Abstract: Unsteady natural convection and heat transfer in a square cavity partially filled with porous media using a thermal
non-equilibrium model is studied in this paper. The left vertical wall is
maintained at a constant hot temperature Th and the right vertical wall
is maintained at a constant cold temperature Tc, while the horizontal
walls are adiabatic. The governing equations are obtained by applying
the Darcy model and Boussinesq approximation. COMSOL’s finite
element method is used to solve the non-dimensional governing
equations together with specified boundary conditions. The governing
parameters of this study are the Rayleigh number (Ra = 10^5, and Ra = 10^6 ), Darcy namber (Da = 10^−2, and Da = 10^−3),
the modified thermal conductivity ratio (10^−1 ≤ γ ≤ 10^4), the inter-phase heat transfer coefficien (10^−1 ≤ H ≤ 10^3) and the
time dependent (0.001 ≤ τ ≤ 0.2). The results presented for
values of the governing parameters in terms of streamlines in both
fluid/porous-layer, isotherms of fluid in fluid/porous-layer, isotherms
of solid in porous layer, and average Nusselt number.
Abstract: The world wide web coupled with the ever-increasing
sophistication of online technologies and software applications puts
greater emphasis on the need of even more sophisticated and
consistent quality requirements modeling than traditional software
applications. Web sites and Web applications (WebApps) are
becoming more information driven and content-oriented raising the
concern about their information quality (InQ). The consistent and
consolidated modeling of InQ requirements for WebApps at different
stages of the life cycle still poses a challenge. This paper proposes an
approach to specify InQ requirements for WebApps by reusing and
extending the ISO 25012:2008(E) data quality model. We also
discuss learnability aspect of information quality for the WebApps.
The proposed ISO 25012 based InQ framework is a step towards a
standardized approach to evaluate WebApps InQ.
Abstract: One of the common problems encountered in software
engineering is addressing and responding to the changing nature of
requirements. While several approaches have been devised to address
this issue, ranging from instilling resistance to changing requirements
in order to mitigate impact to project schedules, to developing an
agile mindset towards requirements, the approach discussed in this
paper is one of conceptualizing the delta in requirement and
modeling it, in order to plan a response to it. To provide some
context here, change is first formally identified and categorized as
either formal change or informal change. While agile methodology
facilitates informal change, the approach discussed in this paper
seeks to develop the idea of facilitating formal change. To collect,
document meta-requirements that represent the phenomena of change
would be a pro-active measure towards building a realistic cognition
of the requirements entity that can further be harnessed in the
software engineering process.
Abstract: Location-aware computing is a type of pervasive
computing that utilizes user-s location as a dominant factor for
providing urban services and application-related usages. One of the
important urban services is navigation instruction for wayfinders in a
city especially when the user is a tourist. The services which are
presented to the tourists should provide adapted location aware
instructions. In order to achieve this goal, the main challenge is to
find spatial relevant objects and location-dependent information. The
aim of this paper is the development of a reusable location-aware
model to handle spatial relevancy parameters in urban location-aware
systems. In this way we utilized ontology as an approach which could
manage spatial relevancy by defining a generic model. Our
contribution is the introduction of an ontological model based on the
directed interval algebra principles. Indeed, it is assumed that the
basic elements of our ontology are the spatial intervals for the user
and his/her related contexts. The relationships between them would
model the spatial relevancy parameters. The implementation language
for the model is OWLs, a web ontology language. The achieved
results show that our proposed location-aware model and the
application adaptation strategies provide appropriate services for the
user.
Abstract: A new and cost effective robotic device was designed
for remote tele surgery using dual tone multi frequency technology
(DTMF). Tele system with Dual Tone Multiple Frequency has a large
capability in sending and receiving of data in hardware and software.
The robot consists of DC motors for arm movements and it is
controlled manually through a mobile phone through DTMF
Technology. The system enables the surgeon from base station to
send commands through mobile phone to the patient’s robotic system
which includes two robotic arms that translate the input into actual
instrument manipulation. A mobile phone attached to the
microcontroller 8051 which can activate robot through relays. The
Remote robot-assisted tele surgery eliminates geographic constraints
for getting surgical expertise where it is needed and allows an expert
surgeon to teach or proctor the performance of surgical technique by
real-time intervention.
Abstract: The thermal expansion behaviour of silicon carbide
(SCS-2) fibre reinforced 6061 aluminium matrix composite subjected
to the influenced thermal mechanical cycling (TMC) process were
investigated. The thermal stress has important effect on the
longitudinal thermal expansion coefficient of the composites. The
present paper used experimental data of the thermal expansion
behaviour of a SiC/Al composite for temperatures up to 370°C, in
which their data was used for carrying out modelling of theoretical
predictions.
