Abstract: A new strategy of control is formulated for chaos synchronization of non-identical chaotic systems with different orders using the Borne and Gentina practical criterion associated with the Benrejeb canonical arrow form matrix, to drift the stability property of dynamic complex systems. The designed controller ensures that the state variables of controlled chaotic slave systems globally synchronize with the state variables of the master systems, respectively. Numerical simulations are performed to illustrate the efficiency of the proposed method.
Abstract: Micro electromechanical sensors (MEMS) play a vital
role along with global positioning devices in navigation of
autonomous vehicles .These sensors are low cost ,easily available but
depict colored noises and unpredictable discontinuities .Conventional
filters like Kalman filters and Sigma point filters are not able to cope
with nonwhite noises. This research has utilized H∞ filter in nonlinear
frame work both with Kalman filter and Unscented filter for
navigation and self alignment of an airborne vehicle. The system is
simulated for colored noises and discontinuities and results are
compared with not robust nonlinear filters. The results are found
40%-70% more robust against colored noises and discontinuities.
Abstract: This paper discusses on the use of Spline Interpolation
and Mean Square Error (MSE) as tools to process data acquired from
the developed simulator that shall replicate sea bed logging environment.
Sea bed logging (SBL) is a new technique that uses marine
controlled source electromagnetic (CSEM) sounding technique and is
proven to be very successful in detecting and characterizing hydrocarbon
reservoirs in deep water area by using resistivity contrasts. It uses
very low frequency of 0.1Hz to 10 Hz to obtain greater wavelength.
In this work the in house built simulator was used and was provided
with predefined parameters and the transmitted frequency was varied
for sediment thickness of 1000m to 4000m for environment with and
without hydrocarbon. From series of simulations, synthetics data were
generated. These data were interpolated using Spline interpolation
technique (degree of three) and mean square error (MSE) were
calculated between original data and interpolated data. Comparisons
were made by studying the trends and relationship between frequency
and sediment thickness based on the MSE calculated. It was found
that the MSE was on increasing trends in the set up that has the
presence of hydrocarbon in the setting than the one without. The MSE
was also on decreasing trends as sediment thickness was increased
and with higher transmitted frequency.
Abstract: With the turn of this century, many researchers
started showing interest in Embedded Firewall (EF) implementations.
These are not the usual firewalls that are used as checkpoints at network gateways. They are, rather, applied near those hosts that need protection. Hence by using them, individual or grouped network
components can be protected from the inside as well as from external attacks.
This paper presents a study of EF-s, looking at their architecture and problems. A comparative study assesses how practical each kind is. It particularly focuses on the architecture, weak points, and
portability of each kind. A look at their use by different categories of users is also presented.
Abstract: Shippers are concentrating on the core competency to
stay competitive and outsourcing the logistic activities to the third
party who is expert in this field. This third party logistics (3PL) is
drawing the due attention at government, industrial, academicians
and practitioner-s levels. If the logistics cost in India can be brought
down from the current level of 13% of GDP to 9% (level in the U.S.),
the savings would be around Rs 3 lakh crore approximately per
annum. But the problem with the shippers is to select the suitable
3PL provider. Various criteria for selection of 3PL have been listed
in the literature which are discussed in the present literature review.
Every shipper will select the criteria suitable to its own requirement
which have to be dynamically reviewed time to time so as to fit in the
ever changing environment.
Abstract: The mitigation of crop loss due to damaging freezes
requires accurate air temperature prediction models. Previous work
established that the Ward-style artificial neural network (ANN) is a
suitable tool for developing such models. The current research
focused on developing ANN models with reduced average prediction
error by increasing the number of distinct observations used in
training, adding additional input terms that describe the date of an
observation, increasing the duration of prior weather data included in
each observation, and reexamining the number of hidden nodes used
in the network. Models were created to predict air temperature at
hourly intervals from one to 12 hours ahead. Each ANN model,
consisting of a network architecture and set of associated parameters,
was evaluated by instantiating and training 30 networks and
calculating the mean absolute error (MAE) of the resulting networks
for some set of input patterns. The inclusion of seasonal input terms,
up to 24 hours of prior weather information, and a larger number of
processing nodes were some of the improvements that reduced
average prediction error compared to previous research across all
horizons. For example, the four-hour MAE of 1.40°C was 0.20°C, or
12.5%, less than the previous model. Prediction MAEs eight and 12
hours ahead improved by 0.17°C and 0.16°C, respectively,
improvements of 7.4% and 5.9% over the existing model at these
horizons. Networks instantiating the same model but with different
initial random weights often led to different prediction errors. These
results strongly suggest that ANN model developers should consider
instantiating and training multiple networks with different initial
weights to establish preferred model parameters.
Abstract: In this paper, we establish several oscillation criteria for the nonlinear second-order damped delay dynamic equation r(t)|xΔ(t)|β-1xΔ(t)Δ + p(t)|xΔσ(t)|β-1xΔσ(t) + q(t)f(x(τ (t))) = 0 on an arbitrary time scale T, where β > 0 is a constant. Our results generalize and improve some known results in which β > 0 is a quotient of odd positive integers. Some examples are given to illustrate our main results.
