Abstract: Incineration of municipal solid waste (MSW) is one of
the key scopes in the global clean energy strategy. A computational
fluid dynamics (CFD) model was established in order to reveal these
features of the combustion process in a fixed porous bed of MSW.
Transporting equations and process rate equations of the waste bed
were modeled and set up to describe the incineration process,
according to the local thermal conditions and waste property
characters. Gas phase turbulence was modeled using k-ε turbulent
model and the particle phase was modeled using the kinetic theory of
granular flow. The heterogeneous reaction rates were determined
using Arrhenius eddy dissipation and the Arrhenius-diffusion
reaction rates. The effects of primary air flow rate and temperature in
the burning process of simulated MSW are investigated
experimentally and numerically. The simulation results in bed are
accordant with experimental data well. The model provides detailed
information on burning processes in the fixed bed, which is otherwise
very difficult to obtain by conventional experimental techniques.
Abstract: Rice husk and kenaf filled with calcium carbonate
(CaCO3) and high density polyethylene (HDPE) composite were
prepared separately using twin-screw extruder at 50rpm. Different
filler loading up to 30 parts of rice husk particulate and kenaf fiber
were mixed with the fixed 30% amount of CaCO3 mineral filler to
produce rice husk/CaCO3/HDPE and kenaf/CaCO3/HDPE hybrid
composites. In this study, the effects of natural fiber for both rice
husk and kenaf in CaCO3/HDPE composite on physical, mechanical
and morphology properties were investigated. Field Emission
Scanning Microscope (FeSEM) was used to investigate the impact
fracture surfaces of the hybrid composite. The property analyses
showed that water absorption increased with the presence of kenaf
and rice husk fillers. Natural fibers in composite significantly
influence water absorption properties due to natural characters of
fibers which contain cellulose, hemicellulose and lignin structures.
The result showed that 10% of additional natural fibers into hybrid
composite had caused decreased flexural strength, however additional
of high natural fiber (>10%) filler loading has proved to increase its
flexural strength.
Abstract: In this paper, a direct power control (DPC)
strategies have been investigated in order to control a high
power AC/DC converter with time variable load. This converter
is composed of a three level three phase neutral point clamped
(NPC) converter as rectifier and an H-bridge four quadrant
current control converter. In the high power application,
controller not only must adjust the desire outputs but also
decrease the level of distortions which are injected to the network
from the converter. Regarding to this reason and nonlinearity
of the power electronic converter, the conventional controllers
cannot achieve appropriate responses. In this research, the
precise mathematical analysis has been employed to design the
appropriate controller in order to control the time variable
load. A DPC controller has been proposed and simulated using
Matlab/ Simulink. In order to verify the simulation result, a real
time simulator- OPAL-RT- has been employed. In this paper,
the dynamic response and stability of the high power NPC
with variable load has been investigated and compared with
conventional types using a real time simulator. The results proved
that the DPC controller is more stable and has more precise
outputs in comparison with conventional controller.
Abstract: In the past researchers have questioned the
effectiveness of ethics training in higher education. Also, there are
observations that support the view that ethical behaviour (range of
actions)/ethical decision making models used in the past make use of
vignettes to explain ethical behaviour. The understanding remains in
the perspective that these vignettes play a limited role in determining
individual intentions and not actions. Some authors have also agreed
that there are possibilities of differences in one’s intentions and
actions. This paper makes an attempt to fill those gaps by evaluating
real actions rather than intentions. In a way this study suggests the
use of an experiential methodology to explore Berlo’s model of
communication as an action along with orchestration of various
principles. To this endeavor, an attempt was made to use
conversational analysis in the pursuance of evaluating ethical
decision making behaviour among students and middle level
managers. The process was repeated six times with the set of an
average of 15 participants. Similarities have been observed in the
behaviour of students and middle level managers that calls for
understanding that both the groups of individuals have no cognizance
of their actual actions. The deliberations derived out of conversation
were taken a step forward for meta-ethical evaluations to portray a
clear picture of ethical behaviour among participants. This study
provides insights for understanding demonstrated unconscious human
behaviour which may fortuitously be termed both ethical and
unethical.
Abstract: Traditional document representation for classification
follows Bag of Words (BoW) approach to represent the term weights.
