Abstract: In the past, the most comprehensively adopted light
source was incandescent light bulbs, but with the appearance of LED
light sources, traditional light sources have been gradually replaced by
LEDs because of its numerous superior characteristics. However,
many of the standards do not apply to LEDs as the two light sources
are characterized differently. This also intensifies the significance of
studies on LEDs. As a Kansei design study investigating the visual
glare produced by traffic arrows implemented with LEDs, this study
conducted a semantic analysis on the styles of traffic arrows used in
domestic and international occasions. The results will be able to
reduce drivers’ misrecognition that results in the unsuccessful arrival
at the destination, or in traffic accidents. This study started with a
literature review and surveyed the status quo before conducting
experiments that were divided in two parts. The first part involved a
screening experiment of arrow samples, where cluster analysis was
conducted to choose five representative samples of LED displays. The
second part was a semantic experiment on the display of arrows using
LEDs, where the five representative samples and the selected ten
adjectives were incorporated. Analyzing the results with
Quantification Theory Type I, it was found that among the
composition of arrows, fletching was the most significant factor that
influenced the adjectives. In contrast, a “no fletching” design was
more abstract and vague. It lacked the ability to convey the intended
message and might bear psychological negative connotation including
“dangerous,” “forbidden,” and “unreliable.” The arrow design
consisting of “> shaped fletching” was found to be more concrete and
definite, showing positive connotation including “safe,” “cautious,”
and “reliable.” When a stimulus was placed at a farther distance, the
glare could be significantly reduced; moreover, the visual evaluation
scores would be higher. On the contrary, if the fletching and the shaft
had a similar proportion, looking at the stimuli caused higher
evaluation at a closer distance. The above results will be able to be
applied to the design of traffic arrows by conveying information
definitely and rapidly. In addition, drivers’ safety could be enhanced
by understanding the cause of glare and improving visual
recognizability.
Abstract: Advances in the field of image processing envision a
new era of evaluation techniques and application of procedures in
various different fields. One such field being considered is the
biomedical field for prognosis as well as diagnosis of diseases. This
plethora of methods though provides a wide range of options to select
from, it also proves confusion in selecting the apt process and also in
finding which one is more suitable. Our objective is to use a series of
techniques on bone scans, so as to detect the occurrence of
rheumatoid arthritis (RA) as accurately as possible. Amongst other
techniques existing in the field our proposed system tends to be more
effective as it depends on new methodologies that have been proved
to be better and more consistent than others. Computer aided
diagnosis will provide more accurate and infallible rate of
consistency that will help to improve the efficiency of the system.
The image first undergoes histogram smoothing and specification,
morphing operation, boundary detection by edge following algorithm
and finally image subtraction to determine the presence of
rheumatoid arthritis in a more efficient and effective way. Using preprocessing
noises are removed from images and using segmentation,
region of interest is found and Histogram smoothing is applied for a
specific portion of the images. Gray level co-occurrence matrix
(GLCM) features like Mean, Median, Energy, Correlation, Bone
Mineral Density (BMD) and etc. After finding all the features it
stores in the database. This dataset is trained with inflamed and noninflamed
values and with the help of neural network all the new
images are checked properly for their status and Rough set is
implemented for further reduction.
Abstract: The high efficiency power management IC (PMIC) with switching device is presented in this paper. PMIC is controlled with PFM control method in order to have high power efficiency at high current level. Dynamic Threshold voltage CMOS (DT-CMOS) with low on-resistance is designed to decrease conduction loss. The threshold voltage of DT-CMOS drops as the gate voltage increase, resulting in a much higher current handling capability than standard MOSFET. PFM control circuits consist of a generator, AND gate and comparator. The generator is made to have 1.2MHz oscillation voltage. The DC-DC converter based on PFM control circuit and low on-resistance switching device is presented in this paper.
Abstract: In this study, too, an attempt was made to reveal the
place and effects of information technologies on the lives and
education of gifted children based on the views of gifted. To this end,
the effects of information technologies on gifted are general skills,
technology use, academic and social skills, and cooperative and
personal skills were investigated. These skills were explored
depending on whether or not gifted had their own computers, had
internet connection at home, or how often they use the internet,
average time period they spent at the computer, how often they
played computer games and their use of social media.
