Abstract: At any point of time, a power system operating
condition should be stable, meeting various operational criteria and it
should also be secure in the event of any credible contingency. Present
day power systems are being operated closer to their stability limits
due to economic and environmental constraints. Maintaining a stable
and secure operation of a power system is therefore a very important
and challenging issue. Voltage instability has been given much
attention by power system researchers and planners in recent years,
and is being regarded as one of the major sources of power system
insecurity. Voltage instability phenomena are the ones in which the
receiving end voltage decreases well below its normal value and does
not come back even after setting restoring mechanisms such as VAR
compensators, or continues to oscillate for lack of damping against the
disturbances. Reactive power limit of power system is one of the major
causes of voltage instability. This paper investigates the effects of
coordinated series capacitors (SC) with static VAR compensators
(SVC) on steady-state voltage stability of a power system. Also, the
influence of the presence of series capacitor on static VAR
compensator controller parameters and ratings required to stabilize
load voltages at certain values are highlighted.
Abstract: These paper, we approximate the average run length
(ARL) for CUSUM chart when observation are an exponential first
order moving average sequence (EMA1). We used Gauss-Legendre
numerical scheme for integral equations (IE) method for approximate
ARL0 and ARL1, where ARL in control and out of control,
respectively. We compared the results from IE method and exact
solution such that the two methods perform good agreement.
Abstract: Anaerobic Digestion has become a promising
technology for biological transformation of organic fraction of the
municipal solid wastes (MSW). In order to represent the kinetic
behavior of such biological process and thereby to design a reactor
system, development of a mathematical model is essential.
Addressing this issue, a simplistic mathematical model has been
developed for anaerobic digestion of MSW in a continuous flow
reactor unit under homogeneous steady state condition. Upon
simulated hydrolysis, the kinetics of biomass growth and substrate
utilization rate are assumed to follow first order reaction kinetics.
Simulation of this model has been conducted by studying sensitivity
of various process variables. The model was simulated using typical
kinetic data of anaerobic digestion MSW and typical MSW
characteristics of Kolkata. The hydraulic retention time (HRT) and
solid retention time (SRT) time were mainly estimated by varying
different model parameters like efficiency of reactor, influent
substrate concentration and biomass concentration. Consequently,
design table and charts have also been prepared for ready use in the
actual plant operation.
Abstract: In this paper a combined feature selection method is
proposed which takes advantages of sample domain filtering,
resampling and feature subset evaluation methods to reduce
dimensions of huge datasets and select reliable features. This method
utilizes both feature space and sample domain to improve the process
of feature selection and uses a combination of Chi squared with
Consistency attribute evaluation methods to seek reliable features.
This method consists of two phases. The first phase filters and
resamples the sample domain and the second phase adopts a hybrid
procedure to find the optimal feature space by applying Chi squared,
Consistency subset evaluation methods and genetic search.
Experiments on various sized datasets from UCI Repository of
Machine Learning databases show that the performance of five
classifiers (Naïve Bayes, Logistic, Multilayer Perceptron, Best First
Decision Tree and JRIP) improves simultaneously and the
classification error for these classifiers decreases considerably. The
experiments also show that this method outperforms other feature
selection methods.
Abstract: Study of soil properties like field capacity (F.C.) and permanent wilting point (P.W.P.) play important roles in study of soil moisture retention curve. Although these parameters can be measured directly, their measurement is difficult and expensive. Pedotransfer functions (PTFs) provide an alternative by estimating soil parameters from more readily available soil data. In this investigation, 70 soil samples were collected from different horizons of 15 soil profiles located in the Ziaran region, Qazvin province, Iran. The data set was divided into two subsets for calibration (80%) and testing (20%) of the models and their normality were tested by Kolmogorov-Smirnov method. Both multivariate regression and artificial neural network (ANN) techniques were employed to develop the appropriate PTFs for predicting soil parameters using easily measurable characteristics of clay, silt, O.C, S.P, B.D and CaCO3. The performance of the multivariate regression and ANN models was evaluated using an independent test data set. In order to evaluate the models, root mean square error (RMSE) and R2 were used. The comparison of RSME for two mentioned models showed that the ANN model gives better estimates of F.C and P.W.P than the multivariate regression model. The value of RMSE and R2 derived by ANN model for F.C and P.W.P were (2.35, 0.77) and (2.83, 0.72), respectively. The corresponding values for multivariate regression model were (4.46, 0.68) and (5.21, 0.64), respectively. Results showed that ANN with five neurons in hidden layer had better performance in predicting soil properties than multivariate regression.
