Abstract: This paper focuses on the dynamic behavior of
reinforced concrete (RC) slabs. Therefore, the theoretical modal
analysis was performed using two different types of boundary
conditions. Modal analysis method is the most important dynamic
analyses. The analysis would be modal case when there is no external
force on the structure. By using this method in this paper, the effects
of freely and simply supported boundary conditions on the
frequencies and mode shapes of RC square slabs are studied. ANSYS
software was employed to derive the finite element model to
determine the natural frequencies and mode shapes of the slabs.
Then, the obtained results through numerical analysis (finite element
analysis) would be compared with the exact solution. The main goal
of the research study is to predict how the boundary conditions
change the behavior of the slab structures prior to performing
experimental modal analysis. Based on the results, it is concluded
that simply support boundary condition has obvious influence to
increase the natural frequencies and change the shape of the mode
when it is compared with freely supported boundary condition of
slabs. This means that such support conditions have the direct
influence on the dynamic behavior of the slabs. Thus, it is suggested
to use free-free boundary condition in experimental modal analysis to
precisely reflect the properties of the structure. By using free-free
boundary conditions, the influence of poorly defined supports is
interrupted.
Abstract: This paper presents the hardware implemented and
validation for a special system to assist the unprofessional users of
car with back trailers. The system consists of two platforms; the front
car platform (C) and the trailer platform (T). The main objective is to
control the Trailer platform using the actuators found in the front
platform (c). The mobility of the platform (C) is investigated and
inverse and forward kinematics model is obtained for both platforms
(C) and (T).The system is simulated using Matlab M-file and the
simulation examples results illustrated the system performance. The
system is constructed with a hardware setup for the front and trailer
platform. The hardware experimental results and the simulated
examples outputs showed the validation of the hardware setup.
Abstract: An active slat is developed to increase the lift and delay
the separation for a DU96-W180 airfoil. The active slat is a fixed slat
that can be closed, fully opened or intermittently opened by a rotating
vane depending on the need. Experimental results show that the active
slat has reduced the mean pressure and increased the mean velocity
on the suction side of the airfoil for all positive angles of attack,
indicating an increase of lift. The experimental data and numerical
simulations also show that the direction of actuator vane rotation can
influence the mixing of the flow streams on the suction side and
hence influence the aerodynamic performance.
Abstract: The research conducted in early seventies apparently
assumed the existence of a universal decision model for union
negotiators and furthermore tended to regard financial information as
a ‘neutral’ input into a rational decision making process. However,
research in the eighties began to question the neutrality of financial
information as an input in collective bargaining rather viewing it as a
potentially effective means for controlling the labour force.
Furthermore, this later research also started challenging the simplistic
assumptions relating particularly to union objectives which have
underpinned the earlier search for universal union decision models.
Despite the above developments there seems to be a dearth of studies
in developing countries concerning the use of financial information in
collective bargaining. This paper seeks to begin to remedy this
deficiency. Utilising a case study approach based on two enterprises,
one in the public sector and the other a multinational, the universal
decision model is rejected and it is argued that the decision whether
or not to use financial information is a contingent one and such a
contingency is largely defined by the context and environment in
which both union and management negotiators work. An attempt is
also made to identify the factors constraining as well as promoting
the use of financial information in collective bargaining, these being
regarded as unique to the organisations within which the case studies
are conducted.
Abstract: To practically apply vacuum insulation panels (VIPs)
to buildings or home appliances, VIPs have demanded long-term
lifespan with outstanding insulation performance. Service lives of
VIPs enveloped with Al-foil and three-layer Al-metallized envelope
are calculated. For Al-foil envelope, the service life is longer but edge
conduction is too large compared with the Al-metallized envelope. To
increase service life even more, the proposed double enveloping
method and metal-barrier-added enveloping method are further
analyzed. The service lives of the VIP to employ two enveloping
methods are calculated. Also, pressure increase and thermal insulation
performance characteristics are investigated. For the metalbarrier-
added enveloping method, effective thermal conductivity
increase with time is close to that of Al-foil envelope, especially, for
getter-inserted VIPs. For double enveloping method, if water vapor is
perfectly adsorbed, the effect of service life enhancement becomes
much greater. From these methods, the VIP can be guaranteed for
service life of more than 20 years.
Abstract: Enterprise Architecture (EA) is a strategy that is
employed by enterprises in order to align their business and
Information Technology (IT). EA is managed, developed, and
maintained through Enterprise Architecture Implementation
Methodology (EAIM). Effectiveness of EA implementation is the
degree in which EA helps to achieve the collective goals of the
organization. This paper analyzes the results of a survey that aims to
explore the factors that affect the effectiveness of EAIM and
specifically the relationship between factors and effectiveness of the
output and functionality of EA project. The exploratory factor
analysis highlights a specific set of five factors: alignment,
adaptiveness, support, binding, and innovation. The regression
analysis shows that there is a statistically significant and positive
relationship between each of the five factors and the effectiveness of
EAIM. Consistent with theory and practice, the most prominent
factor for developing an effective EAIM is innovation. The findings
contribute to the measuring the effectiveness of EA implementation
project by providing an indication of the measurement
implementation approaches which is used by the Enterprise
Architects, and developing an effective EAIM.
