Abstract: The aim of this paper is description of the notion of
the death for prisoners and the ways of deal with. They express
indifference, coldness, inability to accept the blame, they have no
shame and no empathy. Is it enough to perform acts verging on the
death. In this paper we described mechanisms and regularities of selfdestructive
behaviour in the view of the relevant literature? The
explanation of the phenomenon is of a biological and sociopsychological
nature. It must be clearly stated that all forms of selfdestructive
behaviour result from various impulses, conflicts and
deficits. That is why they should be treated differently in terms of
motivation and functions which they perform in a given group of
people. Behind self-destruction there seems to be a motivational
mechanism which forces prisoners to rebel and fight against the hated
law and penitentiary systems. The imprisoned believe that pain and
suffering inflicted on them by themselves are better than passive
acceptance of repression. The variety of self-destruction acts is wide,
and some of them take strange forms. We assume that a life-death
barrier is a kind of game for them. If they cannot change the
degrading situation, their life loses sense.
Abstract: Faults in a network may take various forms such as hardware/software errors, vertex/edge faults, etc. Folded hypercube is a well-known variation of the hypercube structure and can be constructed from a hypercube by adding a link to every pair of nodes with complementary addresses. Let FFv (respectively, FFe) be the set of faulty nodes (respectively, faulty links) in an n-dimensional folded hypercube FQn. Hsieh et al. have shown that FQn - FFv - FFe for n ≥ 3 contains a fault-free cycle of length at least 2n -2|FFv|, under the constraints that (1) |FFv| + |FFe| ≤ 2n - 4 and (2) every node in FQn is incident to at least two fault-free links. In this paper, we further consider the constraints |FFv| + |FFe| ≤ 2n - 3. We prove that FQn - FFv - FFe for n ≥ 5 still has a fault-free cycle of length at least 2n - 2|FFv|, under the constraints : (1) |FFv| + |FFe| ≤ 2n - 3, (2) |FFe| ≥ n + 2, and (3) every vertex is still incident with at least two links.
Abstract: In the recent works related with mixture discriminant
analysis (MDA), expectation and maximization (EM) algorithm is
used to estimate parameters of Gaussian mixtures. But, initial values
of EM algorithm affect the final parameters- estimates. Also, when
EM algorithm is applied two times, for the same data set, it can be
give different results for the estimate of parameters and this affect the
classification accuracy of MDA. Forthcoming this problem, we use
Self Organizing Mixture Network (SOMN) algorithm to estimate
parameters of Gaussians mixtures in MDA that SOMN is more robust
when random the initial values of the parameters are used [5]. We
show effectiveness of this method on popular simulated waveform
datasets and real glass data set.
Abstract: The more recent satellite projects/programs makes
extensive usage of real – time embedded systems. 16 bit processors
which meet the Mil-Std-1750 standard architecture have been used in
on-board systems. Most of the Space Applications have been written
in ADA. From a futuristic point of view, 32 bit/ 64 bit processors are
needed in the area of spacecraft computing and therefore an effort is
desirable in the study and survey of 64 bit architectures for space
applications. This will also result in significant technology
development in terms of VLSI and software tools for ADA (as the
legacy code is in ADA).
There are several basic requirements for a special processor for
this purpose. They include Radiation Hardened (RadHard) devices,
very low power dissipation, compatibility with existing operational
systems, scalable architectures for higher computational needs,
reliability, higher memory and I/O bandwidth, predictability, realtime
operating system and manufacturability of such processors.
Further on, these may include selection of FPGA devices, selection
of EDA tool chains, design flow, partitioning of the design, pin
count, performance evaluation, timing analysis etc.
This project deals with a brief study of 32 and 64 bit processors
readily available in the market and designing/ fabricating a 64 bit
RISC processor named RISC MicroProcessor with added
functionalities of an extended double precision floating point unit
and a 32 bit signal processing unit acting as co-processors. In this
paper, we emphasize the ease and importance of using Open Core
(OpenSparc T1 Verilog RTL) and Open “Source" EDA tools such as
Icarus to develop FPGA based prototypes quickly. Commercial tools
such as Xilinx ISE for Synthesis are also used when appropriate.