The conventional method uses the Vector Space Model (VSM) to
exploit the statistical information of terms in the documents and they
fail to address the semantic information as well as order of the terms
present in the documents. Although, the phrase based approach
follows the order of the terms present in the documents rather than
semantics behind the word. Therefore, a semantic concept based
approach is used in this paper for enhancing the semantics by
incorporating the ontology information. In this paper a novel method
is proposed to forecast the intraday stock market price directional
movement based on the sentiments from Twitter and money control
news articles. The stock market forecasting is a very difficult and
highly complicated task because it is affected by many factors such
as economic conditions, political events and investor’s sentiment etc.
The stock market series are generally dynamic, nonparametric, noisy
and chaotic by nature. The sentiment analysis along with wisdom of
crowds can automatically compute the collective intelligence of
future performance in many areas like stock market, box office sales
and election outcomes. The proposed method utilizes collective
sentiments for stock market to predict the stock price directional
movements. The collective sentiments in the above social media have
powerful prediction on the stock price directional movements as
up/down by using Granger Causality test.
Abstract: These days customer satisfaction plays vital role in
any business. When customer searches for a product, significantly a
junk of irrelevant information is what is given, leading to customer
dissatisfaction. To provide exactly relevant information on the
searched product, we are proposing a model of KaaS (Knowledge as
a Service), which pre-processes the information using decision
making paradigm using Multi-agents.
Information obtained from various sources is taken to derive
knowledge and they are linked to Cloud to capture new idea. The
main focus of this work is to acquire relevant information
(knowledge) related to product, then convert this knowledge into a
service for customer satisfaction and deploy on cloud.
For achieving these objectives we are have opted to use multi
agents. They are communicating and interacting with each other,
manipulate information, provide knowledge, to take decisions. The
paper discusses about KaaS as an intelligent approach for Knowledge
acquisition.
Abstract: This paper describes an Action Research project
which was undertaken to inform professional practice in order to
develop a newly created Centre for Student Success in the specific
context of transnational medical and nursing education in the Middle
East. The objectives were to enhance the academic performance,
persistence, integration and personal and professional development of
a multinational study body, in particular in relation to pre-clinical
medical students, and to establish a comfortable, friendly and
student-driven environment within an Irish medical university
recently established in Bahrain. The outcomes of the project resulted
in the development of a specific student success ‘signature’ for this
particular transnational higher education context.
Abstract: Dengue outbreaks are affected by biological,
ecological, socio-economic and demographic factors that vary over
time and space. These factors have been examined separately and still
require systematic clarification. The present study aimed to investigate
the spatial-temporal clustering relationships between these factors and
dengue outbreaks in the northern region of Sri Lanka. Remote sensing
(RS) data gathered from a plurality of satellites were used to develop
an index comprising rainfall, humidity and temperature data. RS data
gathered by ALOS/AVNIR-2 were used to detect urbanization, and a
digital land cover map was used to extract land cover information.
Other data on relevant factors and dengue outbreaks were collected
through institutions and extant databases. The analyzed RS data and
databases were integrated into geographic information systems,
enabling temporal analysis, spatial statistical analysis and space-time
clustering analysis. Our present results showed that increases in the
number of the combination of ecological factor and socio-economic
and demographic factors with above the average or the presence
contribute to significantly high rates of space-time dengue clusters.
Abstract: In this paper, the exergy analysis of vapor absorption
refrigeration system using LiBr-H2O as working fluid is carried out
with the modified Gouy-Stodola approach rather than the classical
Gouy-Stodola equation and effect of varying input parameters is also
studied on the performance of the system. As the modified approach
uses the concept of effective temperature, the mathematical
expressions for effective temperature have been formulated and
calculated for each component of the system. Various constraints and
equations are used to develop program in EES to solve these
equations. The main aim of this analysis is to determine the
performance of the system and the components having major
irreversible loss. Results show that exergy destruction rate is
considerable in absorber and generator followed by evaporator and
condenser. There is an increase in exergy destruction in generator,
absorber and condenser and decrease in the evaporator by the
modified approach as compared to the conventional approach. The
value of exergy determined by the modified Gouy-Stodola equation
deviates maximum i.e. 26% in the generator as compared to the
exergy calculated by the classical Gouy-Stodola method.
Abstract: Improved resource efficiency of production is a key
requirement for sustainable growth, worldwide. In this regards, by
considering the energy and tourism as the extra inputs to the classical
Coub-Douglas production function, this study aims at investigating
the efficiency changes in the North African countries. To this end, the
study uses panel data for the period 1995-2010 and adopts the
Malmquist index based on the data envelopment analysis. Results
show that tourism increases technical and scale efficiencies, while it
decreases technological and total factor productivity changes. On the
other hand, when the production function is augmented by the energy
input; technical efficiency change decreases, while the technological
change, scale efficiency change and total factor productivity change
increase. Thus, in order to satisfy the needs for sustainable growth,
North African governments should take some measures for increasing
the contribution that the tourism makes to economic growth and some
others for efficient use of resources in the energy sector.
