Abstract: The influences of cell-free solutions (CFSs) of lactic
acid bacteria (LAB) on cadaverine and other biogenic amines
production by Listeria monocytogenes and Staphylococcus aureus
were investigated in lysine decarboxylase broth (LDB) using HPLC.
Cell free solutions were prepared from Lactococcus lactis subsp.
lactis, Leuconostoc mesenteroides subsp. cremoris, Pediococcus
acidilactici and Streptococcus thermophiles. Two different
concentrations that were 50% and 25% CFS and the control without
CFSs were prepared. Significant variations on biogenic amine
production were observed in the presence of L. monocytogenes and S.
aureus (P < 0.05). The function of CFS on biogenic amine production
by foodborne pathogens varied depending on strains and specific
amine. Cadaverine formation by L. monocytogenes and S. aureus in
control were 500.9 and 948.1 mg/L, respectively while the CFSs of
LAB induced 4-fold lower cadaverine production by L.
monocytogenes and 7-fold lower cadaverine production by S. aureus.
The CFSs resulted in strong decreases in cadaverine and putrescine
production by L. monocytogenes and S. aureus, although remarkable
increases were observed for histamine, spermidine, spermine,
serotonin, dopamine, tyramine and agmatine in the presence of LAB
in lysine decarboxylase broth.
Abstract: Livestock is one of the fastest-growing sectors in
agriculture. If carefully managed, have potential opportunities for
economic growth, food sovereignty and food security. In this study
we mainly analyse and compare long-term i.e. for year 2030 climate
variability impact on predicted productivity of meat i.e. beef, mutton
and poultry for the Kingdom of Saudi Arabia w.r.t three factors i.e. i)
climatic-change vulnerability ii) CO2 fertilization and iii) water
scarcity and compare the results with two countries of the region i.e.
Iraq and Yemen. We do the analysis using data from diverse sources,
which was extracted, transformed and integrated before usage. The
collective impact of the three factors had an overall negative effect on
the production of meat for all the three countries, with adverse impact
on Iraq. High similarity was found between CO2 fertilization
(effecting animal fodder) and water scarcity i.e. higher than that
between production of beef and mutton for the three countries
considered. Overall, the three factors do not seem to be favorable for
the three Middle-East countries considered. This points to possibility
of a vegetarian year 2030 based on dependency on indigenous livestock
population.
Abstract: There has been a significant decline in active travel
and a massive increase in the use of car dependent travel in many
countries during the past two decades. Evidential risks for people’s
physical and mental health problems are correlated with this
increased use of motorized travel. These health related problems
range from overweight and obesity to increased air pollution. In
response to these rising concerns health professionals, traffic planers,
local authorities and others have introduced a variety of initiatives to
counterbalance the dominance of cars for daily journeys.
However, the nature of travel behavior change interventions,
which aim to reduce car use, are very complex and challenging
regarding their interactions with human behavior. To change travel
behavior at least two aspects have to be taken into consideration.
First, how to alter attitudes and perceptions toward the sustainable
and healthy modes of travel, in competition with experiences of
private car use. And second, how to make these behavior change
processes irreversible and sustainable. There are no comprehensive
models available to guide policy interventions to increase the level of
success of travel behavior change interventions across both these
dimensions.
A comprehensive theoretical framework is required in the effort to
optimize how to facilitate and guide the processes of data collection
and analysis to achieve the best possible guidelines for policy
makers. Regarding the gaps in the travel behavior change research
literature, this paper attempted to identify and suggest a
multidimensional framework in order to facilitate planning the
implemented travel behavior change interventions. A structured
mixed-method model is suggested to improve the analytic power of
the results according to the complexity of human behavior.
In order to recognize people’s attitudes towards a specific travel
mode, the Theory of Planned Behavior (TPB) was operationalized.
But in order to capture decision making processes the Transtheoretical
model of Behavior Change (TTM) was also used.