Abstract: Crosstalk is the major limiting issue in very high bit-rate digital subscriber line (VDSL) systems in terms of bit-rate or service coverage. At the central office side, joint signal processing accompanied by appropriate power allocation enables complex multiuser processors to provide near capacity rates. Unfortunately complexity grows with the square of the number of lines within a binder, so by taking into account that there are only a few dominant crosstalkers who contribute to main part of crosstalk power, the canceller structure can be simplified which resulted in a much lower run-time complexity. In this paper, a multiuser power control scheme, namely iterative waterfilling, is combined with previously proposed partial crosstalk cancellation approaches to demonstrate the best ever achieved performance which is verified by simulation results.
Abstract: Clustering algorithms help to understand the hidden
information present in datasets. A dataset may contain intrinsic and
nested clusters, the detection of which is of utmost importance. This
paper presents a Distributed Grid-based Density Clustering algorithm
capable of identifying arbitrary shaped embedded clusters as well as
multi-density clusters over large spatial datasets. For handling
massive datasets, we implemented our method using a 'sharednothing'
architecture where multiple computers are interconnected
over a network. Experimental results are reported to establish the
superiority of the technique in terms of scale-up, speedup as well as
cluster quality.
Abstract: In this article, while it is attempted to describe the
problem and its importance, transformational leadership is studied by considering leadership theories. Issues such as the definition of
transformational leadership and its aspects are compared on the basis of the ideas of various connoisseurs and then it (transformational leadership) is examined in successful and
unsuccessful companies. According to the methodology, the
method of research, hypotheses, population and statistical sample
are investigated and research findings are analyzed by using descriptive and inferential statistical methods in the framework of
analytical tables. Finally, our conclusion is provided by considering the results of statistical tests. The final result shows that
transformational leadership is significantly higher in successful companies than unsuccessful ones P
Abstract: Effective evaluation of software development effort is an important aspect of successful project management. Based on a large database with 4106 projects ever developed, this study statistically examines the factors that influence development effort. The factors found to be significant for effort are project size, average number of developers that worked on the project, type of development, development language, development platform, and the use of rapid application development. Among these factors, project size is the most critical cost driver. Unsurprisingly, this study found that the use of CASE tools does not necessarily reduce development effort, which adds support to the claim that the use of tools is subtle. As many of the current estimation models are rarely or unsuccessfully used, this study proposes a parsimonious parametric model for the prediction of effort which is both simple and more accurate than previous models.
Abstract: Optimization is often a critical issue for most system
design problems. Evolutionary Algorithms are population-based,
stochastic search techniques, widely used as efficient global
optimizers. However, finding optimal solution to complex high
dimensional, multimodal problems often require highly
computationally expensive function evaluations and hence are
practically prohibitive. The Dynamic Approximate Fitness based
Hybrid EA (DAFHEA) model presented in our earlier work [14]
reduced computation time by controlled use of meta-models to
partially replace the actual function evaluation by approximate
function evaluation. However, the underlying assumption in
DAFHEA is that the training samples for the meta-model are
generated from a single uniform model. Situations like model
formation involving variable input dimensions and noisy data
certainly can not be covered by this assumption. In this paper we
present an enhanced version of DAFHEA that incorporates a
multiple-model based learning approach for the SVM approximator.
DAFHEA-II (the enhanced version of the DAFHEA framework) also
overcomes the high computational expense involved with additional
clustering requirements of the original DAFHEA framework. The
proposed framework has been tested on several benchmark functions
and the empirical results illustrate the advantages of the proposed
technique.
Abstract: Shadow detection is still considered as one of the
potential challenges for intelligent automated video surveillance
systems. A pre requisite for reliable and accurate detection and
tracking is the correct shadow detection and classification. In such a
landscape of conditions, privacy issues add more and more
complexity and require reliable shadow detection.
In this work the intertwining between security, accuracy,
reliability and privacy is analyzed and, accordingly, a novel
architecture for Privacy Enhancing Video Surveillance (PEVS) is
introduced. Shadow detection and masking are dealt with through the
combination of two different approaches simultaneously. This results
in a unique privacy enhancement, without affecting security.
Subsequently, the methodology was employed successfully in a
large-scale wireless video surveillance system; privacy relevant
information was stored and encrypted on the unit, without
transferring it over an un-trusted network.
Abstract: The article is aimed at bringing information on the scope and the level of use of talent management by organizations in one of the Czech Republic regions, in the Moravian-Silesian Region. On the basis of data acquired by a questionnaire survey it has been found out that organizations in the above-mentioned region are implementing the system of talent management on a small scale: this approach is used by 3.8 % of organizations only that is 9 from 237 (100 %) of the approached respondents. The main reasons why this approach is not used is either that organizations have no knowledge of it or there is lack of financial and personnel resources. In the article recommendations suggested by the author can be found for a wider application of talent management in the Czech practice.
