Abstract: The problem of robust fuzzy control for a class of
nonlinear fuzzy impulsive singular perturbed systems with
time-varying delay is investigated by employing Lyapunov functions.
The nonlinear delay system is built based on the well-known T–S
fuzzy model. The so-called parallel distributed compensation idea is
employed to design the state feedback controller. Sufficient conditions
for global exponential stability of the closed-loop system are derived
in terms of linear matrix inequalities (LMIs), which can be easily
solved by LMI technique. Some simulations illustrate the effectiveness
of the proposed method.
Abstract: Both the minimum energy consumption and
smoothness, which is quantified as a function of jerk, are generally
needed in many dynamic systems such as the automobile and the
pick-and-place robot manipulator that handles fragile equipments.
Nevertheless, many researchers come up with either solely
concerning on the minimum energy consumption or minimum jerk
trajectory. This research paper considers the indirect minimum Jerk
method for higher order differential equation in dynamics
optimization proposes a simple yet very interesting indirect jerks
approaches in designing the time-dependent system yielding an
alternative optimal solution. Extremal solutions for the cost functions
of indirect jerks are found using the dynamic optimization methods
together with the numerical approximation. This case considers the
linear equation of a simple system, for instance, mass, spring and
damping. The simple system uses two mass connected together by
springs. The boundary initial is defined the fix end time and end
point. The higher differential order is solved by Galerkin-s methods
weight residual. As the result, the 6th higher differential order shows
the faster solving time.
Abstract: This paper presents a method for the detection of OD in the retina which takes advantage of the powerful preprocessing techniques such as the contrast enhancement, Gabor wavelet transform for vessel segmentation, mathematical morphology and Earth Mover-s distance (EMD) as the matching process. The OD detection algorithm is based on matching the expected directional pattern of the retinal blood vessels. Vessel segmentation method produces segmentations by classifying each image pixel as vessel or nonvessel, based on the pixel-s feature vector. Feature vectors are composed of the pixel-s intensity and 2D Gabor wavelet transform responses taken at multiple scales. A simple matched filter is proposed to roughly match the direction of the vessels at the OD vicinity using the EMD. The minimum distance provides an estimate of the OD center coordinates. The method-s performance is evaluated on publicly available DRIVE and STARE databases. On the DRIVE database the OD center was detected correctly in all of the 40 images (100%) and on the STARE database the OD was detected correctly in 76 out of the 81 images, even in rather difficult pathological situations.
Abstract: Segmenting the lungs in medical images is a
challenging and important task for many applications. In particular,
automatic segmentation of lung cavities from multiple magnetic
resonance (MR) images is very useful for oncological applications
such as radiotherapy treatment planning. However, distinguishing of
the lung areas is not trivial due to largely changing lung shapes, low
contrast and poorly defined boundaries. In this paper, we address
lung segmentation problem from pulmonary magnetic resonance
images and propose an automated method based on a robust regionaided
geometric snake with a modified diffused region force into the
standard geometric model definition. The extra region force gives the
snake a global complementary view of the lung boundary
information within the image which along with the local gradient
flow, helps detect fuzzy boundaries. The proposed method has been
successful in segmenting the lungs in every slice of 30 magnetic
resonance images with 80 consecutive slices in each image. We
present results by comparing our automatic method to manually
segmented lung cavities provided by an expert radiologist and with
those of previous works, showing encouraging results and high
robustness of our approach.
Abstract: The building of a factory can be a strategic investment
owing to its long service life. An evaluation that only focuses, for
example, on payments for the building, the technical equipment of
the factory, and the personnel for the enterprise is – considering the
complexity of the system factory – not sufficient for this long-term
view. The success of an investment is secured, among other things,
by the attainment of nonmonetary goals, too, like transformability.
Such aspects are not considered in traditional investment calculations
like the net present value method. This paper closes this gap with the
enhanced economic evaluation (EWR) for factory planning. The
procedure and the first results of an application in a project are
presented.
Abstract: In this paper we present the deep study about the Bio-
Medical Images and tag it with some basic extracting features (e.g.
color, pixel value etc). The classification is done by using a nearest
neighbor classifier with various distance measures as well as the
automatic combination of classifier results. This process selects a
subset of relevant features from a group of features of the image. It
also helps to acquire better understanding about the image by
describing which the important features are. The accuracy can be
improved by increasing the number of features selected. Various
types of classifications were evolved for the medical images like
Support Vector Machine (SVM) which is used for classifying the
Bacterial types. Ant Colony Optimization method is used for optimal
results. It has high approximation capability and much faster
convergence, Texture feature extraction method based on Gabor
wavelets etc..
