Abstract: In Blind Source Separation (BSS) processing, taking
advantage of scaling factor indetermination and based on the floatingpoint
representation, we propose a scaling technique applied to the
separation matrix, to avoid the saturation or the weakness in the
recovered source signals. This technique performs an Automatic Gain
Control (AGC) in an on-line BSS environment. We demonstrate
the effectiveness of this technique by using the implementation of
a division free BSS algorithm with two input, two output. This
technique is computationally cheaper and efficient for a hardware
implementation.
Abstract: Server provisioning is one of the most attractive topics in virtualization systems. Virtualization is a method of running multiple independent virtual operating systems on a single physical computer. It is a way of maximizing physical resources to maximize the investment in hardware. Additionally, it can help to consolidate servers, improve hardware utilization and reduce the consumption of power and physical space in the data center. However, management of heterogeneous workloads, especially for resource utilization of the server, or so called provisioning becomes a challenge. In this paper, a new concept for managing workloads based on user behavior is presented. The experimental results show that user behaviors are different in each type of service workload and time. Understanding user behaviors may improve the efficiency of management in provisioning concept. This preliminary study may be an approach to improve management of data centers running heterogeneous workloads for provisioning in virtualization system.
Abstract: In this paper we study the inverse eigenvalue problem for symmetric special matrices and introduce sufficient conditions for obtaining nonnegative matrices. We get the HROU algorithm from [1] and introduce some extension of this algorithm. If we have some eigenvectors and associated eigenvalues of a matrix, then by this extension we can find the symmetric matrix that its eigenvalue and eigenvectors are given. At last we study the special cases and get some remarkable results.
Abstract: We describe an effective method for image encryption
which employs magnitude and phase manipulation using carrier
images. Although it involves traditional methods like magnitude and
phase encryptions, the novelty of this work lies in deploying the
concept of carrier images for encryption purpose. To this end, a
carrier image is randomly chosen from a set of stored images. One
dimensional (1-D) discrete Fourier transform (DFT) is then carried
out on the original image to be encrypted along with the carrier
image. Row wise spectral addition and scaling is performed between
the magnitude spectra of the original and carrier images by randomly
selecting the rows. Similarly, row wise phase addition and scaling is
performed between the original and carrier images phase spectra by
randomly selecting the rows. The encrypted image obtained by these
two operations is further subjected to one more level of magnitude
and phase manipulation using another randomly chosen carrier image
by 1-D DFT along the columns. The resulting encrypted image is
found to be fully distorted, resulting in increasing the robustness
of the proposed work. Further, applying the reverse process at the
receiver, the decrypted image is found to be distortionless.
Abstract: Supply network management adopts a systematic
and integrative approach to managing the operations and
relationships of various parties in a supply network. The objective
of the manufactures in their supply network is to reduce inventory
costs and increase customer satisfaction levels. One way of doing
that is to synchronize delivery performance. A supply network can
be described by nodes representing the companies and the links
(relationships) between these nodes. Uncertainty in delivery time
depends on type of network relationship between suppliers. The
problem is to understand how the individual uncertainties influence
the total uncertainty of the network and identify those parts of the
network, which has the highest potential for improving the total
delivery time uncertainty.
Abstract: Periodicities in the environmetric time series can be
idyllically assessed by utilizing periodic models. In this
communication fugitive emission of gases from open sewer channel
Lyari which follows periodic behaviour are approximated by
employing periodic autoregressive model of order p. The orders of
periodic model for each season are selected through the examination
of periodic partial autocorrelation or information criteria. The
parameters for the selected order of season are estimated individually
for each emitted air toxin. Subsequently, adequacies of fitted models
are established by examining the properties of the residual for each
season. These models are beneficial for schemer and administrative
bodies for the improvement of implemented policies to surmount
future environmental problems.
