Effects of Silicon Oxide Filler Material and Fibre Orientation on Erosive Wear of GF/EP Composites
Materials added to the matrix help improving operating properties of a composite. This experimental study has targeted to investigate this aim where Silicon Oxide particles were added to glass fibre and epoxy resin at an amount of 15% to the main material to obtain a sort of new composite material. Erosive wear behavior of epoxy-resin dipped composite materials reinforced with glass fibre and Silicon Oxide under three different impingement angles (30°, 60° and 90°), three different impact velocities (23, 34 and 53 m/s), two different angular Aluminum abrasive particle sizes (approximately 200 and 400 μm) and the fibre orientation of 45° (45/-45) were investigated. In the test results, erosion rates were obtained as functions of impingement angles, impact velocities, particle sizes and fibre orientation. Moreover, materials with addition of Silicon Oxide filler material exhibited lower wear as compared to neat materials with no added filler material. In addition, SEM views showing worn out surfaces of the test specimens were scrutinized.
[1] I. Finnie, "Erosion of surfaces by solid particles," Wear, vol. 3, pp. 87-
103, 1960.
[2] I. M. Hutchings, "The erosion of ductile metals by solid particles," Ph.D.
Dissertation, University of Cambridge, 1974.
[3] J. Zahavi and G. F. Schmitt, "Solid particle erosion of reinforced
composite materials," Wear, vol. 71, pp. 179-190, 1981.
[4] V. K. Srivastava, R. Prakash, and P. S. Shembekar, "Fracture behaviour
of fly ash filled FRP composites," Composite Structure, vol. 10, pp.
271-279, 1988.
[5] U. S. Tewari, A. P. Harsha, A. M. Hager and K. Friedrich, "Solid
particle erosion of carbon fibre- and glass fibre-epoxy composites,"
Composites Science and Technology, vol. 63, no. 3-4, pp. 549-557,
2003.
[6] M. Bagci and H. Imrek, "Solid particle erosion wear of GF/EP
composites with added Al2O3, AIP Conference Proceedings, vol. 1315,
pp. 1389-1394, 2010.
[7] V. K. Srivastava and A. G. Pawar, "Solid particle erosion of glass fibre
reinforced flyash filled epoxy resin composites," Composites Science
and Technology, vol. 66, no. 15, pp. 3021-3028, 2006.
[8] A. Patnaik, A. Satapathy, N. Chand, N. M. Barkoula and S. Biswas,
"Solid particle erosion wear characteristics of fiber and particulate filled
polymercomposites: a review," Wear, vol. 268, pp. 249-263, 2010.
[9] A. P. Harsha and S. K. Jha, "Erosive wear studies of epoxy-based
composites at normal incidence," Wear, vol. 265, pp. 1129-1135, 2008.
[10] K.V. Pool, C. K. H. Dharan and I. Finnie, "Erosive wear of composite
materials," Wear, vol. 107, no. 1, pp. 1-12, 1986.
[11] G. P. Tilly and W. Sage, "The interaction of particle and material
behavior in erosion process," Wear, vol. 16, pp. 447-465, 1970.
[12] A. Kim and I. Kim, "Solid particle erosion of CFRP composite with
different laminate orientations," Wear, vol. 267, pp. 1922-1926, 2009.
[13] A. W. Ruff and L. K. Ives, "Measurement of solid particle velocity in
erosive wear," Wear, vol. 35, pp. 195-199, 1975.
[14] H. Imrek, M. Bagci and O. M. Khalfan, "Solid particle erosion of SiO2
reinforced epoxy composites," 13th International Materials Symposium,
Pamukkale, October 13.-15., 2010.
[15] J. J. Rajesh, J. Bijwe, B. Venkataraman and U. S. Tewari, "Effect of
impinging velocity on the erosive wear behaviour of polyamides,"
Tribology International, vol. 37, pp. 219-226, 2004.
[16] R. Rattan and J. Bijwe, "Influence of impingement angle on solid
particle erosion of carbon fabric reinforced polyetherimide composite,"
Wear, vol. 262, pp. 568-574, 2007.
[17] N.-M. Barkoula and J. Karger-Kocsis, "Solid particle erosion of
unidirectional GF reinforced EP composites with different fiber/matrix
adhesion," Journal of Reinforced Plastics and Composites, vol. 21, no.
15, pp. 1377-1388, 2002.
[18] M. Bagci, "Investigation of erosion wear behaviour of glass fibre
reinforced composite materials," Ph.D. Thesis, The Graduate School of
Natural and Applied Science of Selcuk University, 2010.
[1] I. Finnie, "Erosion of surfaces by solid particles," Wear, vol. 3, pp. 87-
103, 1960.