Abstract: Land surface temperature (LST) is an important
parameter to study in urban climate. The understanding of the
influence of biophysical factors could improve the establishment of
modeling urban thermal landscape. It is well established that climate
hold a great influence on the urban landscape. However, it has been
recognize that climate has a low priority in urban planning process,
due to the complex nature of its influence. This study will focus on
the relatively cloud free Landsat Thematic Mapper image of the study
area, acquired on the 2nd March 2006. Correlation analyses were
conducted to identify the relationship of LST to the biophysical
factors; vegetation indices, impervious surface, and albedo to
investigate the variation of LST. We suggest that the results can be
considered by the stackholders during decision-making process to
create a cooler and comfortable environment in the urban landscape
for city dwellers.
Abstract: Through the course of this paper we define Locationbased
Intelligence (LBI) which is outgrowing from process of
amalgamation of geolocation and Business Intelligence.
Amalgamating geolocation with traditional Business Intelligence (BI)
results in a new dimension of BI named Location-based Intelligence.
LBI is defined as leveraging unified location information for business
intelligence. Collectively, enterprises can transform location data into
business intelligence applications that will benefit all aspects of the
enterprise. Expectations from this new dimension of business
intelligence are great and its future is obviously bright.
Abstract: The antimicrobial, antiplasmid and cytotoxic activities of marine algae Halimeda opuntia and Sarconema filiforme were investigated. Antimicrobial bioassay against some human pathogenic bacteria and yeast were conducted using disc diffusion method. Halimeda extract exhibited antibacterial activity against six species of microrganisms, with significant inhibition against Staphylococcus aureus. While Sarconema extract was better potent as antifungal against Candida albicans. Comparative antibacterial studies showed that Halimeda extract showed equivalent or better activity as compared with commercial antibiotic when tested against Staphylococcus aureus. Further tests conducted using dilution method showed both extracts as having bacteriostatic mode of action against the tested microorganisms. Methanol extract of two species showed significant cytotoxicity (LC50
Abstract: Fatigue life prediction and evaluation are the key
technologies to assure the safety and reliability of automotive rubber
components. The objective of this study is to develop the fatigue
analysis process for vulcanized rubber components, which is
applicable to predict fatigue life at initial product design step. Fatigue
life prediction methodology of vulcanized natural rubber was
proposed by incorporating the finite element analysis and fatigue
damage parameter of maximum strain appearing at the critical location
determined from fatigue test. In order to develop an appropriate
fatigue damage parameter of the rubber material, a series of
displacement controlled fatigue test was conducted using threedimensional
dumbbell specimen with different levels of mean
displacement. It was shown that the maximum strain was a proper
damage parameter, taking the mean displacement effects into account.
Nonlinear finite element analyses of three-dimensional dumbbell
specimens were performed based on a hyper-elastic material model
determined from the uni-axial tension, equi-biaxial tension and planar
test. Fatigue analysis procedure employed in this study could be used
approximately for the fatigue design.
Abstract: This paper determines most common model of in-pipe
robots to derive its degree of freedom in order to compare with the
necessary degree of freedom required for a system to move inside
pipelines freely in order to derive analytical reason for losing control
of in-pipe robots at branched pipe. DOF of most common mechanism
in in-pipe robots can be calculated by considering the robot as a
parallel manipulator. A new design based on previously researched
in-pipe robot PAROYS has been suggested, and its possibility to
overcome branched section has been simulated.
Abstract: The accelerated growth in aircraft industries desire
effectual schemes, programs, innovative designs of advanced systems
and facilities to accomplish the augmenting need for home-free air
transportation. In this paper, a contemporary conceptual design of a
cambered airfoil has been proposed in order to providing augmented
effective lift force relative to the airplane, and to eliminating
drawbacks and limitations of an airfoil in a commercial airplane by
using a kind of smart materials. This invention of an unsymmetrical
airfoil structure utilizes the amplified air momentum around the
airfoil and increased camber length to providing improved aircraft
performance and assist to enhancing the reliability of the aircraft
components. Moreover, this conjectured design helps to reducing
airplane weight and total drag.
Abstract: Two constructions of unit-memory binary convolutional
codes from linear block codes over the finite semi-local ring F2r +vF2r , where v2 = v, are presented. In both cases, if the linear block code is systematic, then the resulting convolutional encoder
is systematic, minimal, basic and non-catastrophic. The Hamming
free distance of the convolutional code is bounded below by the
minimum Hamming distance of the block code. New examples of
binary convolutional codes that meet the Heller upper bound for
systematic codes are given.
