Abstract: According to investigating impact of complexity of
stereoscopic frame pairs on stereoscopic video coding and
transmission, a new rate control algorithm is presented. The proposed
rate control algorithm is performed on three levels: stereoscopic group
of pictures (SGOP) level, stereoscopic frame (SFrame) level and
frame level. A temporal-spatial frame complexity model is firstly
established, in the bits allocation stage, the frame complexity, position
significance and reference property between the left and right frames
are taken into account. Meanwhile, the target buffer is set according to
the frame complexity. Experimental results show that the proposed
method can efficiently control the bitrates, and it outperforms the fixed
quantization parameter method from the rate distortion perspective,
and average PSNR gain between rate-distortion curves (BDPSNR) is
0.21dB.
Abstract: In this paper, we consider a risk model involving two independent classes of insurance risks and random premium income. We assume that the premium income process is a Poisson Process, and the claim number processes are independent Poisson and generalized Erlang(n) processes, respectively. Both of the Gerber- Shiu functions with zero initial surplus and the probability generating functions (p.g.f.) of the Gerber-Shiu functions are obtained.
Abstract: The Taiwan government has invested approximately
21 billion NT dollars in the construction of bicycle paths since
bicycling has gained huge popularity as a healthy leisure and
recreational activity. This study focuses on the behavior of
recreational bicyclists in Danshuei and Bali, northern Taiwan. Data
were collected from a field investigation carried out along the
Danshuei bicycle path and Bali left-bank bicycle path. A total of 578
questionnaires were gathered for data analysis. Descriptive statistics
and Chi-Square tests were used to assess bicyclists- behaviors. The
frequency shows that, in these areas, Danshuei and Bali, most
bicyclists rented bicycles, rode the bicycle path in the afternoon for
about 2 hours. The used the bicycle path one time per week. For most,
it was the first time to ride these bicycle paths. There were significant
differences in distribution of bicycle ownership, time of day, duration
of ride, ride frequency, and whether riding occurred on weekdays or
weekends. Results indicated that most bicyclists in Danshuei and Bali
were infrequent users.
Abstract: This paper presents an overview of current municipal
solid waste management in Khoram Abad city.
According to data collected by the local authorities, the waste
generation rate is estimated to be 800 g/cap.d with density of 243
kg/m3. Solid waste is stored in different types of containers at the
source of generation in different areas of the city.
Local Authority is responsible for waste collection, transportation.
Municipality is responsible for waste collection, using private sector
contracts.
At present, both mechanical and manual methods are used to
collect residential waste. Manual methods of collection are the most
commonly used for waste collection in most parts of the city.
Land filling is the main disposal method in this city. But it has
some obvious problem and deficiencies
The current state of solid waste management has been improved
slightly in the last decade. By more actions can reduce the human and
environmental risks.
Abstract: IEEE 802.15.4a impulse radio-time hopping ultra wide
band (IR-TH UWB) physical layer, due to small duty cycle and very
short pulse widths is robust against multipath propagation. However,
scattering and reflections with the large number of obstacles in indoor
channel environments, give rise to dense multipath fading. It imposes
serious problem to optimum Rake receiver architectures, for which
very large number of fingers are needed. Presence of strong noise
also affects the reception of fine pulses having extremely low power
spectral density. A robust SRake receiver for IEEE 802.15.4a IRTH
UWB in dense multipath and additive white Gaussian noise
(AWGN) is proposed to efficiently recover the weak signals with
much reduced complexity. It adaptively increases the signal to noise
(SNR) by decreasing noise through a recursive least square (RLS)
algorithm. For simulation, dense multipath environment of IEEE
802.15.4a industrial non line of sight (NLOS) is employed. The power
delay profile (PDF) and the cumulative distribution function (CDF)
for the respective channel environment are found. Moreover, the error
performance of the proposed architecture is evaluated in comparison
with conventional SRake and AWGN correlation receivers. The
simulation results indicate a substantial performance improvement
with very less number of Rake fingers.
Abstract: This paper examines the modeling and analysis of a
cruise control system using a Petri net based approach, task graphs,
invariant analysis and behavioral properties. It shows how the
structures used can be verified and optimized.
