Abstract: In this study, a 3D combustion chamber was simulated
using FLUENT 6.32. Aims to obtain accurate information about the
profile of the combustion in the furnace and also check the effect of
oxygen enrichment on the combustion process. Oxygen enrichment is
an effective way to reduce combustion pollutant. The flow rate of air
to fuel ratio is varied as 1.3, 3.2 and 5.1 and the oxygen enriched
flow rates are 28, 54 and 68 lit/min. Combustion simulations
typically involve the solution of the turbulent flows with heat
transfer, species transport and chemical reactions. It is common to
use the Reynolds-averaged form of the governing equation in
conjunction with a suitable turbulence model. The 3D Reynolds
Averaged Navier Stokes (RANS) equations with standard k-ε
turbulence model are solved together by Fluent 6.3 software. First
order upwind scheme is used to model governing equations and the
SIMPLE algorithm is used as pressure velocity coupling. Species
mass fractions at the wall are assumed to have zero normal
gradients.Results show that minimum mole fraction of CO2 happens
when the flow rate ratio of air to fuel is 5.1. Additionally, in a fixed
oxygen enrichment condition, increasing the air to fuel ratio will
increase the temperature peak. As a result, oxygen-enrichment can
reduce the CO2 emission at this kind of furnace in high air to fuel
rates.
Abstract: This study was carried out to determine the feedback from the primary school headmasters on in-service training activities. 384 primary school headmasters were asked to give feedback on the in-service training facilities organized by the Ministry of Education through an open –ended question. The study group was formed by 359 primary school headmasters who attended “Management Skills" seminars which were organized in March, April and May in the extent of 2006 In-service Training Facilities Plan by the Ministry of Education and were also volunteers to give feedback on the inservice training activities. The qualitative research method was used in the analysis of the data since the primary school headmasters gave written feedback on the in-service training activities. Having analyzed the feedback, certain categories were formed by coding it. Certain frequencies and percentages were determined according to the codes. It was made obvious that the primary school headmasters benefitted from those facilities by sharing their experiences, problems and their possible solutions mutually
Abstract: In this paper we introduce an efficient solution
method for the Eigen-decomposition of bisymmetric and per
symmetric matrices of symmetric structures. Here we decompose
adjacency and Laplacian matrices of symmetric structures to submatrices
with low dimension for fast and easy calculation of
eigenvalues and eigenvectors. Examples are included to show the
efficiency of the method.
Abstract: As privacy becomes a major concern for consumers
and enterprises, many research have been focused on the privacy
protecting technology in recent years. In this paper, we present a
comprehensive approach for usage access control based on the notion
purpose. In our model, purpose information associated with a given
data element specifies the intended use of the subjects and objects in
the usage access control model. A key feature of our model is that it
allows when an access is required, the access purpose is checked
against the intended purposes for the data item. We propose an
approach to represent purpose information to support access control
based on purpose information. Our proposed solution relies on usage
access control (UAC) models as well as the components which based
on the notions of the purpose information used in subjects and
objects. Finally, comparisons with related works are analyzed.
Abstract: Lake Nasser is one of the largest reservoirs in the
world. Over 120 million metric tons of sediments are deposited in its
dead storage zone every year. The main objective of the present work
was to determine the physical and chemical characteristics of Lake
Nasser sediments. The sample had a relatively low surface area of 2.9
m2/g which increased more than 3-fold upon chemical activation. The
main chemical elements of the raw sediments were C, O and Si with
some traces of Al, Fe and Ca. The organic functional groups for the
tested sample included O-H, C=C, C-H and C-O, with indications of
Si-O and other metal-C and/or metal-O bonds normally associated
with clayey materials. Potentiometric titration of the sample in
different ionic strength backgrounds revealed an alkaline material with
very strong positive surface charge at pH values just a little less than
the pH of zero charge which is ~9. Surface interactions of the
sediments with the background electrolyte were significant. An
advanced surface complexation model was able to capture these
effects, employing a single-site approach to represent protolysis
reactions in aqueous solution, and to determine the significant surface
species in the pH range of environmental interest.
Abstract: The solitary wave solution of the quadratic nonlinear Schrdinger equation is determined by the iterative method called Petviashvili method. This solution is also used for the initial condition for the time evolution to study the stability analysis. The spectral method is applied for the time evolution.
Abstract: Optimization plays an important role in most real
world applications that support decision makers to take the right
decision regarding the strategic directions and operations of the
system they manage. Solutions for traffic management and traffic
congestion problems are considered major problems that most
decision making authorities for cities around the world are looking
for. This review paper gives a full description of the traffic problem
as part of the transportation planning process and present a view as a
framework of urban transportation system analysis where the core of
the system is a transportation network equilibrium model that is
based on optimization techniques and that can also be used for
evaluating an alternative solution or a combination of alternative
solutions for the traffic congestion. Different transportation network
equilibrium models are reviewed from the sequential approach to the
multiclass combining trip generation, trip distribution, modal split,
trip assignment and departure time model. A GIS-Based intelligent
decision support system framework for urban transportation system
analysis is suggested for implementation where the selection of
optimized alternative solutions, single or packages, will be based on
an intelligent agent rather than human being which would lead to
reduction in time, cost and the elimination of the difficulty, by
human being, for finding the best solution to the traffic congestion
problem.