Abstract: These In this work, a regular unit speed curve in six
dimensional Euclidean space, whose Frenet curvatures are constant,
is considered. Thereafter, a method to calculate Frenet apparatus of
this curve is presented.
Abstract: World has entered in 21st century. The technology of
computer graphics and digital cameras is prevalent. High resolution
display and printer are available. Therefore high resolution images
are needed in order to produce high quality display images and high
quality prints. However, since high resolution images are not usually
provided, there is a need to magnify the original images. One
common difficulty in the previous magnification techniques is that of
preserving details, i.e. edges and at the same time smoothing the data
for not introducing the spurious artefacts. A definitive solution to this
is still an open issue. In this paper an image magnification using
adaptive interpolation by pixel level data-dependent geometrical
shapes is proposed that tries to take into account information about
the edges (sharp luminance variations) and smoothness of the image.
It calculate threshold, classify interpolation region in the form of
geometrical shapes and then assign suitable values inside
interpolation region to the undefined pixels while preserving the
sharp luminance variations and smoothness at the same time.
The results of proposed technique has been compared qualitatively
and quantitatively with five other techniques. In which the qualitative
results show that the proposed method beats completely the Nearest
Neighbouring (NN), bilinear(BL) and bicubic(BC) interpolation. The
quantitative results are competitive and consistent with NN, BL, BC
and others.
Abstract: The aim of the study was to investigate phytochemical
properties, antimicrobial activity and cytotoxicity of Aloe vera. The
phytochemical screening of the extracts of leaves of A. vera revealed
the presence of bioactive compounds such as alkaloids, tannins,
flavonoids phenolic compounds, and etc. with absence of cyanogenic
glycosides. Three different solvents such as methanol, ethanol and
Di-Methyl sulfoxide were used to screen the antimicrobial activity of
A. vera leaves against four human clinical pathogens by agar well
diffusion method. The maximum antibacterial activities were
observed in methanol extract followed by ethanol and Di-Methyl
sulfoxide. It was also found that remarkable antibacterial activities
with methanolic and ethanolic extracts of A. vera compared with the
standard antibiotic, tetracycline that was not active against E. coli
and S. boydii and supported the view that A. vera is a potent
antimicrobial agent compared with the conventional antibiotic.
Moreover, the brine shrimps (Artemia salina) toxicity test exhibited
LC50 value was 569.52 ppm. The resulting data indicated that the A.
vera plant have less toxic effects on brine shrimp. Hence, it is
signified that Aloe vera plant extract is safe to be used as an
antimicrobial agent.
Abstract: Many new experimental films which were free from conventional movie forms have appeared since Nubellbak Movement in the late 1950s. Forty years after the movement started, on March 13th, 1995, on the 100th anniversary of the birth of film, the declaration called Dogme 95, was issued in Copenhagen, Denmark. It aimed to create a new style of avant-garde film, and showed a tendency toward being anti-Hollywood and anti-genre, which were against the highly popular Hollywood trend of movies based on large-scale investment. The main idea of Dogme 95 is the opposition to 'the writer's doctrine' that a film should be the artist's individual work and to 'the overuse of technology' in film. The key figures declared ten principles called 'Vow of Chastity', by which new movie forms were to be produced. Interview (2000), directed by Byunhyuk, was made in 2000, five years after Dogme 95 was declared. This movie was dedicated as the first Asian Dogme. This study will survey the relationship between Korean film and the Vow of Chastity through the Korean films released in theaters from a viewpoint of technology and content. It also will call attention to its effects on and significance to Korean film in modern society.
Abstract: The rapid advance of communication technology is
evolving the network environment into the broadband convergence
network. Likewise, the IT services operated in the individual network
are also being quickly converged in the broadband convergence
network environment. VoIP and IPTV are two examples of such new
services. Efforts are being made to develop the video phone service,
which is an advanced form of the voice-oriented VoIP service.
However, the new IT services will be subject to stability and reliability
vulnerabilities if the relevant security issues are not answered during
the convergence of the existing IT services currently being operated in
individual networks within the wider broadband network
environment. To resolve such problems, this paper attempts to analyze
the possible threats and identify the necessary security measures
before the deployment of the new IT services. Furthermore, it
measures the quality of the encryption algorithm application example
to describe the appropriate algorithm in order to present security
technology that will have no negative impact on the quality of the
video phone service.