Abstract: This paper presents a new color face image database
for benchmarking of automatic face detection algorithms and human
skin segmentation techniques. It is named the VT-AAST image
database, and is divided into four parts. Part one is a set of 286 color
photographs that include a total of 1027 faces in the original format
given by our digital cameras, offering a wide range of difference in
orientation, pose, environment, illumination, facial expression and
race. Part two contains the same set in a different file format. The
third part is a set of corresponding image files that contain human
colored skin regions resulting from a manual segmentation
procedure. The fourth part of the database has the same regions
converted into grayscale. The database is available on-line for
noncommercial use. In this paper, descriptions of the database
development, organization, format as well as information needed for
benchmarking of algorithms are depicted in detail.
Abstract: Arenga pinnata is an abundantly natural fiber that can be used for sound proof material. However, the scientific data of acoustics properties of Arenga pinnata was not available yet. In this study the sound absorption of pure arenga pinnata was measured. The thickness of Arenga pinnata was varied in 10 mm, 20 mm, 30mm, and 40mm. This work was carried out to investigate the potential of using Arenga pinnata fiber as raw material for sound absorbing material. Impedance Tube Method was used to measure sound absorption coefficient (α). The Measurements was done in accordance with ASTM E1050-98, that is the standard test method for impedance and absorption of acoustical materials using a tube, two microphones and a digital frequency analysis system . The results showed that sound absorption coefficients of Arenga pinnata were good from 2000 Hz to 5000 Hz within the range of 0.75 – 0.90. The optimum sound absorption coefficient was obtained from the thickness of 40 mm. These results indicated that Arenga pinnata fiber is promising to be used as raw material of sound absorbing material with low cost, light, and biodegradable.
Abstract: This research presents a system for post processing of
data that takes mined flat rules as input and discovers crisp as well as
fuzzy hierarchical structures using Learning Classifier System
approach. Learning Classifier System (LCS) is basically a machine
learning technique that combines evolutionary computing,
reinforcement learning, supervised or unsupervised learning and
heuristics to produce adaptive systems. A LCS learns by interacting
with an environment from which it receives feedback in the form of
numerical reward. Learning is achieved by trying to maximize the
amount of reward received. Crisp description for a concept usually
cannot represent human knowledge completely and practically. In the
proposed Learning Classifier System initial population is constructed
as a random collection of HPR–trees (related production rules) and
crisp / fuzzy hierarchies are evolved. A fuzzy subsumption relation is
suggested for the proposed system and based on Subsumption Matrix
(SM), a suitable fitness function is proposed. Suitable genetic
operators are proposed for the chosen chromosome representation
method. For implementing reinforcement a suitable reward and
punishment scheme is also proposed. Experimental results are
presented to demonstrate the performance of the proposed system.
Abstract: This study aims to investigate how much both son and
daughter trust their father and what are the underlying reasons they
trust their father. The results revealed five main reasons why
Malaysian adolescents trust their father. Those reasons are related to
the role of father, father-child relationship, father-s characteristics,
father-s nurturing nature and father-s attitude and behavior. A total of
1022 students (males = 241, females = 781) from one of public
university in Sabah, Malaysia participated in the study. The
participants completed open-ended questionnaires developed by Kim
(2008), asking how much the adolescents trust their father, and the
reasons why they trust their father. The data was analysed by using
the indigenous psychology method proposed by [1] Findings of this
study revealed the pattern of trust towards father for both Malaysian
male and female adolescents. The results contributed new
information about Malaysian adolescents- trust towards their father
form the indigenous context. The implications of finding will be
discussed.
Abstract: The aim of this paper is to determine Frenet-Serret invariants of non-null curves in Lorentzian 5-space. First, we define a vector product of four vectors, by this way, we present a method to calculate Frenet-Serret invariants of the non-null curves. Additionally, an algebraic example of presented method is illustrated.
Abstract: Mega urban transport projects (MUTPs) are
increasingly being used in urban environments to ameliorate the
problem of congestion. However, a number of problems with regard
to mega projects have been identified. In particular the seemingly
institutionalised over estimation of economic benefits and persistent
cost over runs, could mean that the wrong projects are selected, and
that the projects that are selected cost more than they should. Studies
to date have produced a number of solutions to these problems,
perhaps most notably, the various methods for the inclusion of the
private sector in project provision. However the problems have
shown significant intractability in the face of these solutions. This
paper provides a detailed examination of some of the problems
facing mega projects and then examines Foucault-s theory of
'governmentality' as a possible frame of analysis which might shed
light on the intractability of the problems that have been identified,
through an identification of the art of government in which MUTPs
occur.
