Abstract: Game theory could be used to analyze the conflicted
issues in the field of information hiding. In this paper, 2-phase game
can be used to build the embedder-attacker system to analyze the
limits of hiding capacity of embedding algorithms: the embedder
minimizes the expected damage and the attacker maximizes it. In the
system, the embedder first consumes its resource to build embedded
units (EU) and insert the secret information into EU. Then the attacker
distributes its resource evenly to the attacked EU. The expected
equilibrium damage, which is maximum damage in value from the
point of view of the attacker and minimum from the embedder against
the attacker, is evaluated by the case when the attacker attacks a
subset from all the EU. Furthermore, the optimal equilibrium capacity
of hiding information is calculated through the optimal number of EU
with the embedded secret information. Finally, illustrative examples
of the optimal equilibrium capacity are presented.
Abstract: This paper describes the pipeline architecture of
high-speed modified Booth multipliers. The proposed multiplier
circuits are based on the modified Booth algorithm and the pipeline
technique which are the most widely used to accelerate the
multiplication speed. In order to implement the optimally pipelined
multipliers, many kinds of experiments have been conducted. The
speed of the multipliers is greatly improved by properly deciding the
number of pipeline stages and the positions for the pipeline registers to
be inserted. We described the proposed modified Booth multiplier
circuits in Verilog HDL and synthesized the gate-level circuits using
0.13um standard cell library. The resultant multiplier circuits show
better performance than others. Since the proposed multipliers operate
at GHz ranges, they can be used in the systems requiring very high
performance.
Abstract: A new estimator for evolutionary spectrum (ES) based
on short time Fourier transform (STFT) and modified group delay
function (MGDF) by signal decomposition (SD) is proposed. The
STFT due to its built-in averaging, suppresses the cross terms and the
MGDF preserves the frequency resolution of the rectangular window
with the reduction in the Gibbs ripple. The present work overcomes
the magnitude distortion observed in multi-component non-stationary
signals with STFT and MGDF estimation of ES using SD. The SD is
achieved either through discrete cosine transform based harmonic
wavelet transform (DCTHWT) or perfect reconstruction filter banks
(PRFB). The MGDF also improves the signal to noise ratio by
removing associated noise. The performance of the present method is
illustrated for cross chirp and frequency shift keying (FSK) signals,
which indicates that its performance is better than STFT-MGDF
(STFT-GD) alone. Further its noise immunity is better than STFT.
The SD based methods, however cannot bring out the frequency
transition path from band to band clearly, as there will be gap in the
contour plot at the transition. The PRFB based STFT-SD shows good
performance than DCTHWT decomposition method for STFT-GD.
Abstract: This paper presents the results of corrosion fatigue
crack growth behaviour of a Ni-Cr-Mn steel commonly used in
marine applications. The effect of mechanical variables such as
frequency and load ratio on fatigue crack growth rate at various
stages has been studied using compact tension (C(T)) specimens
along the rolling direction of steel plate under 3.5% saturated NaCl
aqueous environment. The significance of crack closure on corrosion
fatigue, and the validity of Elber-s empirical linear crack closure
model with the ASTM compliance offset method have been
examined.
Fatigue crack growth rate is higher and threshold stress intensities
are lower in aqueous environment compared to the lab air conditions.
It is also observed that the crack growth rate increases at lower
frequencies. The higher stress ratio promotes the crack growth. The
effect of oxidization and corrosion pit formation is very less as the
stress ratio is increased. It is observed that as stress ratios are
increased, the Elber-s crack closure model agrees well with the crack
closure estimated by the ASTM compliance offset method for tests
conducted at 5Hz frequency compared to tests conducted at 1Hz in
corrosive environment.
Abstract: This paper aims to describe how student satisfaction is
measured for work-based learners as these are non-traditional
learners, conducting academic learning in the workplace, typically
their curricula have a high degree of negotiation, and whose
motivations are directly related to their employers- needs, as well as
their own career ambitions. We argue that while increasing WBL
participation, and use of SSD are both accepted as being of strategic
importance to the HE agenda, the use of WBL SSD is rarely
examined, and lessons can be learned from the comparison of SSD
from a range of WBL programmes, and increased visibility of this
type of data will provide insight into ways to improve and develop
this type of delivery. The key themes that emerged from the analysis
of the interview data were: learners profiles and needs, employers
drivers, academic staff drivers, organizational approach, tools for
collecting data and visibility of findings. The paper concludes with
observations on best practice in the collection, analysis and use of
WBL SSD, thus offering recommendations for both academic
managers and practitioners.
Abstract: Flow around a flat tube is studied numerically. Reynolds number is defined base on equivalent circular tube and it is varied in range of 100 to 300. Equations are solved by using finite volume method and results are presented in form of drag and lift coefficient. Results show that drag coefficient of flat tube is up to 66% lower than circular tube with equivalent diameter. In addition, by increasing l/D from 1 to 2, the drag coefficient of flat tube is decreased about 14-27%.
