Abstract: The use of sewage sludge and effluents from
wastewater treatment plants for irrigation of agricultural lands is on
the rise particularly in peri-urban areas of developing countries.
The reuse of nutrients and organic matter in treated wastewater
and sewage sludge via land application is a desirable goal. However,
trace or heavy metals present in sludge pose the risk of human or
phytotoxicity from land application. Long-term use of sewage
sludge, heavy metals can accumulate to phytotoxic levels and results
in reduced plants growth and/or enhanced metal concentrations in
plants, which consumed by animals then enter the food chain. In this
research, the amount of heavy metals was measured in plants
irrigated with wastewater and sludge application. For this purpose,
three pilots were made in a Shush treatment plant in south of Tehran.
Three plants species, spinach, lettuce and radish were selected and
planted in the pilots.First pilot was irrigated just with wastewater of
treatment plant and second pilot was irrigated with wastewater and
sludge application .Third pilot was irrigated with simulated heavy
metals solution equal 50 years of irrigation. The results indicate that
the average of amount of heavy metals Pb, Cd in three plant species
in first pilot were lower than permissible limits .In second pilot,
Cadmium accumulations are high in three species plants and more
than the standard limits. Concentration of Cd , Pb have exceed their
permitted limits in plants in third pilot . It was concluded that the use
of wastewater and sludge application in agricultural lands enriched
soils with heavy metals to concentrations that may pose potential
environmental and health risks in the long-term.
Abstract: In this work, we treat the problems related to chemical and petrochemical plants of a certain complex process taking the centrifugal compressor as an example, a system being very complex by its physical structure as well as its behaviour (surge phenomenon). We propose to study the application possibilities of the recent control approaches to the compressor behaviour, and consequently evaluate their contribution in the practical and theoretical fields. Facing the studied industrial process complexity, we choose to make recourse to fuzzy logic for analysis and treatment of its control problem owing to the fact that these techniques constitute the only framework in which the types of imperfect knowledge can jointly be treated (uncertainties, inaccuracies, etc..) offering suitable tools to characterise them. In the particular case of the centrifugal compressor, these imperfections are interpreted by modelling errors, the neglected dynamics, no modelisable dynamics and the parametric variations. The purpose of this paper is to produce a total robust nonlinear controller design method to stabilize the compression process at its optimum steady state by manipulating the gas rate flow. In order to cope with both the parameter uncertainty and the structured non linearity of the plant, the proposed method consists of a linear steady state regulation that ensures robust optimal control and of a nonlinear compensation that achieves the exact input/output linearization.
Abstract: Sowing date and density are two important factors in
produce of coriander. A field experiment was conducted with
treatments: sowing time (5 May, 20 May, 4 June and 19 June 2009)
and plant density (10, 30, 50 and 70 plants m-2). The experimental
plots were laid out in a factorial according to a RCBD with three
replications. Results showed that the effect of sowing dates and
densities were significant on grain yield and yield components, but
interaction effects between sowing time and density were non
significant for all of traits in this trial. At sowing times 5 May, 20
May, 4 June and 19 June, grain yield obtained 736.9, 837.8, 1003.1
and 1299.6 kg ha-1, respectively. At 10, 30, 50 and 70 plants m-2,
grain yield were 794.9, 1031.0, 1092.3 and 959.3 kg ha-1,
respectively. In this experiment, sowing at 19 June and 50 and 30
plants m-2 had the most grain yield.
Abstract: Plant tissue culture is an important in vitro technology applied for agricultural and industrial production. A sterile condition of culture medium is one of the main aspects. The alternative technique for medium sterilization to replace autoclaving was carried out. For sterilization of plant tissue culture medium without autoclaving, ten commercial pure essential oils and 5 disinfectants were tested. Each essential oil or disinfectant was added to a 20-mL Murashige and Skoog (MS) medium before medium was solidified in a 120-mL container, kept for 2 weeks before evaluating sterile conditions. Treated media, supplemented with essential oils or disinfectants, were compared to control medium, autoclaved at 121 degree Celsius for 15 min. Sterile conditions of MS medium were found 100% from betel oil or clove oil (18 mL/20 mL medium), cinnamon oil (36 mL/20 mL medium), lavender oil or holy basil oil (108 mL/20 mL medium), and lemon oil or tea tree oil or turmeric oil (252 mL/20 mL medium), compared to 100% sterile condition from autoclaved medium. For disinfectants, 2% iodine + 2.4% potassium iodide, 2% merbromine solution, 10% povidone-iodine, 6% sodium hypochlorite or 0.1% thimerosal at 36 mL/20 mL medium provided 100% sterile conditions. Furthermore, growth of new shoots from chrysanthemum node explants on treated media (fresh weight, shoot length, root length and number of node) were also reported and discussed in the comparison of those on autoclaved medium.