Abstract: There is a growing interest in the food industry and in preventive health care for the development and evaluation of natural antioxidants from medicinal plant materials. In the present work, extracts of three medicinal plants (Tilia argentea, Crataegi folium leaves and Polygonum bistorta roots) used in Turkish phytotheraphy were screened for their phenolic profiles and antioxidant properties. Crude extracts were obtained from different parts of plants, by solidliquid extraction with pure water, 70% acetone and 70% methanol aqueous solvents. The antioxidant activity of the extracts was determined by ABTS.+ radical cation scavenging activity. The Folin Ciocalteu procedure was used to assess the total phenolic concentrations of the extracts as gallic acid equivalents. A modified liquid chromatography-electro spray ionization-mass spectrometry (LC-ESI-MS) was used to obtain chromatographic profiles of the phenolic compounds in the medicinal plants. The predominant phenolic compounds detected in different extracts of the plants were catechin, protocatechuic and chlorogenic acids. The highest phenolic contents were obtained by using 70% acetone as aqueous solvent, whereas the lowest phenolic contents were obtained by water extraction due to Folin Ciocalteu results. The results indicate that acetone extracts of Tilia argentea had the highest antioxidant capacity as free ABTS radical scavengers. The lowest phenolic contents and antioxidant capacities were obtained from Polygonum bistorta root extracts.
Abstract: One of the methods for detecting the target position
error in the laser tracking systems is using Four Quadrant (4Q)
detectors. If the coordinates of the target center is yielded through the
usual relations of the detector outputs, the results will be nonlinear,
dependent on the shape, target size and its position on the detector
screen. In this paper we have designed an algorithm with using
neural network that coordinates of the target center in laser tracking
systems is calculated by using detector outputs obtained from visual
modeling. With this method, the results except from the part related
to the detector intrinsic limitation, are linear and dependent from the
shape and target size.
Abstract: Truncated multiplier is a good candidate for digital
signal processing (DSP) applications including finite impulse
response (FIR) and discrete cosine transform (DCT). Through
truncated multiplier a significant reduction in Field Programmable
Gate Array (FPGA) resources can be achieved. This paper presents
for the first time a comparison of resource utilization of Spartan-3AN
and Virtex-5 implementation of standard and truncated multipliers
using Very High Speed Integrated Circuit Hardware Description
Language (VHDL). The Virtex-5 FPGA shows significant
improvement as compared to Spartan-3AN FPGA device. The
Virtex-5 FPGA device shows better performance with a percentage
ratio of number of occupied slices for standard to truncated
multipliers is increased from 40% to 73.86% as compared to Spartan-
3AN is decreased from 68.75% to 58.78%. Results show that the
anomaly in Spartan-3AN FPGA device average connection and
maximum pin delay have been efficiently reduced in Virtex-5 FPGA
device.
Abstract: More and more natural disasters are happening every
year: floods, earthquakes, volcanic eruptions, etc. In order to reduce
the risk of possible damages, governments all around the world are
investing into development of Early Warning Systems (EWS) for
environmental applications. The most important task of the EWS is
identification of the onset of critical situations affecting environment
and population, early enough to inform the authorities and general
public. This paper describes an approach for monitoring of flood
protections systems based on machine learning methods. An
Artificial Intelligence (AI) component has been developed for
detection of abnormal dike behaviour. The AI module has been
integrated into an EWS platform of the UrbanFlood project (EU
Seventh Framework Programme) and validated on real-time
measurements from the sensors installed in a dike.
Abstract: This study compared socio-economic status attainment between the Muslim and Santal couples in rural Bangladesh. For this we hypothesized that socio-economic status attainment (occupation, education and income) of the Muslim couples was higher than the Santal ones in rural Bangladesh. In order to examine the hypothesis 288 couples (145 couples for Muslim and 143 couples for Santal) selected by cluster random sampling from Kalna village, Bangladesh were individually interviewed with semistructured questionnaire method. The results of Pearson Chi-Squire test suggest that there were significant differences in socio-economic status attainment between the two communities- couples. In addition, Pearson correlation coefficients also suggest that there were significant associations between the socio-economic statuses attained by the two communities- couples in rural Bangladesh. Further crosscultural study should conduct on how inter-community relations in rural social structure of Bangladesh influence the differences among the couples- socio-economic status attainment
Abstract: Insider abuse has recently been reported as one of
the more frequently occurring security incidents, suggesting that
more security is required for detecting and preventing unauthorised
financial transactions entered by authorised users. To address the
problem, and based on the observation that all authorised interbanking
financial transactions trigger or are triggered by other
transactions in a workflow, we have developed a security solution
based on a redefined understanding of an audit workflow. One audit
workflow where there is a log file containing the complete workflow
activity of financial transactions directly related to one financial
transaction (an electronic deal recorded at an e-trading system). The
new security solution contemplates any two parties interacting on
the basis of financial transactions recorded by their users in related
but distinct automated financial systems. In the new definition interorganizational
and intra-organization interactions can be described
in one unique audit trail. This concept expands the current ideas of
audit trails by adapting them to actual e-trading workflow activity, i.e.
intra-organizational and inter-organizational activity. With the above,
a security auditing service is designed to detect integrity drifts with
and between organizations in order to detect unauthorised financial
transactions entered by authorised users.
