Abstract: The selective wet-etching of amorphous and
crystalline region of Sb20Se80 thin films was carried out using organic
based solution e.g. amines. We report the development of an in situ
real-time method to study the wet chemical etching process of thin
films. Characterization of the structure and surface of films studied
by X-ray diffraction, SEM and EBSD methods has been done and
potential application suggested.
Abstract: The composition, vapour pressure, and heat capacity
of nine biodiesel fuels from different sources were measured. The
vapour pressure of the biodiesel fuels is modeled assuming an ideal
liquid phase of the fatty acid methyl esters constituting the fuel. New
methodologies to calculate the vapour pressure and ideal gas and
liquid heat capacities of the biodiesel fuel constituents are proposed.
Two alternative optimization scenarios are evaluated: 1) vapour
pressure only; 2) vapour pressure constrained with liquid heat
capacity. Without physical constraints, significant errors in liquid
heat capacity predictions were found whereas the constrained
correlation accurately fit both vapour pressure and liquid heat
capacity.
Abstract: In switch mode power inverters, small sized inverters
can be obtained by increasing the switching frequency. Switching
frequency increment causes high driver losses. Also, high dt
di
and
dt
dv
produced by the switching action creates high Electromagnetic
Interference (EMI) and Radio Frequency Interference (RFI). In this
paper, a series half bridge series resonant inverter circuit is simulated
and evaluated practically to demonstrate the turn-on and turn-off
conditions during zero or close to zero voltage switching. Also, the
reverse recovery current effects of the body diode of the MOSFETs
were investigated by operating above and below resonant frequency.
Abstract: In order to define a new model of Tunisian foot
sizes and for building the most comfortable shoes, Tunisian
industrialists must be able to offer for their customers products able
to put on and adjust the majority of the target population concerned.
Moreover, the use of models of shoes, mainly from others
country, causes a mismatch between the foot and comfort of the
Tunisian shoes.
But every foot is unique; these models become uncomfortable for
the Tunisian foot. We have a set of measures produced from a
3D scan of the feet of a diverse population (women, men ...) and we
try to analyze this data to define a model of foot specific to the
Tunisian footwear design.
In this paper we propose tow new approaches to modeling a new
foot sizes model. We used, indeed, the neural networks, and specially
the Kohonen network.
Next, we combine neural networks with the concept of half-foot
size to improve the models already found. Finally, it was necessary to
compare the results obtained by applying each approach and we
decide what-s the best approach that give us the most model of foot
improving more comfortable shoes.
Abstract: Social networking is one of the most successful and popular tools to emerge from the Web 2.0 era. However, the increased interconnectivity and access to peoples- personal lives and information has created a plethora of opportunities for the nefarious side of human nature to manifest. This paper categorizes and describes the major types of anti-social behavior and criminal activity that can arise through undisciplined use and/or misuse of social media. We specifically address identity theft, misrepresentation of information posted, cyber bullying, children and social networking, and social networking in the work place. Recommendations are provided for how to reduce the risk of being the victim of a crime or engaging in embarrassing behavior that could irrevocably harm one-s reputation either professionally or personally. We also discuss what responsibilities social networking companies have to protect their users and also what law enforcement and policy makers can do to help alleviate the problems.
Abstract: In this paper parametric analytical studies have been carried out to examine the intrinsic flow physics pertaining to the liftoff time of solid propellant rockets. Idealized inert simulators of solid rockets are selected for numerical studies to examining the preignition chamber dynamics. Detailed diagnostic investigations have been carried out using an unsteady two-dimensional k-omega turbulence model. We conjectured from the numerical results that the altered variations of the igniter jet impingement angle, turbulence level, time and location of the first ignition, flame spread characteristics, the overall chamber dynamics including the boundary layer growth history are having bearing on the time for nozzle flow chocking for establishing the required thrust for the rocket liftoff. We concluded that the altered flow choking time of strap-on motors with the pre-determined identical ignition time at the lift off phase will lead to the malfunctioning of the rocket. We also concluded that, in the light of the space debris, an error in predicting the liftoff time can lead to an unfavorable launch window amounts the satellite injection errors and/or the mission failures.