Abstract: To improve the efficiency of parametric studies or
tests planning the method is proposed, that takes into account all input parameters, but only a few simulation runs are performed to
assess the relative importance of each input parameter. For K input
parameters with N input values the total number of possible combinations of input values equals NK. To limit the number of runs,
only some (totally N) of possible combinations are taken into account. The sampling procedure Updated Latin Hypercube
Sampling is used to choose the optimal combinations. To measure the
relative importance of each input parameter, the Spearman rank
correlation coefficient is proposed. The sensitivity and the influence
of all parameters are analyzed within one procedure and the key
parameters with the largest influence are immediately identified.
Abstract: Young patients suffering from Cerebral Palsy are
facing difficult choices concerning heavy surgeries. Diagnosis settled
by surgeons can be complex and on the other hand decision for
patient about getting or not such a surgery involves important
reflection effort. Proposed software combining prediction for
surgeries and post surgery kinematic values, and from 3D model
representing the patient is an innovative tool helpful for both patients
and medicine professionals. Beginning with analysis and
classification of kinematics values from Data Base extracted from
gait analysis in 3 separated clusters, it is possible to determine close
similarity between patients. Prediction surgery best adapted to
improve a patient gait is then determined by operating a suitable
preconditioned neural network. Finally, patient 3D modeling based
on kinematic values analysis, is animated thanks to post surgery
kinematic vectors characterizing the closest patient selected from
patients clustering.
Abstract: An approach of design of stable of control systems with ultimately wide ranges of uncertainly disturbed parameters is offered. The method relies on using of nonlinear structurally stable functions from catastrophe theory as controllers. Theoretical part presents an analysis of designed nonlinear second-order control systems. As more important the integrators in series, canonical controllable form and Jordan forms are considered. The analysis resumes that due to added controllers systems become stable and insensitive to any disturbance of parameters. Experimental part presents MATLAB simulation of design of control systems of epidemic spread, aircrafts angular motion and submarine depth. The results of simulation confirm the efficiency of offered method of design. KeywordsCatastrophes, robust control, simulation, uncertain parameters.
Abstract: Authentication plays a vital role in many secure
systems. Most of these systems require user to log in with his or her
secret password or pass phrase before entering it. This is to ensure all
the valuables information is kept confidential guaranteeing also its
integrity and availability. However, to achieve this goal, users are
required to memorize high entropy passwords or pass phrases.
Unfortunately, this sometimes causes difficulty for user to remember
meaningless strings of data. This paper presents a new scheme which
assigns a weight to each personal question given to the user in
revealing the encrypted secrets or password. Concentration of this
scheme is to offer fault tolerance to users by allowing them to forget
the specific password to a subset of questions and still recover the
secret and achieve successful authentication. Comparison on level of
security for weight-based and weightless secret recovery scheme is
also discussed. The paper concludes with the few areas that requires
more investigation in this research.
Abstract: In this study, the reduction of Cr(VI) by use of scrap
iron, a cheap and locally available industrial waste, was investigated
in continuous system. The greater scrap iron efficiency observed for
the first two sections of the column filling indicate that most of the
reduction process was carried out in the bottom half of the column
filling. This was ascribed to a constant decrease of Cr(VI)
concentration inside the filling, as the water front passes from the
bottom to the top end of the column. While the bottom section of the
column filling was heavily passivated with secondary mineral phases,
the top section was less affected by the passivation process; therefore
the column filling would likely ensure the reduction of Cr(VI) for
time periods longer than 216 hours. The experimental results indicate
that fixed beds columns packed with scrap iron could be successfully
used for the first step of Cr(VI) polluted wastewater treatment.
However, the mass of scrap iron filling should be carefully estimated
since it significantly affects the Cr(VI) reduction efficiency.
Abstract: Numerical integration of initial boundary problem for advection equation in 3 ℜ is considered. The method used is
conditionally stable semi-Lagrangian advection scheme with high order interpolation on unstructured mesh. In order to increase time step integration the BFECC method with limiter TVD correction is used. The method is adopted on parallel graphic processor unit environment using NVIDIA CUDA and applied in Navier-Stokes solver. It is shown that the calculation on NVIDIA GeForce 8800
GPU is 184 times faster than on one processor AMDX2 4800+ CPU. The method is extended to the incompressible fluid dynamics solver. Flow over a Cylinder for 3D case is compared to the experimental data.
Abstract: In this paper, a Gaussian multiple input multiple output multiple eavesdropper (MIMOME) channel is considered where a transmitter communicates to a receiver in the presence of an eavesdropper. We present a technique for determining the secrecy capacity of the multiple input multiple output (MIMO) channel under Gaussian noise. We transform the degraded MIMOME channel into multiple single input multiple output (SIMO) Gaussian wire-tap channels and then use scalar approach to convert it into two equivalent multiple input single output (MISO) channels. The secrecy capacity model is then developed for the condition where the channel state information (CSI) for main channel only is known to the transmitter. The results show that the secret communication is possible when the eavesdropper channel noise is greater than a cutoff noise level. The outage probability is also analyzed of secrecy capacity is also analyzed. The effect of fading and outage probability is also analyzed.
