Abstract: The influence of extrusion parameters on surface
quality and properties of AA6061+x% vol. SiC (x = 0; 2,5; 5; 7,5;10)
composites was discussed in this paper. The averages size of
AA6061 and SiC particles were 10.6 μm and 0.42 μm, respectively.
Two series of composites (I - compacts were preheated at extrusion
temperature through 0.5 h and cooled by water directly after process;
II - compacts were preheated through 3 hours and were not cooled)
were consolidated via powder metallurgy processing and extruded by
KoBo method. High values of density for both series of composites
were achieved. Better surface quality was observed for II series of
composites. Moreover, for these composites lower (compared to I
series) but more uniform strength properties over the cross-section of
the bar were noticed. Microstructure and Young-s modulus
investigations were made.
Abstract: Based on the classical algorithm LSQR for solving (unconstrained) LS problem, an iterative method is proposed for the least-squares like-minimum-norm symmetric solution of AXB+CYD=E. As the application of this algorithm, an iterative method for the least-squares like-minimum-norm biymmetric solution of AXB=E is also obtained. Numerical results are reported that show the efficiency of the proposed methods.
Abstract: This paper proposes the requirements and design of
RFID based system for SFC (Shop Floor Control) in order to achieve
the factory real time controllability, Allowing to develop EManufacturing
System. The detailed logical specifications of the core
functions and the design diagrams of RFID based system are
developed. Then RFID deployment in E-Manufacturing systems is
investigated..
Abstract: Optical Bursts Switching (OBS) is a relatively new
optical switching paradigm. Contention and burst loss in OBS
networks are major concerns. To resolve contentions, an interesting
alternative to discarding the entire data burst is to partially drop the
burst. Partial burst dropping is based on burst segmentation concept
that its implementation is constrained by some technical challenges,
besides the complexity added to the algorithms and protocols on both
edge and core nodes. In this paper, the burst segmentation concept is
investigated, and an implementation scheme is proposed and
evaluated. An appropriate dropping policy that effectively manages
the size of the segmented data bursts is presented. The dropping
policy is further supported by a new control packet format that
provides constant transmission overhead.
Abstract: The Virtual Reality (VR) is becoming increasingly
important for business, education, and entertainment, therefore VR
technology have been applied for training purposes in the areas of
military, safety training and flying simulators. In particular, the
superior and high reliability VR training system is very important in
immersion. Manipulation training in immersive virtual environments
is difficult partly because users must do without the hap contact with
real objects they rely on in the real world to orient themselves and
their manipulated.
In this paper, we create a convincing questionnaire of immersion
and an experiment to assess the influence of immersion on
performance in VR training system. The Immersion Questionnaire
(IQ) included spatial immersion, Psychological immersion, and
Sensory immersion. We show that users with a training system
complete visual attention and detection of signals. Twenty subjects
were allocated to a factorial design consisting of two different VR
systems (Desktop VR and Projector VR). The results indicated that
different VR representation methods significantly affected the
participants- Immersion dimensions.
Abstract: Different agricultural waste peels were assessed for
their suitability to be used as primary substrates for the
bioremediation of free cyanide (CN-) by a cyanide-degrading fungus
Aspergillus awamori isolated from cyanide containing wastewater.
The bioremediated CN- concentration were in the range of 36 to 110
mg CN-/L, with Orange (C. sinensis) > Carrot (D. carota) > Onion
(A. cepa) > Apple (M. pumila), being chosen as suitable substrates
for large scale CN- degradation processes due to: 1) the high
concentration of bioremediated CN-, 2) total reduced sugars released
into solution to sustain the biocatalyst, and 3) minimal residual NH4-
N concentration after fermentation. The bioremediation rate constants
(k) were 0.017h-1 (0h < t < 24h), with improved bioremediation rates
(0.02189h-1) observed after 24h. The averaged nitrilase activity was
~10 U/L.
Abstract: This paper intends to identify the ethnic Kazakhstani
Koreans- political process of identity formation by exploring their
narrative and practice about the state language represented in the
course of their becoming the new citizens of a new independent state.
The Russophone Kazakhstani Koreans- inability to speak the official
language of their affiliated state is considered there as dissatisfying the
basic requirement of citizens of the independent state, so that they are
becoming marginalized from the public sphere. Their contradictory
attitude that at once demonstrates nominal reception and practical
rejection of the obligatory state language unveils a high barrier inside
between their self-language and other-language. In this paper, the
ethnic Korean group-s conflicting linguistic identity is not seen as a
free and simple choice, but as a dynamic struggle and political process
in which the subject-s past experiences and memories intersect with
the external elements of pressure.
