Abstract: This paper concentrates on the sustainable traditional
architecture and urban planning in hot-humid regions of Iran. In a
vast country such as Iran with different climatic zones traditional
builders have presented series of logical solutions for human comfort.
The aim of this paper is to demonstrate traditional architecture in hothumid
climate of Iran as a sample of sustainable architecture. Iranian
traditional architecture has been able to response to environmental
problems for a long period of time. Its features are based on climatic
factors, local construction materials of hot-humid regions and culture.
This paper concludes that Iranian traditional architecture can be
addressed as a sustainable architecture.
Abstract: Within Rapid Prototyping technologies are used many
types of materials. Many of them are recyclable but there are still as
plastic like, so practically they do not degrade in the landfill.
Polylactic acid (PLA) is one of the special plastic materials, which
are biodegradable and available for 3D printing within Fused
Deposition Modeling (FDM) technology. The question is, if the
mechanical properties of produced models are comparable to similar
technical plastic materials which are usual for prototype production.
Presented paper shows the experiments results for tensile strength
measurements for specimens prepared with different 3D printer
settings and model orientation. Paper contains also the comparison of
tensile strength values with values measured on specimens produced
by conventional technologies as injection moulding.
Abstract: Reduction of energy consumption in built
infrastructure, through the installation of energy-efficient
technologies, is a major approach to achieving sustainability. In
practice, the viability of energy efficiency projects strongly depends
on the cost reimbursement and profitability. These projects are
subject to failure if the actual cost savings do not reimburse the
project cost promptly. In such cases, refinancing could be a solution
to benefit from the long-term returns of the project, if implemented
wisely. However, very little is still known about the effect of
refinancing options on financial performance of energy efficiency
projects. In order to fill this gap, the present study investigates the
financial behavior of energy efficiency projects with focus on
refinancing options, such as Leveraged Loans. A System Dynamics
(SD) model is introduced, and the model application is presented
using an actual case-study data. The case study results indicate that
while high-interest start-ups make using Leveraged Loan inevitable,
refinancing can rescue the project and bring about profitability. This
paper also presents some managerial implications of refinancing
energy efficiency projects based on the case-study analysis. Results
of this study help to implement financially viable energy efficiency
projects so that the community could benefit from their
environmental advantages widely.
Abstract: In this paper, the unstable angle of attack of a
FOXTROT aircraft is controlled by using Genetic Algorithm based
flight controller and the result is compared with the conventional
techniques like Tyreus-Luyben (TL), Ziegler-Nichols (ZN) and
Interpolation Rule (IR) for tuning the PID controller. In addition, the
performance indices like Mean Square Error (MSE), Integral Square
Error (ISE), and Integral Absolute Time Error (IATE) etc. are
improved by using Genetic Algorithm. It was established that the
error by using GA is very less as compared to the conventional
techniques thereby improving the performance indices of the
dynamic system.
Abstract: Cooperative groups through much research have been
recognized to churn remarkable achievements instead of solitary or
individualistic efforts. Based on Johnson and Johnson’s model of
cooperative learning, the five key components of cooperation are
positive interdependence, face-to-face promotive interaction,
individual accountability, social skills, and group processing. In
2011, the Malaysian Ministry of Higher Education (MOHE)
introduced the Holistic Student Development policy with the aim to
develop morally sound individuals equipped with lifelong learning
skills. The Community Service project was included in the
improvement initiative. The purpose of this study is to assess the
relationship of team-based learning in facilitating particularly
students’ positive interdependence and face-to-face promotive
interaction. The research methods involve in-depth interviews with
the team leaders and selected team members, and a content analysis
of the undergraduate students’ reflective journals. A significant
positive relationship was found between students’ progressive
outlook towards teamwork and the highlighted two components. The
key findings show that students have gained in their individual
learning and work results through teamwork and interaction with
other students. The inclusion of Community Service as a MOHE
subject resonates with cooperative learning methods that enhances
supportive relationships and develops students’ social skills together
with their professional skills.
Abstract: The analytical bright two soliton solution of the 3-
coupled nonlinear Schrödinger equations with variable coefficients in
birefringent optical fiber is obtained by Darboux transformation
method. To the design of ultra-speed optical devices, Soliton
interaction and control in birefringence fiber is investigated. Lax pair
is constructed for N coupled NLS system through AKNS method.
Using two-soliton solution, we demonstrate different interaction
behaviors of solitons in birefringent fiber depending on the choice of
control parameters. Our results shows that interactions of optical
solitons have some specific applications such as construction of logic
gates, optical computing, soliton switching, and soliton amplification
in wavelength division multiplexing (WDM) system.