Abstract: increased competition and increased costs of
designing made it important for the firms to identify the right
products and the right methods for manufacturing the products. Firms
should focus on customers and identify customer demands directly to
design the right products. Several management methods and
techniques that are currently available improve one or more functions
or processes in an industry and do not take the complete product life
cycle into consideration. On the other hand target costing is a method
/ philosophy that takes financial, manufacturing and customer aspects
into consideration during designing phase and helps firms in making
product design decisions to increase the profit / value of the
company. It uses various techniques to identify customer demands, to
decrease costs of manufacturing and finally to achieve strategic goals.
Target Costing forms an integral part of total product design /
redesign based on strategic plans.
Abstract: Internet access is a vital part of the modern world and an important tool in the education of our children. It is present in schools, homes and even shopping malls. Mastering the use of the internet is likely to be an important skill for those entering the job markets of the future. An internet user can be anyone he or she wants to be in an online chat room, or play thrilling and challenging games against other players from all corners of the globe. It seems at present time (or near future) for many people relationships in the real world may be neglected as those in the virtual world increase in importance. Internet is provided a fast mode of transportation caused freedom from family bonds and mixing with different cultures and new communities. This research is an attempt to study effect of Internet on Social capital. For this purpose a survey technique on the sample size amounted 168 students of Payame Noor University of Kermanshah city in country of Iran were considered. Degree of social capital is moderate. With the help of the Multi-variable Regression, variables of Iranian message attractive, Interest to internet with effect of positive and variable Creating a cordial atmosphere with negative effect be significant.
Abstract: The efficient use of available licensed spectrum is
becoming more and more critical with increasing demand and usage
of the radio spectrum. This paper shows how the use of spectrum as
well as dynamic spectrum management can be effectively managed
and spectrum allocation schemes in the wireless communication
systems be implemented and used, in future. This paper would be an
attempt towards better utilization of the spectrum. This research will
focus on the decision-making process mainly, with an
assumption that the radio environment has already been sensed and
the QoS requirements for the application have been specified either
by the sensed radio environment or by the secondary user itself. We
identify and study the characteristic parameters of Cognitive Radio
and use Genetic Algorithm for spectrum allocation. Performance
evaluation is done using MATLAB toolboxes.
Abstract: Process measurement is the task of empirically and objectively assigning numbers to the properties of business processes in such a way as to describe them. Desirable attributes to study and measure include complexity, cost, maintainability, and reliability. In our work we will focus on investigating process complexity. We define process complexity as the degree to which a business process is difficult to analyze, understand or explain. One way to analyze a process- complexity is to use a process control-flow complexity measure. In this paper, an attempt has been made to evaluate the control-flow complexity measure in terms of Weyuker-s properties. Weyuker-s properties must be satisfied by any complexity measure to qualify as a good and comprehensive one.
Abstract: The binary phase-only filter digital watermarking
embeds the phase information of the discrete Fourier transform of the
image into the corresponding magnitudes for better image authentication.
The paper proposed an approach of how to implement watermark
embedding by quantizing the magnitude, with discussing how to
regulate the quantization steps based on the frequencies of the magnitude
coefficients of the embedded watermark, and how to embed the
watermark at low frequency quantization. The theoretical analysis and
simulation results show that algorithm flexibility, security, watermark
imperceptibility and detection performance of the binary phase-only
filter digital watermarking can be effectively improved with quantization
based watermark embedding, and the robustness against JPEG
compression will also be increased to some extent.
Abstract: With the rapid advanced of technology, the industrial processes become increasingly demanding, from the point of view, power quality and controllability. The advent of multi levels inverters responds partially to these requirements. But actually, the new generation of multi-cells inverters permits to reach more performances, since, it offers more voltage levels. The disadvantage in the increase of voltage levels by the number of cells in cascades is on account of series igbts synchronisation loss, from where, a limitation of cells in cascade to 4. Regarding to these constraints, a new topology is proposed in this paper, which increases the voltage levels of the three-cell inverter from 4 to 8; with the same number of igbts, and using less stored energy in the flaying capacitors. The details of operation and modelling of this new inverter structure are also presented, then tested thanks to a three phase induction motor. KeywordsFlaying capacitors, Multi-cells inverter, pwm, switchers, modelling.
Abstract: Small and Medium Sized Enterprises (SMEs) play an important role in many economies. In New Zealand, for example, 97% of all manufacturing companies employ less than 100 staff, and generate the predominant part of this industry sector-s economic output. Manufacturing SMEs as a group also have a significant impact on the environment. This situation is similar in many developed economies, including the European Union. Sustainable economic development therefore needs to strongly consider the role of manufacturing SMEs, who generally find it challenging to move towards more environmentally friendly business practices. This paper presents a systems thinking approach to modelling and understanding the factors which have an influence on the successful uptake of environmental practices in small and medium sized manufacturing companies. It presents a number of causal loop diagrams which have been developed based on primary action research, and a thorough understanding of the literature in this area. The systems thinking model provides the basis for further development of a strategic framework for the successful uptake of environmental innovation in manufacturing SMEs.