Abstract: Bio-electrical responses obtained from freshwater
sediments by employing microbial fuel cell (MFC) technology were
investigated in this experimental study. During the electricity
generation, organic matter in the sediment was microbially oxidized
under anaerobic conditions with an electrode serving as a terminal
electron acceptor. It was found that the sediment organic matter
(SOM) associated with electrochemically-active electrodes became
more humified, aromatic, and polydispersed, and had a higher average
molecular weight, together with the decrease in the quantity of SOM.
The alteration of characteristics of the SOM was analogous to that
commonly observed in the early stage of SOM diagenetic process (i.e.,
humification). These findings including an elevation of the sediment
redox potential present a possibility of the MFC technology as a new
soil/sediment remediation technique based on its potential benefits:
non-destructive electricity generation and bioremediation.
Abstract: The studying of enzymatic esterification of carboxylic
acids and higher alcohols was performed by esterase Saccharomyces
cerevisiae in water-organic medium. Investigation of the enzyme
specificity to acetic substrates showed the best result with acetic acid
in esterification reactions with ethanol whereas within other
carboxylic acids the esterification decreased with acids: hexanoic >
pentanoic > butyric > decanoic. In relation to higher alcohols C3-C5,
esterification increased with alcohols propanol < butanol < amylol.
Also it was determined that esterase was more specific to alcohols
with branched chain such as isobutyl alcohol and isoamyl alcohol.
Data obtained may have important practical implications, for
example, for application of yeast esterase in producing various
volatile esters as well as in enzymatic transformation of volatile acids
and toxic fusel alcohols into volatile esters by providing the
production of the high quality alcoholic beverages with redused
content of higher alcohols as well as with improved degustational and
hygienic properties.
Abstract: The very nonlinear nature of the generator and system
behaviour following a severe disturbance precludes the use of
classical linear control technique. In this paper, a new approach of
nonlinear control is proposed for transient and steady state stability
analysis of a synchronous generator. The control law of the generator
excitation is derived from the basis of Lyapunov stability criterion.
The overall stability of the system is shown using Lyapunov
technique. The application of the proposed controller to simulated
generator excitation control under a large sudden fault and wide
range of operating conditions demonstrates that the new control
strategy is superior to conventional automatic voltage regulator
(AVR), and show very promising results.
Abstract: Business Process Management (BPM) helps in optimizing the business processes inside an enterprise. But BPM architecture does not provide any help for extending the enterprise. Modern business environments and rapidly changing technologies are asking for brisk changes in the business processes. Service Oriented Architecture (SOA) can help in enabling the success of enterprise-wide BPM. SOA supports agility in software development that is directly related to achieve loose coupling of interacting software agents. Agility is a premium concern of the current software designing architectures. Together, BPM and SOA provide a perfect combination for enterprise computing. SOA provides the capabilities for services to be combined together and to support and create an agile, flexible enterprise. But there are still many questions to answer; BPM is better or SOA? and what is the future track of BPM and SOA? This paper tries to answer some of these important questions.
Abstract: The Constraints imposed by non-thermal
leptogenesis on the survival of the neutrino mass models describing
the presently available neutrino mass patterns, are studied
numerically. We consider the Majorana CP violating phases coming
from right-handed Majorana mass matrices to estimate the baryon
asymmetry of the universe, for different neutrino mass models
namely quasi-degenerate, inverted hierarchical and normal
hierarchical models, with tribimaximal mixings. Considering two
possible diagonal forms of Dirac neutrino mass matrix as either
charged lepton or up-quark mass matrix, the heavy right-handed
mass matrices are constructed from the light neutrino mass matrix.
Only the normal hierarchical model leads to the best predictions of
baryon asymmetry of the universe, consistent with observations in
non-thermal leptogenesis scenario.