Abstract: Broiler slaughter waste has become a major source of
pollution throughout the world. Utilization of broiler slaughter waste
by dry rendering process produced Rendered Chicken Oil (RCO), a
cheap raw material for biodiesel production and Carcass Meal a feed
ingredient for pets and fishes. Conversion of RCO into biodiesel may
open new vistas for generating wealth from waste besides controlling
the major havoc of environmental pollution. A two-step process to
convert RCO to good quality Biodiesel was invented. Acid catalysed
esterification of FFA followed by base catalysed transesterification of
triglycerides was carried out after meticulously standardizing the
methanol molar ratio, catalyst concentration, reaction temperature,
and reaction time to obtain the maximum biodiesel yield of 97.62%
and lowest glycerol yield of 6.96%. RCO biodiesel blend was tested
in a CRDI diesel engine. The results revealed that the blending of
commercial diesel with 20% RCO biodiesel (B20) lead to less engine
wear, a quieter engine and better fuel economy. The better lubricating
qualities of RCO B20 prevented over heating of engine, which
prolongs the engine life. RCO B20 can reduce the import of crude oil
and substantially reduce the engine emissions as proved by
significantly lower smoke levels, thus mitigating climatic changes.
Abstract: The purpose of this research is to investigate the
marketing mix that is perceived to be important for the small sized
hotels in Pattaya. This research provides insights through a review of
the marketing activities performed by the small sized hotels. Nine
owners & marketing manager of small sized hotels and resorts, all
local Chonburi people, were selected for an in-depth interview. The
research suggests that seven marketing mixes (e.g. Product, Price,
Place, Promotion, People, Physical Evidence and Process) were
commonly used by these hotels, however, three types – People, Price
and Physical Evidence were considered most important by the
owners.
Abstract: Lagos urban mini bus drivers play a critical role in the
transportation sector. The current major mode of transportation
within Lagos metropolis remains road transportation and this
confirms the relevance of urban mini-bus drivers in transporting the
populace to their various destinations. Other modes of transportation
such as the train and waterways are currently inadequate. Various
threats to the well-being of urban bus drivers include congested
traffic typical of modern day lifestyles, dwindling financial returns
due to long hours in traffic, fewer hours of sleep, inadequate diet,
time pressure, and assaults related to fare disputes. Several healthrelated
problems have been documented to be associated with urban
bus driving. For instance, greater rates of hypertension, obesity and
cholesterol level have been reported. Research studies are yet to
identify the influence of age and marital status on the well-being of
urban mini-bus drivers in Lagos metropolis. A study of this nature is
necessary as it is culturally perceived in Nigeria that older and
married people are especially influenced by family affiliation and
would behave in ways that would project positive outcomes. The
study sample consisted of 150 urban mini-bus drivers who were
conveniently sampled from six (6) different terminuses where their
journey begins and terminates. The well-being questionnaire was
administered to participants. The criteria for inclusion in the study
included the ability to read in English language and the confirmation
that interested participants were on duty and suited to be driving
mini-buses. Due to the nature of the job of bus driving, the researcher
administered the questionnaires on participants who were free and
willing to respond to the survey. All participants were males of
various age groups and of different marital statuses. Results of
analyses conducted revealed no significant influence of age and
marital status on the well-being of urban mini-bus drivers. This
indicates that the well-being of urban mini bus drivers is not
influenced by age or marital status. The findings of this study have
cultural implications. It negates the popularly held belief that older
and married people care more about their well-being than younger
and single people. It brings to fore the need to also identify and
consider other factors when certifying people for the job of urban bus
driving.
Abstract: This paper is concerned with the ways in which
Assisted Reproductive Technologies (ARTs) affect women’s lives
and perceptions regarding their infertility, contraception and
reproductive health. The paper is based on a qualitative feminist
survey study to explore and analyze issues arising from the use of
ARTs by women in New Delhi, the capital of India. A rapid growth in
the number of fertility clinics has been noticed recently. A critical
analysis of interviews revealed that these technologies are used and
developed for making profits at the cost of women’s lives. In this
way, these technologies are influencing and changing the traditional
patterns of motherhood requiring a rethinking about new ways of
reproduction introduced through the use of ARTs.
Abstract: Recovering resources from water purification sludge
(WPS) have been gradually stipulated in environmental protection
laws and regulations in many nations. Hence, reusing the WPS is
becoming an important topic, and recovering alum from WPS is one of
the many practical alternatives. Most previous research efforts have
been conducted on studying the amphoteric characteristic of aluminum
hydroxide for investigating the optimum pH range to dissolve the
Al(III) species from WPS, but it has been lack of reaction kinetics or
mechanisms related discussion. Therefore, in this investigation, water
purification sludge (WPS) solution was broken by ultrasound to make
particle size of reactants smaller, specific surface area larger.