Abstract: Wireless Sensor Networks (WSNs) have wide variety
of applications and provide limitless future potentials. Nodes in
WSNs are prone to failure due to energy depletion, hardware failure,
communication link errors, malicious attacks, and so on. Therefore,
fault tolerance is one of the critical issues in WSNs. We study how
fault tolerance is addressed in different applications of WSNs. Fault
tolerant routing is a critical task for sensor networks operating in
dynamic environments. Many routing, power management, and data
dissemination protocols have been specifically designed for WSNs
where energy awareness is an essential design issue. The focus,
however, has been given to the routing protocols which might differ
depending on the application and network architecture.
Abstract: Cloud computing is a new technology in industry and
academia. The technology has grown and matured in last half decade
and proven their significant role in changing environment of IT
infrastructure where cloud services and resources are offered over the
network. Cloud technology enables users to use services and
resources without being concerned about the technical implications of
technology. There are substantial research work has been performed
for the usage of cloud computing in educational institutes and
majority of them provides cloud services over high-end blade servers
or other high-end CPUs. However, this paper proposes a new stack
called “CiCKAStack” which provide cloud services over unutilized
computing resources, named as commodity computers.
“CiCKAStack” provides IaaS and PaaS using underlying commodity
computers. This will not only increasing the utilization of existing
computing resources but also provide organize file system, on
demand computing resource and design and development
environment.
Abstract: International and domestic environmental law has
evolved quite rapidly in the last few decades. At the international
level the Stockholm and Rio Declarations paved the way for a broad
based consensus of the international community on environmental
issues and principles. At the Domestic level also many states have
incorporated environmental protection in their constitutions and even
more states are doing the same at least in their domestic legislations.
In this process of evolution environmental law has unleashed a
number of novel principles such as; the participatory principle, the
polluter pays principle, the precautionary principle, the intergenerational
and intra-generational principles, the prevention
principle, the sustainable development principle and so on.
Abstract: Applications of the Hausdorff space and its mappings
into tangent spaces are outlined, including their fractal dimensions
and self-similarities. The paper details this theory set up and further
describes virtualizations and atomization of manufacturing processes.
It demonstrates novel concurrency principles that will guide
manufacturing processes and resources configurations. Moreover,
varying levels of details may be produced by up folding and breaking
down of newly introduced generic models. This choice of layered
generic models for units and systems aspects along specific aspects
allows research work in parallel to other disciplines with the same
focus on all levels of detail. More credit and easier access are granted
to outside disciplines for enriching manufacturing grounds. Specific
mappings and the layers give hints for chances for interdisciplinary
outcomes and may highlight more details for interoperability
standards, as already worked on the international level. The new rules
are described, which require additional properties concerning all
involved entities for defining distributed decision cycles, again on the
base of self-similarity. All properties are further detailed and assigned
to a maturity scale, eventually displaying the smartness maturity of a
total shopfloor or a factory. The paper contributes to the intensive
ongoing discussion in the field of intelligent distributed
manufacturing and promotes solid concepts for implementations of
Cyber Physical Systems and the Internet of Things into
manufacturing industry, like industry 4.0, as discussed in German-speaking
countries.
Abstract: Nanofibers are effective materials which have
frequently been investigated to produce high quality air filters. As an
environmental approach our aim is to achieve nanofibers by melting.
In spun-bond systems extruder, spin-pump, nozzle package and
attenuator are used. Molten polymer which flows from extruder is
made steady by spin-pump. Regular melt passes through nozzle holes
and forms fibers under high pressure. The fibers pulled from nozzle
are shrunk to micron size by an attenuator; after solidification, they
are collected on a conveyor. In this research different designs of
attenuator system have been studied; and also CFD analysis has been
done on these different designs. Afterwards, one of these designs
tested and finally some optimizations have been done to reduce
pressure loss and increase air velocity.
Abstract: Groundwater inflow to the tunnels is one of the most
important problems in tunneling operation. The objective of this
study is the investigation of model dimension effects on tunnel inflow
assessment in discontinuous rock masses using numerical modeling.