Abstract: Images are important source of information used as
evidence during any investigation process. Their clarity and accuracy
is essential and of the utmost importance for any investigation.
Images are vulnerable to losing blocks and having noise added to
them either after alteration or when the image was taken initially,
therefore, having a high performance image processing system and it
is implementation is very important in a forensic point of view. This
paper focuses on improving the quality of the forensic images.
For different reasons packets that store data can be affected,
harmed or even lost because of noise. For example, sending the
image through a wireless channel can cause loss of bits. These types
of errors might give difficulties generally for the visual display
quality of the forensic images.
Two of the images problems: noise and losing blocks are covered.
However, information which gets transmitted through any way of
communication may suffer alteration from its original state or even
lose important data due to the channel noise. Therefore, a developed
system is introduced to improve the quality and clarity of the forensic
images.
Abstract: In the UK, flooding is responsible for significant
losses to the economy due to the impact on businesses, the vast
majority of which are Small and Medium Enterprises (SMEs).
Businesses of this nature tend to lack formal plans to aid their
response to and recovery from disruptive events such as flooding.
This paper reports on work on how an agent-based model (ABM) is
being developed based on interview data gathered from SMEs at-risk
of flooding and/or have direct experience of flooding. The ABM will
enable simulations to be performed allowing investigations of
different response strategies which SMEs may employ to lessen the
impact of flooding, thus strengthening their resilience.
Abstract: The dramatic rise in the use of Social Media (SM)
platforms such as Facebook and Twitter provide access to an
unprecedented amount of user data. Users may post reviews on
products and services they bought, write about their interests, share
ideas or give their opinions and views on political issues. There is a
growing interest in the analysis of SM data from organisations for
detecting new trends, obtaining user opinions on their products and
services or finding out about their online reputations. A recent
research trend in SM analysis is making predictions based on
sentiment analysis of SM. Often indicators of historic SM data are
represented as time series and correlated with a variety of real world
phenomena like the outcome of elections, the development of
financial indicators, box office revenue and disease outbreaks. This
paper examines the current state of research in the area of SM mining
and predictive analysis and gives an overview of the analysis
methods using opinion mining and machine learning techniques.
Abstract: As enterprise computing becomes more and more
complex, the costs and technical challenges of IT system maintenance
and support are increasing rapidly. One popular approach to managing
IT system maintenance is to prepare and use a FAQ (Frequently Asked
Questions) system to manage and reuse systems knowledge. Such a
FAQ system can help reduce the resolution time for each service
incident ticket. However, there is a major problem where over time the
knowledge in such FAQs tends to become outdated. Much of the
knowledge captured in the FAQ requires periodic updates in response
to new insights or new trends in the problems addressed in order to
maintain its usefulness for problem resolution. These updates require a
systematic approach to define the exact portion of the FAQ and its
content. Therefore, we are working on a novel method to
hierarchically structure the FAQ and automate the updates of its
structure and content. We use structured information and the
unstructured text information with the timelines of the information in
the service incident tickets. We cluster the tickets by structured
category information, by keywords, and by keyword modifiers for the
unstructured text information. We also calculate an urgency score
based on trends, resolution times, and priorities. We carefully studied
the tickets of one of our projects over a 2.5-year time period. After the
first 6 months we started to create FAQs and confirmed they improved
the resolution times. We continued observing over the next 2 years to
assess the ongoing effectiveness of our method for the automatic FAQ
updates. We improved the ratio of tickets covered by the FAQ from
32.3% to 68.9% during this time. Also, the average time reduction of
ticket resolution was between 31.6% and 43.9%. Subjective analysis
showed more than 75% reported that the FAQ system was useful in
reducing ticket resolution times.