Consequently, the combination of these two theories (TTM and TPB)
has resulted in a synthesis with appropriate concepts to identify and
design an implemented travel behavior change interventions.
Abstract: The purpose of this paper is to describe the
perceptions of knowledge and information sharing by the Polish
academic community. An electronic questionnaire was used to gather
opinions of respondents. The presented results are a part of the
findings of empirical studies carried out amongst academics from
various types of universities and academia located throughout
Poland.
Abstract: This study aims to analyze ceramic employees’
occupational health and safety training expectations. To that general
objective, the study tries to examine whether occupational health and
safety training expectations of ceramic employees meaningfully
differentiate depending on demographic features and professional,
social and economic conditions. For this purpose, a questionnaire was
developed by the researcher. The research data were collected
through this questionnaire called “Questionnaire of Occupational
Health and Safety Training Expectation” (QSOHSTE). QSOHSTE
was applied to 125 ceramic employees working in Kütahya, Turkey.
Data obtained from questionnaire were analyzed via SPSS 21.
The findings, obtained from the study, revealed that employees’
agreement level to occupational health and safety training expectation
statements is generally high-level. The findings reveal that employees
expect professional interest such as increased development and
investment, preventive measures for accidents, interventions to
evaluate the working conditions, establishment of safe working
environments and sustainment of adequate equipment for
occupational health and safety training process.
Besides these findings, employees’ agreement level to
occupational health and safety training expectation statements also
varies in terms of educational level, professional seniority, income
level and perception of economic condition.
Abstract: While millings materials from old pavement surface
can be an important component of cost effective maintenance
operation, their use in maintenance projects are not uniform and well
documented. This study documents the different maintenance
practices followed by four transportation districts of New Mexico
Department of Transportation (NMDOT) in an attempt to find
whether millings are being used in maintenance projects by those
districts. Based on existing literature, a questionnaire was developed
related to six common maintenance practices. NMDOT district
personal were interviewed face to face to discuss and get answers to
that questionnaire. It revealed that NMDOT districts mainly use chip
seal and patching. Other maintenance procedures such as sand seal,
scrub seal, slurry seal, and thin overlay have limited use. Two out of
four participating districts do not have any documents on chip
sealing; rather they employ the experiences of the chip seal crew. All
districts use polymer modified high float emulsion (HFE100P) for
chip seal with an application rate ranging from 0.4 to 0.56 gallons per
square yard. Chip application rate varies from 15 to 40 lb/ square
yard. State wide, the thickness of chip seal varies from 3/8'' to 1'' and
life varies from 3 to 10 years. NMDOT districts mainly use three type
of patching: pothole, dig-out and blade patch. Pothole patches are
used for small potholes and during emergency, dig-out patches are
used for all type of potholes sometimes after pothole patching, and
blade patch is used when a significant portion of the pavement is
damaged. Pothole patches last as low as three days whereas, blade
patch lasts as long as 3 years. It was observed that all participating
districts use millings in maintenance projects.
Abstract: Starting from nonlocal continuum mechanics, a
thermodynamically new nonlocal model of Euler-Bernoulli
nanobeams is provided. The nonlocal variational formulation is
consistently provided and the governing differential equation for
transverse displacement is presented. Higher-order boundary
conditions are then consistently derived. An example is contributed in
order to show the effectiveness of the proposed model.
Abstract: The seismic responses of steel buildings with semirigid
post-tensioned connections (PC) are estimated and compared
with those of steel buildings with typical rigid (welded) connections
(RC). The comparison is made in terms of global and local response
parameters. The results indicate that the seismic responses in terms of
interstory shears, roof displacements, axial load and bending
moments are smaller for the buildings with PC connection. The
difference is larger for global than for local parameters, which in turn
varies from one column location to another. The reason for this
improved behavior is that the buildings with PC dissipate more
hysteretic energy than those with RC. In addition, unlike the case of
buildings with WC, for the PC structures the hysteretic energy is
mostly dissipated at the connections, which implies that structural
damage in beams and columns is not significant. According to these
results, steel buildings with PC are a viable option in high seismicity
areas because of their smaller response and self-centering connection
capacity as well as the fact that brittle failure is avoided.