Abstract: The counter flow solar air heaters, with four
transverse fins and wire mesh layers are constructed and investigated
experimentally for thermal efficiency at a geographic location of
Cyprus in the city of Famagusta. The absorber plate is replaced by
sixteen steel wire mesh layers, 0.18 x 0.18cm in cross section
opening and a 0.02cm in diameter. The wire mesh layers arranged in
three groups, first and second include 6 layers, while the third include
4 layers. All layers fixed in the duct parallel to the glazing and each
group separated from the others by wood frame thickness of 0.5cm to
reduce the pressure drop. The transverse fins arranged in a way to
force the air to flow through the bed like eight letter path with flow
depth 3cm. The proposed design has increased the heat transfer rate,
but on other hand causes a high pressure drop. The obtained results
show that, for air mass flow rate range between 0.011-0.036kg/s, the
thermal efficiency increases with increasing the air mass flow. The
maximum efficiency obtained is 65.6% for the mass flow rate of
0.036kg/s. Moreover, the temperature difference between the outlet
flow and the ambient temperature, ΔT, reduces as the air mass flow
rate increase. The maximum difference between the outlet and
ambient temperature obtained was 43°C for double pass for minimum
mass flow rate of 0.011kg/s. Comparison with a conventional solar
air heater collector shows a significantly development in the thermal
efficiency.
Abstract: In manufacturing industries, development of measurement leads to increase the number of monitoring variables and eventually the importance of multivariate control comes to the fore. Statistical process control (SPC) is one of the most widely used as multivariate control chart. Nevertheless, SPC is restricted to apply in processes because its assumption of data as following specific distribution. Unfortunately, process data are composed by the mixture of several processes and it is hard to estimate as one certain distribution. To alternative conventional SPC, therefore, nonparametric control chart come into the picture because of the strength of nonparametric control chart, the absence of parameter estimation. SVDD based control chart is one of the nonparametric control charts having the advantage of flexible control boundary. However,basic concept of SVDD has been an oversight to the important of data characteristic, density distribution. Therefore, we proposed DW-SVDD (Density Weighted SVDD) to cover up the weakness of conventional SVDD. DW-SVDD makes a new attempt to consider dense of data as introducing the notion of density Weight. We extend as control chart using new proposed SVDD and a simulation study of various distributional data is conducted to demonstrate the improvement of performance.
Abstract: Recordings from recent earthquakes have provided evidence that ground motions in the near field of a rupturing fault differ from ordinary ground motions, as they can contain a large energy, or “directivity" pulse. This pulse can cause considerable damage during an earthquake, especially to structures with natural periods close to those of the pulse. Failures of modern engineered structures observed within the near-fault region in recent earthquakes have revealed the vulnerability of existing RC buildings against pulse-type ground motions. This may be due to the fact that these modern structures had been designed primarily using the design spectra of available standards, which have been developed using stochastic processes with relatively long duration that characterizes more distant ground motions. Many recently designed and constructed buildings may therefore require strengthening in order to perform well when subjected to near-fault ground motions. Fiber Reinforced Polymers are considered to be a viable alternative, due to their relatively easy and quick installation, low life cycle costs and zero maintenance requirements. The objective of this paper is to investigate the adequacy of Artificial Neural Networks (ANN) to determine the three dimensional dynamic response of FRP strengthened RC buildings under the near-fault ground motions. For this purpose, one ANN model is proposed to estimate the base shear force, base bending moments and roof displacement of buildings in two directions. A training set of 168 and a validation set of 21 buildings are produced from FEA analysis results of the dynamic response of RC buildings under the near-fault earthquakes. It is demonstrated that the neural network based approach is highly successful in determining the response.
