Abstract: Buildings are one of the valuable assets to provide
people with shelters for work, leisure and rest. After years of
attacks by weather, buildings will deteriorate which need proper
maintenance in order to fulfill the requirements and satisfaction of
the users. Poorly managed buildings not just give a negative image
to the city itself, but also pose potential risk hazards to the health
and safety of the general public. As a result, the management of
maintenance projects has played an important role in cities like
Hong Kong where the problem of urban decay has drawn much
attention. However, most research has focused on managing new
construction, and little research effort has been put on maintenance
projects. Given the short duration and more diversified nature of
work, repair and maintenance works are found to be more difficult
to monitor and regulate when compared with new works. Project
participants may face with problems in running maintenance
projects which should be investigated so that proper strategies can
be established. This paper aims to provide a thorough analysis on
the problems of running maintenance projects. A review of
literature on the characteristics of building maintenance projects
was firstly conducted, which forms a solid basis for the empirical
study. Results on the problems and difficulties of running
maintenance projects from the viewpoints of industry practitioners
will also be delivered with a view to formulating effective
strategies for managing maintenance projects successfully.
Abstract: In the study the influence of the physical-chemical properties of a liquid, the width of a channel gap and the superficial liquid and gas velocities on the patterns formed during two phase flows in vertical, narrow mini-channels was investigated. The research was performed in the channels of rectangular cross-section and of dimensions: 15 x 0.65 mm and 7.5 x 0.73 mm. The experimental data were compared with the published criteria of the transitions between the patterns of two-phase flows.
Abstract: Transportation is one of the most fundamental
challenges of urban development in contemporary world. On the
other hand, sustainable urban development has received tremendous
public attention in the last few years. This trend in addition to other
factors such as energy cost, environmental concerns, traffic
congestion and the feeling of lack of belonging have contributed to
the development of pedestrian areas. The purpose of this paper is to
study the role of walkable streets in sustainable development of
cities. Accordingly, a documentary research through valid sources
has been utilized to substantiate this study. The findings demonstrate
that walking can lead to sustainable urban development from
physical, social, environmental, cultural, economic and political
aspects. Also, pedestrian areas –which are the main context of
walking- act as focal points of development in cities and have a great
effect on modifying and stimulating of their adjacent urban spaces.
Abstract: Fossil fuels are the major source to meet the world
energy requirements but its rapidly diminishing rate and adverse
effects on our ecological system are of major concern. Renewable
energy utilization is the need of time to meet the future challenges.
Ocean energy is the one of these promising energy resources. Threefourths
of the earth-s surface is covered by the oceans. This enormous
energy resource is contained in the oceans- waters, the air above the
oceans, and the land beneath them. The renewable energy source of
ocean mainly is contained in waves, ocean current and offshore solar
energy. Very fewer efforts have been made to harness this reliable
and predictable resource. Harnessing of ocean energy needs detail
knowledge of underlying mathematical governing equation and their
analysis. With the advent of extra ordinary computational resources
it is now possible to predict the wave climatology in lab simulation.
Several techniques have been developed mostly stem from numerical
analysis of Navier Stokes equations. This paper presents a brief over
view of such mathematical model and tools to understand and
analyze the wave climatology. Models of 1st, 2nd and 3rd generations
have been developed to estimate the wave characteristics to assess the
power potential. A brief overview of available wave energy
technologies is also given. A novel concept of on-shore wave energy
extraction method is also presented at the end. The concept is based
upon total energy conservation, where energy of wave is transferred
to the flexible converter to increase its kinetic energy. Squeezing
action by the external pressure on the converter body results in
increase velocities at discharge section. High velocity head then can
be used for energy storage or for direct utility of power generation.
This converter utilizes the both potential and kinetic energy of the
waves and designed for on-shore or near-shore application. Increased
wave height at the shore due to shoaling effects increases the
potential energy of the waves which is converted to renewable
energy. This approach will result in economic wave energy
converter due to near shore installation and more dense waves due to
shoaling. Method will be more efficient because of tapping both
potential and kinetic energy of the waves.
Abstract: In this study, we discussed the effects on the thermal
comfort of super high-rise residences that how effected by the high
thermal capacity structural components. We considered different
building orientations, structures, and insulation methods. We used the
dynamic simulation software THERB (simulation of the thermal
environment of residential buildings). It can estimate the temperature,
humidity, sensible temperature, and heating/cooling load for multiple
buildings. In the past studies, we examined the impact of
air-conditioning loads (hereinafter referred to as AC loads) on the
interior structural parts and the AC-usage patterns of super-high-rise
residences.
