Abstract: Shadows add great amount of realism to a scene and
many algorithms exists to generate shadows. Recently, Shadow
volumes (SVs) have made great achievements to place a valuable
position in the gaming industries. Looking at this, we concentrate on
simple but valuable initial partial steps for further optimization in SV
generation, i.e.; model simplification and silhouette edge detection
and tracking. Shadow volumes (SVs) usually takes time in generating
boundary silhouettes of the object and if the object is complex then
the generation of edges become much harder and slower in process.
The challenge gets stiffer when real time shadow generation and
rendering is demanded. We investigated a way to use the real time
silhouette edge detection method, which takes the advantage of
spatial and temporal coherence, and exploit the level-of-details
(LOD) technique for reducing silhouette edges of the model to use
the simplified version of the model for shadow generation speeding
up the running time. These steps highly reduce the execution time of
shadow volume generations in real-time and are easily flexible to any
of the recently proposed SV techniques. Our main focus is to exploit
the LOD and silhouette edge detection technique, adopting them to
further enhance the shadow volume generations for real time
rendering.
Abstract: We prove detailed analysis of a waveguide-based Schottky barrier photodetector (SBPD) where a thin silicide film is put on the top of a silicon-on-insulator (SOI) channel waveguide to absorb light propagating along the waveguide. Taking both the confinement factor of light absorption and the wall scanning induced gain of the photoexcited carriers into account, an optimized silicide thickness is extracted to maximize the effective gain, thereby the responsivity. For typical lengths of the thin silicide film (10-20 Ðçm), the optimized thickness is estimated to be in the range of 1-2 nm, and only about 50-80% light power is absorbed to reach the maximum responsivity. Resonant waveguide-based SBPDs are proposed, which consist of a microloop, microdisc, or microring waveguide structure to allow light multiply propagating along the circular Si waveguide beneath the thin silicide film. Simulation results suggest that such resonant waveguide-based SBPDs have much higher repsonsivity at the resonant wavelengths as compared to the straight waveguidebased detectors. Some experimental results about Si waveguide-based SBPD are also reported.
Abstract: In this paper a new fast simplification method is presented. Such method realizes Karnough map with large number of variables. In order to accelerate the operation of the proposed method, a new approach for fast detection of group of ones is presented. Such approach implemented in the frequency domain. The search operation relies on performing cross correlation in the frequency domain rather than time one. It is proved mathematically and practically that the number of computation steps required for the presented method is less than that needed by conventional cross correlation. Simulation results using MATLAB confirm the theoretical computations. Furthermore, a powerful solution for realization of complex functions is given. The simplified functions are implemented by using a new desigen for neural networks. Neural networks are used because they are fault tolerance and as a result they can recognize signals even with noise or distortion. This is very useful for logic functions used in data and computer communications. Moreover, the implemented functions are realized with minimum amount of components. This is done by using modular neural nets (MNNs) that divide the input space into several homogenous regions. Such approach is applied to implement XOR function, 16 logic functions on one bit level, and 2-bit digital multiplier. Compared to previous non- modular designs, a clear reduction in the order of computations and hardware requirements is achieved.
Abstract: Today with the rapid growth of telecommunications equipment, electronic and developing more and more networks of power, influence of electromagnetic waves on one another has become hot topic discussions. So in this article, this issue and appropriate mechanisms for EMC operations have been presented. First, a source of alternating current (50 Hz) and a clear victim in a certain distance from the source is placed. With this simple model, the effects of electromagnetic radiation from the source to the victim will be investigated and several methods to reduce these effects have been presented. Therefore passive and active shields have been used. In some steps, shielding effectiveness of proposed shields will be compared. . It should be noted that simulations have been done by the finite element method (FEM).
Abstract: In this paper, an algorithm for detecting and attenuating
puff noises frequently generated under the mobile environment is
proposed. As a baseline system, puff detection system is designed
based on Gaussian Mixture Model (GMM), and 39th Mel Frequency
Cepstral Coefficient (MFCC) is extracted as feature parameters. To
improve the detection performance, effective acoustic features for puff
detection are proposed. In addition, detected puff intervals are
attenuated by high-pass filtering. The speech recognition rate was
measured for evaluation and confusion matrix and ROC curve are used
to confirm the validity of the proposed system.