Abstract: Dredging activities inevitably cause sediment
dispersion. In certain locations, where there are important ecological
areas such as mangroves or coral reefs, carefully planning the
dredging can significantly reduce negative impacts. This article
utilizes the dredging at Phuket port, Thailand, as a case study to
demonstrate how computer simulations can be helpful to protect
existing coral reefs. A software package named MIKE21 was
applied. Necessary information required by the simulations was
gathered. After calibrating and verifying the model, various dredging
scenario were simulated to predict spoil movement. The simulation
results were used as guidance to setting up an environmental
measure. Finally, the recommendation to dredge during flood tide
with silt curtains installed was made.
Abstract: This paper deals with the application of Principal Component Analysis (PCA) and the Hotelling-s T2 Chart, using data collected from a drinking water treatment process. PCA is applied primarily for the dimensional reduction of the collected data. The Hotelling-s T2 control chart was used for the fault detection of the process. The data was taken from a United Utilities Multistage Water Treatment Works downloaded from an Integrated Program Management (IPM) dashboard system. The analysis of the results show that Multivariate Statistical Process Control (MSPC) techniques such as PCA, and control charts such as Hotelling-s T2, can be effectively applied for the early fault detection of continuous multivariable processes such as Drinking Water Treatment. The software package SIMCA-P was used to develop the MSPC models and Hotelling-s T2 Chart from the collected data.
Abstract: This study links up the theories of social psychology,
economics and sport management to assess the impact of sport
participation on subjective well-being (SWB) and use a simple statistic
method to estimate the relative monetary value that sport participation
derives SWB for Taiwan-s college students. By constructing proper
measurements on sport participation and SWB respectively, a
structural equation model (SEM) is developed to perform a
confirmatory factory analysis, and the causal relationship between
sport participation and SWB as well as the effect of the demographic
variables on these two concepts are also discussed.
Abstract: In this paper an analytical solution is presented for fully developed flow in a parallel plates channel under the action of Lorentz force, by use of Homotopy Perturbation Method (HPM). The analytical results are compared with exact solution and an excellent agreement has been observed between them for both Couette and Poiseuille flows. Moreover, the effects of key parameters have been studied on the dimensionless velocity profile.
Abstract: This paper is aimed at describing a delay-based endto-
end (e2e) congestion control algorithm, called Very FAST TCP
(VFAST), which is an enhanced version of FAST TCP. The main
idea behind this enhancement is to smoothly estimate the Round-Trip
Time (RTT) based on a nonlinear filter, which eliminates throughput
and queue oscillation when RTT fluctuates. In this context, an evaluation
of the suggested scheme through simulation is introduced, by
comparing our VFAST prototype with FAST in terms of throughput,
queue behavior, fairness, stability, RTT and adaptivity to changes in
network. The achieved simulation results indicate that the suggested
protocol offer better performance than FAST TCP in terms of RTT
estimation and throughput.
Abstract: Sensitive and predictive DILI (Drug Induced Liver
Injury) biomarkers are needed in drug R&D to improve early
detection of hepatotoxicity. The discovery of DILI biomarkers that
demonstrate the predictive power to identify individuals at risk to
DILI would represent a major advance in the development of
personalized healthcare approaches. In this healthy volunteer
acetaminophen study (4g/day for 7 days, with 3 monitored nontreatment
days before and 4 after), 450 serum samples from 32
subjects were analyzed using protein profiling by antibody
suspension bead arrays. Multiparallel protein profiles were generated
using a DILI target protein array with 300 antibodies, where the
antibodies were selected based on previous literature findings of
putative DILI biomarkers and a screening process using pre dose
samples from the same cohort. Of the 32 subjects, 16 were found to
develop an elevated ALT value (2Xbaseline, responders). Using the
plasma profiling approach together with multivariate statistical
analysis some novel findings linked to lipid metabolism were found
and more important, endogenous protein profiles in baseline samples
(prior to treatment) with predictive power for ALT elevations were
identified.
Abstract: The aim of this study was to compare the effects
of an altitude training camp on heart rate variability and
performance in elite triathletes. Ten athletes completed 20 days of live-high, train-low training at 1650m. Athletes
underwent pre and post 800-m swim time trials at sea-level, and two heart rate variability tests at 1650m on the first and
last day of the training camp. Based on their time trial results,
athletes were divided into responders and non-responders. Relative to the non-responders, the responders sympathetic-toparasympathetic
ratio decreased substantially after 20 days of altitude training (-0.68 ± 1.08 and -1.2 ± 0.96, mean ± 90%
confidence interval for supine and standing respectively). In
addition, sympathetic activity while standing was also
substantially lower post-altitude in the responders compared to the non-responders (-1869 ± 4764 ms2). Results indicate that
responders demonstrated a change to more vagal
predominance compared to non-responders.