Abstract: Three-dimensional reconstruction of small objects has
been one of the most challenging problems over the last decade.
Computer graphics researchers and photography professionals have
been working on improving 3D reconstruction algorithms to fit the
high demands of various real life applications. Medical sciences,
animation industry, virtual reality, pattern recognition, tourism
industry, and reverse engineering are common fields where 3D
reconstruction of objects plays a vital role. Both lack of accuracy and
high computational cost are the major challenges facing successful
3D reconstruction. Fringe projection has emerged as a promising 3D
reconstruction direction that combines low computational cost to both
high precision and high resolution. It employs digital projection,
structured light systems and phase analysis on fringed pictures.
Research studies have shown that the system has acceptable
performance, and moreover it is insensitive to ambient light.
This paper presents an overview of fringe projection approaches. It
also presents an experimental study and implementation of a simple
fringe projection system. We tested our system using two objects
with different materials and levels of details. Experimental results
have shown that, while our system is simple, it produces acceptable
results.
Abstract: Real-time object tracking is a problem which involves extraction of critical information from complex and uncertain imagedata. In this paper, we present a comprehensive methodology to design an artificial neural network (ANN) for a real-time object tracking application. The object, which is tracked for the purpose of demonstration, is a specific airplane. However, the proposed ANN can be trained to track any other object of interest. The ANN has been simulated and tested on the training and testing datasets, as well as on a real-time streaming video. The tracking error is analyzed with post-regression analysis tool, which finds the correlation among the calculated coordinates and the correct coordinates of the object in the image. The encouraging results from the computer simulation and analysis show that the proposed ANN architecture is a good candidate solution to a real-time object tracking problem.
Abstract: This paper aims at overviewing the topics of a research project (CARDIOSENSOR) on the field of health sciences (biomaterials and biomedical engineering). The project has focused on the development of a nanosensor for the assessment of the risk of cardiovascular diseases by the monitoring of C-reactive protein (CRP), which has been currently considered as the best validated inflammatory biomarker associated to cardiovascular diseases. The project involves tasks such as: 1) the development of sensor devices based on field effect transistors (FET): assembly, optimization and validation; 2) application of sensors to the detection of CRP in standard solutions and comparison with enzyme-linked immunosorbent assay (ELISA); and 3) application of sensors to real samples such as blood and saliva and evaluation of their ability to predict the risk of cardiovascular disease.
Abstract: Linear approximation of point spread function (PSF) is a new method for determining subpixel translations between images. The problem with the actual algorithm is the inability of determining translations larger than 1 pixel. In this paper a multiresolution technique is proposed to deal with the problem. Its performance is evaluated by comparison with two other well known registration method. In the proposed technique the images are downsampled in order to have a wider view. Progressively decreasing the downsampling rate up to the initial resolution and using linear approximation technique at each step, the algorithm is able to determine translations of several pixels in subpixel levels.
Abstract: The scientific community has invested a great deal of effort in the fields of discrete wavelet transform in the last few decades. Discrete wavelet transform (DWT) associated with the vector quantization has been proved to be a very useful tool for the compression of image. However, the DWT is very computationally intensive process requiring innovative and computationally efficient method to obtain the image compression. The concurrent transformation of the image can be an important solution to this problem. This paper proposes a model of concurrent DWT for image compression. Additionally, the formal verification of the model has also been performed. Here the Symbolic Model Verifier (SMV) has been used as the formal verification tool. The system has been modeled in SMV and some properties have been verified formally.
Abstract: In the present paper, we propose numerical methods for solving the Stein equation AXC - X - D = 0 where the matrix A is large and sparse. Such problems appear in discrete-time control problems, filtering and image restoration. We consider the case where the matrix D is of full rank and the case where D is factored as a product of two matrices. The proposed methods are Krylov subspace methods based on the block Arnoldi algorithm. We give theoretical results and we report some numerical experiments.
Abstract: Carbon nanotubes (CNTs) possess unique structural,
mechanical, thermal and electronic properties, and have been
proposed to be used for applications in many fields. However, to
reach the full potential of the CNTs, many problems still need to be
solved, including the development of an easy and effective
purification procedure, since synthesized CNTs contain impurities,
such as amorphous carbon, carbon nanoparticles and metal particles.
