Abstract: Image interpolation is a common problem in imaging applications. However, most interpolation algorithms in existence suffer visually to some extent the effects of blurred edges and jagged artifacts in the image. This paper presents an adaptive feature preserving bidirectional flow process, where an inverse diffusion is performed to enhance edges along the normal directions to the isophote lines (edges), while a normal diffusion is done to remove artifacts (''jaggies'') along the tangent directions. In order to preserve image features such as edges, angles and textures, the nonlinear diffusion coefficients are locally adjusted according to the first and second order directional derivatives of the image. Experimental results on synthetic images and nature images demonstrate that our interpolation algorithm substantially improves the subjective quality of the interpolated images over conventional interpolations.
Abstract: The performance of sensor-less controlled induction
motor drive depends on the accuracy of the estimated speed.
Conventional estimation techniques being mathematically complex
require more execution time resulting in poor dynamic response. The
nonlinear mapping capability and powerful learning algorithms of
neural network provides a promising alternative for on-line speed
estimation. The on-line speed estimator requires the NN model to be
accurate, simpler in design, structurally compact and computationally
less complex to ensure faster execution and effective control in real
time implementation. This in turn to a large extent depends on the
type of Neural Architecture. This paper investigates three types of
neural architectures for on-line speed estimation and their
performance is compared in terms of accuracy, structural
compactness, computational complexity and execution time. The
suitable neural architecture for on-line speed estimation is identified
and the promising results obtained are presented.
Abstract: This study was aimed to determine seasonal variations
of leaf nutrient concentrations to define nutrient needs related to
growing period and to compare irrigation programs in terms of
nutrient uptake. In this study,'Starkrimson Delicious' variety grafted
onto seedling rootstock was used during 2009-2010 growing seasons.
The study was conducted at E─ƒirdir Fruit Growing Research Station.
Leaf samples were taken in five different sample seasons (May, June,
July, August and September). Four different pan coefficients (0.50,
0.75, 1.0, 1.25) were applied during drip irrigation treatments in 7
days irrigation interval. Leaf K, Mg, Ca, P, Fe, Zn, Mn and Cu
concentrations were determined.
The results showed that among the seasonal changes, the highest
concentrations of K, Mg, P and Mn in leaves were recorded in May,
followed by a decrease in the other months, while in contrast Ca and
Fe showed the lowest concentration in May.
Results of the study demonstrate that among irrigation programs K
and Cu concentration in plants was significantly influenced. Cu
concentrations decreased with seasonal variations and different
irrigation programs. Thus, nutrient needs of 'Starkrimson Delicious'apple trees at different growth stages should be taken into
consideration before making effective fertilization program.
Abstract: Edge detection is usually the first step in medical
image processing. However, the difficulty increases when a
conventional kernel-based edge detector is applied to ultrasonic
images with a textural pattern and speckle noise. We designed an
adaptive diffusion filter to remove speckle noise while preserving the
initial edges detected by using a Sobel edge detector. We also propose
a genetic algorithm for edge selection to form complete boundaries of
the detected entities. We designed two fitness functions to evaluate
whether a criterion with a complex edge configuration can render a
better result than a simple criterion such as the strength of gradient.
The edges obtained by using a complex fitness function are thicker and
more fragmented than those obtained by using a simple fitness
function, suggesting that a complex edge selecting scheme is not
necessary for good edge detection in medical ultrasonic images;
instead, a proper noise-smoothing filter is the key.
Abstract: Monitoring and control of cane sugar crystallization
processes depend on the stability of the supersaturation (σ ) state.
The most widely used information to represent σ is the electrical
conductivity κ of the solutions. Nevertheless, previous studies point
out the shortcomings of this approach: κ may be regarded as
inappropriate to guarantee an accurate estimation of σ in impure
solutions. To improve the process control efficiency, additional
information is necessary. The mass of crystals in the solution ( c m )
and the solubility (mass ratio of sugar to water / s w m m ) are relevant
to complete information. Indeed, c m inherently contains information
about the mass balance and / s w m m contains information about the
supersaturation state of the solution. The main problem is that c m
and / s w m m are not available on-line. In this paper, a model based
soft-sensor is presented for a final crystallization stage (C sugar).
