Abstract: This paper examines the factors, which determine
R&D outsourcing behaviour at Japanese firms, from the viewpoints of
transaction cost and strategic management, since the latter half of the
1990s. This study uses empirical analysis, which involves the
application of large-sample data. The principal findings of this paper
are listed below. Firms that belong to a wider corporate group are more
active in executing R&D outsourcing activities. Diversification
strategies such as the expansion of product and sales markets have a
positive effect on the R&D outsourcing behaviour of firms. Moreover,
while quantitative R&D resources have positive influences on R&D
outsourcing, qualitative indices have no effect. These facts suggest
that R&D outsourcing behaviour of Japanese firms are consistent with
the two perspectives of transaction cost and strategic management.
Specifically, a conventional corporate group network plays an
important role in R&D outsourcing behaviour. Firms that execute
R&D outsourcing leverage 'old' networks to construct 'new' networks
and use both networks properly.
Abstract: In this study three commercial semiconductor devices
were characterized in the laboratory for computed tomography
dosimetry: one photodiode and two phototransistors. It was evaluated
four responses to the irradiation: dose linearity, energy dependence,
angular dependence and loss of sensitivity after X ray exposure. The
results showed that the three devices have proportional response with
the air kerma; the energy dependence displayed for each device
suggests that some calibration factors would be applied for each one;
the angular dependence showed a similar pattern among the three
electronic components. In respect to the fourth parameter analyzed,
one phototransistor has the highest sensitivity however it also showed
the greatest loss of sensitivity with the accumulated dose. The
photodiode was the device with the smaller sensitivity to radiation,
on the other hand, the loss of sensitivity after irradiation is negligible.
Since high accuracy is a desired feature for a dosimeter, the
photodiode can be the most suitable of the three devices for
dosimetry in tomography. The phototransistors can also be used for
CT dosimetry, however it would be necessary a correction factor due
to loss of sensitivity with accumulated dose.
Abstract: In order to obtaining the dynamic evolution image of Tungsten array for foam padding, and to research the form of interaction between Tungsten plasma and foam column, a shadow imaging system of four-frame ultraviolet probe laser (266nm)has been designed on 1MA pulse power device. The time resolution of the system is 2.5ns, and static space resolution is superior to 70μm. The radial shadowgraphy image reveals the whole process from the melting and expansion of solid wire to the interaction of the precursor plasma and the foam, from the pinch to rebound inflation. The image shows the continuous interaction of Tungsten plasma and foam in a form of “Raining" within a time of about 50ns, the plasma shell structure has not been found in the whole period of pinch. The quantitative analysis indicates the minimum pinching speed of the foam column is 1.0×106cm/s, and maximum pinching speed is 6.0×106cm/s, and the axial stagnation diameter is approx 1mm.
Abstract: Artemisinin is a potential antimalarial drug effective
against the multidrug resistant forms of Malarial Parasites. The
current production of artemisinin is insufficient to meet the global
demand. In the present study microbial biotransformation of
arteannuin B, a biogenetic precursor of artemisinin to the later has
been investigated. Screening studies carried out on several soil borne
microorganisms have yielded one novel species with the
bioconversion ability. Crude cell free extract of 72h old culture of the
isolate had shown the bioconversion activity. On incubation with the
substrate arteannuin B, crude cell free extract of the isolate had
shown a bioconversion of 18.54% to artemisinin on molar basis with
a specific activity of 0.18 units/mg.
Abstract: An application framework provides a reusable
design and implementation for a family of software systems.
Frameworks are introduced to reduce the cost of a product line
(i.e., family of products that share the common features). Software
testing is a time consuming and costly ongoing activity during the
application software development process. Generating reusable test
cases for the framework applications at the framework
development stage, and providing and using the test cases to test
part of the framework application whenever the framework is used
reduces the application development time and cost considerably.
Framework Interface Classes (FICs) are classes introduced by
the framework hooks to be implemented at the application
development stage. They can have reusable test cases generated at
the framework development stage and provided with the
framework to test the implementations of the FICs at the
application development stage. In this paper, we conduct a case
study using thirteen applications developed using three
frameworks; one domain oriented and two application oriented.