Abstract: Despite the fact that Arabic language is currently one
of the most common languages worldwide, there has been only a
little research on Arabic speech recognition relative to other
languages such as English and Japanese. Generally, digital speech
processing and voice recognition algorithms are of special
importance for designing efficient, accurate, as well as fast automatic
speech recognition systems. However, the speech recognition process
carried out in this paper is divided into three stages as follows: firstly,
the signal is preprocessed to reduce noise effects. After that, the
signal is digitized and hearingized. Consequently, the voice activity
regions are segmented using voice activity detection (VAD)
algorithm. Secondly, features are extracted from the speech signal
using Mel-frequency cepstral coefficients (MFCC) algorithm.
Moreover, delta and acceleration (delta-delta) coefficients have been
added for the reason of improving the recognition accuracy. Finally,
each test word-s features are compared to the training database using
dynamic time warping (DTW) algorithm. Utilizing the best set up
made for all affected parameters to the aforementioned techniques,
the proposed system achieved a recognition rate of about 98.5%
which outperformed other HMM and ANN-based approaches
available in the literature.
Abstract: The Sphere Method is a flexible interior point algorithm for linear programming problems. This was developed mainly by Professor Katta G. Murty. It consists of two steps, the centering step and the descent step. The centering step is the most expensive part of the algorithm. In this centering step we proposed some improvements such as introducing two or more initial feasible solutions as we solve for the more favorable new solution by objective value while working with the rigorous updates of the feasible region along with some ideas integrated in the descent step. An illustration is given confirming the advantage of using the proposed procedure.
Abstract: Automatic detection of syllable repetition is one of the
important parameter in assessing the stuttered speech objectively.
The existing method which uses artificial neural network (ANN)
requires high levels of agreement as prerequisite before attempting to
train and test ANNs to separate fluent and nonfluent. We propose
automatic detection method for syllable repetition in read speech for
objective assessment of stuttered disfluencies which uses a novel
approach and has four stages comprising of segmentation, feature
extraction, score matching and decision logic. Feature extraction is
implemented using well know Mel frequency Cepstra coefficient
(MFCC). Score matching is done using Dynamic Time Warping
(DTW) between the syllables. The Decision logic is implemented by
Perceptron based on the score given by score matching. Although
many methods are available for segmentation, in this paper it is done
manually. Here the assessment by human judges on the read speech
of 10 adults who stutter are described using corresponding method
and the result was 83%.
Abstract: A state of the art Speaker Identification (SI) system
requires a robust feature extraction unit followed by a speaker
modeling scheme for generalized representation of these features.
Over the years, Mel-Frequency Cepstral Coefficients (MFCC)
modeled on the human auditory system has been used as a standard
acoustic feature set for speech related applications. On a recent
contribution by authors, it has been shown that the Inverted Mel-
Frequency Cepstral Coefficients (IMFCC) is useful feature set for
SI, which contains complementary information present in high
frequency region. This paper introduces the Gaussian shaped filter
(GF) while calculating MFCC and IMFCC in place of typical
triangular shaped bins. The objective is to introduce a higher
amount of correlation between subband outputs. The performances
of both MFCC & IMFCC improve with GF over conventional
triangular filter (TF) based implementation, individually as well as
in combination. With GMM as speaker modeling paradigm, the
performances of proposed GF based MFCC and IMFCC in
individual and fused mode have been verified in two standard
databases YOHO, (Microphone Speech) and POLYCOST
(Telephone Speech) each of which has more than 130 speakers.
Abstract: In this paper, we propose a morphing method by which face color images can be freely transformed. The main focus of this work is the transformation of one face image to another. This method is fully automatic in that it can morph two face images by automatically detecting all the control points necessary to perform the morph. A face detection neural network, edge detection and medium filters are employed to detect the face position and features. Five control points, for both the source and target images, are then extracted based on the facial features. Triangulation method is then used to match and warp the source image to the target image using the control points. Finally color interpolation is done using a color Gaussian model that calculates the color for each particular frame depending on the number of frames used. A real coded Genetic algorithm is used in both the image warping and color blending steps to assist in step size decisions and speed up the morphing. This method results in ''very smooth'' morphs and is fast to process.