In the numerical simulation, the model dimension has an important
role in prediction of water inflow rate. When the model dimension is
very small, due to low distance to the tunnel border, the model
boundary conditions affect the estimated amount of groundwater flow
into the tunnel and results show a very high inflow to tunnel. Hence,
in this study, the two-dimensional universal distinct element code
(UDEC) used and the impact of different model parameters, such as
tunnel radius, joint spacing, horizontal and vertical model domain
extent has been evaluated. Results show that the model domain extent
is a function of the most significant parameters, which are tunnel
radius and joint spacing.
Abstract: Using the first-principles full-potential linearized
augmented plane wave plus local orbital (FP-LAPW+lo) method
based on density functional theory (DFT), we have investigated the
electronic structure and magnetism of full Heusler alloys Co2ZrGe
and Co2NbB. These compounds are predicted to be half-metallic
ferromagnets (HMFs) with a total magnetic moment of 2.000 B per
formula unit, well consistent with the Slater-Pauling rule.
Calculations show that both the alloys have an indirect band gaps, in
the minority-spin channel of density of states (DOS), with values of
0.58 eV and 0.47 eV for Co2ZrGe and Co2NbB, respectively.
Analysis of the DOS and magnetic moments indicates that their
magnetism is mainly related to the d-d hybridization between the Co
and Zr (or Nb) atoms. The half-metallicity is found to be relatively
robust against volume changes. In addition, an atom inside molecule
AIM formalism and an electron localization function ELF were also
adopted to study the bonding properties of these compounds, building
a bridge between their electronic and bonding behavior.
As they have a good crystallographic compatibility with the lattice of
semiconductors used industrially and negative calculated cohesive
energies with considerable absolute values these two alloys could be
promising magnetic materials in the spintronic field.
Abstract: An innovative concept called “Flexy-Energy” is developing at 2iE. This concept aims to produce electricity at lower cost by smartly mix different available energy sources in accordance to the load profile of the region. With a higher solar irradiation and due to the fact that Diesel generator are massively used in sub-Saharan rural areas, PV/Diesel hybrid systems could be a good application of this concept and a good solution to electrify this region, provided they are reliable, cost effective and economically attractive to investors. Presentation of the developed approach is the aims of this paper. The PV/Diesel hybrid system designed consists to produce electricity and/or heat from a coupling between Diesel Diesel generators and PV panels without batteries storage, while ensuring the substitution of gasoil by bio-fuels available in the area where the system will be installed. The optimal design of this system is based on his technical performances; the Life Cycle Cost (LCC) and Levelized Cost of Energy are developed and use as economic criteria. The Net Present Value (NPV), the internal rate of return (IRR) and the discounted payback (DPB) are also evaluated according to dual electricity pricing (in sunny and unsunny hours). The PV/Diesel hybrid system obtained is compared to the standalone Diesel Diesel generators. The approach carried out in this paper has been applied to Siby village in Mali (Latitude 12 ° 23'N 8 ° 20'W) with 295 kWh as daily demand.This approach provides optimal physical characteristics (size of the components, number of component) and dynamical characteristics in real time (number of Diesel generator on, their load rate, fuel specific consumptions, and PV penetration rate) of the system. The system obtained is slightly cost effective; but could be improved with optimized tariffing strategies.
Abstract: Corrosion of concrete sewer pipes induced by sulfuric
acid is an acknowledged problem and a ticking time-bomb to sewer
operators. Whilst the chemical reaction of the corrosion process is
well-understood, the indirect roles of other parameters in the
corrosion process which are found in sewer environment are not
highly reflected on. This paper reports on a field studies undertaken
in Austria and United Kingdom, where the parameters of
temperature, pH, H2S and CO2 were monitored over a period of time.
The study establishes that (i) effluent temperature and pH have
similar daily pattern and peak times, when examined in minutes
scale; (ii) H2S and CO2 have an identical hourly pattern; (iii) H2S
instant or shifted relation to effluent temperature is governed by the
root mean square value of CO2.
Abstract: This paper examines the effect of the volatility of oil
prices on food price in South Africa using monthly data covering the
period 2002:01 to 2014:09. Food price is measured by the South
African consumer price index for food while oil price is proxied by
the Brent crude oil. The study employs the GARCH-in-mean VAR
model, which allows the investigation of the effect of a negative and
positive shock in oil price volatility on food price. The model also
allows the oil price uncertainty to be measured as the conditional
standard deviation of a one-step-ahead forecast error of the change in
oil price. The results show that oil price uncertainty has a positive
and significant effect on food price in South Africa. The responses of
food price to a positive and negative oil price shocks is asymmetric.