The results show that, in general, the percentage of the number of
FICs in the applications developed using domain frameworks is, on
average, greater than the percentage of the number of FICs in the
applications developed using application frameworks.
Consequently, the reduction of the application unit testing time
using the reusable test cases generated for domain frameworks is,
in general, greater than the reduction of the application unit testing
time using the reusable test cases generated for application
frameworks.
Abstract: In this paper, a near lossless image coding scheme
based on Orthogonal Polynomials Transform (OPT) has been
presented. The polynomial operators and polynomials basis operators
are obtained from set of orthogonal polynomials functions for the
proposed transform coding. The image is partitioned into a number of
distinct square blocks and the proposed transform coding is applied to
each of these individually. After applying the proposed transform
coding, the transformed coefficients are rearranged into a sub-band
structure. The Embedded Zerotree (EZ) coding algorithm is then
employed to quantize the coefficients. The proposed transform is
implemented for various block sizes and the performance is
compared with existing Discrete Cosine Transform (DCT) transform
coding scheme.
Abstract: The operating control parameters of injection
flushing type of electrical discharge machining process on stainless
steel 304 workpiece with copper tools are being optimized
according to its individual machining characteristic i.e. material
removal rate (MRR). Lower MRR during EDM machining process
may decrease its- machining productivity. Hence, the quality
characteristic for MRR is set to higher-the-better to achieve the
optimum machining productivity. Taguchi method has been used
for the construction, layout and analysis of the experiment for each
of the machining characteristic for the MRR. The use of Taguchi
method in the experiment saves a lot of time and cost of preparing
and machining the experiment samples. Therefore, an L18
Orthogonal array which was the fundamental component in the
statistical design of experiments has been used to plan the
experiments and Analysis of Variance (ANOVA) is used to
determine the optimum machining parameters for this machining
characteristic. The control parameters selected for this
optimization experiments are polarity, pulse on duration, discharge
current, discharge voltage, machining depth, machining diameter
and dielectric liquid pressure. The result had shown that the higher
the discharge voltage, the higher will be the MRR.
Abstract: One of the most important issues in multi-criteria decision analysis (MCDA) is to determine the weights of criteria so that all alternatives can be compared based on the collective performance of criteria. In this paper, one of popular methods in data envelopment analysis (DEA) known as common weights (CWs) is used to determine the weights in MCDA. Two frontiers named ideal and anti-ideal frontiers, instead of ideal and anti-ideal alternatives, are defined based on two new proposed CWs models. Ideal and antiideal frontiers are more flexible than that of alternatives. According to the optimal solutions of these two models, the distances of an alternative from the ideal and anti-ideal frontiers are derived. Then, a relative distance is introduced to measure the value of each alternative. The suggested models are linear and despite weight restrictions are feasible. An example is presented for explaining the method and for comparing to the existing literature.
Abstract: New software protection product called “Obfuscation
Studio" is presented in the paper. Several obfuscating modules that
are already implemented are described. Some theoretical data is
presented, that shows the potency and effectiveness of described
obfuscation methods. “Obfuscation Studio" is being implemented for
protecting programs written for .NET platform, but the described
methods can also be interesting for other applications.
Abstract: The nanotechnology based on epitaxial systems
includes single or arranged misfit dislocations. In general, whatever
is the type of dislocation or the geometry of the array formed by the
dislocations; it is important for experimental studies to know exactly
the stress distribution for which there is no analytical expression [1,
2]. This work, using a numerical analysis, deals with relaxation of
epitaxial layers having at their interface a periodic network of edge
misfit dislocations. The stress distribution is estimated by using
isotropic elasticity. The results show that the thickness of the two
sheets is a crucial parameter in the stress distributions and then in the
profile of the two sheets.
A comparative study between the case of single dislocation and
the case of parallel network shows that the layers relaxed better when
the interface is covered by a parallel arrangement of misfit.
Consequently, a single dislocation at the interface produces an
important stress field which can be reduced by inserting a parallel
network of dislocations with suitable periodicity.