Abstract: The response of growth and yield of rainfed-chickpea
to population density should be evaluated based on long-term
experiments to include the climate variability. This is achievable just
by simulation. In this simulation study, this evaluation was done by
running the CYRUS model for long-term daily weather data of five
locations in Iran. The tested population densities were 7 to 59 (with
interval of 2) stands per square meter. Various functions, including
quadratic, segmented, beta, broken linear, and dent-like functions,
were tested. Considering root mean square of deviations and linear
regression statistics [intercept (a), slope (b), and correlation
coefficient (r)] for predicted versus observed variables, the quadratic
and broken linear functions appeared to be appropriate for describing
the changes in biomass and grain yield, and in harvest index,
respectively. Results indicated that in all locations, grain yield tends
to show increasing trend with crowding the population, but
subsequently decreases. This was also true for biomass in five
locations. The harvest index appeared to have plateau state across
low population densities, but decreasing trend with more increasing
density. The turning point (optimum population density) for grain
yield was 30.68 stands per square meter in Isfahan, 30.54 in Shiraz,
31.47 in Kermanshah, 34.85 in Tabriz, and 32.00 in Mashhad. The
optimum population density for biomass ranged from 24.6 (in
Tabriz) to 35.3 stands per square meter (Mashhad). For harvest index
it varied between 35.87 and 40.12 stands per square meter.
Abstract: One of the determinants of a firm-s prosperity is the
customers- perceived service quality and satisfaction. While service
quality is wide in scope, and consists of various dimensions, there
may be differences in the relative importance of these dimensions in
affecting customers- overall satisfaction of service quality.
Identifying the relative rank of different dimensions of service quality
is very important in that it can help managers to find out which
service dimensions have a greater effect on customers- overall
satisfaction. Such an insight will consequently lead to more effective
resource allocation which will finally end in higher levels of
customer satisfaction. This issue – despite its criticality- has not
received enough attention so far. Therefore, using a sample of 240
bank customers in Iran, an artificial neural network is developed to
address this gap in the literature. As customers- evaluation of service
quality is a subjective process, artificial neural networks –as a brain
metaphor- may appear to have a potentiality to model such a
complicated process. Proposing a neural network which is able to
predict the customers- overall satisfaction of service quality with a
promising level of accuracy is the first contribution of this study. In
addition, prioritizing the service quality dimensions in affecting
customers- overall satisfaction –by using sensitivity analysis of
neural network- is the second important finding of this paper.
Abstract: The multi-agent system for processing Bio-signals
will help the medical practitioners to have a standard examination
procedure stored in web server. Web Servers supporting any standard
Search Engine follow all possible combinations of the search
keywords as an input by the user to a Search Engine. As a result, a
huge number of Web-pages are shown in the Web browser. It also
helps the medical practitioner to interact with the expert in the field
his need in order to make a proper judgment in the diagnosis phase
[3].A web server uses a web server plug in to establish and
maintained the medical practitioner to make a fast analysis. If the
user uses the web server client can get a related data requesting their
search. DB agent, EEG / ECG / EMG agents- user placed with
difficult aspects for updating medical information-s in web server.
Abstract: A preliminary evaluation of the feasibility of installing small wind turbines on offshore oil and gas extraction platforms is presented. Some aerodynamic considerations are developed in order to determine the best rotor architecture to exploit the wind potential on such installations, assuming that wind conditions over the platforms are similar to those registered on the roofs of urban buildings. Economical considerations about both advantages and disadvantages of the exploitation of wind energy on offshore extraction platforms with respect to conventional offshore wind plants, is also presented. Finally, wind charts of European offshore winds are presented together with a map of the major offshore installations.
Abstract: Marketing is an essential issue to the survival of any
real estate company in Turkey. There are some factors which are
constraining the achievements of the marketing and sales strategies in
the Turkey real estate industry. This study aims to identify and
prioritise the most significant constraints to marketing in real estate
sector and new strategies based on those constraints. This study is
based on survey method, where the respondents such as credit
counsellors, real estate investors, consultants, academicians and
marketing representatives in Turkey were asked to rank forty seven
sub-factors according to their levels of impact. The results of Multiattribute
analytical technique indicated that the main subcomponents
having impact on marketing in real estate sector are interest rates, real
estate credit availability, accessibility, company image and consumer
real income, respectively. The identified constraints are expected to
guide the marketing team in a sales-effective way.
Abstract: This article concerned with the translation of Quranic
verses to Braille symbols, by using Visual basic program. The
system has the ability to translate the special vibration for the Quran.
This study limited for the (Noun + Scoon) vibrations. It builds on an
existing translation system that combines a finite state machine with
left and right context matching and a set of translation rules. This
allows to translate the Arabic language from text to Braille symbols
after detect the vibration for the Quran verses.