The study was conducted using the screening model with a
quantitative approach. The sample of the study consisted of 129
gifted attending 5-12th classes in 12 provinces in different regions of
Turkey. 64 of the participants were female while 65 were male. The
research data were collected using the using computer of gifted and
information technologies (UCIT) questionnaire which was developed
by the researchers and given its final form after receiving expert
view.
As a result of the study, it was found that UCIT use improved
foreign language speaking skills of gifted, enabled them to get to
know and understand different cultures, and made use of computer
and information technologies while they study. At the end of the
study these result were obtained: Gifted have positive idea using
computer and communication technology. There are differences
whether using the internet about the ideas UCIT. But there are not
differences whether having computer, inhabited city, grade level,
having internet at home, daily and weekly internet usage durations,
playing the computer and internet game, having Facebook and
Twitter account about the UCIT.
UCIT contribute to the development of gifted vocabulary, allows
knowing and understand different cultures, developing foreign
language speaking skills, gifted do not give up computer when they
do their homework, improve their reading, listening, understanding
and writing skills in a foreign language.
Gifted children want to have transition to the use of tablets in
education. They think UCIT facilitates doing their homework,
contributes learning more information in a shorter time. They'd like
to use computer-assisted instruction programs at courses. They think
they will be more successful in the future if their computer skills are
good. But gifted students prefer teacher instead of teaching with
computers and they said that learning can be run from home without
going to school.
Abstract: The purpose of this study is to identify the teaching method practices of the practical work subject in Vocational Secondary School. This study examined the practice of Vocational Teaching Method in Automotive Practical Work. The quantitative method used the sets of the questionnaire. 283 students and 63 teachers involved from ten VSS involved in this research. Research finding showed in conducting the introduction session teachers prefer used the demonstration method and questioning technique. While in deliver the content of practical task, teachers applied group monitoring and problem solving approach. To conclude the task of automotive practical work, teachers choose re-explain and report writing to make sure students really understand all the process of teaching. VTM-APW also involved the competency-based concept to embed in the model. Derived from factors investigated, research produced the combination of elements in teaching skills and vocational skills which could be used as the best teaching method in automotive practical work for school level. As conclusion this study has concluded that the VTM-APW model is able to apply in teaching to make an improvement with current practices in Vocational Secondary School. Hence, teachers are suggested to use this method to enhance student's knowledge in Automotive and teachers will deliver skills to the current and future workforce relevant with the required competency skilled in workplace.
Abstract: The objective is to study the satisfaction on English with an online learning. Online learning system mainly consists of English lessons, exercises, tests, web boards, and supplementary lessons for language practice. The sample groups are 80 Thai students studying English for Business Communication, majoring in Hotel and Lodging Management. The data are analyzed by mean, standard deviation (S.D.) value from the questionnaires. The results were found that the most average of satisfaction on academic aspects are technological searching tool through E-learning system that support the students’ learning (4.51), knowledge evaluation on pre-post learning and teaching (4.45), and change for project selections according to their interest, subject contents including practice in the real situations (4.45), respectively.