Abstract: The changing economic climate has made global
manufacturing a growing reality over the last decade, forcing
companies from east and west and all over the world to
collaborate beyond geographic boundaries in the design,
manufacture and assemble of products. The ISO10303 and
ISO14649 Standards (STEP and STEP-NC) have been
developed to introduce interoperability into manufacturing
enterprises so as to meet the challenge of responding to
production on demand. This paper describes and illustrates a
STEP compliant CAD/CAPP/CAM System for the manufacture
of rotational parts on CNC turning centers. The information
models to support the proposed system together with the data
models defined in the ISO14649 standard used to create the NC
programs are also described. A structured view of a STEP
compliant CAD/CAPP/CAM system framework supporting the
next generation of intelligent CNC controllers for turn/mill
component manufacture is provided. Finally a proposed
computational environment for a STEP-NC compliant system
for turning operations (SCSTO) is described. SCSTO is the
experimental part of the research supported by the specification
of information models and constructed using a structured
methodology and object-oriented methods. SCSTO was
developed to generate a Part 21 file based on machining
features to support the interactive generation of process plans
utilizing feature extraction. A case study component has been
developed to prove the concept for using the milling and turning
parts of ISO14649 to provide a turn-mill CAD/CAPP/CAM
environment.
Abstract: This paper presents an iterative algorithm to find a
inverse kinematic solution of 5-DOF robot. The algorithm is to
minimize the iteration number. Since the 5-DOF robot cannot give full
orientation of tool. Only z-direction of tool is satisfied while rotation
of tool is determined by kinematic constraint. This work therefore
described how to specify the tool direction and let the tool rotation free.
The simulation results show that this algorithm effectively worked.
Using the proposed iteration algorithm, error due to inverse kinematics
converged to zero rapidly in 5 iterations. This algorithm was applied in
real welding robot and verified through various practical works.
Abstract: The performance of modified Fenton (MF) treatment
to promote PAH oxidation in artificially contaminated soil was
investigated in packed soil column with a hydrogen peroxide (H2O2)
delivery system simulating in situ injection. Soil samples were spiked
with phenanthrene (low molecular weight PAH) and fluoranthene
(high molecular weight PAH) to an initial concentration of 500
mg/kg dried soil each. The effectiveness of process parameters
H2O2/soil, iron/soil, chelating agent/soil weight ratios and reaction
time were studied using a 24 three level factorial design experiments.
Statistically significant quadratic models were developed using
Response Surface Methodology (RSM) for degrading PAHs from the
soil samples. Optimum operating condition was achieved at mild
range of H2O2/soil, iron/soil and chelating agent/soil weight ratios,
indicating cost efficient method for treating highly contaminated
lands.
Abstract: This paper presents the development of a hybrid
thermal model for the EVO Electric AFM 140 Axial Flux Permanent
Magnet (AFPM) machine as used in hybrid and electric vehicles. The
adopted approach is based on a hybrid lumped parameter and finite
difference method. The proposed method divides each motor
component into regular elements which are connected together in a
thermal resistance network representing all the physical connections
in all three dimensions. The element shape and size are chosen
according to the component geometry to ensure consistency. The
fluid domain is lumped into one region with averaged heat transfer
parameters connecting it to the solid domain. Some model parameters
are obtained from Computation Fluid Dynamic (CFD) simulation and
empirical data. The hybrid thermal model is described by a set of
coupled linear first order differential equations which is discretised
and solved iteratively to obtain the temperature profile. The
computation involved is low and thus the model is suitable for
transient temperature predictions. The maximum error in temperature
prediction is 3.4% and the mean error is consistently lower than the
mean error due to uncertainty in measurements. The details of the
model development, temperature predictions and suggestions for
design improvements are presented in this paper.
Abstract: Microwave energy can be used for drying purpose. It is unique process. It is distinctly different from conventional drying process. It is advantageous over conventional drying / heating processes. When microwave energy is used for drying purpose, the process can be accelerated with a better control to achieve uniform heating, more conversion efficiency, selective drying and ultimately improved product quality of the output. Also, less floor space and compact system are the added advantages. Existing low power microwave drying system is to be modified with suitable applicator. Appropriate sensors are to be used to measure parameters like moisture, temperature, weight of sample. Suitable high tech controller is to be used to control microwave power continuously from minimum to maximum. Phase - controller, cycle - controller and PWM - controller are some of the advanced power control techniques. It has been proposed to work on turmeric using high-tech phase controller to control the microwave power conveniently. The drying of turmeric with microwave energy employing phase controller gives better results as formulated in this paper and hence new approach of processing turmeric will open future doors of profit making to allied industries and the farmers.