Super-high-rise residences have more structural components such
as pillars and beams than do ordinary apartment buildings. The
skeleton is generally made of concrete and steel, which have high
thermal-storage capacities. The thermal-storage capacity of
super-high-rise residences is considered to have a larger impact on the
AC load and thermal comfort than that of ordinary residences.
We show that the AC load of super-high-rise units would be
reduced by installing insulation on the surfaces of interior walls that
are not usually insulated in Japan.
Abstract: The paper discuses the effect of initial stresses on the reflection coefficients of plane waves in a dissipative medium. Basic governing equations are formulated in context of Biot's incremental deformation theory. These governing equations are solved analytically to obtain the dimensional phase velocities of plane waves propagating in plane of symmetry. Closed-form expressions for the reflection coefficients of P and SV waves- incident at the free surface of an initially stressed dissipative medium are obtained. Numerical computations, using these expressions, are carried out for a particular model. Computations made with the results predicted in presence and absence of the initial stresses and the results have been shown graphically. The study shows that the presence of compressive initial stresses increases the velocity of longitudinal wave (P-wave) but diminishes that of transverse wave (SV-wave). Also the numerical results presented indicate that initial stresses and dissipation might affect the reflection coefficients significantly.
Abstract: The main objective of this work is to compare the
quality of service of the bus companies operating in the city of Rio
Branco, located in the state of Acre with the quality of service of the
bus companies operating in the city of Campos, situated in the state
of Rio de Janeiro, both cities in Brazil. This comparison, based on the
opinion of the bus users, will determine their degree of satisfaction
with the service available in both cities. The outcome of this
evaluation shows the users unhappy with the quality of the service
provided by the bus companies operating in both cities and the need
to identify alternative solutions that may minimize the consequences
caused by the main problems detected in this work. With these
alternatives available, the bus companies will be able to better
understand the needs of their customers in terms of manpower,
service cost, time schedule, etc.
Abstract: Massive use of places with strong tourist attraction
with the consequent possibility of losing place-identity produces
harmful effects on cities and their users. In order to mitigate this risk,
areas close to such places can be identified so as to widen the
visitor-s range of action and offer alternative activities integrated
with the main site. The cultural places and appropriate activities can
be identified using a method of analysis and design able to trace the
identity of the places, their characteristics and potential, and to
provide a sustainable improvement. The aim of this work is to
propose PlaceMaker as a method of urban analysis and design which
both detects elements that do not feature in traditional mapping and
which constitute the contemporary identity of the places, and
identifies appropriate project interventions. Two final complex maps
– the first of analysis and the second of design – respectively
represent the identity of places and project interventions. In order to
illustrate the method-s potential; the results of the experimentation
carried out in the Trevi-Pantheon route in Rome and the appropriate
interventions to decongest the area are illustrated.
Abstract: There is inadequate information on the practice of
female genital mutilation (FGM) in the UK, and there are often
myths and perceptions within communities that influence the
effectiveness of prevention programmes. This means it is difficult to
address the trends and changes in the practice in the UK.
To this end, FORWARD undertook novel and innovative research
using the Participatory Ethnographic and Evaluative Research
(PEER) method to explore the views of women from Eritrea, Sudan,
Somalia and Ethiopia that live in London and Bristol (two UK cities).
Women-s views, taken from PEER interviews, reflected reasons for
continued practice of FGM: marriageability, the harnessing and
control of female sexuality, and upholding traditions from their
countries of origin. It was also clear that the main supporters of the
practice were believed to be older women within families and
communities.
Women described the impact FGM was having on their lives as
isolating. And although it was clearly considered a private and
personal matter, they developed a real sense of connection with their
peers within the research process.
The women were overwhelmingly positive about combating the
practice, although they believed it would probably take a while
before it ends completely. They also made concrete
recommendations on how to improve support services for women
affected by FGM: Training for professionals (particularly in
healthcare), increased engagement with, and outreach to,
communities, culturally appropriate materials and information made
available and accessible to communities, and more consequent
implementation of legislation.
Finally, the women asked for more empathy and understanding,
particularly from health professionals. Rather than presenting FGM
as a completely alien and inconceivable practice, it may help for
those looking into these women-s lives and working with them to
understand the social and economic context in which the practice
takes place.
Abstract: The main objective of this paper is to provide an efficient tool for delineating brain tumors in three-dimensional magnetic resonance images. To achieve this goal, we use basically a level-sets approach to delineating three-dimensional brain tumors. Then we introduce a compression plan of 3D brain structures based for the meshes simplification, adapted for time to the specific needs of the telemedicine and to the capacities restricted by network communication. We present here the main stages of our system, and preliminary results which are very encouraging for clinical practice.