Abstract: Biological sequences from different species are called or-thologs if they evolved from a sequence of a common ancestor species and they have the same biological function. Approximations of Kolmogorov complexity or entropy of biological sequences are already well known to be useful in extracting similarity information between such sequences -in the interest, for example, of ortholog detection. As is well known, the exact Kolmogorov complexity is not algorithmically computable. In prac-tice one can approximate it by computable compression methods. How-ever, such compression methods do not provide a good approximation to Kolmogorov complexity for short sequences. Herein is suggested a new ap-proach to overcome the problem that compression approximations may notwork well on short sequences. This approach is inspired by new, conditional computations of Kolmogorov entropy. A main contribution of the empir-ical work described shows the new set of entropy-based machine learning attributes provides good separation between positive (ortholog) and nega-tive (non-ortholog) data - better than with good, previously known alter-natives (which do not employ some means to handle short sequences well).Also empirically compared are the new entropy based attribute set and a number of other, more standard similarity attributes sets commonly used in genomic analysis. The various similarity attributes are evaluated by cross validation, through boosted decision tree induction C5.0, and by Receiver Operating Characteristic (ROC) analysis. The results point to the conclu-sion: the new, entropy based attribute set by itself is not the one giving the best prediction; however, it is the best attribute set for use in improving the other, standard attribute sets when conjoined with them.
Abstract: In this paper, a mathematical model for data object replication in ad hoc networks is formulated. The derived model is general, flexible and adaptable to cater for various applications in ad hoc networks. We propose a game theoretical technique in which players (mobile hosts) continuously compete in a non-cooperative environment to improve data accessibility by replicating data objects. The technique incorporates the access frequency from mobile hosts to each data object, the status of the network connectivity, and communication costs. The proposed technique is extensively evaluated against four well-known ad hoc network replica allocation methods. The experimental results reveal that the proposed approach outperforms the four techniques in both the execution time and solution quality
Abstract: Selected Mapping (SLM) is a PAPR reduction technique, which converts the OFDM signal into several independent signals by multiplication with the phase sequence set and transmits one of the signals with lowest PAPR. But it requires the index of the selected signal i.e. side information (SI) to be transmitted with each OFDM symbol. The PAPR reduction capability of the SLM scheme depends on the selection of phase sequence set. In this paper, we have proposed a new phase sequence set generation scheme based on M-ary chaotic sequence and a mapping scheme to map quaternary data to concentric circle constellation (CCC) is used. It is shown that this method does not require SI and provides better SER performance with good PAPR reduction capability as compared to existing SLMOFDM methods.
Abstract: A novel physico-chemical route to produce few layer graphene nanoribbons with atomically smooth edges is reported, via acid treatment (H2SO4:HNO3) followed by characteristic thermal shock processes involving extremely cold substances. Samples were studied by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), Raman spectroscopy and X-ray photoelectron spectroscopy. This method demonstrates the importance of having the nanotubes open ended for an efficient uniform unzipping along the nanotube axis. The average dimensions of these nanoribbons are approximately ca. 210 nm wide and consist of few layers, as observed by transmission electron microscopy. The produced nanoribbons exhibit different chiralities, as observed by high resolution transmission electron microscopy. This method is able to provide graphene nanoribbons with atomically smooth edges which could be used in various applications including sensors, gas adsorption materials, composite fillers, among others.
Abstract: Alzheimer is known as the loss of mental functions
such as thinking, memory, and reasoning that is severe enough to
interfere with a person's daily functioning. The appearance of
Alzheimer Disease symptoms (AD) are resulted based on which part
of the brain has a variety of infection or damage. In this case, the
MRI is the best biomedical instrumentation can be ever used to
discover the AD existence. Therefore, this paper proposed a fusion
method to distinguish between the normal and (AD) MRIs. In this
combined method around 27 MRIs collected from Jordanian
Hospitals are analyzed based on the use of Low pass -morphological
filters to get the extracted statistical outputs through intensity
histogram to be employed by the descriptive box plot. Also, the
artificial neural network (ANN) is applied to test the performance of
this approach. Finally, the obtained result of t-test with confidence
accuracy (95%) has compared with classification accuracy of ANN
(100 %). The robust of the developed method can be considered
effectively to diagnose and determine the type of AD image.
Abstract: Biologically human brain processes information in both unimodal and multimodal approaches. In fact, information is progressively abstracted and seamlessly fused. Subsequently, the fusion of multimodal inputs allows a holistic understanding of a problem. The proliferation of technology has exponentially produced various sources of data, which could be likened to being the state of multimodality in human brain. Therefore, this is an inspiration to develop a methodology for exploring multimodal data and further identifying multi-view patterns. Specifically, we propose a brain inspired conceptual model that allows exploration and identification of patterns at different levels of granularity, different types of hierarchies and different types of modalities. A structurally adaptive neural network is deployed to implement the proposed model. Furthermore, the acquisition of multi-view patterns with the proposed model is demonstrated and discussed with some experimental results.
Abstract: Magneto-rheological (MR) fluid damper is a semiactive
control device that has recently received more attention by the
vibration control community. But inherent hysteretic and highly
nonlinear dynamics of MR fluid damper is one of the challenging
aspects to employ its unique characteristics. The combination of
artificial neural network (ANN) and fuzzy logic system (FLS) have
been used to imitate more precisely the behavior of this device.
