Abstract: Impact is one of very important subjects which always have been considered in mechanical science. Nature of impact is such that which makes its control a hard task. Therefore it is required to present the transfer of impact to other vulnerable part of a structure, when it is necessary, one of the best method of absorbing energy of impact, is by using Thin-walled tubes these tubes collapses under impact and with absorption of energy, it prevents the damage to other parts.Purpose of recent study is to survey the deformation and energy absorption of tubes with different type of cross section (rectangular or square) and with similar volumes, height, mean cross section thickness, and material under loading with different speeds. Lateral loading of tubes are quasi-static type and beside as numerical analysis, also experimental experiences has been performed to evaluate the accuracy of the results. Results from the surveys is indicates that in a same conditions which mentioned above, samples with square cross section ,absorb more energy compare to rectangular cross section, and also by increscent in speed of loading, energy absorption would be more.
Abstract: Recently, there has been a considerable increase in the
number of procedures carried out under regional anesthesia.
However, percutaneous nephrolithotomy (PCNL) procedures are
usually performed under general anesthesia. The aim of this study
was to assess the safety and efficacy of PCNL under spinal anesthesia
in patients with renal calculi. We describe our 9 years experience of
performing PCNL under spinal anesthesia for 387 patients with large
stones of the upper urinary tract, with regard to the effectiveness and
side effects. All patients received spinal anesthetics (Lidocain 5%, or
Bupivacaine 0.75%) and underwent PCNL in prone position. The
success rate was 94.1%. The incidence of complications was 11.6%.
PCNL under spinal anesthesia is feasible, safe, and well-tolerated in
management of patients with renal stones.
Abstract: The substrate heater designed for this investigation is a front side substrate heating system. It consists of 10 conventional tungsten halogen lamps and an aluminum reflector, total input electrical power of 5 kW. The substrate is heated by means of a radiation from conventional tungsten halogen lamps directed to the substrate through a glass window. This design allows easy replacement of the lamps and maintenance of the system. Within 2 to 6 minutes the substrate temperature reaches 500 to 830 C by varying the vertical distance between the glass window and the substrate holder. Moreover, the substrate temperature can be easily controlled by controlling the input power to the system. This design gives excellent opportunity to deposit many deferent films at deferent temperatures in the same deposition time. This substrate heater was successfully used for Chemical Vapor Deposition (CVD) of many thin films, such as Silicon, iron, etc.
Abstract: Mycotoxin (aflatoxins) contamination of peanuts is a
great concern for human health. A total of 72 samples of unripe,
roasted, and salty peanuts were collected randomly from Pothohar
plateau of Pakistan for the assessment of aflatoxin. Samples were
dried, ground and extracted by acetonitrile (84%). The filtered
extracts were cleaned up by MycoSep-226 and analyzed by high
performance liquid chromatography with flourescence detector.
Quantification limit of Aflatoxin was 1 μg/kg and 70% Recovery was
observed in spiked samples in the range 1–10 μg/kg. The screening
of mycotoxins indicated that aflatoxins were present in most of the
samples being detected in 82%, in concentrations from 14.25 μg/kg
to 98.80 μg/kg. Optimal conditions for mycotoxin production and
fungal growth are frequently found in the crop fields as well as in
store houses. Human exposure of such toxin can be controlled by
pointed out such awareness and implemented the regulations.
Abstract: The Internet telephony employs a new type of Internet communication on which a mutual communication is realized by establishing sessions. Session Initiation Protocol (SIP) is used to establish sessions between end-users. For unreliable transmission (UDP), SIP message should be retransmitted when it is lost. The retransmissions increase a load of the SIP signaling network, and sometimes lead to performance degradation when a network is overloaded. The paper proposes an overload control for a SIP signaling network to protect from a performance degradation. Introducing two thresholds in a queue of a SIP proxy server, the SIP proxy server detects a congestion. Once congestion is detected, a SIP signaling network restricts to make new calls. The proposed overload control is evaluated using the network simulator (ns-2). With simulation results, the paper shows the proposed overload control works well.