Abstract: Like other external sorting algorithms, the presented
algorithm is a two step algorithm including internal and external
steps. The first part of the algorithm is like the other similar
algorithms but second part of that is including a new easy
implementing method which has reduced the vast number of inputoutput
operations saliently. As decreasing processor operating time
does not have any effect on main algorithm speed, any improvement
in it should be done through decreasing the number of input-output
operations. This paper propose an easy algorithm for choose the
correct record location of the final list. This decreases the time
complexity and makes the algorithm faster.
Abstract: The main objective of this work is to provide a fault detection and isolation based on Markov parameters for residual generation and a neural network for fault classification. The diagnostic approach is accomplished in two steps: In step 1, the system is identified using a series of input / output variables through an identification algorithm. In step 2, the fault is diagnosed comparing the Markov parameters of faulty and non faulty systems. The Artificial Neural Network is trained using predetermined faulty conditions serves to classify the unknown fault. In step 1, the identification is done by first formulating a Hankel matrix out of Input/ output variables and then decomposing the matrix via singular value decomposition technique. For identifying the system online sliding window approach is adopted wherein an open slit slides over a subset of 'n' input/output variables. The faults are introduced at arbitrary instances and the identification is carried out in online. Fault residues are extracted making a comparison of the first five Markov parameters of faulty and non faulty systems. The proposed diagnostic approach is illustrated on benchmark problems with encouraging results.
Abstract: In this study, a classification-based video
super-resolution method using artificial neural network (ANN) is
proposed to enhance low-resolution (LR) to high-resolution (HR)
frames. The proposed method consists of four main steps:
classification, motion-trace volume collection, temporal adjustment,
and ANN prediction. A classifier is designed based on the edge
properties of a pixel in the LR frame to identify the spatial information.
To exploit the spatio-temporal information, a motion-trace volume is
collected using motion estimation, which can eliminate unfathomable
object motion in the LR frames. In addition, temporal lateral process is
employed for volume adjustment to reduce unnecessary temporal
features. Finally, ANN is applied to each class to learn the complicated
spatio-temporal relationship between LR and HR frames. Simulation
results show that the proposed method successfully improves both
peak signal-to-noise ratio and perceptual quality.
Abstract: Let T and S be a subspace of Cn and Cm, respectively.
Then for A ∈ Cm×n satisfied AT ⊕ S = Cm, the generalized
inverse A(2)
T,S is given by A(2)
T,S = (PS⊥APT )†. In this paper, a
finite formulae is presented to compute generalized inverse A(2)
T,S
under the concept of restricted inner product, which defined as <
A,B >T,S=< PS⊥APT,B > for the A,B ∈ Cm×n. By this
iterative method, when taken the initial matrix X0 = PTA∗PS⊥, the
generalized inverse A(2)
T,S can be obtained within at most mn iteration
steps in absence of roundoff errors. Finally given numerical example
is shown that the iterative formulae is quite efficient.
Abstract: Planning of economic activities development has various dimensions one of which determines adequate capacity of economic activities in provinces regarding the government-s goals. Paralleling planning goals of economic activities development including subjects being focused on the view statement is effective to better realize the statement's goals. Current paper presents a native framework for economic activities development in provincial level. Triple steps within the framework are concordant with the view statement-s goals achievement. At first step of the proposed framework, economic activities are being prioritized in terms of employment indices, and secondly economic activities regarding to the province's relative advantages are being recognized. In the third step, desirable capacity of economic activities is determined with regards to the government's goals and effective constraints in economic activities development. Development of economic activities related to the provinces- relative advantages, contributes on regional balance and on equal development of economic activities. Furthermore, results of the framework enable more confident investment, affect employment development and remove unemployment concern as the main goals of the view statement.
