Abstract: A novel idea presented in this paper is to combine
multihop routing with single-frequency networks (SFNs) for a
broadcasting scenario. An SFN is a set of multiple nodes that transmit
the same data simultaneously, resulting in transmitter macrodiversity.
Two of the most important performance factors of multihop
networks, node reachability and routing robustness, are analyzed.
Simulation results show that our proposed SFN-D routing algorithm
improves the node reachability by 37 percentage points as compared
to non-SFN multihop routing. It shows a diversity gain of 3.7 dB,
meaning that 3.7 dB lower transmission powers are required for the
same reachability. Even better results are possible for larger
networks. If an important node becomes inactive, this algorithm can
find new routes that a non-SFN scheme would not be able to find.
Thus, two of the major problems in multihopping are addressed;
achieving robust routing as well as improving node reachability or
reducing transmission power.
Abstract: This paper compares six approaches of object serialization
from qualitative and quantitative aspects. Those are object
serialization in Java, IDL, XStream, Protocol Buffers, Apache Avro,
and MessagePack. Using each approach, a common example is
serialized to a file and the size of the file is measured. The qualitative
comparison works are investigated in the way of checking whether
schema definition is required or not, whether schema compiler is
required or not, whether serialization is based on ascii or binary, and
which programming languages are supported. It is clear that there
is no best solution. Each solution makes good in the context it was
developed.
Abstract: This paper introduces a novel design for boring bar with enhanced damping capability. The principle followed in the design phase was to enhance the damping capability minimizing the loss in static stiffness through implementation of composite material interfaces. The newly designed tool has been compared to a conventional tool. The evaluation criteria were the dynamic characteristics, frequency and damping ratio, of the machining system, as well as the surface roughness of the machined workpieces. The use of composite material in the design of damped tool has been demonstrated effective. Furthermore, the autoregressive moving average (ARMA) models presented in this paper take into consideration the interaction between the elastic structure of the machine tool and the cutting process and can therefore be used to characterize the machining system in operational conditions.
Abstract: The purpose of this study is to investiagte the use of
the ecommerce website in Indonesia as a developing country. The
ecommerce website has been identified having the significant impact
on business activities in particular solving the geographical problem
for islanded countries likes Indonesia. Again, website is identified as
a crucial marketing tool. This study presents the effect of quality and
features on the use and user satisfaction employing ecommerce
websites. Survey method for 115 undergraduate students of
Management Department in Andalas University who are attending
Management Information Systems (SIM) class have been
undertaken. The data obtained is analyzed using Structural Equation
Modeling (SEM) using SmartPLS program. This result found that
quality of system and information, feature as well satisfaction
influencing the use ecommerce website in Indonesia contexts.
Abstract: Avionic software architecture has transit from a
federated avionics architecture to an integrated modular avionics
(IMA) .ARINC 653 (Avionics Application Standard Software Interface) is a software specification for space and time partitioning in
Safety-critical avionics Real-time operating systems. Methods to transform the abstract avionics application logic function to the
executable model have been brought up, however with less
consideration about the code generating input and output model specific for ARINC 653 platform and inner-task synchronous dynamic
interaction order sequence. In this paper, we proposed an
AADL-based model-driven design methodology to fulfill the purpose
to automatically generating Cµ executable model on ARINC 653 platform from the ARINC653 architecture which defined as AADL653 in order to facilitate the development of the avionics software constructed on ARINC653 OS. This paper presents the
mapping rules between the AADL653 elements and the elements in
Cµ language, and define the code generating rules , designs an automatic C µ code generator .Then, we use a case to illustrate our
approach. Finally, we give the related work and future research directions.
