pareto frontiers or Pareto
sets. As the results of optimization, forty numbers of non- dominated
Pareto optima can be obtained at thirty evolutions.
Abstract: This study deals with Computational Fluid Dynamics
(CFD) studies of the interactions between the air flow and louvered
fins which equipped the automotive heat exchangers. 3D numerical
simulation results are obtained by using the ANSYS Fluent 13.0 code
and compared to experimental data. The paper studies the effect of
louver angle and louver pitch geometrical parameters, on overall
thermal hydraulic performances of louvered fins.
The comparison between CFD simulations and experimental data
show that established 3-D CFD model gives a good agreement. The
validation agrees, with about 7% of deviation respectively of friction
and Colburn factors to experimental results. As first, it is found that
the louver angle has a strong influence on the heat transfer rate. Then,
louver angle and louver pitch variation of the louvers and their effects
on thermal hydraulic performances are studied. In addition to this
study, it is shown that the second half of the fin takes has a
significant contribution on pressure drop increase without any
increase in heat transfer.
Abstract: Maintenance costs incurred on building differs. The
difference can be as results of the types, functions, age, building
health index, size, form height, location and complexity of the
building. These are contributing to the difficulty in maintenance
development of deterministic maintenance cost model. This paper is
concerns with reporting the preliminary findings on the creation of
building maintenance cost distributions for universities in Malaysia.
This study is triggered by the need to provide guides on maintenance
costs distributions for decision making. For this purpose, a survey
questionnaire was conducted to investigate the distribution of
maintenance costs in the universities. Altogether, responses were
received from twenty universities comprising both private and
publicly owned. The research found that engineering services,
roofing and finishes were the elements contributing the larger
segment of the maintenance costs. Furthermore, the study indicates
the significance of maintenance cost distribution as decision making
tool towards maintenance management.
Abstract: Many experimental results suggest that more precise
spike timing is significant in neural information processing. We
construct a self-organization model using the spatiotemporal patterns,
where Spike-Timing Dependent Plasticity (STDP) tunes the
conduction delays between neurons. We show that the fluctuation of
conduction delays causes globally continuous and locally distributed
firing patterns through the self-organization.
Abstract: Cameron Highlands is known for upland tourism area
with vast natural wealth, mountainous landscape endowed with rich
diverse species as well as people traditions and cultures. With these
various resources, CH possesses an interesting visual and panorama
that can be offered to the tourist. However this benefit may not be
utilized without obtaining the understanding of existing landscape
structure and visual. Given a limited data, this paper attempts to
classify landscape visual of Cameron Highlands using land use and
contour data. Visual points of view were determined from the given
tourist attraction points in the CH Local Plan 2003-2015. The result
shows landscape visual and structure categories offered in the study
area. The result can be used for further analysis to determine the best
alternative tourist trails for tourism planning and decision making
using readily available data.
Abstract: Sharing motivations of viral advertisements by
consumers and the impacts of these advertisements on the
perceptions for brand will be questioned in this study. Three
fundamental questions are answered in the study. These are
advertisement watching and sharing motivations of individuals,
criteria of liking viral advertisement and the impact of individual
attitudes for viral advertisement on brand perception respectively.
This study will be carried out via a viral advertisement which was
practiced in Turkey. The data will be collected by survey method and
the sample of the study consists of individuals who experienced the
practice of sample advertisement. Data will be collected by online
survey method and will be analyzed by using SPSS statistical
package program.
Recently traditional advertisement mind have been changing. New
advertising approaches which have significant impacts on consumers
have been argued. Viral advertising is a modernist advertisement
mind which offers significant advantages to brands apart from
traditional advertising channels such as television, radio and
magazines. Viral advertising also known as Electronic Word-of-
Mouth (eWOM) consists of free spread of convincing messages sent
by brands among interpersonal communication. When compared to
the traditional advertising, a more provocative thematic approach is
argued.
The foundation of this approach is to create advertisements that
are worth sharing with others by consumers. When that fact is taken
into consideration, in a manner of speaking it can also be stated that
viral advertising is media engineering.