Abstract: This paper proposes new enhancement models to the
methods of nonlinear anisotropic diffusion to greatly reduce speckle
and preserve image features in medical ultrasound images. By
incorporating local physical characteristics of the image, in this case
scatterer density, in addition to the gradient, into existing tensorbased
image diffusion methods, we were able to greatly improve the
performance of the existing filtering methods, namely edge
enhancing (EE) and coherence enhancing (CE) diffusion. The new
enhancement methods were tested using various ultrasound images,
including phantom and some clinical images, to determine the
amount of speckle reduction, edge, and coherence enhancements.
Scatterer density weighted nonlinear anisotropic diffusion
(SDWNAD) for ultrasound images consistently outperformed its
traditional tensor-based counterparts that use gradient only to weight
the diffusivity function. SDWNAD is shown to greatly reduce
speckle noise while preserving image features as edges, orientation
coherence, and scatterer density. SDWNAD superior performances
over nonlinear coherent diffusion (NCD), speckle reducing
anisotropic diffusion (SRAD), adaptive weighted median filter
(AWMF), wavelet shrinkage (WS), and wavelet shrinkage with
contrast enhancement (WSCE), make these methods ideal
preprocessing steps for automatic segmentation in ultrasound
imaging.
Abstract: This research intends to introduce a new usage of Artificial Intelligent (AI) approaches in Stepping Stone Detection (SSD) fields of research. By using Self-Organizing Map (SOM) approaches as the engine, through the experiment, it is shown that SOM has the capability to detect the number of connection chains that involved in a stepping stones. Realizing that by counting the number of connection chain is one of the important steps of stepping stone detection and it become the research focus currently, this research has chosen SOM as the AI techniques because of its capabilities. Through the experiment, it is shown that SOM can detect the number of involved connection chains in Network-based Stepping Stone Detection (NSSD).
Abstract: It is crucial to quantitatively evaluate the treatment of
epilepsy patients. This study was undertaken to test the hypothesis that
compared to the healthy control subjects, the epilepsy patients have
abnormal resting-state connectivity. In this study, we used the
imaginary part of coherency to measure the resting-state connectivity.
The analysis results shown that compared to the healthy control
subjects, epilepsy patients tend to have abnormal rhythm brain
connectivity over their epileptic focus.
Abstract: The vertex connectivity of a graph is the smallest number of vertices whose deletion separates the graph or makes it trivial. This work is devoted to the problem of vertex connectivity test of graphs in a distributed environment based on a general and a constructive approach. The contribution of this paper is threefold. First, using a preconstructed spanning tree of the considered graph, we present a protocol to test whether a given graph is 2-connected using only local knowledge. Second, we present an encoding of this protocol using graph relabeling systems. The last contribution is the implementation of this protocol in the message passing model. For a given graph G, where M is the number of its edges, N the number of its nodes and Δ is its degree, our algorithms need the following requirements: The first one uses O(Δ×N2) steps and O(Δ×logΔ) bits per node. The second one uses O(Δ×N2) messages, O(N2) time and O(Δ × logΔ) bits per node. Furthermore, the studied network is semi-anonymous: Only the root of the pre-constructed spanning tree needs to be identified.
Abstract: In this paper, we propose a practical digital music matching system that is robust to variation in sound qualities. The proposed system is subdivided into two parts: client and server. The client part consists of the input, preprocessing and feature extraction modules. The preprocessing module, including the music onset module, revises the value gap occurring on the time axis between identical songs of different formats. The proposed method uses delta-grouped Mel frequency cepstral coefficients (MFCCs) to extract music features that are robust to changes in sound quality. According to the number of sound quality formats (SQFs) used, a music server is constructed with a feature database (FD) that contains different sub feature databases (SFDs). When the proposed system receives a music file, the selection module selects an appropriate SFD from a feature database; the selected SFD is subsequently used by the matching module. In this study, we used 3,000 queries for matching experiments in three cases with different FDs. In each case, we used 1,000 queries constructed by mixing 8 SQFs and 125 songs. The success rate of music matching improved from 88.6% when using single a single SFD to 93.2% when using quadruple SFDs. By this experiment, we proved that the proposed method is robust to various sound qualities.