Abstract: This paper presents a novel three-phase utility
frequency to high frequency soft switching power conversion circuit
with dual mode pulse width modulation and pulse density modulation
for high power induction heating applications as melting of steel and
non ferrous metals, annealing of metals, surface hardening of steel
and cast iron work pieces and hot water producers, steamers and
super heated steamers. This high frequency power conversion circuit
can operate from three-phase systems to produce high current for
high power induction heating applications under the principles of
ZVS and it can regulate its ac output power from the rated value to a
low power level. A dual mode modulation control scheme based on
high frequency PWM in synchronization with the utility frequency
positive and negative half cycles for the proposed high frequency
conversion circuit and utility frequency pulse density modulation is
produced to extend its soft switching operating range for wide ac
output power regulation. A dual packs heat exchanger assembly is
designed to be used in consumer and industrial fluid pipeline systems
and it is proved to be suitable for the hot water, steam and super
heated steam producers. Experiment and simulation results are given
in this paper to verify the operation principles of the proposed ac
conversion circuit and to evaluate its power regulation and
conversion efficiency. Also, the paper presents a mutual coupling
model of the induction heating load instead of equivalent transformer
circuit model.
Abstract: In the current decade, wireless sensor networks are
emerging as a peculiar multi-disciplinary research area. By this
way, energy efficiency is one of the fundamental research themes
in the design of Medium Access Control (MAC) protocols for
wireless sensor networks. Thus, in order to optimize the energy
consumption in these networks, a variety of MAC protocols are
available in the literature. These schemes were commonly evaluated
under simple network density and a few results are published on
their robustness in realistic network-s size. We, in this paper, provide
an analytical study aiming to highlight the energy waste sources in
wireless sensor networks. Then, we experiment three energy efficient
hybrid CSMA/CA based MAC protocols optimized for wireless
sensor networks: Sensor-MAC (SMAC), Time-out MAC (TMAC)
and Traffic aware Energy Efficient MAC (TEEM). We investigate
these protocols with different network densities in order to discuss
the end-to-end performances of these schemes (i.e. in terms of energy
efficiency, delay and throughput). Through Network Simulator (NS-
2) implementations, we explore the behaviors of these protocols with
respect to the network density. In fact, this study may help the multihops
sensor networks designers to design or select the MAC layer
which matches better their applications aims.
Abstract: Palm methyl ester (PME) is one of the alternative
biomass fuels to liquid fossil fuels. To investigate the combustion
characteristics of PME as an alternative fuel for gas turbines, combustion experiments using two types of burners under atmospheric
pressure were performed. One of the burners has a configuration
making strong non-premixed flame, whereas the other has a
configuration promoting prevaporization of fuel droplets. The results
show that the NOx emissions can be reduced by employing the latter burner without accumulation of soot when PME is used as a fuel. A
burner configuration promoting prevaporzation of fuel droplets is
recommended for PME.
Abstract: The most common forensic activity is searching a hard
disk for string of data. Nowadays, investigators and analysts are
increasingly experiencing large, even terabyte sized data sets when
conducting digital investigations. Therefore consecutive searching can
take weeks to complete successfully. There are two primary search
methods: index-based search and bitwise search. Index-based
searching is very fast after the initial indexing but initial indexing
takes a long time. In this paper, we discuss a high speed bitwise search
model for large-scale digital forensic investigations. We used pattern
matching board, which is generally used for network security, to
search for string and complex regular expressions. Our results indicate
that in many cases, the use of pattern matching board can substantially
increase the performance of digital forensic search tools.
Abstract: The back-propagation algorithm calculates the weight
changes of an artificial neural network, and a two-term algorithm
with a dynamically optimal learning rate and a momentum factor
is commonly used. Recently the addition of an extra term, called a
proportional factor (PF), to the two-term BP algorithm was proposed.
The third term increases the speed of the BP algorithm. However,
the PF term also reduces the convergence of the BP algorithm, and
optimization approaches for evaluating the learning parameters are
required to facilitate the application of the three terms BP algorithm.
This paper considers the optimization of the new back-propagation
algorithm by using derivative information. A family of approaches
exploiting the derivatives with respect to the learning rate, momentum
factor and proportional factor is presented. These autonomously
compute the derivatives in the weight space, by using information
gathered from the forward and backward procedures. The three-term
BP algorithm and the optimization approaches are evaluated using
the benchmark XOR problem.