Abstract: A key issue in seismic risk analysis within the context
of Performance-Based Earthquake Engineering is the evaluation of
the expected seismic damage of structures under a specific
earthquake ground motion. The assessment of the seismic
performance strongly depends on the choice of the seismic Intensity
Measure (IM), which quantifies the characteristics of a ground
motion that are important to the nonlinear structural response. Several
conventional IMs of ground motion have been used to estimate their
damage potential to structures. Yet, none of them has been proved to
be able to predict adequately the seismic damage. Therefore,
alternative, scalar intensity measures, which take into account not
only ground motion characteristics but also structural information
have been proposed. Some of these IMs are based on integration of
spectral values over a range of periods, in an attempt to account for
the information that the shape of the acceleration, velocity or
displacement spectrum provides. The adequacy of a number of these
IMs in predicting the structural damage of 3D R/C buildings is
investigated in the present paper. The investigated IMs, some of
which are structure specific and some are non structure-specific, are
defined via integration of spectral values. To achieve this purpose
three symmetric in plan R/C buildings are studied. The buildings are
subjected to 59 bidirectional earthquake ground motions. The two
horizontal accelerograms of each ground motion are applied along
the structural axes. The response is determined by nonlinear time
history analysis. The structural damage is expressed in terms of the
maximum interstory drift as well as the overall structural damage
index. The values of the aforementioned seismic damage measures
are correlated with seven scalar ground motion IMs. The comparative
assessment of the results revealed that the structure-specific IMs
present higher correlation with the seismic damage of the three
buildings. However, the adequacy of the IMs for estimation of the
structural damage depends on the response parameter adopted.
Furthermore, it was confirmed that the widely used spectral
acceleration at the fundamental period of the structure is a good
indicator of the expected earthquake damage level.
Abstract: Tumor is an uncontrolled growth of tissues in any part
of the body. Tumors are of different types and they have different
characteristics and treatments. Brain tumor is inherently serious and
life-threatening because of its character in the limited space of the
intracranial cavity (space formed inside the skull). Locating the tumor
within MR (magnetic resonance) image of brain is integral part of the
treatment of brain tumor. This segmentation task requires
classification of each voxel as either tumor or non-tumor, based on
the description of the voxel under consideration. Many studies are
going on in the medical field using Markov Random Fields (MRF) in
segmentation of MR images. Even though the segmentation process
is better, computing the probability and estimation of parameters is
difficult. In order to overcome the aforementioned issues, Conditional
Random Field (CRF) is used in this paper for segmentation, along
with the modified artificial bee colony optimization and modified
fuzzy possibility c-means (MFPCM) algorithm. This work is mainly
focused to reduce the computational complexities, which are found in
existing methods and aimed at getting higher accuracy. The
efficiency of this work is evaluated using the parameters such as
region non-uniformity, correlation and computation time. The
experimental results are compared with the existing methods such as
MRF with improved Genetic Algorithm (GA) and MRF-Artificial
Bee Colony (MRF-ABC) algorithm.
Abstract: In oases, the surface water resources are becoming
increasingly scarce and groundwater resources, which generally have
a poor quality due to the high levels of salinity, are often
overexploited. Water saving have therefore become imperative for
better oases sustainability. If drip irrigation is currently recommended
in Morocco for saving water and valuing, its use in the sub-desert
areas does not keep water safe from high evaporation rates. An
alternative to this system would be the use of subsurface drip
irrigation. This technique is defined as an application of water under
the soil surface through drippers, which deliver water at rates
generally similar to surface drip irrigation. As subsurface drip
irrigation is a recently introduced in Morocco, a better understanding
of the infiltration process around a buried source, in local conditions,
and its impact on plant growth is necessarily required. This study
aims to contribute to improving the water use efficiency by testing
the performance of subsurface irrigation system, especially in areas
where water is a limited source. The objectives of this research are
performance evaluation in arid conditions of the subsurface drip
irrigation system for young date palms compared to the surface drip.
In this context, an experimental test is installed at a farmer’s field in
the area of Erfoud (Errachidia Province, southeastern Morocco),
using the subsurface drip irrigation system in comparison with the
classic drip system for young date palms. Flow measurement to
calculate the uniformity of the application of water was done through
two methods: a flow measurement of drippers above the surface and
another one underground. The latter method has also helped us to
estimate losses through evaporation for both irrigation techniques. In
order to compare the effect of two irrigation modes, plants were
identified for each type of irrigation to monitor certain agronomic
parameters (cumulative numbers of palms and roots development).
Experimentation referred to a distribution uniformity of about 88%;
considered acceptable for subsurface drip irrigation while it is around
80% for the surface drip irrigation. The results also show an increase
in root development and in the number of palm, as well as a
substantial water savings due to lower evaporation losses compared
to the classic drip irrigation.
The results of this study showed that subsurface drip irrigation is
an efficient technique, which allows sustainable irrigation in arid
areas.
Abstract: Wireless sensor network (WSN) is a network of many interconnected networked systems, they equipped with energy resources and they are used to detect other physical characteristics. On WSN, there are many researches are performed in past decades. WSN applicable in many security systems govern by military and in many civilian related applications. Thus, the security of WSN gets attention of researchers and gives an opportunity for many future aspects. Still, there are many other issues are related to deployment and overall coverage, scalability, size, energy efficiency, quality of service (QoS), computational power and many more. In this paper we discus about various applications and security related issue and requirements of WSN.