The content worth sharing makes people being a volunteer
spokesman of a brand and strengthens the emotional bonds among
brand and consumer. Especially for some sectors in countries which
are having traditional advertising channel limitations, viral
advertising creates vital advantages.
Abstract: This paper aims to present the main instruments used
in the economic literature for measuring the price risk, pointing out
on the advantages brought by the conditional variance in this respect.
The theoretical approach will be exemplified by elaborating an
EGARCH model for the price returns of wheat, both on Romanian
and on international market. To our knowledge, no previous
empirical research, either on price risk measurement for the
Romanian markets or studies that use the ARIMA-EGARCH
methodology, have been conducted. After estimating the
corresponding models, the paper will compare the estimated
conditional variance on the two markets.
Abstract: A 3D industrial computed tomography (CT)
manufactured based on a first generation CT systems, single-source
– single-detector, was evaluated. Operation accuracy assessment of
the manufactured system was achieved using simulation in
comparison with experimental tests. 137Cs and 60Co were used as a gamma source. Simulations were achieved using MCNP4C code.
Experimental tests of 137Cs were in good agreement with the simulations
Abstract: The production of ethyl tert-butyl ether (ETBE) was
simulated through Aspen Plus. The objective of this work was to use
the simulation results to be an alternative platform for ETBE
production from naphtha cracking wastes for the industry to develop.
ETBE is produced from isobutylene which is one of the wastes in
naphtha cracking process. The content of isobutylene in the waste is
less than 30% weight. The main part of this work was to propose a
process to save the environment and to increase the product value by
converting a great majority of the wastes into ETBE. Various
processes were considered to determine the optimal production of
ETBE. The proposed process increased ETBE production yield by
100% from conventional process with the purity of 96% weight. The
results showed a great promise for developing this proposed process
in an industrial scale.
Abstract: This paper addresses the problem of building a unified
structure to describe a peer-to-peer system. Our approach uses the
well-known notations in the P2P area, and provides a global
architecture that puts a separation between the platform specific
characteristics and the logical ones. In order to enable the navigation
of the peer across platforms, a roaming layer is added. The latter
provides a capability to define a unique identification of peer and
assures the mapping between this identification and those used in
each platform. The mapping task is assured by special wrapper. In
addition, ontology is proposed to give a clear presentation of the
structure of the P2P system without interesting in the content and the
resource managed by the peer. The ontology is created according to
the web semantic paradigm and using OWL language; so, the
structure of the system is considered as a web resource.
Abstract: This paper describes a novel projection algorithm, the Projection Onto Span Algorithm (POSA) for wavelet-based superresolution and removing speckle (in wavelet domain) of unknown variance from Synthetic Aperture Radar (SAR) images. Although the POSA is good as a new superresolution algorithm for image enhancement, image metrology and biometric identification, here one will use it like a tool of despeckling, being the first time that an algorithm of super-resolution is used for despeckling of SAR images. Specifically, the speckled SAR image is decomposed into wavelet subbands; POSA is applied to the high subbands, and reconstruct a SAR image from the modified detail coefficients. Experimental results demonstrate that the new method compares favorably to several other despeckling methods on test SAR images.
Abstract: Our study proposes an alternative method in building
Fuzzy Rule-Based System (FRB) from Support Vector Machine
(SVM). The first set of fuzzy IF-THEN rules is obtained through
an equivalence of the SVM decision network and the zero-ordered
Sugeno FRB type of the Adaptive Network Fuzzy Inference System
(ANFIS). The second set of rules is generated by combining the
first set based on strength of firing signals of support vectors using
Gaussian kernel. The final set of rules is then obtained from the
second set through input scatter partitioning. A distinctive advantage
of our method is the guarantee that the number of final fuzzy IFTHEN
rules is not more than the number of support vectors in the
trained SVM. The final FRB system obtained is capable of performing
classification with results comparable to its SVM counterpart, but it
has an advantage over the black-boxed SVM in that it may reveal
human comprehensible patterns.