Abstract: This study on “The relationship between human
resource practices and Firm Performance is a speculative
investigation research. The purpose of this research are (1) to provide
and to understand of HRM history and current HR practices in the
Philippines (2) to examine the extent of HRM practice among its
Philippine firms effectively; (3) to investigate the relationship
between HRM practice and firm performance in the Philippines. The
survey was done to 233 companies in the Philippines. The
questionnaire is divided into three parts a) to gathers information on
the profile of respondent, b) to measures the extent to which human
resource practices are being practiced in their organization c) to
measure the organizations performance as perceived by human
resource managers and top executives as compared with their
competitors in the same industry. As a result an interesting finding
was that almost 50 percent of firm performance is affected by the
extent of implementation of HR practices in the firm. These results
show that HR practices that are in line with the organization’s
strategic goals are important for future performance.
Abstract: Experiments were carried out at the Latvia State
Institute of Fruit-Growing in 2011. Fresh-cut minimally processed
apple and pear mixed salad were packed by passive modified
atmosphere (MAP) in PP containers, which were hermetically sealed
by breathable conventional BOPP PropafreshTM P2GAF, and Amcor
Agrifresh films. Biodegradable NatureFlexTM NVS INNOVIA Films
and VC999 BioPack PLA films coated with a barrier of pure silicon
oxide (SiOx) were used to compare the fresh-cut produce quality
with this packed in conventional packaging films. Samples were cold
stored at temperature +4.0±0.5 °C up to 10 days. The quality of salad
was evaluated by physicochemical properties – weight losses,
moisture, firmness, the effect of packaging modes on the colour,
dynamics in headspace atmosphere concentration (CO2 and O2),
titratable acidity values, as well as by microbiological contamination
(yeasts, moulds and total bacteria count) of salads, analyzing before
packaging and after 2, 4, 6, 8, and 10 storage days.
Abstract: Psoriasis is a chronic inflammatory skin condition
which affects 2-3% of population around the world. Psoriasis Area
and Severity Index (PASI) is a gold standard to assess psoriasis
severity as well as the treatment efficacy. Although a gold standard,
PASI is rarely used because it is tedious and complex. In practice,
PASI score is determined subjectively by dermatologists, therefore
inter and intra variations of assessment are possible to happen even
among expert dermatologists. This research develops an algorithm to
assess psoriasis lesion for PASI scoring objectively. Focus of this
research is thickness assessment as one of PASI four parameters
beside area, erythema and scaliness. Psoriasis lesion thickness is
measured by averaging the total elevation from lesion base to lesion
surface. Thickness values of 122 3D images taken from 39 patients
are grouped into 4 PASI thickness score using K-means clustering.
Validation on lesion base construction is performed using twelve
body curvature models and show good result with coefficient of
determinant (R2) is equal to 1.
Abstract: In this paper the supersonic ejectors are
experimentally and analytically studied. Ejector is a device that
uses the energy of a fluid to move another fluid. This device works
like a vacuum pump without usage of piston, rotor or any other
moving component. An ejector contains an active nozzle, a passive
nozzle, a mixing chamber and a diffuser. Since the fluid viscosity
is large, and the flow is turbulent and three dimensional in the
mixing chamber, the numerical methods consume long time and
high cost to analyze the flow in ejectors. Therefore this paper
presents a simple analytical method that is based on the precise
governing equations in fluid mechanics. According to achieved
analytical relations, a computer code has been prepared to analyze
the flow in different components of the ejector. An experiment has
been performed in supersonic regime 1.5
Abstract: Many research works are carried out on the analysis of
traces in a digital learning environment. These studies produce large
volumes of usage tracks from the various actions performed by a
user. However, to exploit these data, compare and improve
performance, several issues are raised. To remedy this, several works
deal with this problem seen recently. This research studied a series of
questions about format and description of the data to be shared. Our
goal is to share thoughts on these issues by presenting our experience
in the analysis of trace-based log files, comparing several approaches
used in automatic classification applied to e-learning platforms.
Finally, the obtained results are discussed.
Abstract: In this paper, application of artificial neural networks
in typical disease diagnosis has been investigated. The real procedure
of medical diagnosis which usually is employed by physicians was
analyzed and converted to a machine implementable format. Then
after selecting some symptoms of eight different diseases, a data set
contains the information of a few hundreds cases was configured and
applied to a MLP neural network. The results of the experiments and
also the advantages of using a fuzzy approach were discussed as
well. Outcomes suggest the role of effective symptoms selection and
the advantages of data fuzzificaton on a neural networks-based
automatic medical diagnosis system.