However, the derivative-based nature of adaptive networks causes
some deficiencies. Therefore, in this paper, a novel approach that
employ genetic algorithm, as a free-derivative algorithm, to enhance
the capability of fuzzy systems, is proposed. The proposed method
used to model MR damper. The results will be compared with
adaptive neuro-fuzzy inference system (ANFIS) model, which is one
of the well-known approaches in soft computing framework, and two
best parametric models of MR damper. Data are generated based on
benchmark program by applying a number of famous earthquake
records.
Abstract: Clusters of microcalcifications in mammograms are an
important sign of breast cancer. This paper presents a complete
Computer Aided Detection (CAD) scheme for automatic detection of
clustered microcalcifications in digital mammograms. The proposed
system, MammoScan μCaD, consists of three main steps. Firstly
all potential microcalcifications are detected using a a method for
feature extraction, VarMet, and adaptive thresholding. This will also
give a number of false detections. The goal of the second step,
Classifier level 1, is to remove everything but microcalcifications.
The last step, Classifier level 2, uses learned dictionaries and sparse
representations as a texture classification technique to distinguish
single, benign microcalcifications from clustered microcalcifications,
in addition to remove some remaining false detections. The system
is trained and tested on true digital data from Stavanger University
Hospital, and the results are evaluated by radiologists. The overall
results are promising, with a sensitivity > 90 % and a low false
detection rate (approx 1 unwanted pr. image, or 0.3 false pr. image).
Abstract: Power Factor (PF) is one of the most important parameters in the electrical systems, especially in the water pumping station. The low power factor value of the water pumping stations causes penalty for the electrical bill. There are many methods use for power factor improvement. Each one of them uses a capacitor on the electrical power network. The position of the capacitors is varied depends on many factors such as; voltage level and capacitors rating. Adding capacitors on the motor terminals increase the supply power factor from 0.8 to more than 0.9 but these capacitors cause some problems for the electrical grid network, such as increasing the harmonic contents of the grid line voltage. In this paper the effects of using capacitors in the water pumping stations to improve the power factor value on the harmonic contents of the electrical grid network are studied. One of large water pumping stations in Kafr El-Shikh Governorate in Egypt was used, as a case study. The effect of capacitors on the line voltage harmonic contents is measured. The station uses capacitors to improve the PF values at the 1 lkv grid network. The power supply harmonics values are measured by a power quality analyzer at different loading conditions. The results showed that; the capacitors improved the power factor value of the feeder and its value increased than 0.9. But the THD values are increased by adding these capacitors. The harmonic analysis showed that; the 13th, 17th, and 19th harmonics orders are increased also by adding the capacitors.
Abstract: The RK5GL3 method is a numerical method for solving
initial value problems in ordinary differential equations, and is based
on a combination of a fifth-order Runge-Kutta method and 3-point
Gauss-Legendre quadrature. In this paper we describe the propagation
of local errors in this method, and show that the global order of
RK5GL3 is expected to be six, one better than the underlying Runge-
Kutta method.
Abstract: The dynamics of a predator-prey model with continuous
threshold policy harvesting functions on the prey is studied. Theoretical
and numerical methods are used to investigate boundedness
of solutions, existence of bionomic equilibria, and the stability properties
of coexistence equilibrium points and periodic orbits. Several
bifurcations as well as some heteroclinic orbits are computed.
Abstract: In this paper, we are going to determine the threshold levels of adaptive modulation in a burst by burst CDMA system by a suboptimum method so that the above method attempts to increase the average bit per symbol (BPS) rate of transceiver system by switching between the different modulation modes in variable channel condition. In this method, we choose the minimum values of average bit error rate (BER) and maximum values of average BPS on different values of average channel signal to noise ratio (SNR) and then calculate the relative threshold levels of them, so that when the instantaneous SNR increases, a higher order modulation be employed for increasing throughput and vise-versa when the instantaneous SNR decreases, a lower order modulation be employed for improvement of BER. In transmission step, by this adaptive modulation method, in according to comparison between obtained estimation of pilot symbols and a set of above suboptimum threshold levels, above system chooses one of states no transmission, BPSK, 4QAM and square 16QAM for modulation of data. The expected channel in this paper is a slow Rayleigh fading.
Abstract: In this paper a genetic algorithms approach for solving the linear and quadratic fuzzy equations Ãx̃=B̃ and Ãx̃2 + B̃x̃=C̃ , where Ã, B̃, C̃ and x̃ are fuzzy numbers is proposed by genetic algorithms. Our genetic based method initially starts with a set of random fuzzy solutions. Then in each generation of genetic algorithms, the solution candidates converge more to better fuzzy solution x̃b . In this proposed method the final reached x̃b is not only restricted to fuzzy triangular and it can be fuzzy number.
Abstract: An inverse geometry problem is solved to predict an
unknown irregular boundary profile. The aim is to minimize the
objective function, which is the difference between real and
computed temperatures, using three different versions of Conjugate
Gradient Method. The gradient of the objective function, considered
necessary in this method, obtained as a result of solving the adjoint
equation. The abilities of three versions of Conjugate Gradient
Method in predicting the boundary profile are compared using a
numerical algorithm based on the method. The predicted shapes show
that due to its convergence rate and accuracy of predicted values, the
Powell-Beale version of the method is more effective than the
Fletcher-Reeves and Polak –Ribiere versions.