Abstract: The aim of this study was to determine the antimicrobial effect of Helichrysum arenarium L. essential oil in "in-vitro" condition on the growth of seven microbial species including Bacillus subtilis, Escherichia coli, Staphylococcus aureus, Saccharomyces cereviciae, Candida albicans, Aspergillus flavus and Aspergillus parasiticus using micro-dilution method. The minimum inhibitory concentration (MIC) and minimum bactericidal or fungicidal concentration (MBC, MFC) were determined for the essential oil at ten concentrations. Finally, the sensitivity of tested microbes to essential oil of H. arenarium was investigated. Results showed that Bacillus subtilis (MIC=781.25 and MBC=6250 µg/ml) was more resistance than two other bacterial species. Among the tested yeasts, Saccharomyces cereviciae (MIC=97.65 and MFC=781.25 µg/ml) was more sensitive than Candida albicans while among the fungal species, growth of Aspergillus parasiticus inhibited at lower concentration of oil than the Aspergillus flavus. The extracted essential oil exhibited the same MIC value in the liquid medium against all fungal strains (48.82 µg/ml), while different activity against A. flavus and A. parasiticus was observed in this medium with MFC values of 6250 and 390.625µg/ml, respectively. The results of the present study indicated that Helichrysum arenarium L essential oil had significant (P
Abstract: This research aims to study the level of democratic political culture and the factors that affect the democratic political culture of 5th and 6th graders under the authority of Dusit District Office, Bangkok by using stratified sampling for probability sampling and using purposive sampling for non-probability sampling to collect data toward the distribution of questionnaires to 300 respondents. This covers all of the schools under the authority of Dusit District Office. The researcher analyzed the data by using descriptive statistics which include arithmetic mean, standard deviation, and inferential statistics which are Independent Samples T-test (T-test) and One-Way ANOVA (F-test). The researcher also collected data by interviewing the target groups, and then analyzed the data by the use of descriptive analysis. The result shows that 5th and 6th graders under the authority of Dusit District Office, Bangkok have exposed to democratic political culture at high level in overall. When considering each part, it found out that the part that has highest mean is “the constitutional democratic governmental system is suitable for Thailand” statement. The part with the lowest mean is “corruption (cheat and defraud) is normal in Thai society” statement. The factor that affects democratic political culture is grade levels, occupations of mothers, and attention in news and political movements.
Abstract: Each of the countries around the world has different
ways of management and many of them depend on people to
administrate their country. Thailand, for example, empowers the
sovereignty of Thai people under constitution; however, our Thai
voting system is not able to flow fast enough under the current
Political management system. The sovereignty of Thai people is
addressing this problem through representatives during current
elections, in order to set a new policy for the countries ideology to
change in the House and the Cabinet.
This is particularly important in a democracy to be developed
under our current political institution. The Organic Act on Political
Parties 2007 is the establishment we have today that is causing
confrontations within the establishment. There are many political
parties that will soon be abolished. Many political parties have
already been subsidized. This research study is to analyze the legal
problems with the political party establishment under the Organic Act
on Political Parties 2007.
This will focus on the freedom of each political establishment
compared to an effective political operation. Textbooks and academic
papers will be referenced from studies home and abroad.
The study revealed that Organic Act on Political Parties 2007 has
strict provisions on the political structure over the number of
members and the number of branches involved within political
parties system.
Such operations shall be completed within one year; but under the
existing laws the small parties are not able to participate with the
bigger parties. The cities are capable of fulfilling small political party
requirements but fail to become coalesced because the current laws
won't allow them to be united as one. It is important to allow all
independent political parties to join our current political structure.
Board members can’t help the smaller parties to become a large
organization under the existing Thai laws.
Creating a new establishment that functions efficiently throughout
all branches would be one solution to these legal problems between
all political parties. With this new operation, individual political
parties can participate with the bigger parties during elections. Until
current political institutions change their system to accommodate
public opinion, these current Thai laws will continue to be a problem
with all political parties in Thailand.
Abstract: Photoacoustic imaging (PAI) is a non-invasive and
non-ionizing imaging modality that combines the absorption contrast
of light with ultrasound resolution. Laser is used to deposit optical
energy into a target (i.e., optical fluence). Consequently, the target
temperature rises, and then thermal expansion occurs that leads to
generating a PA signal. In general, most image reconstruction
algorithms for PAI assume uniform fluence within an imaging object.
However, it is known that optical fluence distribution within the
object is non-uniform. This could affect the reconstruction of PA
images. In this study, we have investigated the influence of optical
fluence distribution on PA back-propagation imaging using finite
element method. The uniform fluence was simulated as a triangular
waveform within the object of interest. The non-uniform fluence
distribution was estimated by solving light propagation within a
tissue model via Monte Carlo method. The results show that the PA
signal in the case of non-uniform fluence is wider than the uniform
case by 23%. The frequency spectrum of the PA signal due to the
non-uniform fluence has missed some high frequency components in
comparison to the uniform case. Consequently, the reconstructed
image with the non-uniform fluence exhibits a strong smoothing
effect.