Abstract: This manuscript presents a method for the numerical solution of the Cauchy type singular integral equations of the first kind, over a finite segment which is bounded at the end points of the finite segment. The Chebyshev polynomials of the second kind with the corresponding weight function have been used to approximate the density function. The force function is approximated by using the Chebyshev polynomials of the first kind. It is shown that the numerical solution of characteristic singular integral equation is identical with the exact solution, when the force function is a cubic function. Moreover, it also shown that this numerical method gives exact solution for other singular integral equations with degenerate kernels.
Abstract: Software Architecture plays a key role in software development but absence of formal description of Software Architecture causes different impede in software development. To cope with these difficulties, ontology has been used as artifact. This paper proposes ontology for Software Architectural design based on IEEE model for architecture description and Kruchten 4+1 model for viewpoints classification. For categorization of style and views, ISO/IEC 42010 has been used. Corpus method has been used to evaluate ontology. The main aim of the proposed ontology is to classify and locate Software Architectural design information.
Abstract: This study aims to identify processes, current
situations, and issues of recycling systems for four home appliances,
namely, air conditioners, television receivers, refrigerators, and
washing machines, among e-wastes in China and Japan for
understanding and comparison of their characteristics. In accordance
with results of a literature search, review of information disclosed
online, and questionnaire survey conducted, conclusions of the study
boil down to:
(1)The results show that in Japan most of the home appliances
mentioned above have been collected through home appliance
recycling tickets, resulting in an issue of “requiring some effort" in
treatment and recycling stages, and most plants have contracted out
their e-waste recycling.
(2)It is found out that advantages of the recycling system in Japan
include easiness to monitor concrete data and thorough
environmental friendliness ensured while its disadvantages include
illegal dumping and export. It becomes apparent that advantages of
the recycling system in China include a high reuse rate, low
treatment cost, and fewer illegal dumping while its disadvantages
include less safe reused products, environmental pollution caused by
e-waste treatment, illegal import, and difficulty in obtaining data.
Abstract: Equal Channel Angular Pressing (ECAP) is currently
being widely investigated because of its potential to produce ultrafine
grained microstructures in metals and alloys. A sound
knowledge of the plastic deformation and strain distribution is
necessary for understanding the relationships between strain
inhomogeneity and die geometry. Considerable research has been
reported on finite element analysis of this process, assuming threedimensional
plane strain condition. However, the two-dimensional
models are not suitable due to the geometry of the dies, especially in
cylindrical ones. In the present work, three-dimensional simulation of
ECAP process was carried out for six outer corner radii (sharp to 10
mm in steps of 2 mm), with channel angle 105¶Çü▒, for strain hardening
aluminium alloy (AA 6101) using ABAQUS/Standard software.
Strain inhomogeneity is presented and discussed for all cases. Pattern
of strain variation along selected radial lines in the body of the workpiece
is presented. It is found from the results that the outer corner
has a significant influence on the strain distribution in the body of
work-piece. Based on inhomogeneity and average strain criteria,
there is an optimum outer corner radius.
Abstract: This paper shows the potential system benefits of
simple tracking solar system using a stepper motor and light sensor.
This method is increasing power collection efficiency by developing
a device that tracks the sun to keep the panel at a right angle to its
rays. A solar tracking system is designed, implemented and
experimentally tested. The design details and the experimental results
are shown.
Abstract: This study discusses the stumbling blocks stifling the
adoption of GPS technology in the public sector of Pakistan. This
study has been carried out in order to describe the value of GPS
technology and its adoption at various public sector organisations in
Pakistan. Sample size for the research conducted was 200; personnel
working in public sector having age above 29 years were surveyed.
Data collected for this research has been quantitatively analysed with
the help of SPSS. Regression analysis, correlation and cross
tabulation were the techniques used to determine the strength of
relationship between key variables. Findings of this research indicate
that main hurdles in GPS adoption in the public sector of Pakistan are
lack of awareness about GPS among masses in general and the
stakeholders in particular, lack of initiative on part of government in
promoting new technologies, unavailability of GPS infrastructure in
Pakistan and prohibitions on map availability because of security
reasons.
Abstract: This study offers a new simple method for assessing
an axial part-through crack in a pipe wall. The method utilizes simple
approximate expressions for determining the fracture parameters K,
J, and employs these parameters to determine critical dimensions of a
crack on the basis of equality between the J-integral and the J-based
fracture toughness of the pipe steel. The crack tip constraint is taken
into account by the so-called plastic constraint factor C, by which the
uniaxial yield stress in the J-integral equation is multiplied. The
results of the prediction of the fracture condition are verified by burst
tests on test pipes.