Abstract: Dealing with hundreds of features in character
recognition systems is not unusual. This large number of features
leads to the increase of computational workload of recognition
process. There have been many methods which try to remove
unnecessary or redundant features and reduce feature dimensionality.
Besides because of the characteristics of Farsi scripts, it-s not
possible to apply other languages algorithms to Farsi directly. In this
paper some methods for feature subset selection using genetic
algorithms are applied on a Farsi optical character recognition (OCR)
system. Experimental results show that application of genetic
algorithms (GA) to feature subset selection in a Farsi OCR results in
lower computational complexity and enhanced recognition rate.
Abstract: Two algorithms are proposed to reduce the storage requirements for mammogram images. The input image goes through a shrinking process that converts the 16-bit images to 8-bits by using pixel-depth conversion algorithm followed by enhancement process. The performance of the algorithms is evaluated objectively and subjectively. A 50% reduction in size is obtained with no loss of significant data at the breast region.
Abstract: Recommender systems are usually regarded as an
important marketing tool in the e-commerce. They use important
information about users to facilitate accurate recommendation. The
information includes user context such as location, time and interest
for personalization of mobile users. We can easily collect information
about location and time because mobile devices communicate with the
base station of the service provider. However, information about user
interest can-t be easily collected because user interest can not be
captured automatically without user-s approval process. User interest
usually represented as a need. In this study, we classify needs into two
types according to prior research. This study investigates the
usefulness of data mining techniques for classifying user need type for
recommendation systems. We employ several data mining techniques
including artificial neural networks, decision trees, case-based
reasoning, and multivariate discriminant analysis. Experimental
results show that CHAID algorithm outperforms other models for
classifying user need type. This study performs McNemar test to
examine the statistical significance of the differences of classification
results. The results of McNemar test also show that CHAID performs
better than the other models with statistical significance.
Abstract: In this study, we report the synthesis and
characterization of nanohydroxyapatite (nHAp) in gelatin-starch
matrix via biomimetic method. Characterization of the samples was
performed using X-ray diffraction (XRD) and Fourier Transform
infrared spectroscopy (FT-IR). The Size and morphology of the
nHAp samples were determined using scanning and transmission
electron microscopy (SEM and TEM). The results reveal that the
shape and morphology of nHAp is influenced by presence of
biopolymers as template. Carbonyl and amino groups from gelatin
and hydroxyl from starch play crucial roles in HAp formation on the
surface of gelatin-starch.
Abstract: There are few studies on eggshell of leatherback turtle
which is endangered species in Thailand. This study was focusing on
the ultrastructure and elemental composition of leatherback turtle
eggshells collected from Andaman Sea Shore, Thailand during the
nesting season using scanning electron microscope (SEM). Three
eggshell layers of leatherback turtle; the outer cuticle layer or
calcareous layer, the middle layer or middle multistrata layer and the
inner fibrous layer were recognized. The outer calcareous layer was
thick and porosity which consisted of loose nodular units of various
crystal shapes and sizes. The loose attachment between these units
resulted in numerous spaces and openings. The middle layer was
compact thick with several multistrata and contained numerous
openings connecting to both outer cuticle layer and inner fibrous
layer. The inner fibrous layer was compact and thin, and composed of
numerous reticular fibers. Energy dispersive X-ray microanalysis
detector revealed energy spectrum of X-rays character emitted from
all elements on each layer. The percentages of all elements were
found in the following order: carbon (C) > oxygen (O) > calcium
(Ca) > sulfur (S) > potassium (K) > aluminum (Al) > iodine (I) >
silicon (Si) > chlorine (Cl) > sodium (Na) > fluorine (F) >
phosphorus (P) > magnesium (Mg). Each layer consisted of high
percentage of CaCO3 (approximately 98%) implying that it was
essential for turtle embryonic development. A significant difference
was found in the percentages of Ca and Mo in the 3layers. Moreover,
transition metal, metal and toxic non-metal contaminations were
found in leatherback turtle eggshell samples. These were palladium
(Pd), molybdenum (Mo), copper (Cu), aluminum (Al), lead (Pb), and
bromine (Br). The contamination elements were seen in the outer
layers except for Mo. All elements were readily observed and
mapped using Smiling program. X-ray images which mapped the
location of all elements were showed. Calcium containing in the
eggshell appeared in high contents and was widely distributing in
clusters of the outer cuticle layer to form CaCO3 structure. Moreover,
the accumulation of Na and Cl was observed to form NaCl which was
widely distributing in 3 eggshell layers. The results from this study
would be valuable on assessing the emergent success in this
endangered species.
