Abstract: In this investigation, the antibacterial effects of
ethanolic and 7:3 isopropyl –hexane mixture extracts of Zingiber
officinale were evaluated against three Gram positive bacteria, B.
cereus, S.epidermidis, S. aureus and three Gram negative bacteria, E.
coli, K.pneumonia and P.areuginosa. Utilizing paper disk diffusion
and well methods in-vitro, MIC and MBC were determined by
macrodilution. The results showed that ethanolic rhizome extract of
ginger had significantly active than Isopropyl –hexan extract. Further
work needs to be done in these extracts including fractionation to
isolate active constituents and subsequent pharmacological
evaluation.
Abstract: An effective method for the early detection of breast
cancer is the mammographic screening. One of the most important
signs of early breast cancer is the presence of microcalcifications. For
the detection of microcalcification in a mammography image, we
propose to conceive a multiagent system based on a dual irregular
pyramid.
An initial segmentation is obtained by an incremental approach;
the result represents level zero of the pyramid. The edge information
obtained by application of the Canny filter is taken into account to
affine the segmentation. The edge-agents and region-agents cooper
level by level of the pyramid by exploiting its various characteristics
to provide the segmentation process convergence.
Abstract: A considerable amount of energy is consumed during
transmission and reception of messages in a wireless mesh network
(WMN). Reducing per-node transmission power would greatly
increase the network lifetime via power conservation in addition to
increasing the network capacity via better spatial bandwidth reuse. In
this work, the problem of topology control in a hybrid WMN of
heterogeneous wireless devices with varying maximum transmission
ranges is considered. A localized distributed topology control
algorithm is presented which calculates the optimal transmission
power so that (1) network connectivity is maintained (2) node
transmission power is reduced to cover only the nearest neighbours
(3) networks lifetime is extended. Simulations and analysis of results
are carried out in the NS-2 environment to demonstrate the
correctness and effectiveness of the proposed algorithm.
Abstract: Recently, analysis and designing of the structures
based on the Reliability theory have been the center of attention.
Reason of this attention is the existence of the natural and random
structural parameters such as the material specification, external
loads, geometric dimensions etc. By means of the Reliability theory,
uncertainties resulted from the statistical nature of the structural
parameters can be changed into the mathematical equations and the
safety and operational considerations can be considered in the
designing process. According to this theory, it is possible to study the
destruction probability of not only a specific element but also the
entire system. Therefore, after being assured of safety of every
element, their reciprocal effects on the safety of the entire system can
be investigated.
Abstract: Recent changes in food retailing structure have led to the development of large supercenters in suburban areas of the United States. These changes have led some authors to suggest that there are food deserts in some urban areas, where food is difficult to access, especially for disadvantaged consumers. This study tests the food desert hypothesis by comparing the distance from food retailers to food secure and food insecure households in one urban, Midwest neighborhood. This study utilizes GIS to compare household survey respondent locations against the location of various types of area food retailers. Results of this study indicate no apparent difference between food secure and insecure households in the reported importance of distance on the decision to shop at various retailers. However, there were differences in the spatial relationship between households and retailers. Food insecure households tended to be located slightly farther from large food retailers and slightly closer to convenience stores. Furthermore, food insecure households reported traveling slightly farther to their primary food retailer. The differences between the two groups was, however, relatively small.
Abstract: Functioning of a biometric system in large part
depends on the performance of the similarity measure function.
Frequently a generalized similarity distance measure function such as
Euclidian distance or Mahalanobis distance is applied to the task of
matching biometric feature vectors. However, often accuracy of a
biometric system can be greatly improved by designing a customized
matching algorithm optimized for a particular biometric application.
In this paper we propose a tailored similarity measure function for
behavioral biometric systems based on the expert knowledge of the
feature level data in the domain. We compare performance of a
proposed matching algorithm to that of other well known similarity
distance functions and demonstrate its superiority with respect to the
chosen domain.
Abstract: Linear induction motors are used in various industries
but they have some specific phenomena which are the causes for
some problems. The most important phenomenon is called end effect.
End effect decreases efficiency, power factor and output force and
unbalances the phase currents. This phenomenon is more important
in medium and high speeds machines. In this paper a factor, EEF , is
obtained by an accurate equivalent circuit model, to determine the
end effect intensity. In this way, all of effective design parameters on
end effect is described. Accuracy of this equivalent circuit model is
evaluated by two dimensional finite-element analysis using ANSYS.
The results show the accuracy of the equivalent circuit model.
Abstract: Logic based methods for learning from structured data
is limited w.r.t. handling large search spaces, preventing large-sized
substructures from being considered by the resulting classifiers. A
novel approach to learning from structured data is introduced that
employs a structure transformation method, called finger printing, for
addressing these limitations. The method, which generates features
corresponding to arbitrarily complex substructures, is implemented in
a system, called DIFFER. The method is demonstrated to perform
comparably to an existing state-of-art method on some benchmark
data sets without requiring restrictions on the search space.