Abstract: We prove detailed analysis of a waveguide-based Schottky barrier photodetector (SBPD) where a thin silicide film is put on the top of a silicon-on-insulator (SOI) channel waveguide to absorb light propagating along the waveguide. Taking both the confinement factor of light absorption and the wall scanning induced gain of the photoexcited carriers into account, an optimized silicide thickness is extracted to maximize the effective gain, thereby the responsivity. For typical lengths of the thin silicide film (10-20 Ðçm), the optimized thickness is estimated to be in the range of 1-2 nm, and only about 50-80% light power is absorbed to reach the maximum responsivity. Resonant waveguide-based SBPDs are proposed, which consist of a microloop, microdisc, or microring waveguide structure to allow light multiply propagating along the circular Si waveguide beneath the thin silicide film. Simulation results suggest that such resonant waveguide-based SBPDs have much higher repsonsivity at the resonant wavelengths as compared to the straight waveguidebased detectors. Some experimental results about Si waveguide-based SBPD are also reported.
Abstract: The procurement and cost management approach adopted for mechanical and electrical (M&E) services in Malaysian construction industry have been criticized for its inefficiency. The study examined early cost estimating practices adopted for mechanical and electrical services (M&E) in Malaysia so as to understand the level of compliance of the current techniques with best practices. The methodology adopted for the study is a review of bidding documents used on both completed and on – going building projects awarded between 2008 – 2010 under 9th Malaysian Plan. The analysis revealed that, M&E services cost cannot be reliably estimated at pre-contract stage; the bidding techniques adopted for M&E services failed to provide uniform basis for contractors to submit tender; detailed measurement of items were not made which could complicate post contract cost control and financial management. The paper concluded that, there is need to follow a structured approach in determining the pre-contract cost estimate for M&E services which will serve as a virile tool for post contract cost control.
Abstract: Fundamental sensor-motor couplings form the backbone
of most mobile robot control tasks, and often need to be implemented
fast, efficiently and nevertheless reliably. Machine learning
techniques are therefore often used to obtain the desired sensor-motor
competences.
In this paper we present an alternative to established machine
learning methods such as artificial neural networks, that is very fast,
easy to implement, and has the distinct advantage that it generates
transparent, analysable sensor-motor couplings: system identification
through nonlinear polynomial mapping.
This work, which is part of the RobotMODIC project at the
universities of Essex and Sheffield, aims to develop a theoretical understanding
of the interaction between the robot and its environment.
One of the purposes of this research is to enable the principled design
of robot control programs.
As a first step towards this aim we model the behaviour of the
robot, as this emerges from its interaction with the environment, with
the NARMAX modelling method (Nonlinear, Auto-Regressive, Moving
Average models with eXogenous inputs). This method produces
explicit polynomial functions that can be subsequently analysed using
established mathematical methods.
In this paper we demonstrate the fidelity of the obtained NARMAX
models in the challenging task of robot route learning; we present a
set of experiments in which a Magellan Pro mobile robot was taught
to follow four different routes, always using the same mechanism to
obtain the required control law.
Abstract: Concerning the measurement of friction properties of
textiles and fabrics using Kawabata Evaluation System (KES), whose
output is constrained to the surface friction factor of fabric, and no
other data would be generated; this research has been conducted to
gain information about surface roughness regarding its surface
friction factor. To assess roughness properties of light nonwovens, a
3-dimensional model of a surface has been simulated with regular
sinuous waves through it as an ideal surface. A new factor was
defined, namely Surface Roughness Factor, through comparing
roughness properties of simulated surface and real specimens. The
relation between the proposed factor and friction factor of specimens
has been analyzed by regression, and results showed a meaningful
correlation between them. It can be inferred that the new presented
factor can be used as an acceptable criterion for evaluating the
roughness properties of light nonwoven fabrics.
Abstract: This paper proposes and analyses the wireless
telecommunication system with multiple antennas to the emission
and reception MIMO (multiple input multiple output) with space
diversity in a OFDM context. In particular it analyses the
performance of a DTT (Digital Terrestrial Television) broadcasting
system that includes MIMO-OFDM techniques. Different
propagation channel models and configurations are considered for
each diversity scheme. This study has been carried out in the context
of development of the next generation DVB-T/H and WRAN.