Abstract: Elementary particles are created in pairs of equal and opposite momentums at a reference frame at the speed of light. The speed of light reference frame is viewed as a point in space as observed by observer at rest. This point in space is the bang location of the big bang theory. The bang in the big bang theory is not more than sustained flow of pairs of positive and negative elementary particles. Electrons and negative charged elementary particles are ejected from this point in space at velocities faster than light, while protons and positively charged particles obtain velocities lower than light. Subsonic masses are found to have real and positive charge, while supersonic masses are found to be negative and imaginary indicating that the two masses are of different entities. The electron-s super-sonic speed, as viewed by rest observer was calculated and found to be less than the speed of light and is little higher than the electron speed in Bohr-s orbit. The newly formed hydrogen gas temperature was found to be in agreement with temperatures found on newly formed stars. Universe expansion was found to be in agreement. Partial mass and charge elementary particles and particles with momentum only were explained in the context of this theoretical approach.
Abstract: Investigating language acquisition is one of the most
challenging problems in the area of studying language. Syllable
learning as a level of language acquisition has a considerable
significance since it plays an important role in language acquisition.
Because of impossibility of studying language acquisition directly
with children, especially in its developmental phases, computer
models will be useful in examining language acquisition. In this
paper a computer model of early language learning for syllable
learning is proposed. It is guided by a conceptual model of syllable
learning which is named Directions Into Velocities of Articulators
model (DIVA). The computer model uses simple associational and
reinforcement learning rules within neural network architecture
which are inspired by neuroscience. Our simulation results verify the
ability of the proposed computer model in producing phonemes
during babbling and early speech. Also, it provides a framework for
examining the neural basis of language learning and communication
disorders.
Abstract: Due to a high unemployment rate among local people
and a high reliance on expatriate workers, the governments in the
Gulf Co-operation Council (GCC) countries have been implementing
programmes of localisation (replacing foreign workers with GCC
nationals). These programmes have been successful in the public
sector but much less so in the private sector. However, there are now
insufficient jobs for locals in the public sector and the onus to provide
employment has fallen on the private sector. This paper is concerned
with a study, which is a work in progress (certain elements are
complete but not the whole study), investigating the effective
implementation of localisation policies in four- and five-star hotels in
the Kingdom of Saudi Arabia (KSA) and the United Arab Emirates
(UAE). The purpose of the paper is to identify the research gap, and
to present the need for the research. Further, it will explain how this
research was conducted.
Studies of localisation in the GCC countries are under-represented
in scholarly literature. Currently, the hotel sectors in KSA and UAE
play an important part in the countries’ economies. However, the
total proportion of Saudis working in the hotel sector in KSA is
slightly under 8%, and in the UAE, the hotel sector remains highly
reliant on expatriates. There is therefore a need for research on
strategies to enhance the implementation of the localisation policies
in general and in the hotel sector in particular.
Further, despite the importance of the hotel sector to their
economies, there remains a dearth of research into the
implementation of localisation policies in this sector. Indeed, as far as
the researchers are aware, there is no study examining localisation in
the hotel sector in KSA, and few in the UAE. This represents a
considerable research gap.
Regarding how the research was carried out, a multiple case study
strategy was used. The four- and five-star hotel sector in KSA is one
of the cases, while the four- and five-star hotel sector in the UAE is
the other case. Four- and five-star hotels in KSA and the UAE were
chosen as these countries have the longest established localisation
policies of all the GCC states and there are more hotels of these
classifications in these countries than in any of the other Gulf
countries. A literature review was carried out to underpin the
research. The empirical data were gathered in three phases. In order
to gain a pre-understanding of the issues pertaining to the research
context, Phase I involved eight unstructured interviews with officials
from the Saudi Commission for Tourism and Antiquities (three
interviewees); the Saudi Human Resources Development Fund (one);
the Abu Dhabi Tourism and Culture Authority (three); and the Abu
Dhabi Development Fund (one).
In Phase II, a questionnaire was administered to 24 managers and
24 employees in four- and five-star hotels in each country to obtain
their beliefs, attitudes, opinions, preferences and practices concerning
localisation.
Unstructured interviews were carried out in Phase III with six
managers in each country in order to allow them to express opinions
that may not have been explored in sufficient depth in the
questionnaire. The interviews in Phases I and III were analysed using
thematic analysis and SPSS will be used to analyse the questionnaire
data.
It is recommended that future research be undertaken on a larger
scale, with a larger sample taken from all over KSA and the UAE
rather than from only four cities (i.e., Riyadh and Jeddah in KSA and
Abu Dhabi and Sharjah in the UAE), as was the case in this research.