Simulation results obtained on industrial data show the reliability of
this approach, c m and the crystal content ( cc ) being estimated with
a sufficient accuracy for achieving on-line monitoring in industry
Abstract: The next generation wireless systems, especially the
cognitive radio networks aim at utilizing network resources more
efficiently. They share a wide range of available spectrum in an
opportunistic manner. In this paper, we propose a quality
management model for short-term sub-lease of unutilized spectrum
bands to different service providers. We built our model on
competitive secondary market architecture. To establish the
necessary conditions for convergent behavior, we utilize techniques
from game theory. Our proposed model is based on potential game
approach that is suitable for systems with dynamic decision making.
The Nash equilibrium point tells the spectrum holders the ideal price
values where profit is maximized at the highest level of customer
satisfaction. Our numerical results show that the price decisions of
the network providers depend on the price and QoS of their own
bands as well as the prices and QoS levels of their opponents- bands.
Abstract: Owning to the high-speed feed rate and ultra spindle
speed have been used in modern machine tools, the tool-path
generation plays a key role in the successful application of a
High-Speed Machining (HSM) system. Because of its importance in
both high-speed machining and tool-path generation, approximating a
contour by NURBS format is a potential function in CAD/CAM/CNC
systems. It is much more convenient to represent an ellipse by
parametric form than to connect points laboriously determined in a
CNC system. A new approximating method based on optimum
processes and NURBS curves of any degree to the ellipses is presented
in this study. Such operations can be the foundation of tool-radius
compensation interpolator of NURBS curves in CNC system. All
operating processes for a CAD tool is presented and demonstrated by
practical models.
Abstract: An evolutionary computing technique for solving initial value problems in Ordinary Differential Equations is proposed in this paper. Neural network is used as a universal approximator while the adaptive parameters of neural networks are optimized by genetic algorithm. The solution is achieved on the continuous grid of time instead of discrete as in other numerical techniques. The comparison is carried out with classical numerical techniques and the solution is found with a uniform accuracy of MSE ≈ 10-9 .
Abstract: Determining reasonable fees is the main objective of designing the cost estimation and payment systems for consultant contracts. However, project clients utilize different cost estimation and payment systems because of their varying views on the reasonableness of consultant fees. This study reviews the cost estimation and payment systems of consultant contracts for five countries, including the US (Washington State Department of Transportation), Japan (Ministry of Land, Infrastructure, Transport and Tourism), China (Engineering Design Charging Standard) and UK (Her Majesty's Treasure). Specifically, this work investigates the budgeting process, contractor selection method, contractual price negotiation process, cost review, and cost-control concept of the systems used in these countries. The main finding indicates that that project client-s view on whether the fee is high will affect the way he controls it. In the US, the fee is commonly considered to be high. As a result, stringent auditing system (low flexibility given to the consultant) is then applied. In the UK, the fee is viewed to be low by comparing it to the total life-cycle project cost. Thus, a system that has high flexibility in budgeting and cost reviewing is given to the consultant. In terms of the flexibility allowed for the consultant, the systems applied in Japan and China fall between those of the US and UK. Both the US and UK systems are helpful in determining a reasonable fee. However, in the US system, rigid auditing standards must be established and additional cost-audit manpower is required. In the UK system, sufficient historical cost data should be needed to evaluate the reasonableness of the consultant-s proposed fee
Abstract: When a lightning strike falls near an overhead power
line, the intense electromagnetic field radiated by the current of the
lightning return stroke coupled with power lines and there induced
transient overvoltages, which can cause a back-flashover in electrical
network. The indirect lightning represents a major danger owing to
the fact that it is more frequent than that which results from the direct
strikes.
In this paper we present an analysis of the electromagnetic
coupling between an external electromagnetic field generated by the
lightning and an electrical overhead lines, so we give an important
and original contribution: We are based on our experimental
measurements which we carried in the high voltage laboratories of
EPFL in Switzerland during the last trimester of 2005, on the recent
works of other authors and with our mathematical improvement a
new particular analytical expression of the electromagnetic field
generated by the lightning return stroke was developed and presented
in this paper. The results obtained by this new electromagnetic field
formulation were compared with experimental results and give a
reasonable approach.