Different purification methods yield different CNT characteristics
and may be suitable for the production of different types of CNTs. In
this study, the effect of different purification chemicals on carbon
nanotube quality was investigated. CNTs were firstly synthesized by
chemical vapor deposition (CVD) of acetylene (C2H2) on a
magnesium oxide (MgO) powder impregnated with an iron nitrate
(Fe(NO3)3·9H2O) solution. The synthesis parameters were selected
as: the synthesis temperature of 800°C, the iron content in the
precursor of 5% and the synthesis time of 30 min. The liquid phase
oxidation method was applied for the purification of the synthesized
CNT materials. Three different acid chemicals (HNO3, H2SO4, and
HCl) were used in the removal of the metal catalysts from the
synthesized CNT material to investigate the possible effects of each
acid solution to the purification step. Purification experiments were
carried out at two different temperatures (75 and 120 °C), two
different acid concentrations (3 and 6 M) and for three different time
intervals (6, 8 and 15 h). A 30% H2O2 : 3M HCl (1:1 v%) solution
was also used in the purification step to remove both the metal
catalysts and the amorphous carbon. The purifications using this
solution were performed at the temperature of 75°C for 8 hours.
Purification efficiencies at different conditions were evaluated by
thermogravimetric analysis. Thermal and electrical properties of
CNTs were also determined. It was found that the obtained electrical
conductivity values for the carbon nanotubes were typical for organic
semiconductor materials and thermal stabilities were changed
depending on the purification chemicals.
Abstract: The problem discussed in this paper involves packing fresh fish fileet of the northern Cod into a standard square container. The fish is first cleaned and split and then collected on a belt ready to be stacked in a container. The aim of our work is to pack the fish into the container with constraints on the amount of overlap allowed for the fileets. The current focus is to design a packing cell that can be real-time and of practical use, while finding the optimal solution to the degree of overlap and minimise the unused space of the container.
Abstract: The numerical simulation of the slip effect via
vicoelastic fluid for 4:1 contraction problem is investigated with
regard to kinematic behaviors of streamlines and stress tensor by
models of the Navier-Stokes and Oldroyd-B equations. Twodimensional
spatial reference system of incompressible creeping flow
with and without slip velocity is determined and the finite element
method of a semi-implicit Taylor-Galerkin pressure-correction is
applied to compute the problem of this Cartesian coordinate system
including the schemes of velocity gradient recovery method and the
streamline-Upwind / Petrov-Galerkin procedure. The slip effect at
channel wall is added to calculate after each time step in order to
intend the alteration of flow path. The result of stress values and the
vortices are reduced by the optimum slip coefficient of 0.1 with near
the outcome of analytical solution.
Abstract: This paper deals with the application for contentbased
image retrieval to extract color feature from natural images
stored in the image database by segmenting the image through
clustering. We employ a class of nonparametric techniques in which
the data points are regarded as samples from an unknown probability
density. Explicit computation of the density is avoided by using the
mean shift procedure, a robust clustering technique, which does not
require prior knowledge of the number of clusters, and does not
constrain the shape of the clusters. A non-parametric technique for
the recovery of significant image features is presented and
segmentation module is developed using the mean shift algorithm to
segment each image. In these algorithms, the only user set parameter
is the resolution of the analysis and either gray level or color images
are accepted as inputs. Extensive experimental results illustrate
excellent performance.
Abstract: Acoustic Imaging based sound localization using microphone
array is a challenging task in digital-signal processing.
Discrete Fourier transform (DFT) based near-field acoustical holography
(NAH) is an important acoustical technique for sound source
localization and provide an efficient solution to the ill-posed problem.
However, in practice, due to the usage of small curtailed aperture
and its consequence of significant spectral leakage, the DFT could
not reconstruct the active-region-of-sound (AROS) effectively, especially
near the edges of aperture. In this paper, we emphasize the
fundamental problems of DFT-based NAH, provide a solution to
spectral leakage effect by the extrapolation based on linear predictive
coding and 2D Tukey windowing. This approach has been tested to
localize the single and multi-point sound sources. We observe that
incorporating extrapolation technique increases the spatial resolution,
localization accuracy and reduces spectral leakage when small curtail
aperture with a lower number of sensors accounts.
Abstract: This article proposes a novel Pareto-based multiobjective
meta-heuristic algorithm named non-dominated ranking
genetic algorithm (NRGA) to solve multi-facility location-allocation
problem. In NRGA, a fitness value representing rank is assigned to
each individual of the population. Moreover, two features ranked
based roulette wheel selection including select the fronts and choose
solutions from the fronts, are utilized. The proposed solving
methodology is validated using several examples taken from the
specialized literature. The performance of our approach shows that
NRGA algorithm is able to generate true and well distributed Pareto
optimal solutions.
Abstract: A lot of computer-based methods have been developed
to assess the evacuation capability (EC) of high-rise buildings.
Because softwares are time-consuming and not proper for on scene
applications, we adopted two methods, fuzzy analytic hierarchy
process (FAHP) and technique for order preference by similarity to an
ideal solution (TOPSIS), for EC assessment of a high-rise building in
Jinan. The EC scores obtained with the two methods and the
evacuation time acquired with Pathfinder 2009 for floors 47-60 of the
building were compared with each other. The results show that FAHP
performs better than TOPSIS for EC assessment of high-rise buildings,
especially in the aspect of dealing with the effect of occupant type and
distance to exit on EC, tackling complex problem with multi-level
structure of criteria, and requiring less amount of computation.
However, both FAHP and TOPSIS failed to appropriately handle the
situation where the exit width changes while occupants are few.