Abstract: In this paper, a backward semi-Lagrangian scheme
combined with the second-order backward difference formula
is designed to calculate the numerical solutions of nonlinear
advection-diffusion equations. The primary aims of this paper are
to remove any iteration process and to get an efficient algorithm
with the convergence order of accuracy 2 in time. In order to achieve
these objects, we use the second-order central finite difference and the
B-spline approximations of degree 2 and 3 in order to approximate
the diffusion term and the spatial discretization, respectively. For the
temporal discretization, the second order backward difference formula
is applied. To calculate the numerical solution of the starting point
of the characteristic curves, we use the error correction methodology
developed by the authors recently. The proposed algorithm turns out
to be completely iteration free, which resolves the main weakness
of the conventional backward semi-Lagrangian method. Also, the
adaptability of the proposed method is indicated by numerical
simulations for Burgers’ equations. Throughout these numerical
simulations, it is shown that the numerical results is in good
agreement with the analytic solution and the present scheme offer
better accuracy in comparison with other existing numerical schemes.
Abstract: In this paper, we introduce a method for improving
the embedded Runge-Kutta-Fehlberg4(5) method. At each integration
step, the proposed method is comprised of two equations for the
solution and the error, respectively. These solution and error are
obtained by solving an initial value problem whose solution has the
information of the error at each integration step. The constructed algorithm
controls both the error and the time step size simultaneously and
possesses a good performance in the computational cost compared to
the original method. For the assessment of the effectiveness, EULR
problem is numerically solved.
Abstract: This paper conducts a comparison study using KES-FB and PhabrOmeter to measure 58 selected warp knitted fabric hand properties. Fabric samples were selected and measured by both KES-FB and PhabrOmeter. Results show differences between these two measurement methods. Smoothness and stiffness values obtained by KES-FB were found significant correlated (p value = 0.003 and 0.022) to the PhabrOmeter results while softness values between two measurement methods did not show significant correlation (p value = 0.828). Disagreements among these two measurement methods imply limitations on different mechanism principles when facing warp knitted fabrics. Subjective measurement methods and further studies are suggested in order to ascertain deeper investigation on the mechanisms of fabric hand perceptions.
Abstract: Children today use computer based application in
various activities especially for learning and education. Many of
these tools and application such as the Computer Aided
Pronunciation Training (CAPT) systems enable children to explore
and experience them with little supervision from the adults. In order
for these tools and application to have maximum effect on the
children’s learning and education, it must be attractive to the children
to use them. This could be achieved with the proper user interface
(UI) design. As children grow, so do their ability, taste and
preferences. They interact differently with these applications as they
grow older. This study reviews several articles on how age factors
influence the UI design. The review focuses on age related abilities
such as cognitive, literacy, concentration and feedback requirement.
We have also evaluated few of existing CAPT systems and determine
the influence of age-based factors on the interface design.
Abstract: This paper proposes a linear mixed model (LMM) with spatial effects to forecast rice and cassava yields in Thailand at the same time. A multivariate conditional autoregressive (MCAR) model is assumed to present the spatial effects. A Bayesian method is used for parameter estimation via Gibbs sampling Markov Chain Monte Carlo (MCMC). The model is applied to the rice and cassava yields monthly data which have been extracted from the Office of Agricultural Economics, Ministry of Agriculture and Cooperatives of Thailand. The results show that the proposed model has better performance in most provinces in both fitting part and validation part compared to the simple exponential smoothing and conditional auto regressive models (CAR) from our previous study.
Abstract: This research aims to study tourism data and behavior
of foreign tourists visited Wat Phrachetuponwimolmangkalaram (Wat
Po) Sample groups are tourists who visited inside the temple, during
February, March, April and May 2013. Tools used in the research are
questionnaires constructed by the researcher, and samples are dawn
by Convenience sampling. There are 207 foreign tourists who are
willing to be respondents. Statistics used are percentage, average
mean and standard deviation.
The results of the research reveal that:
A. General Data of Respondents
The foreign tourists who visited the temple are mostly female
(57.5 %), most respondents are aged between 20-29 years (37.2%).
Most respondents live in Europe (62.3%), most of them got the
Bachelor’s degree (40.1%), British are mostly found (16.4%),
respondents who are students are also found (23.2%), and Christian
are mostly found (60.9%).