[2] I. M. Hutchings, "The erosion of ductile metals by solid particles," Ph.D.
Dissertation, University of Cambridge, 1974.
[3] J. Zahavi and G. F. Schmitt, "Solid particle erosion of reinforced
composite materials," Wear, vol. 71, pp. 179-190, 1981.
[4] V. K. Srivastava, R. Prakash, and P. S. Shembekar, "Fracture behaviour
of fly ash filled FRP composites," Composite Structure, vol. 10, pp.
271-279, 1988.
[5] U. S. Tewari, A. P. Harsha, A. M. Hager and K. Friedrich, "Solid
particle erosion of carbon fibre- and glass fibre-epoxy composites,"
Composites Science and Technology, vol. 63, no. 3-4, pp. 549-557,
2003.
[6] M. Bagci and H. Imrek, "Solid particle erosion wear of GF/EP
composites with added Al2O3, AIP Conference Proceedings, vol. 1315,
pp. 1389-1394, 2010.
[7] V. K. Srivastava and A. G. Pawar, "Solid particle erosion of glass fibre
reinforced flyash filled epoxy resin composites," Composites Science
and Technology, vol. 66, no. 15, pp. 3021-3028, 2006.
[8] A. Patnaik, A. Satapathy, N. Chand, N. M. Barkoula and S. Biswas,
"Solid particle erosion wear characteristics of fiber and particulate filled
polymercomposites: a review," Wear, vol. 268, pp. 249-263, 2010.
[9] A. P. Harsha and S. K. Jha, "Erosive wear studies of epoxy-based
composites at normal incidence," Wear, vol. 265, pp. 1129-1135, 2008.
[10] K.V. Pool, C. K. H. Dharan and I. Finnie, "Erosive wear of composite
materials," Wear, vol. 107, no. 1, pp. 1-12, 1986.
[11] G. P. Tilly and W. Sage, "The interaction of particle and material
behavior in erosion process," Wear, vol. 16, pp. 447-465, 1970.
[12] A. Kim and I. Kim, "Solid particle erosion of CFRP composite with
different laminate orientations," Wear, vol. 267, pp. 1922-1926, 2009.
[13] A. W. Ruff and L. K. Ives, "Measurement of solid particle velocity in
erosive wear," Wear, vol. 35, pp. 195-199, 1975.
[14] H. Imrek, M. Bagci and O. M. Khalfan, "Solid particle erosion of SiO2
reinforced epoxy composites," 13th International Materials Symposium,
Pamukkale, October 13.-15., 2010.
[15] J. J. Rajesh, J. Bijwe, B. Venkataraman and U. S. Tewari, "Effect of
impinging velocity on the erosive wear behaviour of polyamides,"
Tribology International, vol. 37, pp. 219-226, 2004.
[16] R. Rattan and J. Bijwe, "Influence of impingement angle on solid
particle erosion of carbon fabric reinforced polyetherimide composite,"
Wear, vol. 262, pp. 568-574, 2007.
[17] N.-M. Barkoula and J. Karger-Kocsis, "Solid particle erosion of
unidirectional GF reinforced EP composites with different fiber/matrix
adhesion," Journal of Reinforced Plastics and Composites, vol. 21, no.
15, pp. 1377-1388, 2002.
[18] M. Bagci, "Investigation of erosion wear behaviour of glass fibre
reinforced composite materials," Ph.D. Thesis, The Graduate School of
Natural and Applied Science of Selcuk University, 2010.
@article{"International Journal of Chemical, Materials and Biomolecular Sciences:61871", author = "M. Bagci and H. Imrek and Omari M. Khalfan", title = "Effects of Silicon Oxide Filler Material and Fibre Orientation on Erosive Wear of GF/EP Composites", abstract = "Materials added to the matrix help improving operating properties of a composite. This experimental study has targeted to investigate this aim where Silicon Oxide particles were added to glass fibre and epoxy resin at an amount of 15% to the main material to obtain a sort of new composite material. Erosive wear behavior of epoxy-resin dipped composite materials reinforced with glass fibre and Silicon Oxide under three different impingement angles (30°, 60° and 90°), three different impact velocities (23, 34 and 53 m/s), two different angular Aluminum abrasive particle sizes (approximately 200 and 400 μm) and the fibre orientation of 45° (45/-45) were investigated. In the test results, erosion rates were obtained as functions of impingement angles, impact velocities, particle sizes and fibre orientation. Moreover, materials with addition of Silicon Oxide filler material exhibited lower wear as compared to neat materials with no added filler material. In addition, SEM views showing worn out surfaces of the test specimens were scrutinized.
", keywords = "Erosive wear, fibre orientation, GF/EP, silicon oxide.", volume = "5", number = "6", pages = "515-5", }