Abstract: The plant world is the source of many medicines.
Recently, researchers have estimated that there are approximately
400,000 plant species worldwide, of which about a quarter or a third
have been used by societies for medicinal purposes. The human uses
of plants for thousands of years to treat various ailments, in many
developing countries, much of the population trust in traditional
doctors and their collections of medicinal plants to treat them.
Essential oils have many therapeutic properties. In herbal medicine,
they are used for their antiseptic properties against infectious
diseases of fungal origin, against dermatophytes, those of bacterial
origin. The aim of our study is to determine the antimicrobial effect
of essential oils of the plant Trigonella focnum greacum on some
pathogenic bacteria, it is a medicinal plant used in traditional
therapy. The test adopted is based on the diffusion method on solid
medium (Antibiogram), this method determines the sensitivity or
resistance of a microorganism vis-à-vis the extract studied. Our study
reveals that the essential oil of the plant Trigonella focnum greacum
has a different effect on the resistance of germs. For staphiloccocus
Pseudomonnas aeroginosa and Krebsilla, are moderately sensitive
strains, also Escherichia coli and Candida albicans represents a high
sensitivity. By against Proteus is a strain that represents a weak
sensitivity.
Abstract: Recent research on seeds of bio-diesel plants like
Jatropha curcas, constituting 40-50% bio-crude oil indicates its
potential as one of the most promising alternatives to conventional
sources of energy. Also, limited studies on utilization of de-oiled cake
have revealed that Jatropha bio-waste has good potential to be used as
organic fertilizers produced via aerobic and anaerobic treatment.
However, their commercial exploitation has not yet been possible. The
present study aims at developing appropriate bio-processes and
formulations utilizing Jatropha seed cake as organic fertilizer, for
improving the growth of Polianthes tuberose L. (Tuberose). Pot
experiments were carried out by growing tuberose plants on soil
treated with composted formulations of Jatropha de-oiled cake, Farm
Yard Manure (FYM) and inorganic fertilizers were also blended in
soil. The treatment was carried out through soil amendment as well as
foliar spray. The growth and morphological parameters were
monitored for entire crop cycle.
The growth Length and number of leaves, spike length, rachis
length, number of bulb per plant and earliness of sprouting of bulb and
yield enhancement were comparable to that achieved under inorganic
fertilizer. Furthermore, performance of inorganic fertilizer also showed
an improvement when blended with composted bio-waste. These
findings would open new avenues for Jatropha based bio-wastes to be
composted and used as organic fertilizers for commercial floriculture.
Abstract: Energy consumption is one of the indices in
determining the levels of development of a nation. Therefore,
availability of energy supply to all sectors of life in any country is
crucial for its development. These exists shortage of all kinds of
energy, particularly electricity which is badly needed for economic
development. Electricity from the sun which is quite abundant in
most of the developing countries is used in rural areas to meet basic
electricity needs of a rural community. Today-s electricity supply in
Myanmar is generated by fuel generators and hydroelectric power
plants. However, far-flung areas which are away from National Grids
cannot enjoy the electricity generated by these sources. Since
Myanmar is a land of plentiful sunshine, especially in central and
southern regions of the country, the first form of energy- solar energy
could hopefully become the final solution to its energy supply
problem. The direct conversion of solar energy into electricity using
photovoltaic system has been receiving intensive installation not only
in developed countries but also in developing countries. It is mainly
intended to present solar energy potential and application in
Myanmar. It is also wanted to get the benefits of using solar energy
for people in remote areas which are not yet connected to the national
grids because of the high price of fossil fuel.