Abstract: The paper presents a practical three-phase PWM
inverter suitable for low voltage, low rating energy efficient systems.
The work in the paper is conducted with the view to establishing the
significance of the loss contribution from the PWM inverter in the
determination of the complete losses of a photovoltaic (PV) arraypowered
induction motor drive water pumping system. Losses
investigated include; conduction and switching loss of the devices
and gate drive losses. It is found that the PWM inverter operates at a
reasonable variable efficiency that does not fall below 92%
depending on the load. The results between the simulated and
experimental results for the system with or without a maximum
power tracker (MPT) compares very well, within an acceptable range
of 2% margin.
Abstract: Polycyclic aromatic hydrocarbons (PAHs) are formed
during the pyrolysis of scrap tyres to produce tyre pyrolytic oil
(TPO). Due to carcinogenic, mutagenic, and toxic properties PAHs
are priority pollutants. Hence it is essential to remove PAHs from
TPO before utilising TPO as a petroleum fuel alternative (to run the
engine). Agricultural wastes have promising future to be utilized as
biosorbent due to their cost effectiveness, abundant availability, high
biosorption capacity and renewability. Various low cost adsorbents
were prepared from natural sources. Uptake of PAHs present in tyre
pyrolytic oil was investigated using various low-cost adsorbents of
natural origin including sawdust (shisham), coconut fiber, neem bark,
chitin, activated charcoal. Adsorption experiments of different PAHs
viz. naphthalene, acenaphthalene, biphenyl and anthracene have been
carried out at ambient temperature (25°C) and at pH 7. It was
observed that for any given PAH, the adsorption capacity increases
with the lignin content. Freundlich constant Kf and 1/n have been
evaluated and it was found that the adsorption isotherms of PAHs
were in agreement with a Freundlich model, while the uptake
capacity of PAHs followed the order: activated charcoal> saw dust
(shisham) > coconut fiber > chitin. The partition coefficients in
acetone-water, and the adsorption constants at equilibrium, could be
linearly correlated with octanol–water partition coefficients. It is
observed that natural adsorbents are good alternative for PAHs
removal. Sawdust of Dalbergia sissoo, a by-product of sawmills was
found to be a promising adsorbent for the removal of PAHs present in
TPO. It is observed that adsorbents studied were comparable to those
of some conventional adsorbents.
Abstract: This paper proposes a rotational invariant texture
feature based on the roughness property of the image for psoriasis
image analysis. In this work, we have applied this feature for image
classification and segmentation. The fuzzy concept is employed to
overcome the imprecision of roughness. Since the psoriasis lesion is
modeled by a rough surface, the feature is extended for calculating
the Psoriasis Area Severity Index value. For classification and
segmentation, the Nearest Neighbor algorithm is applied. We have
obtained promising results for identifying affected lesions by using
the roughness index and severity level estimation.
Abstract: Blueberries are widely valued for their high content in
phenolic compounds with antioxidant activity, and hence beneficial
for the human health. In this way, a study was done to determine the
phenolic composition (total phenols, anthocyanins and tannins) and
antioxidant activity of blueberries from three cultivars (Duke,
Bluecrop, and Ozarkblue) grown in two different Portuguese farms.
Initially two successive extractions were done with methanol
followed by two extractions with aqueous acetone solutions. These
extracts obtained were then used to evaluate the amount of phenolic
compounds and the antioxidant activity. The total phenols were
observed to vary from 4.9 to 8.2 mg GAE/g fresh weight, with
anthocyanin’s contents in the range 1.5-2.8 mg EMv3G/g and tannins
contents in the range 1.5- 3.8 mg/g. The results for antioxidant
activity ranged from 9.3 to 23.2 molTE/g and from 24.7 to 53.4molTE/g, when measured, respectively, by DPPH and ABTS
methods. In conclusion it was observed that, in general, the cultivar
had a visible effect on the phenols present, and furthermore, the
geographical origin showed relevance either in the phenols contents
or the antioxidant activity.