Abstract: The use of electronic sensors in the electronics
industry has become increasingly popular over the past few years,
and it has become a high competition product. The frequency
adjustment process is regarded as one of the most important process
in the electronic sensor manufacturing process. Due to inaccuracies
in the frequency adjustment process, up to 80% waste can be caused
due to rework processes; therefore, this study aims to provide a
preliminary understanding of the role of parameters used in the
frequency adjustment process, and also make suggestions in order to
further improve performance. Four parameters are considered in this
study: air pressure, dispensing time, vacuum force, and the distance
between the needle tip and the product. A full factorial design for
experiment 2k was considered to determine those parameters that
significantly affect the accuracy of the frequency adjustment process,
where a deviation in the frequency after adjustment and the target
frequency is expected to be 0 kHz. The experiment was conducted on
two levels, using two replications and with five center-points added.
In total, 37 experiments were carried out. The results reveal that air
pressure and dispensing time significantly affect the frequency
adjustment process. The mathematical relationship between these
two parameters was formulated, and the optimal parameters for air
pressure and dispensing time were found to be 0.45 MPa and 458 ms,
respectively. The optimal parameters were examined by carrying out
a confirmation experiment in which an average deviation of 0.082
kHz was achieved.
Abstract: The present work was conducted to find out the effect
of biofertilizer formulated with four species of bacteria (two species
of Azotobacter and two species of Lysobacter) and zinc sulphate.
Field experiments with mustard plant were conducted to study the
effectiveness of soil application of zinc sulphate and biofertilizer at
0, 10, 20, 30, 40, 50 days after sowing. Plant height and condition of
plant was found to be increased significantly using a mixture of
biofertilizer and zinc sulphate than other treatments after 40 days
sowing. Three treatments were also used in this field experiment such
as bacteria only, zinc sulphate only and mixture of biofertilizer and
zinc sulphate. The treatment using a mixture of zinc sulphate and
biofertilizer had the best yield (4688.008 kg/ha) within 50 days of
sowing and performed better than other treatments. Field experiment
using zinc sulphate only was second best yield (3380.75Kg/ha) and
biofertilizer only treatment gave (2639.04kg/ha).
Abstract: Prior to the use of detectors, characteristics
comparison study was performed and baseline established. In patient
specific QA, the portal dosimetry mean values of area gamma,
average gamma and maximum gamma were 1.02, 0.31 and 1.31 with
standard deviation of 0.33, 0.03 and 0.14 for IMRT and the
corresponding values were 1.58, 0.48 and 1.73 with standard
deviation of 0.31, 0.06 and 0.66 for VMAT. With ImatriXX 2-D
array system, on an average 99.35% of the pixels passed the criteria
of 3%-3 mm gamma with standard deviation of 0.24 for dynamic
IMRT. For VMAT, the average value was 98.16% with a standard
deviation of 0.86. The results showed that both the systems can be
used in patient specific QA measurements for IMRT and VMAT.
The values obtained with the portal dosimetry system were found to
be relatively more consistent compared to those obtained with
ImatriXX 2-D array system.
Abstract: In this paper, a decision aid method for preoptimization
is presented. The method is called “negotiation", and it
is based on the identification, formulation, modeling and use of
indicators defined as “negotiation indicators". These negotiation
indicators are used to explore the solution space by means of a classbased
approach. The classes are subdomains for the negotiation
indicators domain. They represent equivalent cognitive solutions in
terms of the negotiation indictors being used. By this method, we
reduced the size of the solution space and the criteria, thus aiding the
optimization methods. We present an example to show the method.
Abstract: The purposes of this study were as follows to evaluate
the economic value of Phu Kradueng National Park by the travel cost
method (TCM) and the contingent valuation method (CVM) and to
estimate the demand for traveling and the willingness to pay. The
data for this study were collected by conducting two large scale
surveys on users and non-users. A total of 1,016 users and 1,034
non-users were interviewed. The data were analyzed using multiple
linear regression analysis, logistic regression model and the
consumer surplus (CS) was the integral of demand function for trips.
The survey found, were as follows:
1)Using the travel cost method which provides an estimate of direct
benefits to park users, we found that visitors- total willingness to pay
per visit was 2,284.57 bath, of which 958.29 bath was travel cost,
1,129.82 bath was expenditure for accommodation, food, and
services, and 166.66 bath was consumer surplus or the visitors -net
gain or satisfaction from the visit (the integral of demand function for
trips).