Abstract: Bus networks design is an important problem in
public transportation. The main step to this design, is determining the
number of required terminals and their locations. This is an especial
type of facility location problem, a large scale combinatorial
optimization problem that requires a long time to be solved.
The genetic algorithm (GA) is a search and optimization technique
which works based on evolutionary principle of natural
chromosomes. Specifically, the evolution of chromosomes due to the
action of crossover, mutation and natural selection of chromosomes
based on Darwin's survival-of-the-fittest principle, are all artificially
simulated to constitute a robust search and optimization procedure.
In this paper, we first state the problem as a mixed integer
programming (MIP) problem. Then we design a new crossover and
mutation for bus terminal location problem (BTLP). We tested the
different parameters of genetic algorithm (for a sample problem) and
obtained the optimal parameters for solving BTLP with numerical try
and error.
Abstract: In a previously developed fast vortex method, the
diffusion of the vortex sheet induced at the solid wall by the no-slip
boundary conditions was modeled according to the approximation
solution of Koumoutsakos and converted into discrete blobs in the
vicinity of the wall. This scheme had been successfully applied to a
simulation of the flow induced with an impulsively initiated circular
cylinder. In this work, further modifications on this vortex method are
attempted, including replacing the approximation solution by the
boundary-element-method solution, incorporating a new algorithm for
handling the over-weak vortex blobs, and diffusing the vortex sheet
circulation in a new way suitable for high-curvature solid bodies. The
accuracy is thus largely improved. The predictions of lift and drag
coefficients for a uniform flow past a NASA airfoil agree well with the
existing literature.
Abstract: One of the key research issues in wireless sensor networks (WSNs) is how to efficiently deploy sensors to cover an area. In this paper, we present a Fishnet Based Dispatch Scheme (FiBDS) with energy aware mobility and interest based sensing angle. We propose two algorithms, one is FiBDS centralized algorithm and another is FiBDS distributed algorithm. The centralized algorithm is designed specifically for the non-time critical applications, commonly known as non real-time applications while the distributed algorithm is designed specifically for the time critical applications, commonly known as real-time applications. The proposed dispatch scheme works in a phase-selection manner. In this in each phase a specific constraint is dealt with according to the specified priority and then moved onto the next phase and at the end of each only the best suited nodes for the phase are chosen. Simulation results are presented to verify their effectiveness.
Abstract: This paper presents the study of induced currents and
temperature distribution in gear heated by induction process using 2D
finite element (FE) model. The model is developed by coupling
Maxwell and heat transfer equations into a multi-physics model. The
obtained results allow comparing the medium frequency (MF) and
high frequency (HF) cases and the effect of machine parameters on
the evolution of induced currents and temperature during heating.
The sensitivity study of the temperature profile is conducted and the
case hardness is predicted using the final temperature profile. These
results are validated using tests and give a good understanding of
phenomena during heating process.
Abstract: One of the main image representations in Mathematical Morphology is the 3D Shape Decomposition Representation, useful for Image Compression and Representation,and Pattern Recognition. The 3D Morphological Shape Decomposition representation can be generalized a number of times,to extend the scope of its algebraic characteristics as much as possible. With these generalizations, the Morphological Shape Decomposition 's role to serve as an efficient image decomposition tool is extended to grayscale images.This work follows the above line, and further develops it. Anew evolutionary branch is added to the 3D Morphological Shape Decomposition's development, by the introduction of a 3D Multi Structuring Element Morphological Shape Decomposition, which permits 3D Morphological Shape Decomposition of 3D binary images (grayscale images) into "multiparameter" families of elements. At the beginning, 3D Morphological Shape Decomposition representations are based only on "1 parameter" families of elements for image decomposition.This paper addresses the gray scale inter frame interpolation by means of mathematical morphology. The new interframe interpolation method is based on generalized morphological 3D Shape Decomposition. This article will present the theoretical background of the morphological interframe interpolation, deduce the new representation and show some application examples.Computer simulations could illustrate results.