Abstract: Over the course of the past century, the global
automotive industry-s stance towards safety has evolved from one of
contempt to one nearing reverence. A suspension system that
provides safe handling and cornering capabilities can, with the help
of an efficient braking system, improve safety to a large extent. The
aim of this research is to propose a new automotive brake rotor
design and to compare it with automotive vented disk rotor. Static
structural and transient thermal analysis have been carried out on the
vented disk rotor and proposed rotor designs to evaluate and compare
their performance. Finite element analysis was employed for both
static structural and transient thermal analysis. Structural analysis
was carried out to study the stress and deformation pattern of the
rotors under extreme loads. Time varying temperature load was
applied on the rotors and the temperature distribution was analysed
considering cooling parameters (convection and radiation). This
dissertation illustrates the use of Finite Element Methods to examine
models, concluding with a comparative study of the proposed rotor
design and the conventional vented disk rotor for structural stability
and thermal efficiency.
Abstract: Polarization-interferometric nonlinear confocal
microscopy is proposed for measuring a nano-sized particle with
optical anisotropy. The anisotropy in the particle was
spectroscopically imaged through a three-dimensional distribution of
third-order nonlinear dielectric polarization photoinduced.
Abstract: An attempt has been made to beneficiate the Indian
coking coal fines by a combination of Spiral, flotation and Oleo
Flotation processes. Beneficiation studies were also carried out on -
0.5mm coal fines using flotation and oleo flotation by splitting at size
0.063mm.Size fraction of 0.5mm-0.063mm and -0.063mm size were
treated in flotation and Oleo flotation respectively. The washability
studies on the fraction 3-0.5 mm indicated that good separation may
be achieved when it is fed in a spiral. Combined product of Spiral,
Flotation and Oleo Flotation has given a significant yield at
acceptable ash%. Studies were also conducted to see the dewatering
of combined product by batch type centrifuge. It may further be
suggested that combination of different processes may be used to
treat the -3 mm fraction in an integrated manner to achieve the yield
at the desired ash level. The treatment of the 3/1 mm -0.5 mm size
fraction by spiral,-0.5-0.63 mm by conventional froth flotation and -
0.063 fractions by oleo flotation may provide a complete solution of
beneficiation and dewatering of coal fines, and can effectively
address the environmental problems caused by coal fines.
Abstract: The High Voltage (HV) transmission mains into the community necessitate earthing design to ensure safety compliance of the system. Concrete poles are widely used within HV transmission mains; which could have an impact on the earth grid impedance and input impedance of the system from the fault point of view. This paper provides information on concrete pole earthing to enhance the split factor of the system; further, it discusses the deployment of concrete structures in high soil resistivity area to reduce the earth grid system of the plant. This paper introduces the cut off soil resistivity SC ρ when replacing timber poles with concrete ones.
Abstract: After Apple's first introduction its smart phone, iPhone
in the end of 2009 in Korea, the number of Korean smarphone users
had been rapidly increasing so that the half of Korean population
became smart phone users as of February, 2012. Currently, smart
phones are positioned as a major digital media with powerful
influences in Korea. And, now, Koreans are leaning new information,
enjoying games and communicating other people every time and
everywhere. As smart phone devices' performances increased, the
number of usable services became more while adequate GUI
developments are required to implement various functions with smart
phones. The strategy to provide similar experiences on smart phones
through familiar features based on employment of existing media's
functions mostly contributed to smart phones' popularization in
connection with smart phone devices' iconic GUIs.
The spread of Smart phone increased mobile web accesses.
Therefore, the attempts to implement PC's web in the smart phone's
web are continuously made. The mobile web GUI provides familiar
experiences to users through designs adequately utilizing the smart
phone's GUIs. As the number of users familiarized to smart phones
and mobile web GUIs, opposite to reversed remediation from many
parts of PCs, PCs are starting to adapt smart phone GUIs.
This study defines this phenomenon as the reversed remediation,
and reviews the reversed remediation cases of Smart phone GUI'
characteristics of PCs. For this purpose, the established study issues
are as under:
· what is the reversed remediation?
· what are the smart phone GUI's characteristics?
· what kind of interrelationship exist s between the smart phone and
PC's web site?
It is meaningful in the forecast of the future GUI's change by
understanding of characteristics in the paradigm changes of PC and
smart phone's GUI designs. This also will be helpful to establish
strategies for digital devices' development and design.