Furthermore, learning from the union of features generated by finger
printing and the previous method outperforms learning from each
individual set of features on all benchmark data sets, demonstrating
the benefit of developing complementary, rather than competing,
methods for structure classification.
Abstract: Modern culture, based on disinhibition of cultural trends and on heterodirection, is promoting openmindedness attitudes towards ethnic diversity, but on the other hand also new forms of social representations of the foreigner. Social representation is situated between the psychic field and the social one; it is the representation of oneself and of the other one, hanging between social categories and individual inner world. We will produce the results of a research on the representation of the foreigner, built on the type of prejudice prevailing among middle-low or middle-high educational qualification subjects, in which prejudicial attitudes seem to descend from precise mental images of the foreigner.
Abstract: The possible therapeutic effect of cannabidiol, the major non-psychotropic Cannabis constituent, was investigated against acute hepatotoxicity induced by a single oral dose of acetaminophen (500mg/kg) in mice. Cannabidiol (two intraperitoneal injections, 5mg/kg, each) was given 1 hour and 12 hours following acetaminophen administration. Acetaminophen administration caused significant elevations of serum alanine aminotransferase, and hepatic malondialdehyde, and nitric oxide levels, and a significant decrease in hepatic reduced glutathione. Cannabidiol significantly attenuated the deterioration in the measured biochemical parameters resulted from acetaminophen administration. Also, histopathological examination showed that cannabidiol markedly attenuated ameliorated acetaminophen-induced liver tissue damage. These results emphasize that cannabidiol represents a potential therapeutic option to protect against acetaminophen hepartotoxicity which is a common clinical problem.
Abstract: Supersonic open and closed cavity flows are investigated experimentally and computationally. Free stream Mach number of two is set. Schlieren imaging is used to visualise the flow behaviour showing stark differences between open and closed. Computational Fluid Dynamics (CFD) is used to simulate open cavity of flow with aspect ratio of 4. A rear wall treatment is implemented in order to pursue a simple passive control approach. Good qualitative agreement is achieved between the experimental flow visualisation and the CFD in terms of the expansion-shock waves system. The cavity oscillations are shown to be dominated by the first and third Rossister modes combining to high fluctuations of non-linear nature above the cavity rear edge. A simple rear wall treatment in terms of a hole shows mixed effect on the flow oscillations, RMS contours, and time history density fluctuations are given and analysed.
Abstract: The distillation process in the general sense is a
relatively simple technique from the standpoints of its principles.
When dedicating distillation to water treatment and specifically
producing fresh water from sea, ocean and/ briny waters it is
interesting to notice that distillation has no limitations or domains of
applicability regarding the nature or the type of the feedstock water.
This is not the case however for other techniques that are
technologically quite complex, necessitate bigger capital investments
and are limited in their usability. In a previous paper we have
explored some of the effects of temperature on yield. In this paper,
we continue building onto that knowledge base and focus on the
effects of several additional engineering and design variables on
productivity.
Abstract: This paper presents a fuzzy control system for a three degree of freedom (3-DOF) stabilized platform with explicit decoupling scheme. The system under consideration is a system with strong interactions between three channels. By using the concept of decentralized control, a control structure is developed that is composed of three control loops, each of which is associated with a single-variable fuzzy controller and a decoupling unit. Takagi-Sugeno (TS) fuzzy control algorithm is used to implement the fuzzy controller. The decoupling units design is based on the adaptive theory reasoning. Simulation tests were established using Simulink of Matlab. The obtained results have demonstrated the feasibility and effectiveness of the proposed approach. Simulation results are represented in this paper.
Abstract: Well-developed strategic marketing planning is the essential
prerequisite for establishment of the right and unique competitive
advantage. Typical market, however, is a heterogeneous
and decentralized structure with natural involvement of individual
or group subjectivity and irrationality. These features cannot be
fully expressed with one-shot rigorous formal models based on,
e.g. mathematics, statistics or empirical formulas. We present an
innovative solution, extending the domain of agent based computational
economics towards the concept of hybrid modeling in service
provider and consumer market such as telecommunications. The
behavior of the market is described by two classes of agents -
consumer and service provider agents - whose internal dynamics
are fundamentally different. Customers are rather free multi-state
structures, adjusting behavior and preferences quickly in accordance
with time and changing environment. Producers, on the contrary,
are traditionally structured companies with comparable internal processes
and specific managerial policies. Their business momentum is
higher and immediate reaction possibilities limited. This limitation
underlines importance of proper strategic planning as the main
process advising managers in time whether to continue with more
or less the same business or whether to consider the need for future
structural changes that would ensure retention of existing customers
or acquisition of new ones.