According to the reaction kinetics, these phenomena let the dissolved
aluminum salt quantity increased and the reaction rate go faster.
Abstract: Chatter vibrations, occurring during cutting process,
cause vibration between the cutting tool and workpiece, which
deteriorates surface roughness and reduces tool life. The purpose of
this study is to investigate the influence of cutting parameters and
tool construction on surface roughness and vibration in turning of
aluminum alloy AA2024. A new design of cutting tool is proposed,
which is filled up with epoxy granite in order to improve damping
capacity of the tool. Experiments were performed at the lathe using
carbide cutting insert coated with TiC and two different cutting tools
made of AISI 5140 steel. Taguchi L9 orthogonal array was applied to
design of experiment and to optimize cutting conditions. By the help
of signal-to-noise ratio and analysis of variance the optimal cutting
condition and the effect of the cutting parameters on surface
roughness and vibration were determined. Effectiveness of Taguchi
method was verified by confirmation test. It was revealed that new
cutting tool with epoxy granite has reduced vibration and surface
roughness due to high damping properties of epoxy granite in
toolholder.
Abstract: Noninvasive diagnostics of diseases via breath
analysis has attracted considerable scientific and clinical interest for
many years and become more and more promising with the rapid
advancements in nanotechnology and biotechnology. The volatile
organic compounds (VOCs) in exhaled breath, which are mainly
blood borne, particularly provide highly valuable information about
individuals’ physiological and pathophysiological conditions.
Additionally, breath analysis is noninvasive, real-time, painless, and
agreeable to patients. We have developed a wireless sensor array
based on single-stranded DNA (ssDNA)-functionalized single-walled
carbon nanotubes (SWNT) for the detection of a number of
physiological indicators in breath. Seven DNA sequences were used
to functionalize SWNT sensors to detect trace amount of methanol,
benzene, dimethyl sulfide, hydrogen sulfide, acetone, and ethanol,
which are indicators of heavy smoking, excessive drinking, and
diseases such as lung cancer, breast cancer, and diabetes. Our test
results indicated that DNA functionalized SWNT sensors exhibit
great selectivity, sensitivity, and repeatability; and different
molecules can be distinguished through pattern recognition enabled
by this sensor array. Furthermore, the experimental sensing results
are consistent with the Molecular Dynamics simulated ssDNAmolecular
target interaction rankings. Thus, the DNA-SWNT sensor
array has great potential to be applied in chemical or biomolecular
detection for the noninvasive diagnostics of diseases and personal
health monitoring.
Abstract: The effects of the contact ball-lens on the soda lime
glass in laser thermal cleavage with a cw Nd-YAG laser were
investigated in this study. A contact ball-lens was adopted to generate
a bending force on the crack formation of the soda-lime glass in the
laser cutting process. The Nd-YAG laser beam (wavelength of 1064
nm) was focused through the ball-lens and transmitted to the soda-lime
glass, which was coated with a carbon film on the surface with a
bending force from a ball-lens to generate a tensile stress state on the
surface cracking. The fracture was controlled by the contact ball-lens
and a straight cutting was tested to demonstrate the feasibility.
Experimental observations on the crack propagation from the leading
edge, main section and trailing edge of the glass sheet were compared
with various mechanical and thermal loadings. Further analyses on the
stress under various laser powers and contact ball loadings were made
to characterize the innovative technology. The results show that the distributions of the side crack at the
leading and trailing edges are mainly dependent on the boundary
condition, contact force, cutting speed and laser power. With the
increase of the mechanical and thermal loadings, the region of the side
cracks might be dramatically reduced with proper selection of the
geometrical constrains. Therefore the application of the contact
ball-lens is a possible way to control the fracture in laser cleavage with
improved cutting qualities.
Abstract: The customers use the best compromise criterion
between price and quality of service (QoS) to select or change
their Service Provider (SP). The SPs share the same market and
are competing to attract more customers to gain more profit. Due
to the divergence of SPs interests, we believe that this situation is a
non-cooperative game of price and QoS. The game converges to an
equilibrium position known Nash Equilibrium (NE). In this work, we
formulate a game theoretic framework for the dynamical behaviors
of SPs. We use Genetic Algorithms (GAs) to find the price and
QoS strategies that maximize the profit for each SP and illustrate
the corresponding strategy in NE. In order to quantify how this NE
point is performant, we perform a detailed analysis of the price of
anarchy induced by the NE solution. Finally, we provide an extensive
numerical study to point out the importance of considering price and
QoS as a joint decision parameter.