Abstract: Manganese steel (Hadfield) is one of the important
alloys in industry due to its special properties. High work hardening
ability with appropriate toughness and ductility are the properties that
caused this alloy to be used in wear resistance parts and in high
strength condition. Heat treatment is the main process through which
the desired mechanical properties and microstructures are obtained in
Hadfield steel. In this study various heat treatment cycles, differing in
austenising temperature, time and quenching solution are applied. For
this purpose, the same samples of manganese steel was heat treated in
9 different cycles, and then the mechanical properties and
microstructures were investigated. Based on the results of the study,
the optimum heat treatment cycle was obtained.
Abstract: A multi-agent system is developed here to predict
monthly details of the upcoming peak of the 24th solar magnetic
cycle. While studies typically predict the timing and magnitude of
cycle peaks using annual data, this one utilizes the unsmoothed
monthly sunspot number instead. Monthly numbers display more
pronounced fluctuations during periods of strong solar magnetic
activity than the annual sunspot numbers. Because strong magnetic
activities may cause significant economic damages, predicting
monthly variations should provide different and perhaps helpful
information for decision-making purposes. The multi-agent system
developed here operates in two stages. In the first, it produces twelve
predictions of the monthly numbers. In the second, it uses those
predictions to deliver a final forecast. Acting as expert agents, genetic
programming and neural networks produce the twelve fits and
forecasts as well as the final forecast. According to the results
obtained, the next peak is predicted to be 156 and is expected to
occur in October 2011- with an average of 136 for that year.
Abstract: The Brazilian legislation has only established
diagnostic reference levels (DRLs) in terms of Multiple Scan
Average Dose (MSAD) as a quality control parameter for computed
tomography (CT) scanners. Compliance with DRLs can be verified
by measuring the Computed Tomography Kerma Index (Ca,100) with
a pencil ionization chamber or by obtaining the kerma distribution in
CT scans with radiochromic films or rod shape lithium fluoride
termoluminescent dosimeters (TLD-100). TL dosimeters were used
to record kerma profiles and to determine MSAD values of a Bright
Speed model GE CT scanner. Measurements were done with
radiochromic films and TL dosimeters distributed in cylinders
positioned in the center and in four peripheral bores of a standard
polymethylmethacrylate (PMMA) body CT dosimetry phantom.
Irradiations were done using a protocol for adult chest. The
maximum values were found at the midpoint of the longitudinal axis.
The MSAD values obtained with three dosimetric techniques were
compared.
Abstract: Interventional cardiologists are at greater risk from
radiation exposure as a result of the procedures they undertake than
most other medical specialists. A study was performed to evaluate
operator dose during interventional cardiology procedures and to
establish methods of operator dose reduction with a radiation
protective device. Different procedure technique and use of
protective tools can explain big difference in the annual equivalent
dose received by the professionals. Strategies to prevent and
monitor radiation exposure, advanced protective shielding and
effective radiation monitoring methods should be applied.
Abstract: This work presents a low-cost and eco-friendly
building material named Agrostone panel. Africa-s urban population
is growing at an annual rate of 2.8% and 62% of its population will
live in urban areas by 2050. As a consequence, many of the least
urbanized and least developed African countries- will face serious
challenges in providing affordable housing to the urban dwellers.
Since the cost of building materials accounts for the largest
proportion of the overall construction cost, innovating low-cost
building material is vital. Agrostone panel is used in housing projects
in Ethiopia. It uses raw materials of agricultural/industrial wastes
and/or natural minerals as a filler, magnesium-based chemicals as a
binder and fiberglass as reinforcement. Agrostone panel reduces the
cost of wall construction by 50% compared with the conventional
building materials. The pros and cons of Agrostone panel as well as
the use of other waste materials as a raw material to make the panel
more sustainable, low-cost and better properties are discussed.
Abstract: An autonomous environmental monitoring system
(Smart Landfill) has been constructed for the quantitative
measurement of the components of landfill gas found at borehole
wells at the perimeter of landfill sites. The main components of
landfill gas are the greenhouse gases, methane and carbon dioxide
and have been monitored in the range 0-5 % volume. This monitoring
system has not only been tested in the laboratory but has been
deployed in multiple field trials and the data collected successfully
compared with on-site monitors. This success shows the potential of
this system for application in environments where reliable gas
monitoring is crucial.
Abstract: This article proposes a new methodology to be used by SMEs (Small and Medium enterprises) to characterize their performance in quality, highlighting weaknesses and area for improvement. The methodology aims to identify the principal causes of quality problems and help to prioritize improvement initiatives. This is a self-assessment methodology that intends to be easy to implement by companies with low maturity level in quality. The methodology is organized in six different steps which includes gathering information about predetermined processes and subprocesses of quality management, defined based on the well-known Juran-s trilogy for quality management (Quality planning, quality control and quality improvement) and, predetermined results categories, defined based on quality concept. A set of tools for data collecting and analysis, such as interviews, flowcharts, process analysis diagrams and Failure Mode and effects Analysis (FMEA) are used. The article also presents the conclusions obtained in the application of the methodology in two cases studies.