Abstract: Materials added to the matrix help improving operating properties of a composite. This experimental study has targeted to investigate this aim where Silicon Oxide particles were added to glass fibre and epoxy resin at an amount of 15% to the main material to obtain a sort of new composite material. Erosive wear behavior of epoxy-resin dipped composite materials reinforced with glass fibre and Silicon Oxide under three different impingement angles (30°, 60° and 90°), three different impact velocities (23, 34 and 53 m/s), two different angular Aluminum abrasive particle sizes (approximately 200 and 400 μm) and the fibre orientation of 45° (45/-45) were investigated. In the test results, erosion rates were obtained as functions of impingement angles, impact velocities, particle sizes and fibre orientation. Moreover, materials with addition of Silicon Oxide filler material exhibited lower wear as compared to neat materials with no added filler material. In addition, SEM views showing worn out surfaces of the test specimens were scrutinized.
Abstract: In order to study the effect of phosphate solubilization
microorganisms (PSM) and plant growth promoting rhizobacteria
(PGPR) on yield and yield components of corn Zea mays (L. cv.
SC604) an experiment was conducted at research farm of Sari
Agricultural Sciences and Natural Resources University, Iran during
2007. Experiment laid out as split plot based on randomized
complete block design with three replications. Three levels of
manures (consisted of 20 Mg.ha-1 farmyard manure, 15 Mg.ha-1 green
manure and check or without any manures) as main plots and eight
levels of biofertilizers (consisted of 1-NPK or conventional fertilizer
application; 2-NPK+PSM+PGPR; 3 NP50%K+PSM+PGPR; 4-
N50%PK+PSM +PGPR; 5-N50%P50%K+PSM+ PGPR; 6-PK+PGPR; 7-
NK+PSM and 8-PSM+PGPR) as sub plots were treatments. Results
showed that farmyard manure application increased row number, ear
weight, grain number per ear, grain yield, biological yield and
harvest index compared to check. Furthermore, using of PSM and
PGPR in addition to conventional fertilizer applications (NPK) could
improve ear weight, row number and grain number per row and
ultimately increased grain yield in green manure and check plots.
According to results in all fertilizer treatments application of PSM
and PGPR together could reduce P application by 50% without any
significant reduction of grain yield. However, this treatment could
not compensate 50% reduction of N application.
Abstract: The abnormal increase in the number of applications available for download in Android markets is a good indication that they are being reused. However, little is known about their real reusability potential. A considerable amount of these applications is reported as having a poor quality or being malicious. Hence, in this paper, an approach to measure the reusability potential of classes in Android applications is proposed. The approach is not meant specifically for this particular type of applications. Rather, it is intended for Object-Oriented (OO) software systems in general and aims also to provide means to discard the classes of low quality and defect prone applications from being reused directly through inheritance and instantiation. An empirical investigation is conducted to measure and rank the reusability potential of the classes of randomly selected Android applications. The results obtained are thoroughly analyzed in order to understand the extent of this potential and the factors influencing it.
Abstract: The Egyptian Bacillus thuringiensis isolate (M5) produce crystal proteins that is toxic against insects was irradiated with UV light to induce mutants. Upon testing 10 of the resulting mutants for their toxicity against cotton leafworm larvae, the three mutants 62, 64 and 85 proved to be the most toxic ones. Upon testing these mutants along with their parental isolate by SDS-PAGE analysis of spores-crystals proteins as well as vegetative cells proteins, new induced bands appeared in the three mutants by UV radiation and also they showed disappearance of some other bands as compared with the wild type isolate. Multiplex PCR technique, with five sets of specific primers, was used to detect the three types of cryI genes cryIAa, cryIAb and cryIAc. Results showed that these three genes exist, as distinctive bands, in the wild type isolate (M5) as well as in mutants 62 and 85, while the mutant 64 had two distinctive bands of cryIAb and cryIAc genes, and a faint band of cryI Aa gene. Finally, these results revealed that mutant 62 is considered as the promising mutant since it is UV resistant, highly toxic against Spodoptera littoralis and active against a wide range of Lepidopteran insects.
Abstract: Face recognition in the infrared spectrum has attracted a lot of interest in recent years. Many of the techniques used in infrared are based on their visible counterpart, especially linear techniques like PCA and LDA. In this work, we introduce a probabilistic Bayesian framework for face recognition in the infrared spectrum. In the infrared spectrum, variations can occur between face images of the same individual due to pose, metabolic, time changes, etc. Bayesian approaches permit to reduce intrapersonal variation, thus making them very interesting for infrared face recognition. This framework is compared with classical linear techniques. Non linear techniques we developed recently for infrared face recognition are also presented and compared to the Bayesian face recognition framework. A new approach for infrared face extraction based on SVM is introduced. Experimental results show that the Bayesian technique is promising and lead to interesting results in the infrared spectrum when a sufficient number of face images is used in an intrapersonal learning process.