Abstract: Maize constitutes a major agrarian production for use
by the vast population but despite its economic importance; it has not
been produced to meet the economic needs of the country. Achieving
optimum yield in maize can meaningfully be supported by land
suitability analysis in order to guarantee self-sufficiency for future
production optimization. This study examines land suitability for
maize production through the analysis of the physicochemical
variations in soil properties and other land attributes over space using
a Geographic Information System (GIS) framework.
Physicochemical parameters of importance selected include slope,
landuse, physical and chemical properties of the soil, and climatic
variables. Landsat imagery was used to categorize the landuse,
Shuttle Radar Topographic Mapping (SRTM) generated the slope and
soil samples were analyzed for its physical and chemical components.
Suitability was categorized into highly, moderately and marginally
suitable based on Food and Agricultural Organisation (FAO)
classification, using the Analytical Hierarchy Process (AHP)
technique of GIS. This result can be used by small scale farmers for
efficient decision making in the allocation of land for maize
production.
Abstract: Analysis of the properties of coconut (Cocos nucifera)
and its oil was evaluated in this work using standard analytical
techniques. The analyses carried out include proximate composition
of the fruit, extraction of oil from the fruit using different process
parameters and physicochemical analysis of the extracted oil. The
results showed the percentage (%) moisture, crude lipid, crude
protein, ash and carbohydrate content of the coconut as 7.59, 55.15,
5.65, 7.35 and 19.51 respectively. The oil from the coconut fruit was
odourless and yellowish liquid at room temperature (30oC). The
treatment combinations used (leaching time, leaching temperature
and solute: solvent ratio) showed significant differences (P
Abstract: At present, the cascade PID control is widely used to
control the superheating temperature (main steam temperature). As
Main Steam Temperature has the characteristics of large inertia, large
time-delay and time varying, etc., conventional PID control strategy
cannot achieve good control performance. In order to overcome the
bad performance and deficiencies of main steam temperature control
system, Model Free Adaptive Control (MFAC) - P cascade control
system is proposed in this paper. By substituting MFAC in PID of the
main control loop of the main steam temperature control, it can
overcome time delays, non-linearity, disturbance and time variation.
Abstract: Wind energy offers a significant advantage such as no
fuel costs and no emissions from generation. However, wind energy
sources are variable and non-dispatchable. The utility grid is able to
accommodate the variability of wind in smaller proportion along with
the daily load. However, at high penetration levels, the variability can
severely impact the utility reserve requirements and the cost
associated with it. In this paper the impact of wind energy is
evaluated in detail in formulating the total utility cost. The objective
is to minimize the overall cost of generation while ensuring the
proper management of the load. Overall cost includes the curtailment
cost, reserve cost and the reliability cost, as well as any other penalty
imposed by the regulatory authority. Different levels of wind
penetrations are explored and the cost impacts are evaluated. As the
penetration level increases significantly, the reliability becomes a
critical question to be answered. Here we increase the penetration
from the wind yet keep the reliability factor within the acceptable
limit provided by NERC. This paper uses an economic dispatch (ED)
model to incorporate wind generation into the power grid. Power
system costs are analyzed at various wind penetration levels using
Linear Programming. The goal of this study is show how the
increases in wind generation will affect power system economics.
Abstract: Standard processes, similar and limited production
lines, the production of high direct costs will be more accurate than
the use of parts of the traditional cost systems in the literature.