Abstract: The most common domestic birds live in Turkey are: crows (Corvus corone), pigeons (Columba livia), sparrows (Passer domesticus), starlings (Sturnus vulgaris) and blackbirds (Turdus merula). These birds give damage to the agricultural areas and make dirty the human life areas. In order to send away these birds, some different materials and methods such as chemicals, treatments, colored lights, flash and audible scarers are used. It is possible to see many studies about chemical methods in the literatures. However there is not enough works regarding audible bird scarers are reported in the literature. Therefore, a solar powered bird scarer was designed, manufactured and tested in this experimental investigation. Firstly, to understand the sensitive level of these domestic birds against to the audible scarer, many series preliminary studies were conducted. These studies showed that crows are the most resistant against to the audible bird scarer when compared with pigeons, sparrows, starlings and blackbirds. Therefore the solar powered audible bird scarer was tested on crows. The scarer was tested about one month during April- May, 2007. 18 different common known predators- sounds (voices or calls) of domestic birds from Falcon (Falco eleonorae), Falcon (Buteo lagopus), Eagle (Aquila chrysaetos), Montagu-s harrier (Circus pygargus) and Owl (Glaucidium passerinum) were selected for test of the scarer. It was seen from the results that the reaction of the birds was changed depending on the predators- sound type, camouflage of the scarer, sound quality and volume, loudspeaker play and pause periods in one application. In addition, it was also seen that the sound from Falcon (Buteo lagopus) was most effective on crows and the scarer was enough efficient.
Abstract: The focus in this work is to assess which method
allows a better forecasting of malaria cases in Bujumbura ( Burundi)
when taking into account association between climatic factors and
the disease. For the period 1996-2007, real monthly data on both
malaria epidemiology and climate in Bujumbura are described and
analyzed. We propose a hierarchical approach to achieve our
objective. We first fit a Generalized Additive Model to malaria cases
to obtain an accurate predictor, which is then used to predict future
observations. Various well-known forecasting methods are compared
leading to different results. Based on in-sample mean average
percentage error (MAPE), the multiplicative exponential smoothing
state space model with multiplicative error and seasonality performed
better.
Abstract: Author presents the results of a study conducted to identify criteria of efficient information system (IS) with serviceoriented architecture (SOA) realization and proposes a ranking method to evaluate SOA information systems using a set of architecture quality criteria before the systems are implemented. The method is used to compare 7 SOA projects and ranking result for SOA efficiency of the projects is provided. The choice of SOA realization project depends on following criteria categories: IS internal work and organization, SOA policies, guidelines and change management, processes and business services readiness, risk management and mitigation. The last criteria category was analyzed on the basis of projects statistics.
Abstract: In the paper an effective context based lossless coding
technique is presented. Three principal and few auxiliary contexts are
defined. The predictor adaptation technique is an improved CoBALP
algorithm, denoted CoBALP+. Cumulated predictor error combining
8 bias estimators is calculated. It is shown experimentally that
indeed, the new technique is time-effective while it outperforms the
well known methods having reasonable time complexity, and is
inferior only to extremely computationally complex ones.
Abstract: A new approach is adopted in this paper based
on Turk and Pentland-s eigenface method. It was found that the
probability density function of the distance between the projection
vector of the input face image and the average projection vector of
the subject in the face database, follows Rayleigh distribution. In
order to decrease the false acceptance rate and increase the
recognition rate, the input face image has been recognized using two
thresholds including the acceptance threshold and the rejection
threshold. We also find out that the value of two thresholds will be
close to each other as number of trials increases. During the training,
in order to reduce the number of trials, the projection vectors for each
subject has been averaged. The recognition experiments using the
proposed algorithm show that the recognition rate achieves to
92.875% whilst the average number of judgment is only 2.56 times.