Abstract: In general the images used for compression are of
different types like dark image, high intensity image etc. When these
images are compressed using Counter Propagation Neural Network,
it takes longer time to converge. The reason for this is that the given
image may contain a number of distinct gray levels with narrow
difference with their neighborhood pixels. If the gray levels of the
pixels in an image and their neighbors are mapped in such a way that
the difference in the gray levels of the neighbor with the pixel is
minimum, then compression ratio as well as the convergence of the
network can be improved. To achieve this, a Cumulative Distribution
Function is estimated for the image and it is used to map the image
pixels. When the mapped image pixels are used the Counter
Propagation Neural Network yield high compression ratio as well as
it converges quickly.
Abstract: A real-time tracking system was built to track performers on an interactive stage. Using an ordinary, up to date, desktop workstation, the performers- silhouette was segmented from the background and parameterized by calculating the normalized central image moments. In the stage system, the silhouette moments were then sent to a parallel workstation, which used them to generate corresponding 3D virtual geometry and projected the generated graphic back onto the stage.
Abstract: Modern manufacturing facilities are large scale,
highly complex, and operate with large number of variables under
closed loop control. Early and accurate fault detection and diagnosis
for these plants can minimise down time, increase the safety of plant
operations, and reduce manufacturing costs. Fault detection and
isolation is more complex particularly in the case of the faulty analog
control systems. Analog control systems are not equipped with
monitoring function where the process parameters are continually
visualised. In this situation, It is very difficult to find the relationship
between the fault importance and its consequences on the product
failure. We consider in this paper an approach to fault detection and
analysis of its effect on the production quality using an adaptive
centring and scaling in the pickling process in cold rolling. The fault
appeared on one of the power unit driving a rotary machine, this
machine can not track a reference speed given by another machine.
The length of metal loop is then in continuous oscillation, this affects
the product quality. Using a computerised data acquisition system,
the main machine parameters have been monitored. The fault has
been detected and isolated on basis of analysis of monitored data.
Normal and faulty situation have been obtained by an artificial neural
network (ANN) model which is implemented to simulate the normal
and faulty status of rotary machine. Correlation between the product
quality defined by an index and the residual is used to quality
classification.
Abstract: This article presents a short discussion on
optimum neighborhood size selection in a spherical selforganizing
feature map (SOFM). A majority of the literature
on the SOFMs have addressed the issue of selecting optimal
learning parameters in the case of Cartesian topology SOFMs.
However, the use of a Spherical SOFM suggested that the
learning aspects of Cartesian topology SOFM are not directly
translated. This article presents an approach on how to
estimate the neighborhood size of a spherical SOFM based on
the data. It adopts the L-curve criterion, previously suggested
for choosing the regularization parameter on problems of
linear equations where their right-hand-side is contaminated
with noise. Simulation results are presented on two artificial
4D data sets of the coupled Hénon-Ikeda map.
Abstract: Having a very many number of pipelines all over the
country, Iran is one of the countries consists of various ecosystems
with variable degrees of fragility and robusticity as well as
geographical conditions. This study presents a state-of-the-art method
to estimate environmental risks of pipelines by recommending
rational equations including FES, URAS, SRS, RRS, DRS, LURS
and IRS as well as FRS to calculate the risks. This study was carried
out by a relative semi-quantitative approach based on land uses and
HVAs (High-Value Areas). GIS as a tool was used to create proper
maps regarding the environmental risks, land uses and distances. The
main logic for using the formulas was the distance-based approaches
and ESI as well as intersections. Summarizing the results of the
study, a risk geographical map based on the ESIs and final risk score
(FRS) was created. The study results showed that the most sensitive
and so of high risk area would be an area comprising of mangrove
forests located in the pipeline neighborhood. Also, salty lands were
the most robust land use units in the case of pipeline failure
circumstances. Besides, using a state-of-the-art method, it showed
that mapping the risks of pipelines out with the applied method is of
more reliability and convenience as well as relative
comprehensiveness in comparison to present non-holistic methods for
assessing the environmental risks of pipelines. The focus of the
present study is “assessment" than that of “management". It is
suggested that new policies are to be implemented to reduce the
negative effects of the pipeline that has not yet been constructed
completely
Abstract: The paper presents an on-line recognition machine
(RM) for continuous/isolated, dynamic and static gestures that arise
in Flight Deck Officer (FDO) training. RM is based on generic pattern
recognition framework. Gestures are represented as templates using
summary statistics. The proposed recognition algorithm exploits temporal
and spatial characteristics of gestures via dynamic programming
and Markovian process. The algorithm predicts corresponding index
of incremental input data in the templates in an on-line mode.