However, direct costs, overhead expenses, in turn, decrease the
burden of increasingly sophisticated production facilities, a situation
that led the researchers to look for the cost of traditional systems of
alternative techniques. Variety cost management approaches for
example Total quality management (TQM), just-in-time (JIT),
benchmarking, kaizen costing, targeting cost, life cycle costs (LLC),
activity-based costing (ABC) value engineering have been
introduced. Management and cost applications have changed over the
past decade and will continue to change. Modern cost systems can
provide relevant and accurate cost information. These methods
provide the decisions about customer, product and process
improvement. The aim of study is to describe and explain the
adoption and application of costing systems in SME. This purpose
reports on a survey conducted during 2014 small and medium sized
enterprises (SME) in Ankara. The survey results were evaluated
using SPSS18 package program.
Abstract: Constructing a portfolio of investments is one of the
most significant financial decisions facing individuals and
institutions. In accordance with the modern portfolio theory
maximization of return at minimal risk should be the investment goal
of any successful investor. In addition, the costs incurred when
setting up a new portfolio or rebalancing an existing portfolio must
be included in any realistic analysis.
In this paper rebalancing an investment portfolio in the presence of
transaction costs on the Croatian capital market is analyzed. The
model applied in the paper is an extension of the standard portfolio
mean-variance optimization model in which transaction costs are
incurred to rebalance an investment portfolio. This model allows
different costs for different securities, and different costs for buying
and selling. In order to find efficient portfolio, using this model, first,
the solution of quadratic programming problem of similar size to the
Markowitz model, and then the solution of a linear programming
problem have to be found. Furthermore, in the paper the impact of
transaction costs on the efficient frontier is investigated. Moreover, it
is shown that global minimum variance portfolio on the efficient
frontier always has the same level of the risk regardless of the amount
of transaction costs. Although efficient frontier position depends of
both transaction costs amount and initial portfolio it can be concluded
that extreme right portfolio on the efficient frontier always contains
only one stock with the highest expected return and the highest risk.
Abstract: Development of a method to estimate gene functions is
an important task in bioinformatics. One of the approaches for the
annotation is the identification of the metabolic pathway that genes are
involved in. Since gene expression data reflect various intracellular
phenomena, those data are considered to be related with genes’
functions. However, it has been difficult to estimate the gene function
with high accuracy. It is considered that the low accuracy of the
estimation is caused by the difficulty of accurately measuring a gene
expression. Even though they are measured under the same condition,
the gene expressions will vary usually. In this study, we proposed a
feature extraction method focusing on the variability of gene
expressions to estimate the genes' metabolic pathway accurately. First,
we estimated the distribution of each gene expression from replicate
data. Next, we calculated the similarity between all gene pairs by KL
divergence, which is a method for calculating the similarity between
distributions. Finally, we utilized the similarity vectors as feature
vectors and trained the multiclass SVM for identifying the genes'
metabolic pathway. To evaluate our developed method, we applied the
method to budding yeast and trained the multiclass SVM for
identifying the seven metabolic pathways. As a result, the accuracy
that calculated by our developed method was higher than the one that
calculated from the raw gene expression data. Thus, our developed
method combined with KL divergence is useful for identifying the
genes' metabolic pathway.
Abstract: The aim of this study was to build ‘Ubi-Net’, a
decision-making support system for systematic establishment in
U-City planning. We have experienced various urban problems caused
by high-density development and population concentrations in
established urban areas. To address these problems, a U-Service
contributes to the alleviation of urban problems by providing real-time
information to citizens through network connections and related
information. However, technology, devices, and information for
consumers are required for systematic U-Service planning in towns
and cities where there are many difficulties in this regard, and a lack of
reference systems.
Thus, this study suggests methods to support the establishment of
sustainable planning by providing comprehensive information
including IT technology, devices, news, and social networking
services (SNS) to U-City planners through intelligent searches. In this
study, we targeted Smart U-Parking Planning to solve parking
problems in an ‘old’ city. Through this study, we sought to contribute
to supporting advances in U-Space and the alleviation of urban
problems.