Abstract: In this paper, we propose a Connect6 solver which
adopts a hybrid approach based on a tree-search algorithm and image
processing techniques. The solver must deal with the complicated
computation and provide high performance in order to make real-time
decisions. The proposed approach enables the solver to be
implemented on a single Spartan-6 XC6SLX45 FPGA produced by
XILINX without using any external devices. The compact
implementation is achieved through image processing techniques to
optimize a tree-search algorithm of the Connect6 game. The tree
search is widely used in computer games and the optimal search brings
the best move in every turn of a computer game. Thus, many
tree-search algorithms such as Minimax algorithm and artificial
intelligence approaches have been widely proposed in this field.
However, there is one fundamental problem in this area; the
computation time increases rapidly in response to the growth of the
game tree. It means the larger the game tree is, the bigger the circuit
size is because of their highly parallel computation characteristics.
Here, this paper aims to reduce the size of a Connect6 game tree using
image processing techniques and its position symmetric property. The
proposed solver is composed of four computational modules: a
two-dimensional checkmate strategy checker, a template matching
module, a skilful-line predictor, and a next-move selector. These
modules work well together in selecting next moves from some
candidates and the total amount of their circuits is small. The details of
the hardware design for an FPGA implementation are described and
the performance of this design is also shown in this paper.
Abstract: This paper argues that fostering mutual understanding in landscape planning is as much about the planners educating stakeholder groups as the stakeholders educating the planners. In other words it is an epistemological agreement as to the meaning and nature of place, especially where an effort is made to go beyond the quantitative aspects, which can be achieved by the phenomenological experience of the Virtual Reality (VR) environment. This education needs to be a bi-directional process in which distance can be both temporal as well as spatial separation of participants, that there needs to be a common framework of understanding in which neither 'side' is disadvantaged during the process of information exchange and it follows that a medium such as VR offers an effective way of overcoming some of the shortcomings of traditional media by taking advantage of continuing technological advances in Information, Technology and Communications (ITC). In this paper we make particular reference to this as an extension to Geographical Information Systems (GIS). VR as a two-way communication tool offers considerable potential particularly in the area of Public Participation GIS (PPGIS). Information rich virtual environments that can operate over broadband networks are now possible and thus allow for the representation of large amounts of qualitative and quantitative information 'side-by-side'. Therefore, with broadband access becoming standard for households and enterprises alike, distributed virtual reality environments have great potential to contribute to enabling stakeholder participation and mutual learning within the planning context.
Abstract: On one hand, SNMP (Simple Network Management
Protocol) allows integrating different enterprise elements connected
through Internet into a standardized remote management. On the
other hand, as a consequence of the success of Intelligent Houses
they can be connected through Internet now by means of a residential
gateway according to a common standard called OSGi (Open
Services Gateway initiative). Due to the specifics of OSGi Service
Platforms and their dynamic nature, specific design criterions should
be defined to implement SNMP Agents for OSGi in order to integrate
them into the SNMP remote management. Based on the analysis of
the relation between both standards (SNMP and OSGi), this paper
shows how OSGi Service Platforms can be included into the SNMP
management of a global enterprise, giving implementation details
about an SNMP Agent solution and the definition of a new MIB
(Management Information Base) for managing OSGi platforms that
takes into account the specifics and dynamic nature of OSGi.
Abstract: All-to-all personalized communication, also known as complete exchange, is one of the most dense communication patterns in parallel computing. In this paper, we propose new indirect algorithms for complete exchange on all-port ring and torus. The new algorithms fully utilize all communication links and transmit messages along shortest paths to completely achieve the theoretical lower bounds on message transmission, which have not be achieved among other existing indirect algorithms. For 2D r × c ( r % c ) all-port torus, the algorithm has time complexities of optimal transmission cost and O(c) message startup cost. In addition, the proposed algorithms accommodate non-power-of-two tori where the number of nodes in each dimension needs not be power-of-two or square. Finally, the algorithms are conceptually simple and symmetrical for every message and every node so that they can be easily implemented and achieve the optimum in practice.