Abstract: Acute toxicity of nano SiO2, ZnO, MCM-41 (Meso
pore silica), Cu, Multi Wall Carbon Nano Tube (MWCNT), Single
Wall Carbon Nano Tube (SWCNT) , Fe (Coated) to bacteria Vibrio
fischeri using a homemade luminometer , was evaluated. The values
of the nominal effective concentrations (EC), causing 20% and 50%
inhibition of biouminescence, using two mathematical models at two
times of 5 and 30 minutes were calculated. Luminometer was
designed with Photomultiplier (PMT) detector. Luminol
chemiluminescence reaction was carried out for the calibration graph.
In the linear calibration range, the correlation coefficients and
coefficient of Variation (CV) were 0.988 and 3.21% respectively
which demonstrate the accuracy and reproducibility of the instrument
that are suitable. The important part of this research depends on how
to optimize the best condition for maximum bioluminescence. The
culture of Vibrio fischeri with optimal conditions in liquid media,
were stirring at 120 rpm at a temperature of 150C to 180C and were
incubated for 24 to 72 hours while solid medium was held at 180C
and for 48 hours. Suspension of nanoparticles ZnO, after 30 min
contact time to bacteria Vibrio fischeri, showed the highest toxicity
while SiO2 nanoparticles showed the lowest toxicity. After 5 min
exposure time, the toxicity of ZnO was the strongest and MCM-41
was the weakest toxicant component.
Abstract: The decision of information technology (IT) outsourcing requires close attention to the evaluation of supplier selection process because the selection decision involves conflicting multiple criteria and is replete with complex decision making problems. Selecting the most appropriate suppliers is considered an important strategic decision that may impact the performance of outsourcing engagements. The objective of this paper is to aid decision makers to evaluate and assess possible IT outsourcing suppliers. An axiomatic design based fuzzy group decision making is adopted to evaluate supplier alternatives. Finally, a case study is given to demonstrate the potential of the methodology. KeywordsIT outsourcing, Supplier selection, Multi-criteria decision making, Axiomatic design, Fuzzy logic.
Abstract: Homogeneous composites of alumina and zirconia
with a small amount of MgO (99%) were obtained for ZTA ceramic containing 0.05 wt% MgO in
1500 °C.
Abstract: Use of microemulsion in enhanced oil recovery has become more attractive in recent years because of its high level of extraction efficiency. Experimental investigations have been made on characterization of microemulsions of oil-brinesurfactant/ cosurfactant system for its use in enhanced oil recovery (EOR). Sodium dodecyl sulfate, propan-1-ol and heptane were selected as surfactant, cosurfactant and oil respectively for preparation of microemulsion. The effects of salinity on the relative phase volumes and solubilization parameters have also been studied. As salinity changes from low to high value, phase transition takes place from Winsor I to Winsor II via Winsor III. Suitable microemulsion composition has been selected based on its stability and ability to reduce interfacial tension. A series of flooding experiments have been performed using the selected microemulsion. The flooding experiments were performed in a core flooding apparatus using uniform sand pack. The core holder was tightly packed with uniform sands (60-100 mesh) and saturated with brines of different salinities. It was flooded with the brine at 25 psig and the absolute permeability was calculated from the flow rate of the through sand pack. The sand pack was then flooded with the crude oil at 800 psig to irreducible water saturation. The initial water saturation was determined on the basis of mass balance. Waterflooding was conducted by placing the coreholder horizontally at a constant injection pressure at 200 pisg. After water flooding, when water-cut reached above 95%, around 0.5 pore volume (PV) of the above microemulsion slug was injected followed by chasing water. The experiments were repeated using different composition of microemulsion slug. The additional recoveries were calculated by material balance. Encouraging results with additional recovery more than 20% of original oil in place above the conventional water flooding have been observed.