Abstract: The main objective of this paper is to investigate the
enhancement of power system stability via coordinated tuning of
Power System Stabilizers (PSSs) in a multi-machine power system.
The design problem of the proposed controllers is formulated as an
optimization problem. Chaotic catfish particle swarm optimization
(C-Catfish PSO) algorithm is used to minimize the ITAE objective
function. The proposed algorithm is evaluated on a two-area, 4-
machines system. The robustness of the proposed algorithm is
verified on this system under different operating conditions and
applying a three-phase fault. The nonlinear time-domain simulation
results and some performance indices show the effectiveness of the
proposed controller in damping power system oscillations and this
novel optimization algorithm is compared with particle swarm
optimization (PSO).
Abstract: The objective of this study was to determine the accuracy to estimation fetal weight by Johnson-s method and compares it with actual birth weight. The sample group was 126 infants delivered in Dan KhunThot hospital from January March 2012. Fetal weight was estimated by measuring fundal height according to Johnson-s method. The information was collected by studying historical delivery records and then analyzed by using the statistics of frequency, percentage, mean, and standard deviation. Finally, the difference was analyzed by a paired t-test.The results showed had an average birth weight was 3093.57 ± 391.03 g (mean ± SD) and 3,455 ± 454.55 g average estimated fetal weight by Johnson-s method higher than average actual birth weight was 384.09 grams. When classifying the infants according to birth weight found that low birth weight ( 4000 g) actual birth weight was more than estimated fetal weight. The difference was found between actual birth weight and estimation fetal weight of the minimum weight in high birth weight ( > 4000 g) , the appropriate birth weight (2500-3999g) and low birth weight (
Abstract: This research was conducted in the Lower Ping River
Basin downstream of the Bhumibol Dam and the Lower Wang River
Basin in Tak Province, Thailand. Most of the tributary streams of the
Ping can be considered as ungauged catchments. There are 10-
pumping station installation at both river banks of the Ping in Tak
Province. Recently, most of them could not fully operate due to the
water amount in the river below the level that would be pumping,
even though included water from the natural river and released flow
from the Bhumibol Dam. The aim of this research was to increase the
performance of those pumping stations using weir projects in the
Ping. Therefore, the river analysis system model (HEC-RAS) was
applied to study the hydraulic behavior of water surface profiles in
the Ping River with both cases of existing conditions and proposed
weirs during the violent flood in 2011 and severe drought in 2013.
Moreover, the hydrologic modeling system (HMS) was applied to
simulate lateral streamflow hydrograph from ungauged catchments of
the Ping. The results of HEC-RAS model calibration with existing
conditions in 2011 showed best trial roughness coefficient for the
main channel of 0.026. The simulated water surface levels fitted to
observation data with R2 of 0.8175. The model was applied to 3
proposed cascade weirs with 2.35 m in height and found surcharge
water level only 0.27 m higher than the existing condition in 2011.
Moreover, those weirs could maintain river water levels and increase
of those pumping performances during less river flow in 2013.
Abstract: In recent years, real estate prediction or valuation has
been a topic of discussion in many developed countries. Improper
hype created by investors leads to fluctuating prices of real estate,
affecting many consumers to purchase their own homes. Therefore,
scholars from various countries have conducted research in real estate
valuation and prediction. With the back-propagation neural network
that has been popular in recent years and the orthogonal array in the
Taguchi method, this study aimed to find the optimal parameter
combination at different levels of orthogonal array after the system
presented different parameter combinations, so that the artificial
neural network obtained the most accurate results. The experimental
results also demonstrated that the method presented in the study had a
better result than traditional machine learning. Finally, it also showed
that the model proposed in this study had the optimal predictive effect,
and could significantly reduce the cost of time in simulation operation.
The best predictive results could be found with a fewer number of
experiments more efficiently. Thus users could predict a real estate
transaction price that is not far from the current actual prices.
Abstract: An analysis of a synchronous generator in a bond
graph approach is proposed. This bond graph allows to determine the
simplified models of the system by using singular perturbations.
Firstly, the nonlinear bond graph of the generator is linearized. Then,
the slow and fast state equations by applying singular perturbations
are obtained. Also, a bond graph to get the quasi-steady state of the
slow dynamic is proposed. In order to verify the effectiveness of the
singularly perturbed models, simulation results of the complete
system and reduced models are shown.