Abstract: Fading noise degrades the performance of cellular
communication, most notably in femto- and pico-cells in 3G and 4G
systems. When the wireless channel consists of a small number of
scattering paths, the statistics of fading noise is not analytically
tractable and poses a serious challenge to developing closed
canonical forms that can be analysed and used in the design of
efficient and optimal receivers. In this context, noise is multiplicative
and is referred to as stochastically local fading. In many analytical
investigation of multiplicative noise, the exponential or Gamma
statistics are invoked. More recent advances by the author of this
paper utilized a Poisson modulated-weighted generalized Laguerre
polynomials with controlling parameters and uncorrelated noise
assumptions. In this paper, we investigate the statistics of multidiversity
stochastically local area fading channel when the channel
consists of randomly distributed Rayleigh and Rician scattering
centers with a coherent Nakagami-distributed line of sight component
and an underlying doubly stochastic Poisson process driven by a
lognormal intensity. These combined statistics form a unifying triply
stochastic filtered marked Poisson point process model.
Abstract: The increase of technogenic and natural accidents,
accompanied by air pollution, for example, by combustion products,
leads to the necessity of respiratory protection. This work is devoted to the development of a calorimetric method
and a device which allows investigating quickly the kinetics of
carbon dioxide sorption by chemisorbents on the base of potassium
superoxide in order to assess the protective properties of respiratory
protective closed circuit apparatus. The features of the traditional approach for determining the
sorption properties in a thin layer of chemisorbent are described, as
well as methods and devices, which can be used for the sorption
kinetics study. The authors developed an approach (as opposed to the traditional
approach) based on the power measurement of internal heat sources
in the chemisorbent layer. The emergence of the heat sources is a
result of exothermic reaction of carbon dioxide sorption. This
approach eliminates the necessity of chemical analysis of samples
and can significantly reduce the time and material expenses during
chemisorbents testing. Error of determining the volume fraction of adsorbed carbon
dioxide by the developed method does not exceed 12%. Taking into
account the efficiency of the method, we consider that it is a good
alternative to traditional methods of chemical analysis under the
assessment of the protection sorbents quality.
Abstract: Effective internal control system in the bursary unit of
tertiary educational institutions is geared toward achieving quality
teaching, learning and research environment and as well assist the
management of the institutions, particularly when decisions are to be
made. While internal control system exists in all institutions, the
outlined objectives above are far from being achieved. The paper
therefore assesses the effectiveness of internal control system in
tertiary educational institutions in Nasarawa State, Nigeria with
specific focus on the Nasarawa State Polytechnic, Lafia. The study is
survey, hence a simple closed ended questionnaire was developed
and administered to a sample of twenty seven (27) member staff from
the Bursary and the Internal audit unit of the Nasarawa State
Polytechnic, Lafia so as to obtain data for analysis purposes and to
test the study hypothesis. Responses from the questionnaire were
analysed using a simple percentage and chi square. Findings shows
that the right people are not assigned to the right job in the
department, budget, and management accounting were never used in
the institution’s operations and checking of subordinate by their
superior officers is not regular. This renders the current internal
control structure of the Polytechnic as ineffective and weak. The
paper therefore recommends that: transparency should be seen as
significant, as the institution work toward meeting its objectives, it
therefore means that the right staff be assigned the right job and
regular checking of the subordinates by their superiors be ensued.
Abstract: The aim of sustainable architecture is to design
buildings with the least adverse effects on the environment and
provide better conditions for people. What building forms make the
best use of land? This question was addressed in the late 1960s at the
center of Land Use and Built Form Studies in Cambridge. This led to
a number of influential papers which had a great influence on the
practice of urban design. This paper concentrates on the results of
sustainability caused by climatic conditions in Iranian traditional
architecture in hot-arid regions. As people spent a significant amount
of their time in houses, it was very important to have such houses to
fulfill their needs physically and spiritually as well as satisfying their
cultural and religious aspects of their lifestyles. In a vast country such
as Iran with different climatic zones, traditional builders have
presented series of logical solutions for human comfort. These
solutions have been able to response to the environmental problems
for a long period of time. As a result, by considering the experience
in traditional architecture of hot–arid climate in Iran, it is possible to
attain sustainable architecture.
Abstract: This paper focuses on the questions raised through the
work of Unit 5: ‘In/Out Crisis, emergent and adaptive’; an
architectural research-based studio at [ARC] University of Nicosia. Students were asked to delve into state of Art Technologies in
order to propose sustainable Emergent and Adaptive Architectures
and Urbanities, the resulting unprecedented spatial conditions and
atmospheres of the emergent new ways of living are deemed to be the
ultimate aim of the investigation. Students explored a variety of sites
and crisis conditions seen through their primary ingredient identified
as soil, water and air and their paired combination. Within this
methodology, crisis is seen as a mechanism for allowing an
emergence of new and fascinating ultimate sustainable future cultures
and cities by taking advantage of the primary materiality of the sites.