Abstract: A simple model for studying convectional lifting
processes in the tropics is described in this paper with some tests of
the model in dry air. The model consists of the density equation, the
wind equation, the vertical velocity equation, and the temperature
equation. The model domain is two-dimensional with length 100 km
and height 17.5 km. Plan for experiments to investigate the effects of
the heating surface, the deep convection approximation and the
treatment of velocities at the boundaries are discussed. Equations for
the simplified treatment of moisture in the atmosphere in future
numerical experiments are also given.
Abstract: The current sheath dynamics in plasma focus facilities
is the most important factors. In this paper the current sheath velocity
at three dimensional with Sahand plasma focus facility is
investigated. For this purpose the discharge is produced in argon gas
with deposited energy lying in the range of 20-37kJ. The current
sheath is monitored using two tridimensional magnetic probes. These
probes installed near the surface of the interior electrode (anode) at
125mm from the anode axis (pinch place). The effect of gas pressure
on the current sheath velocity also is investigated.
Abstract: Land shortage for burials is one of many issues that emerge out of accelerated urban growth in most developing Asian cities, including Kuala Lumpur. Despite actions taken by the federal government and local authorities in addressing this issue, there is no strategic solution being formulated. Apart from making provisions for land to be developed as new cemeteries, the future plan is merely to allocate reserve land to accommodate the increasing demands of burial grounds around the city. This paper examines problems that arise from the traditional practices of Malay funerary as well as an insight to current urban practices in managing Muslim burial spaces around Kuala Lumpur metropolitan region. This paper will also provide some solutions through design approach that can be applied to counter the existing issues.
Abstract: Bubble columns have a variety of applications in
absorption, bio-reactions, catalytic slurry reactions, and coal
liquefaction; because they are simple to operate, provide good heat
and mass transfer, having less operational cost. The use of
Computational Fluid Dynamics (CFD) for bubble column becomes
important, since it can describe the fluid hydrodynamics on both local
and global scale. Euler- Euler two-phase fluid model has been used to
simulate two-phase (air and water) transient up-flow in bubble
column (15cm diameter) using FLUENT6.3. These simulations and
experiments were operated over a range of superficial gas velocities
in the bubbly flow and churn turbulent regime (1 to16 cm/s) at
ambient conditions. Liquid velocity was varied from 0 to 16cm/s. The
turbulence in the liquid phase is described using the standard k-ε
model. The interactions between the two phases are described
through drag coefficient formulations (Schiller Neumann). The
objectives are to validate CFD simulations with experimental data,
and to obtain grid-independent numerical solutions. Quantitatively
good agreements are obtained between experimental data for hold-up
and simulation values. Axial liquid velocity profiles and gas holdup
profiles were also obtained for the simulation.
Abstract: This paper presents a model for an unreliable
production line, which is operated according to demand with constant
work-in-process (CONWIP). A simulation model is developed based
on the discrete model and several case problems are analyzed using
the model. The model is utilized to optimize storage space capacities
at intermediate stages and the number of kanbans at the last stage,
which is used to trigger the production at the first stage. Furthermore,
effects of several line parameters on production rate are analyzed
using design of experiments.
Abstract: For many industrial applications plate heat
exchangers are demonstrating a large superiority over the
other types of heat exchangers. The efficiency of such a
device depends on numerous factors the effect of which needs
to be analysed and accurately evaluated.
In this paper we present a theoretical analysis of a cocurrent
plate heat exchanger and the results of its numerical
simulation.
Knowing the hot and the cold fluid streams inlet temperatures,
the respective heat capacities mCp
and the value of the
overall heat transfer coefficient, a 1-D mathematical model
based on the steady flow energy balance for a differential
length of the device is developed resulting in a set of N first
order differential equations with boundary conditions where N
is the number of channels.For specific heat exchanger
geometry and operational parameters, the problem is
numerically solved using the shooting method.
The simulation allows the prediction of the temperature
map in the heat exchanger and hence, the evaluation of its
performances. A parametric analysis is performed to evaluate
the influence of the R-parameter on the e-NTU values. For
practical purposes effectiveness-NTU graphs are elaborated
for specific heat exchanger geometry and different operating
conditions.
Abstract: This work presents a study on the abrasive water jet
(AWJ) machining. An explicit finite element analysis (FEA) of
single abrasive particle impact on stainless steel 1.4304 (AISI 304) is
conducted. The abrasive water jet machining is modeled by FEA
software ABAQUS/CAE. Shapes of craters in FEM simulation
results were used and compared with the previous experimental and
FEM works by means of crater sphericity. The influence of impact
angle and particle velocity was observed. Adaptive mesh domain is
used to model the impact zone. Results are in good agreement with
those obtained from the experimental and FEM simulation. The
crater-s depth is also obtained for different impact angle and abrasive
particle velocities.