Abstract: Principally, plants grown in soilless culture may be
attacked by the same pests and diseases as cultivated traditionally in
soil. The most destructive phytopathogens are fungi, such as
Phythium, Phytophthora and Fusarium, followed by viruses, bacteria
and nematodes. We investigated effect of carbon nanotube filters on
disease management of soilless culture. Tomato seedlings transplant
in plastic pots filled with a soilless media of vermiculite. The crop
irrigated and fertilized using a hydroponic nutrient solution. We used
carbon nanotube filters for nutrient solution disinfection. Our results
show that carbon nanotube filtration significantly reduces pathogens
on tomato plants. Fungal elimination (Fusarium oxysporum and
Pythium spp.) was usually successful at about 96 to 99.9% all over
the cultural season. It is seem that in tomato soilless culture,
nanofiltration constitutes a reliable method that allows control of the
development of diseases caused by pathogenic fungi
Abstract: Phytases are enzymes used as an important component
in monogastric animals feeds in order to improve phosphorous
availability, since it is not readily assimilated by these animals in the
form of the phytate presented in plants and grains. As these enzymes
are used in industrial activities, they must retain its catalytic activities
during a certain storage period. This study presents information about
the stability of 4 different phytases, produced by four macromycetes
fungi through solid-state fermentation (SSF). There is a lack of data
in literature concerning phytase from macromycetes shelf-life in
storage conditions at room, cooling and freezing temperatures. The 4
phytases from macromycetes still had enzymatic activities around
100 days of storage at room temperature. At cooling temperature in
146 days of studies, the phytase from G. stipitatum was the most
stable with 44% of the initial activity, in U.gds (units per gram of
dried fermented substrate). The freezing temperature was the best
condition storage for phytases from G. stipitatum and T. versicolor.
Each condition provided a study for each mushroom phytase,
totalizing 12 studies. The phytases showed to be stable for a long
period without the addition of additives.
Abstract: Coal fly ash (CFA) generated by coal-based thermal
power plants is mainly composed of some oxides having high
crystallinity, like quartz and mullite. In this study, the effect of CFA
crystallinity toward lead adsorption capacity was investigated. To get
solid with various crystallinity, the solution of sodium hydroxide
(NaOH) of 1-7 M was used to treat CFA at various temperature and
reflux time. Furthermore, to evaluate the effect of NaOH-treated CFA
with respect to adsorption capacity, the treated CFA were examine as
adsorbent for removing lead in the solution. The result shows that
using NaOH to treat CFA causes crystallinity of quartz and mullite
decrease. At higher NaOH concentration (>3M), in addition the
damage of quartz and mullite crystallinity is followed by crystal
formation called hydroxysodalite. The lower crystalllinity, the higher
adsorption capacity.
Abstract: Our results showed that for the growth of qualitative
seedling and vegetative raw material of ðó. marschallianus Willd. and
T. serphyllum L. it is more profitable to use the in vitro and
hydroponics combined method. In in vitro culture it is possible to do
micro-propagation whole year with 98-99% rhizogenesis. 30000
micro-plants were obtained from one explant during 9 months.
Hydroponic conditions provide the necessary microclimate for
microplants where the survival rate without acclimatization was
93.3%. The essential oil content in hydroponic dry herb of both
species in vegetative and blossom phase was 1.3% whereas in wild
plants it was 1.2%, the content of extractive substances and vitamin
C also exceeded wild plants. Our biochemical and radiochemical
investigations indicated that the medicinal raw materials obtained
from hydroponic and wild plants of Thymus species correspond to
the demands of SPh XI, and the content of artificial radionuclides
does not exceed the MACL.
Abstract: Phylogenies ; The evolutionary histories of groups of
species are one of the most widely used tools throughout the life
sciences, as well as objects of research with in systematic,
evolutionary biology. In every phylogenetic analysis reconstruction
produces trees. These trees represent the evolutionary histories of
many groups of organisms, bacteria due to horizontal gene transfer
and plants due to process of hybridization. The process of gene
transfer in bacteria and hybridization in plants lead to reticulate
networks, therefore, the methods of constructing trees fail in
constructing reticulate networks. In this paper a model has been
employed to reconstruct phylogenetic network in honey bee. This
network represents reticulate evolution in honey bee. The maximum
parsimony approach has been used to obtain this reticulate network.