Abstract: The effect of different tempering temperatures and heat treatment times on the corrosion resistance of austenitic stainless steels in oxalic acid was studied in this work using conventional weight loss and electrochemical measurements. Typical 304 and 316 stainless steel samples were tempered at 150oC, 250oC and 350oC after being austenized at 1050oC for 10 minutes. These samples were then immersed in 1.0M oxalic acid and their weight losses were measured at every five days for 30 days. The results show that corrosion of both types of ASS samples increased with an increase in tempering temperature and time and this was due to the precipitation of chromium carbides at the grain boundaries of these metals. Electrochemical results also confirm that the 304 ASS is more susceptible to corrosion than 316 ASS in this medium. This is attributed to the molybdenum in the composition of the latter. The metallographic images of these samples showed non–uniform distribution of precipitated chromium carbides at the grain boundaries of these metals and unevenly distributed carbides and retained austenite phases which cause galvanic effects in the medium.
Abstract: The incessant discomfort for Voluntary Counselling and Testing (VCT) exhibited by students in some tertiary institutions in Kano State, Nigeria is capable of causing Psychological Resistance as well as jeopardizing the purpose of HIV intervention. This study investigated the Prevalence of Psychological Resistance to VCT of HIV/AIDS among students of tertiary institutions in the state. Two null hypotheses were postulated and tested. Cross- Sectional Survey Design was employed in which 1512 sample was selected from a student population of 104,841 following Stratified Random Sampling technique. A self-developed 20-item scale whose reliability coefficient is 0.83 was used for data collection. Data analyzed via Chi-square and t-test reveals a prevalence of 38% with males (Mean=0.34; SD=0.475) constituting 60% and females (Mean=0.45; SD=0.498) 40%. Also, the calculated chi-square and ttest were not significant at 0.05 as such the null hypotheses were upheld. Recommendation offered suggests the use of reinforcement and social support for students who patronize HIV/AIDS counselling.
Abstract: The rising growth of the GSM cellular phone industry has tightening competition level between providers in making strategies enhancing the market shares in Indonesia. Tsel, as one of those companies, has to determine the proper strategy to sustain as well as improve the market share without reducing its operational income level. Portfolio simulation model is designed with a dynamic system approach. The result of this research is a recommendation to the company by optimizing its technological policies, services, and promotions. The tariff policies and the signal quality should not be the main focus because this company has had a large number of customers and a good infrastructural condition.
Abstract: The bioassay-guided isolation and purification of an
ethyl acetate extract of Aspergillus terreus MC751 led to the
characterization of butyrolactone I as an antidiabetic and antioxidant.
The antidiabetic activity of butyrolactone I was evaluated by α-
glucosidase and α-amylase inhibition assays. Butyrolactone I
demonstrated significant concentration-dependent, mixed-type
inhibitory activity against yeast α-glucosidase with an IC50 of 54μM.
However, the compound exhibited less activity against rat intestinal
α-glucosidase and α-amylase. This is the first report on α-glucosidase
inhibitory activity of butyrolactone I. The antioxidative activity of
butyrolactone I was evaluated based on scavenging effects on 1,1-
diphenyl-2-picrylhydrazyl (DPPH) (IC50 =51 μM) and hydrogen
peroxide (IC50= 141 μM) radicals as well as a reducing power assay.
The results suggest that butyrolactone I is a promising antidiabetic as
well as antioxidant and should be considered for clinical trials.
Abstract: Void formation in underfill is considered as failure
in flip chip manufacturing process. Void formation possibly caused
by several factors such as poor soldering and flux residue during
die attach process, void entrapment due moisture contamination,
dispense pattern process and setting up the curing process. This
paper presents the comparison of single step and two steps curing
profile towards the void and black dots formation in underfill for
Hi-CTE Flip Chip Ceramic Ball Grid Array Package (FC-CBGA).
Statistic analysis was conducted to analyze how different factors
such as wafer lot, sawing technique, underfill fillet height and
curing profile recipe were affected the formation of voids and
black dots. A C-Mode Scanning Aqoustic Microscopy (C-SAM)
was used to scan the total count of voids and black dots. It was
shown that the 2 steps curing profile provided solution for void
elimination and black dots in underfill after curing process.