2) Thai visitors to Phu Kradueng National Park were further willing
to pay an average of 646.84 bath per head per year to ensure the
continued existence of Phu Kradueng National Park and to preserve
their option to use it in the future.
3) Thai non-visitors, on the other hand, are willing to pay an average
of 212.61 bath per head per year for the option and existence value
provided by the Park.
4) The total economic value of Phu Kradueng National Park to Thai
visitors and non-visitors taken together stands today at 9,249.55
million bath per year.
5) The users- average willingness to pay for access to Phu Kradueng
National Park rises
from 40 bath to 84.66 bath per head per trip for improved services
such as road improvement, increased cleanliness, and upgraded
information.
This paper was needed to investigate of the potential market
demand for bio prospecting in Phu Kradueng national Park and to
investigate how a larger share of the economic benefits of tourism
could be distributed income to the local residents.
Abstract: This paper is described one of the intelligent control method in Autonomous systems, which is called fuzzy control to correct the three wheel omnidirectional robot movement while it make mistake to catch the target. Fuzzy logic is especially advantageous for problems that can not be easily represented by mathematical modeling because data is either unavailable, incomplete or the process is too complex. Such systems can be easily up grated by adding new rules to improve performance or add new features. In many cases , fuzzy control can be used to improve existing traditional controller systems by adding an extra layer of intelligence to the current control method. The fuzzy controller designed here is more accurate and flexible than the traditional controllers. The project is done at MRL middle size soccer robot team.
Abstract: In this paper, multilayered coreless printed circuit
board (PCB) step-down power transformers for DC-DC converter
applications have been designed, manufactured and evaluated. A set
of two different circular spiral step-down transformers were
fabricated in the four layered PCB. These transformers have been
modelled with the assistance of high frequency equivalent circuit and
characterized with both sinusoidal and square wave excitation. This
paper provides the comparative results of these two different
transformers in terms of their resistances, self, leakage, mutual
inductances, coupling coefficient and also their energy efficiencies.
The operating regions for optimal performance of these transformers
for power transfer applications are determined. These transformers
were tested for the output power levels of about 30 Watts within the
input voltage range of 12-50 Vrms. The energy efficiency for these
step down transformers is observed to be in the range of 90%-97% in
MHz frequency region.
Abstract: The problem on the conservation programme of the Royal Thai Navy Sea Turtle Nursery, Phang-nga Province, Thailand is high mortality rate of juvenile green sea turtle (Cheloniamydas) on nursing period. So, during May to October 2012, postmortem examinations of juvenile green sea turtle were performed to determine the causes of dead. Fresh tissues of postmortem of 15 juvenile green sea turtles (1-3 months old) were investigated using paraffin section technique. The results showed normal ultrastructure of all tissue organs. These instances reviewed the health and stability of the environments in which juvenile green sea turtles live and concern for the survival rate. The present article also provides guidance for a review of the biology, guidelines for appropriate postmortem tissue, normal histology and sampling collection and procedures. The data also provides information for conservation of this endangered species in term of acknowledging and encouraging people to protect the animals and their habitats in nature.
Abstract: Currently, the demand for marine and fisheries commodity in Yogyakarta, Indonesia continues to increase. The existing condition shows that the aquaculture supply cannot be supplied by Yogyakarta region itself, but still need to be supported by regions outside Yogyakarta. The effort to optimize the market is initiated by reviewing and designing the supply chain of production and trade of aquaculture commodity in order to create the implementation of aquaculture production and trade commodity optimally. This formulated supply chain model indicates 4 performance indicators of measurable success in terms of: (1) efficiency; (2) flexibility; (3) responsiveness; and (4) quality. These indicators had been exercised as the success benchmarks for priority marketing management in local level as well as national level. The result of this research indicates that if the catfish fishery system is managed as business as usual then the catfish demand in Yogyakarta region will experience to increase in the future. The increase of demand is inline with the increase of number of people in Yogyakarta and also the fluctuation of catfish consumption per capita. The highest production of catfish will experience in the third year approximately 30,118 tons. Other result of the research indicates that the catfish demand in Yogyakarta region cannot be supplied yet from the local region. Therefore, to fulfill the supply from outside Yogyakarta region, the local farmers should improve the supply through land extension. The fluctuation of commodity price will experience in the future annually and the catfish supply from outside Yogyakarta region will be lowering the price in the market.