B. Tourists’ Behavior While Visiting the Temple Compound.
The result shows that the respondents came with family (46.4%),
have never visited the temples (40.6%), and visited once (42 %). It is
found that the foreign tourists’ inappropriate behavior are wearing
revealing attires (58.9%), touching or getting closed to the monks
(55.1%), and speaking loudly (46.9%) respectively.
The respondents’ outstanding objectives are to visit inside the
temple (57.5%), to pay respect to the Reclining Buddha Image in the
Viharn (44.4%) and to worship the Buddha image in the Phra Ubosod
(37.7%) respectively.
C. The Respondents’ Self-evaluation of Performance
It is found that over all tourists evaluated themselves in the highest
level averaged 4.40. When focusing on each item, it is shown that
they evaluated themselves in the highest level on obeying the temple
staff averaged 4.57, and cleanness concern of the temple averaged
4.52, well-behaved performance during the temple visit averaged
4.47 respectively.
Abstract: The effects of varying air temperature (full, ¾ full, ½ full aircon adjustment, no aircon) in polishing component of Single-Pass Mill on the quality of Philippine inbred rice variety, was investigated. Parameters measured were milling recovery (MR), headrice recovery (HR), and percentage with bran streaks. Cooling method (with aircon) increased MR, HR, and percentage with bran streaks of milled rice. Highest MR and HR (67.62%; 47.33%) were obtained from ¾ full adjustment whereas no aircon were lowest (66.27%; 39.76%). Temperature in polishing component at ¾ full adjustment was 33oC whereas no aircon was 45oC. There was increase of 1.35% in MR and 7.57% in HR. Additional cost of milling per kg due to aircon cooling was P0.04 at 300 tons/yr volume, with 0.15 yr payback period. Net income was estimated at ₱98,100.00. Percentage of kernels with bran streaks increased from 5%–14%, indicating more nutrients of milled rice.
Abstract: This study investigates the role and impact of English loan words on Japanese language in travel brochures. The issues arising from a potential switch to English as a tool to absorb the West’s advanced knowledge and technology in the modernization of Japan to a means of linking Japan with the rest of the world and enhancing the country’s international presence. Sociolinguistic contexts was used to analyze data collected from the Nippon Travel agency "HIS"’s brochures in Thailand, revealing that English plays the most important role as lexical gap fillers and special effect givers. An increasing mixer of English to Japanese affects how English is misused, the way the Japanese see the world and the present generation’s communication gap.
Abstract: Tsunami early detection and warning systems have proved to be of ultimate importance, especially after the destructive tsunami that hit Japan in March 2012. Such systems are crucial to inform the authorities of any risk of a tsunami and of the degree of its danger in order to make the right decision and notify the public of the actions they need to take to save their lives. The purpose of this research is to enhance existing tsunami detection and warning systems. We first propose an automated and miniaturized model of an early tsunami detection and warning system. The model for the operation of a tsunami warning system is simulated using the data acquisition toolbox of Matlab and measurements acquired from specified internet pages due to the lack of the required real-life sensors, both seismic and hydrologic, and building a graphical user interface for the system. In the second phase of this work, we implement various satellite image filtering schemes to enhance the acquired synthetic aperture radar images of the tsunami affected region that are masked by speckle noise. This enables us to conduct a post-tsunami damage extent study and calculate the percentage damage. We conclude by proposing improvements to the existing telecommunication infrastructure of existing warning tsunami systems using a migration to IP-based networks and fiber optics links.
Abstract: The process of thermoforming a carbon fiber reinforced thermoplastic (CFRTP) has increased its presence in the automotive industry for its wide applicability to the mass production car. A non-isothermal forming for CFRTP can shorten its cycle time to less than 1 minute. In this paper, the textile reinforcement FE model which the authors proposed in a previous work is extended to the CFRTP model for non-isothermal forming simulation. The effect of thermoplastic is given by adding shell elements which consider thermal effect to the textile reinforcement model. By applying Reuss model to the stress calculation of thermoplastic, the proposed model can accurately predict in-plane shear behavior, which is the key deformation mode during forming, in the range of the process temperature. Using the proposed model, thermoforming simulation was conducted and the results are in good agreement with the experimental results.