Abstract: E-service quality plays a significant role to achieve
success or failure in any organization, offering services online. It will
increase the competition among the organizations, to attract the
customers on the basis of the quality of service provided by the
organization. Better e-service quality will enhance the relationship
with customers and their satisfaction. So the measurement of eservice
quality is very important but it is a complex process due to
the complex nature of services. Literature predicts that there is a lack
of universal definition of e-service quality. The e-service quality
measures in banking have great importance in achieving high
customer base. This paper proposes a conceptual model for
measuring e-service quality in Indian Banking Industry. Nine
dimensions reliability, ease of use, personalization, security and trust,
website aesthetic, responsiveness, contact and fulfillment had been
identified. The results of this paper may help to develop a proper
scale to measure the e-service quality in Indian Banking Industry,
which may assist to maintain and improve the performance and
effectiveness of e-service quality to retain customers.
Abstract: Particles are the most common and cheapest
reinforcement producing discontinuous reinforced composites with
isotropic properties. Conventional fabrication methods can be used to
produce a wide range of product forms, making them relatively
inexpensive. Optimising composite development must include
consideration of all the fundamental aspect of particles including
their size, shape, volume fraction, distribution and mechanical
properties. Research has shown that the challenges of low fracture
toughness, poor crack growth resistance and low thermal stability can
be overcome by reinforcement with particles. The unique properties
exhibited by micro particles reinforced ceramic composites have
made them to be highly attractive in a vast array of applications.
Abstract: According to the demand of the power and
refrigeration industry, the theoretical and practical teachings of the
Thermal Energy and Power Engineering characteristic specialty in
china are studied. The teaching reform and practice of the Thermal
Energy and Power Engineering specialty have been carried out,
including construction and reform measures, teaching reform and
practice, features, and achievements. Proved by practices, the
theoretical and practical teaching effects are obvious. The study results
can provides certain reference experience for theoretical and practical
teachings of the related specialties in china.
Abstract: Two Lithium Disilicate (LD) glass ceramics based on
SiO2-Li2O-K2O-Al2O3 system were prepared through a glass melting
method. The glass rods were then fabricated into dental crowns via a
hot pressing at 900˚C and 850˚C in order to study the effect of the
pressing temperatures on the phase formation and microstructure of
the glasses. Different samples of as cast glass and heat treated
samples (600˚C and 700˚C) were used to press for investigating the
effect of an initial microstructure on the hot pressing technique. Xray
diffraction (XRD) and scanning electron microscopy (SEM) were
performed to determine the phase formation and microstructure of the
samples, respectively. XRD results show that the main crystalline
structure was Li2Si2O5 by having Li3PO4, Li0.6Al0.6Si2O6, Li2SiO3,
Ca5 (PO4)3F and SiO2 as minor phases. Glass compositions with
different heat treatment temperatures exhibited a difference phase
formations but have less effect during pressing. SEM micrographs
showed the microstructure of Li2Si2O5 as lath-like shape in all
glasses. With increasing the initial heat treatment temperature, the
longer the lath-like crystals of lithium disilicate were increased
especially when using glass heat treatment at 700˚C followed by
pressing at 900˚C. This could be suggested that LD1 heat treatment at
700˚C which pressing at 900˚C presented the best formation by the
hot pressing and compiled microstructure.
Abstract: Precast residential houses are normally constructed in Malaysia using precast shear-key wall panel and this panel is designed using BS8110 where there is no provision for earthquake. However, the safety of this house under moderate and strong earthquake is still questionable. Consequently, the full-scale of residential house are designed, constructed, tested and analyzed under in-plane lateral quasi-static cyclic loading. Hysteresis loops are plotted based on the experimental work and compared with modeling of hysteresis loops using HYSTERES in RUAUMOKO 2D program. Modified Takeda hysteresis model is chosen to behave a similar pattern with experimental work. This program will display the earthquake excitations, spectral displacements, pseudo spectral acceleration, mode shape and deformation of the structure. It can be concluded that this building is suffering severe cracks and damage under moderate and severe earthquake.
Abstract: Augmented Reality is a technology that involves the
overlay of virtual content, which is context or environment sensitive,
on images of the physical world in real time. This paper presents the
development of a catalog system that facilitates and allows the
creation, publishing, management and exploitation of augmented
multimedia contents and Augmented Reality applications, creating an
own space for anyone that wants to provide information to real
objects in order to edit and share it then online with others. These
spaces would be built for different domains without the initial need of
expert users. Its operation focuses on the context of Web 2.0 or
Social Web, with its various applications, developing contents to
enrich the real context in which human beings act permitting the
evolution of catalog’s contents in an emerging way.