Abstract: Ozone (O3) is considered as one of the most
phytotoxic pollutants with deleterious effects on living and non living
components of Ecosystems. It reduces growth and yield of many
crops as well as alters the physiology and crop quality. The present
study described series of experiments to investigate the effects of
ambient O3 at different locations with different ambient levels of O3
depending on proximity to pollutant source and ranged between 17
ppb/h in control experiment to 112 ppb/h in industrial area
respectively. The ambient levels in other three locations (King Saud
University botanical garden, King Fahd Rd, and Almanakh Garden)
were 61,61,77 ppb/h respectively. Tow legume crops species (vicia
vaba L ; and Pisum sativum) differ in their phenology and sensitivity
were used. The results showed a significant negative effect to ozone
on morphology, number of injured leaves, growth and productivity
with a difference in the degree of response depending on the plant
type. Visia Faba showed sensitivity to ozone to number and leaf area
and the degree of injury leaves 3, pisum sativum show higher
sensitivity for the gas for degree of injury 1,The relative growth rate
and seed weight, it turns out there is no significant difference
between the two plants in plant height and number of seeds.
Abstract: To achieve the desired specifications of gain and
phase margins for plants with time-delay that stabilized with FO-PID
controller a lead compensator is designed. At first the range of
controlled system stability based on stability boundary criteria is
determined. Using stability boundary locus method in frequency
domain the fractional order controller parameters are tuned and then
with drawing bode diagram in frequency domain accessing to desired
gain and phase margin are shown. Numerical examples are given to
illustrate the shapes of the stabilizing region and to show the design
procedure.
Abstract: Starting with an analysis of the financial and
operational indicators that can be found in the specialised literature,
this study aims to contribute to improvements in the performance
measurement systems used when the unit of analysis is the
manufacturing plant. For this a search was done in the highest impact
Journals of Production and Operations Management and
Management Accounting , with the aim of determining the financial
and operational indicators used to evaluate performance when
Advanced Production Practices have been implemented, more
specifically when the practices implemented are Total Quality
Management, JIT/Lean Manufacturing and Total Productive
Maintenance. This has enabled us to obtain a classification of the two
types of indicators based on how much each is used. For the financial
indicators we have also prepared a proposal that can be adapted to
manufacturing plants- accounting features. In the near future we will
propose a model that links practices implementation with financial
and operational indicators and these two last with each other. We aim
to will test this model empirically with the data obtained in the High
Performance Manufacturing Project.
Abstract: Biochemical and molecular analysis of some
antioxidant enzyme genes revealed different level of gene expression
on oilseed (Brassica napus). For molecular and biochemical
analysis, leaf tissues were harvested from plants at eight different
developmental stages, from young to senescence. The levels of total
protein and chlorophyll were increased during maturity stages of
plant, while these were decreased during the last stages of plant
growth. Structural analysis (nucleotide and deduced amino acid
sequence, and phylogenic tree) of a complementary DNA revealed a
high level of similarity for a family of Catalase genes. The
expression of the gene encoded by different Catalase isoforms was
assessed during different plant growth phase. No significant
difference between samples was observed, when Catalase activity
was statistically analyzed at different developmental stages. EST
analysis exhibited different transcripts levels for a number of other
relevant antioxidant genes (different isoforms of SOD and
glutathione). The high level of transcription of these genes at
senescence stages was indicated that these genes are senescenceinduced
genes.
Abstract: Energy generated by the force of water in hydropower
can provide a more sustainable, non-polluting alternative to fossil
fuels, along with other renewable sources of energy, such as wind,
solar and tidal power, bio energy and geothermal energy. Small scale
hydroelectricity in Iran is well suited for “off-grid" rural electricity
applications, while other renewable energy sources, such as wind,
solar and biomass, can be beneficially used as fuel for pumping
groundwater for drinking and small scale irrigation in remote rural
areas or small villages. Small Hydro Power plants in Iran have very
low operating and maintenance costs because they consume no fossil
or nuclear fuel and do not involve high temperature processes. The
equipment is relatively simple to operate and maintain. Hydropower
equipment can adjust rapidly to load changes. The extended
equipment life provides significant economic advantages. Some
hydroelectric plants installed 100 years ago still operate reliably. The
Polkolo river is located on Karun basin at southwest of Iran. Situation
and conditions of Polkolo river are evaluated for construction of
small hydropower in this article. The topographical conditions and
the existence of permanent water from springs provide the suitability
to install hydroelectric power plants on the river Polkolo. The
cascade plant consists of 9 power plants connected with each other
and is having the total head as 1100m and discharge about 2.5cubic
meter per second. The annual production of energy is 105.5 million
kwh.