Abstract: It is well known that enhancing interfacial adhesion
between inorganic filler and matrix resin in a composite lead to
favorable properties such as excellent mechanical properties, high
thermal resistance, prominent electric insulation, low expansion
coefficient, and so on. But it should be avoided that much excess of
coupling agent is reacted due to a negative impact of their final
composite-s properties. There is no report to achieve classification of
the bonding state excepting investigation of coating layer thickness.
Therefore, the analysis of the bonding state of the coupling agent
reacted with the filler surface such as BN particles with less functional
group and silica particles having much functional group was
performed by thermal gravimetric analysis and pyrolysis GC/MS. The
reacted number of functional groups on the silane-coupling agent was
classified as a result of the analysis. Thus, we succeeded in classifying
the reacted number of the functional groups as a result of this study.
Abstract: For investigations of electromagnetic field
distributions in biological structures by Finite Element Method
(FEM), a method for automatic 3D model building of human
anatomical objects is developed. Models are made by meshed
structures and specific electromagnetic material properties for each
tissue type. Mesh is built according to specific FEM criteria for
achieving good solution accuracy. Several FEM models of
anatomical objects are built. Formulation using magnetic vector
potential and scalar electric potential (A-V, A) is used for modeling
of electromagnetic fields in human tissue objects. The developed
models are suitable for investigations of electromagnetic field
distributions in human tissues exposed in external fields during
magnetic stimulation, defibrillation, impedance tomography etc.
Abstract: Due to its special data structure and manipulative principle, Object-Oriented Database (OODB) has a particular security protection and authorization methods. This paper first introduces the features of security mechanism about OODB, and then talked about authorization checking process of OODB. Implicit authorization mechanism is based on the subject hierarchies, object hierarchies and access hierarchies of the security authorization modes, and simplifies the authorization mode. In addition, to combine with other authorization mechanisms, implicit authorization can make protection on the authorization of OODB expediently and effectively.
Abstract: The study attempted to identify the dominant
intelligences of athletes by comparing the developmental differences
of multiple intelligences between athletes and non-athletes. The
weekly specialized training hours and years of specialized training
was examined to see how it can predict the dominant intelligence with
the age factor controlled. There were 355 participants in the research
(202 athletes and 153 non-athletes). Collected data were analyzed with
one-way MANOVA and multiple hierarchical regression. The results
suggested the dominant intelligences of athletes were Interpersonal
Intelligence, Bodily-Kinesthetic Intelligence, and Intrapersonal
Intelligence. The weekly specialized training hours and years of
specialized training could effectively predict the Interpersonal
Intelligence, Bodily-Kinesthetic Intelligence, and Intrapersonal
Intelligence of athletes. The author suggested the future studies could
focus on the theory construction of weekly specialized training and
years of specialized training. Also, the studies on using “Bridge
strategy" by the athletes to guide disadvantage intelligences with
dominant intelligences are highly valued.
Abstract: Aim. We have introduced the notion of order to multinormed spaces and countable union spaces and their duals. The topology of bounded convergence is assigned to the dual spaces. The aim of this paper is to develop the theory of ordered topological linear
spaces La,b, L(w, z), the dual spaces of ordered multinormed spaces
La,b, ordered countable union spaces L(w, z), with the topology of bounded convergence assigned to the dual spaces. We apply Laplace transformation to the ordered linear space of Laplace transformable
generalized functions. We ultimately aim at finding solutions to nonhomogeneous
nth order linear differential equations with constant
coefficients in terms of generalized functions and comparing different
solutions evolved out of different initial conditions.
Method. The above aim is achieved by
• Defining the spaces La,b, L(w, z).
• Assigning an order relation on these spaces by identifying a
positive cone on them and studying the properties of the cone.
• Defining an order relation on the dual spaces La,b, L(w, z) of La,b, L(w, z) and assigning a topology to these dual spaces which makes the order dual and the topological dual the same. • Defining the adjoint of a continuous map on these spaces
and studying its behaviour when the topology of bounded
convergence is assigned to the dual spaces.
• Applying the two-sided Laplace Transformation on the ordered
linear space of generalized functions W and studying some
properties of the transformation which are used in solving
differential equations.
Result. The above techniques are applied to solve non-homogeneous
n-th order linear differential equations with constant coefficients in
terms of generalized functions and to compare different solutions of the differential equation.