Accumulated consistency in the sequence of prediction provides a
similarity measurement (Score) between input data and the templates.
The algorithm provides an intuitive mechanism for automatic detection
of start/end frames of continuous gestures. In the present paper,
we consider isolated gestures. The performance of RM is evaluated
using four datasets - artificial (W TTest), hand motion (Yang) and
FDO (tracker, vision-based ). RM achieves comparable results which
are in agreement with other on-line and off-line algorithms such as
hidden Markov model (HMM) and dynamic time warping (DTW).
The proposed algorithm has the additional advantage of providing
timely feedback for training purposes.
Abstract: The main aim of the presented experiments is to
improve behaviour of sandwich structures under dynamic loading,
such as crash or explosion. Several cellular materials are widely used
as core of the sandwich structures and their properties influence
the response of the entire element under impact load. To optimize
their performance requires the characterisation of the core material
behaviour at high strain rates and identification of the underlying
mechanism. This work presents the study of high strain-rate
characteristics of a specific porous lightweight blast energy absorbing
foam using a Split Hopkinson Pressure Bar (SHPB) technique
adapted to perform tests on low strength materials. Two different
velocities, 15 and 30 m.s-1 were used to determine the strain
sensitivity of the material. Foams were designed using two types of
porous lightweight spherical raw materials with diameters of 30-
100 *m, combined with polymer matrix. Cylindrical specimens with
diameter of 15 mm and length of 7 mm were prepared and loaded
using a Split Hopkinson Pressure Bar apparatus to assess the relation
between the composition of the material and its shock wave
attenuation capacity.
Abstract: Film, as an art form playing a vital role and is a powerful tool in documenting, influencing and shaping the society. Films are the collective creation of a large number of separate individuals, each contributing with creative input, unique talents, and technical expertise to the project. Recently, the Malaysian Independent (or “Indie") filmmakers have made their presence felt by winning awards at various international film festivals. Working in the digital video (DV) format, a number of independent filmmakers really hit their stride with a range of remarkably strong titles and international recognition has been quick in coming and their works are now regularly in exhibition or in competition, winning many top prizes at prestigious festivals around the world. The interaction factors among crewmembers are emphasized as imperative for group success. An in-depth interview is conducted to analyze the social interactions and exchanges between filmmakers through Social Exchanges Theory (SET). Certainly the new millennium that was marked as the digital technology revolution has changed the face of filmmaking in Malaysia. There is a clear need to study the Malaysian independent cinema especially from the perspective of understanding what causes the independent filmmakers to work so well given all of the difficulties and constraints.
Abstract: In recent years, rehabilitation has been the subject of extensive research due to increased spending on building work and repair of built works. In all cases, it is absolutely essential to carry out methods of strengthening or repair of structural elements, and that following an inspection analysis and methodology of a correct diagnosis. The reinforced concrete columns are important elements in building structures. They support the vertical loads and provide bracing against the horizontal loads. This research about the behavior of reinforced concrete rectangular columns, rehabilitated by concrete liner, confinement FRP fabric, steel liner or cage formed by metal corners. It allows comparing the contributions of different processes used perspective section resistance elements rehabilitated compared to that is not reinforced or repaired. The different results obtained revealed a considerable gain in bearing capacity failure of reinforced sections cladding concrete, metal bracket, steel plates and a slight improvement to the section reinforced with fabric FRP. The use of FRP does not affect the weight of the structures, but the use of different techniques cladding increases the weight of elements rehabilitated and therefore the weight of the building which requires resizing foundations.