Abstract: The purpose of this article is to study the effects of
plants cover on overland flow and, therefore, its influences on the
amount of eroded and transported soil. In this investigation, all the
experiments were conducted in the LEGHYD laboratory using a
rainfall simulator and a soil tray. The experiments were conducted
using an experimental plot (soil tray) which is 2m long, 0.5 m wide
and 0.15 m deep. The soil used is an agricultural sandy soil (62,08%
coarse sand, 19,14% fine sand, 11,57% silt and 7,21% clay). Plastic
rods (4 mm in diameter) were used to simulate the plants at different
densities: 0 stem/m2 (bared soil), 126 stems/m², 203 stems/m², 461
stems/m² and 2500 stems/m²). The used rainfall intensity is 73mm/h
and the soil tray slope is fixed to 3°. The results have shown that the
overland flow velocities decreased with increasing stems density, and
the density cover has a great effect on sediment concentration.
Darcy–Weisbach and Manning friction coefficients of overland flow
increased when the stems density increased. Froude and Reynolds
numbers decreased with increasing stems density and, consequently,
the flow regime of all treatments was laminar and subcritical. From
these findings, we conclude that increasing the plants cover can
efficiently reduce soil loss and avoid denuding the roots plants.
Abstract: We propose our genuine research of geometric
moments which detects the mineral inadequacy in the frail groundnut
plant. This plant is prone to many deficiencies as a result of the
variance in the soil nutrients. By analyzing the leaves of the plant, we
detect the visual symptoms that are not recognizable to the naked eyes.
We have collected about 160 samples of leaves from the nearby fields.
The images have been taken by keeping every leaf into a black box to
avoid the external interference. For the first time, it has been possible
to provide the farmer with the stages of deficiencies. This paper has
applied the algorithms successfully to many other plants like Lady-s
finger, Green Bean, Lablab Bean, Chilli and Tomato. But we submit
the results of the groundnut predominantly. The accuracy of our
algorithm and method is almost 93%. This will again pioneer a kind of
green revolution in the field of agriculture and will be a boon to that
field.
Abstract: The acid rain causes change in pH level of soil it is
directly influence on root and leaf growth. Yield of the crop was
reduced if acidity of soil is more. Acid rain seeps into the earth and
poisons plants and trees by dissolving toxic substances in the soil,
such as aluminum, which get absorbed by the roots. In present
investigation, effect of acid rain on crop Vigna radiata was studied.
The effect of acid rain on change in soil fertility was detected in
which pH of control sample was 6.5 and pH of 1% H2SO4 and 1%
HNO3 were 3.5. Nitrogen nitrate in soil was high in 1% HNO3 treated
soil & Control sample. Ammonium nitrogen in soil was low in 1%
HNO3 & H2SO4 treated soil. Ammonium nitrogen was medium in
control and other samples. The effect of acid rain on seed
germination on 3rd day of germination control sample growth was
6.1cm with plumule 0.001% HNO3 & 0.001% H2SO4 was 5.5cm
with plumule and 8cm with plumule. On 10th day fungal growth was
observed in 1% and 0.1% H2SO4 concentrations when all plants were
dead. The effect of acid rain on crop productivity was investigated on
3rd day roots were developed in plants. On 12th day Vigna radiata
showed more growth in 0.1% HNO3 and 0.1% H2SO4 treated plants
as compare to control plants. On 20th day development of
discoloration of plant pigments were observed on acid treated plants
leaves. On 34th day Vigna radiata showed flower in 0.1% HNO3,
0.01% HNO3 and 0.01% H2SO4treated plants and no flowers were
observed on control plants. On 42th day 0.1% HNO3, 0.01% HNO
and 0.01% H2SO4 treated Vigna radiata variety and control plants
were showed seeds on plants. In Vigna radiate variety 0.1%, 0.01%
HNO3, 0.01% H2SO4treated plants were dead on 46th day and fungal
growth was observed. The toxicological study was carried out on
Vigna radiata plants exposed to 1% HNO3 cells were damaged more
than 1% H2SO4. Leaf sections exposed to 0.001% HNO3 & H2SO4
showed less damaged of cells and pigmentation observed in entire
slide when compare with control plant.