Abstract: Oxidative stress is considered to be the cause for onset
and the progression of type 2 diabetes mellitus (T2DM) and
complications including neuropathy. It is a deleterious process that
can be an important mediator of damage to cell structures: protein,
lipids and DNA. Data suggest that in patients with diabetes and
diabetic neuropathy DNA repair is impaired, which prevents effective
removal of lesions. Objective: The aim of our study was to evaluate
the association of the hOGG1 (326 Ser/Cys) and XRCC1 (194
Arg/Trp, 399 Arg/Gln) gene polymorphisms whose protein is
involved in the BER pathway with DNA repair efficiency in patients
with diabetes type 2 and diabetic neuropathy compared to the healthy
subjects. Genotypes were determined by PCR-RFLP analysis in 385
subjects, including 117 with type 2 diabetes, 56 with diabetic
neuropathy and 212 with normal glucose metabolism. The
polymorphisms studied include codon 326 of hOGG1 and 194, 399
of XRCC1 in the base excision repair (BER) genes. Comet assay was
carried out using peripheral blood lymphocytes from the patients and
controls. This test enabled the evaluation of DNA damage in cells
exposed to hydrogen peroxide alone and in the combination with the
endonuclease III (Nth). The results of the analysis of polymorphism
were statistically examination by calculating the odds ratio (OR) and
their 95% confidence intervals (95% CI) using the ¤ç2-tests. Our data
indicate that patients with diabetes mellitus type 2 (including those
with neuropathy) had higher frequencies of the XRCC1 399Arg/Gln
polymorphism in homozygote (GG) (OR: 1.85 [95% CI: 1.07-3.22],
P=0.3) and also increased frequency of 399Gln (G) allele (OR: 1.38
[95% CI: 1.03-1.83], P=0.3). No relation to other polymorphisms
with increased risk of diabetes or diabetic neuropathy. In T2DM
patients complicated by neuropathy, there was less efficient repair of
oxidative DNA damage induced by hydrogen peroxide in both the
presence and absence of the Nth enzyme. The results of our study
suggest that the XRCC1 399 Arg/Gln polymorphism is a significant
risk factor of T2DM in Polish population. Obtained data suggest a
decreased efficiency of DNA repair in cells from patients with
diabetes and neuropathy may be associated with oxidative stress.
Additionally, patients with neuropathy are characterized by even
greater sensitivity to oxidative damage than patients with diabetes,
which suggests participation of free radicals in the pathogenesis of
neuropathy.
Abstract: This paper describes a proposed support system which
enables applications designers to effectively create VR applications
using multiple haptic APIs. When the VR designers create
applications, it is often difficult to handle and understand many
parameters and functions that have to be set in the application program
using documentation manuals only. This complication may disrupt
creative imagination and result in inefficient coding. So, we proposed
the support application which improved the efficiency of VR
applications development and provided the interactive components of
confirmation of operations with haptic sense previously.
In this paper, we describe improvements of our former proposed
support application, which was applicable to multiple APIs and haptic
devices, and evaluate the new application by having participants
complete VR program. Results from a preliminary experiment suggest
that our application facilitates creation of VR applications.
Abstract: In this paper is described a new conception of the
Cartesian robot for automated assembly and also disassembly
process. The advantage of this conception is the utilization the
Cartesian assembly robot with its all peripheral automated devices for
assembly of the assembled product. The assembly product in the end
of the lifecycle can be disassembled with the same Cartesian
disassembly robot with the use of the same peripheral automated
devices and equipment. It is a new approach to problematic solving
and development of the automated assembly systems with respect to
lifecycle management of the assembly product and also assembly
system with Cartesian robot. It is also important to develop the
methodical process for design of automated assembly and
disassembly system with Cartesian robot. Assembly and disassembly
system use the same Cartesian robot input and output devices,
assembly and disassembly units in one workplace with different
application. Result of design methodology is the verification and
proposition of real automated assembly and disassembly workplace
with Cartesian robot for known verified model of assembled actuator.
Abstract: In this paper, image compression using hybrid vector
quantization scheme such as Multistage Vector Quantization
(MSVQ) and Pyramid Vector Quantization (PVQ) are introduced. A
combined MSVQ and PVQ are utilized to take advantages provided
by both of them. In the wavelet decomposition of the image, most of
the information often resides in the lowest frequency subband.
MSVQ is applied to significant low frequency coefficients. PVQ is
utilized to quantize the coefficients of other high frequency
subbands. The wavelet coefficients are derived using lifting scheme.
The main aim of the proposed scheme is to achieve high compression
ratio without much compromise in the image quality. The results are
compared with the existing image compression scheme using MSVQ.
Abstract: The segmentation of mouth and lips is a fundamental
problem in facial image analyisis. In this paper we propose a method
for lip segmentation based on rg-color histogram. Statistical analysis
shows, using the rg-color-space is optimal for this purpose of a pure
color based segmentation. Initially a rough adaptive threshold selects
a histogram region, that assures that all pixels in that region are
skin pixels. Based on that pixels we build a gaussian model which
represents the skin pixels distribution and is utilized to obtain a
refined, optimal threshold. We are not incorporating shape or edge
information. In experiments we show the performance of our lip pixel
segmentation method compared to the ground truth of our dataset and
a conventional watershed algorithm.