Abstract: A generic and extendible Multi-Agent Data Mining
(MADM) framework, MADMF (the Multi-Agent Data Mining
Framework) is described. The central feature of the framework is that
it avoids the use of agreed meta-language formats by supporting a
framework of wrappers.
The advantage offered is that the framework is easily extendible,
so that further data agents and mining agents can simply be added to
the framework. A demonstration MADMF framework is currently
available. The paper includes details of the MADMF architecture and
the wrapper principle incorporated into it. A full description and
evaluation of the framework-s operation is provided by considering
two MADM scenarios.
Abstract: Climate change and environmental pressures are
major international issues nowadays. It is time when governments,
businesses and consumers have to respond through more
environmentally friendly and aware practices, products and policies.
This is the prime time to develop alternative sustainable construction
materials, reduce greenhouse gas emissions, save energy, look to
renewable energy sources and recycled materials, and reduce waste.
The utilization of waste materials (slag, fly ash, glass beads, plastic
and so on) in concrete manufacturing is significant due to its
engineering, financial, environmental and ecological benefits. Thus,
utilization of waste materials in concrete production is very much
helpful to reach the goal of the sustainable construction. Therefore,
this study intends to use glass beads in concrete production.
The paper reports on the performance of 9 different concrete
mixes containing different ratios of glass crushed to 5 mm - 20 mm
maximum size and glass marble of 20 mm size as coarse aggregate.
Ordinary Portland cement type 1 and fine sand less than 0.5 mm were
used to produce standard concrete cylinders. Compressive strength
tests were carried out on concrete specimens at various ages. Test
results indicated that the mix having the balanced ratio of glass beads
and round marbles possess maximum compressive strength which is
3889 psi, as glass beads perform better in bond formation but have
lower strength, on the other hand marbles are strong in themselves
but not good in bonding. These mixes were prepared following a
specific W/C and aggregate ratio; more strength can be expected to
achieve from different W/C, aggregate ratios, adding admixtures like
strength increasing agents, ASR inhibitor agents etc.
Abstract: Desert regions around the Nile valley in Upper Egypt
contain great extent of swelling soil. Many different comment
procedures of treatment of the swelling soils for construction such as
pre-swelling, load balance OR soil replacement. One of the measure
factors which affect the level of the aggressiveness of the swelling
soil is the direction of the infiltration water directions within the
swelling soils. In this paper a physical model was installed to
measure the effect of water on the swelling soil with replacement
using fatty acid distillation residuals (FADR) mixed with sand as
thick sand-FADR mixture to prevent the water pathway arrive to the
swelling soil. Testing program have been conducted on different
artificial samples with different sand to FADR contents ratios (4%,
6%, and 9%) to get the optimum value fulfilling the impermeable
replacement. The tests show that a FADR content of 9% is sufficient
to produce impermeable replacement.
Abstract: Determining how many virtual machines a Linux host
could run can be a challenge. One of tough missions is to find the
balance among performance, density and usability. Now KVM
hypervisor has become the most popular open source full
virtualization solution. It supports several ways of running guests with
more memory than host really has. Due to large differences between
minimum and maximum guest memory requirements, this paper
presents initial results on same-page merging, ballooning and live
migration techniques that aims at optimum memory usage on
KVM-based cloud platform. Given the design of initial experiments,
the results data is worth reference for system administrators. The
results from these experiments concluded that each method offers
different reliability tradeoff.
Abstract: Asphalt surfaces are exposed to various weather
conditions and dynamic loading caused by passing trucks and
vehicles. In such situations, asphalt cement shows so different
rheological-mechanical behavior. If asphalt cement isn-t compatible
enough, asphalt layer will be damaged immediately and expensive
repairing procedures should be performed then. To overcome this
problem, researchers study on mechanical improved asphalt cement.
In this study, bentonite was used in order to modify bitumen
characteristics and the modified bitumen's characteristics were
investigated by asphalt cement tests. Then, the optimal bitumen
content in various compounds was determined and asphalt samples
with different contents of additives were prepared and tested. Results
show using this kind of additive not only has caused improvement in
bitumen mechanical properties, but also improvement in Marshall
Parameters was achieved.
Abstract: There are a many of needs for the development of
SiC-based hydrogen sensor for harsh environment applications. We
fabricated and investigated Pd/Ta2O5/SiC-based hydrogen sensors
with MOS capacitor structure for high temperature process monitoring
and leak detection applications in such automotive, chemical and
petroleum industries as well as direct monitoring of combustion
processes. In this work, we used silicon carbide (SiC) as a substrate to
replace silicon which operating temperatures are limited to below
200°C. Tantalum oxide was investigated as dielectric layer which has
high permeability for hydrogen gas and high dielectric permittivity,
compared with silicon dioxide or silicon nitride. Then, electrical
response properties, such as I-V curve and dependence of capacitance
on hydrogen concentrations were analyzed in the temperature ranges
of room temperature to 500°C for performance evaluation of the
sensor.