Abstract: In this work, the primary compressive strength
components of human femur trabecular bone are qualitatively
assessed using image processing and wavelet analysis. The Primary
Compressive (PC) component in planar radiographic femur trabecular
images (N=50) is delineated by semi-automatic image processing
procedure. Auto threshold binarization algorithm is employed to
recognize the presence of mineralization in the digitized images. The
qualitative parameters such as apparent mineralization and total area
associated with the PC region are derived for normal and abnormal
images.The two-dimensional discrete wavelet transforms are utilized
to obtain appropriate features that quantify texture changes in medical
images .The normal and abnormal samples of the human femur are
comprehensively analyzed using Harr wavelet.The six statistical
parameters such as mean, median, mode, standard deviation, mean
absolute deviation and median absolute deviation are derived at level
4 decomposition for both approximation and horizontal wavelet
coefficients. The correlation coefficient of various wavelet derived
parameters with normal and abnormal for both approximated and
horizontal coefficients are estimated. It is seen that in almost all cases
the abnormal show higher degree of correlation than normals. Further
the parameters derived from approximation coefficient show more
correlation than those derived from the horizontal coefficients. The
parameters mean and median computed at the output of level 4 Harr
wavelet channel was found to be a useful predictor to delineate the
normal and the abnormal groups.
Abstract: The study investigated the effects of Teaching Games
for Understanding approach on students ‘cognitive learning outcome.
The study was a quasi-experimental non-equivalent pretest-posttest
control group design whereby 10 year old primary school students
(n=72) were randomly assigned to an experimental and a control
group. The experimental group students were exposed with TGfU
approach and the control group with the Traditional Skill approach of
handball game. Game Performance Assessment Instrument (GPAI)
was used to measure students' tactical understanding and decision
making in 3 versus 3 handball game situations. Analysis of
covariance (ANCOVA) was used to analyze the data. The results
reveal that there was a significant difference between the TGfU
approach group and the traditional skill approach group students on
post test score (F (1, 69) = 248.83, p < .05). The findings of this
study suggested the importance of TGfU approach to improve
primary students’ tactical understanding and decision making in
handball game.
Abstract: Cement, the most widely used construction material
is very brittle and characterized by low tensile strength and strain
capacity. Macro to nano fibers are added to cement to provide
tensile strength and ductility to it. Carbon Nanotube (CNT), one of
the nanofibers, has proven to be a promising reinforcing material in
the cement composites because of its outstanding mechanical
properties and its ability to close cracks at the nano level. The
experimental investigations for CNT reinforced cement is costly,
time consuming and involves huge number of trials. Mathematical
modeling of CNT reinforced cement can be done effectively and
efficiently to arrive at the mechanical properties and to reduce the
number of trials in the experiments. Hence, an attempt is made to
numerically study the effective mechanical properties of CNT
reinforced cement numerically using Representative Volume
Element (RVE) method. The enhancement in its mechanical
properties for different percentage of CNTs is studied in detail.
Abstract: The aim of this study is to find out and analyze the
role of gender and age on the perceptions of students to the distant
online program offered by Vocational High School in Sakarya
University. The research is based on a questionnaire as a mean of
data collection method to find out the role of age and gender on the
student-s perceptions toward online education, and the study
progressed through finding relationships between the variables used
in the data collection instrument. The findings of the analysis
revealed that although the students registered to the online program
by will, they preferred the traditional face-to-face education due to
the difficulty of the nonverbal communication, their incompetence of
using the technology required, and their belief in traditional face-toface
learning more than online education.
Regarding gender, the results showed that the female students
have a better perception of the online education as opposed to the
male students. Regarding age, the results showed that the older the
students are the more is their preference towards attending face-toface
classes.
Abstract: A new OTA-based logarithmic-control variable gain
current amplifier (LCCA) is presented. It consists of two Operational
Transconductance Amplifier (OTA) and two PMOS transistors
biased in weak inversion region. The circuit operates from 0.6V DC
power supply and consumes 0.6 μW. The linear-dB controllable
output range is 43 dB with maximum error less than 0.5dB. The
functionality of the proposed design was confirmed using HSPICE in
0.35μm CMOS process technology.