Abstract: Experimental study on slicing of sapphire with fixed
abrasive diamond wire saw was conducted in this paper. The process
parameters were optimized through orthogonal experiment of three
factors and four levels. The effects of wire speed, feed speed and
tension pressure on the surface roughness were analyzed. Surface
roughness in cutting direction and feed direction were both detected.
The results show that feed speed plays the most significant role on the
surface roughness of sliced sapphire followed by wire speed and
tension pressure. The optimized process parameters are as follows:
wire speed 1.9 m/s, feed speed 0.187 mm/min and tension pressure
0.18 MPa. In the end, the results were verified by analysis of variance.
Abstract: The aim of the present study was to examine whether
increasing molybdenum (Mo) concentration affects the growth and
Mo concentration of maize (Zea mays L. cv Norma SC) and
sunflower (Helianthus annuus L. cv Arena PR) seedlings within
laboratory conditions.
In this experiment, calcareous chernozem soil was used and Mo
was supplemented into the soil as ammonium molybdate
[(NH4)6Mo7O24.4H2O] in four different concentrations as follow: 0
(control), 30, 90 and 270 mg·kg-1.
In this study, we found that molybdenum in small amount (30
mg·kg-1) affects positively on growth of maize and sunflower
seedlings, however, higher concentration of Mo reduces the dry
weights of shoots and roots. In the case of maize the highest Mo
treatment (270 mg·kg-1) and in sunflower 90 mg·kg-1 treatment
caused significant reduction in plant growth.
In addition, we observed that molybdenum contents in the roots
and shoots were very low in case of control soil but were
significantly elevated with increasing concentration of Mo treatment.
Only in case of sunflower the highest 270 mg·kg-1 Mo treatment
caused decrease in Mo concentration.
Abstract: In this paper, a direct power control (DPC)
strategies have been investigated in order to control a high
power AC/DC converter with time variable load. This converter
is composed of a three level three phase neutral point clamped
(NPC) converter as rectifier and an H-bridge four quadrant
current control converter. In the high power application,
controller not only must adjust the desire outputs but also
decrease the level of distortions which are injected to the network
from the converter. Regarding to this reason and nonlinearity
of the power electronic converter, the conventional controllers
cannot achieve appropriate responses. In this research, the
precise mathematical analysis has been employed to design the
appropriate controller in order to control the time variable
load. A DPC controller has been proposed and simulated using
Matlab/ Simulink. In order to verify the simulation result, a real
time simulator- OPAL-RT- has been employed. In this paper,
the dynamic response and stability of the high power NPC
with variable load has been investigated and compared with
conventional types using a real time simulator. The results proved
that the DPC controller is more stable and has more precise
outputs in comparison with conventional controller.
Abstract: In the past researchers have questioned the
effectiveness of ethics training in higher education. Also, there are
observations that support the view that ethical behaviour (range of
actions)/ethical decision making models used in the past make use of
vignettes to explain ethical behaviour. The understanding remains in
the perspective that these vignettes play a limited role in determining
individual intentions and not actions. Some authors have also agreed
that there are possibilities of differences in one’s intentions and
actions. This paper makes an attempt to fill those gaps by evaluating
real actions rather than intentions. In a way this study suggests the
use of an experiential methodology to explore Berlo’s model of
communication as an action along with orchestration of various
principles. To this endeavor, an attempt was made to use
conversational analysis in the pursuance of evaluating ethical
decision making behaviour among students and middle level
managers. The process was repeated six times with the set of an
average of 15 participants. Similarities have been observed in the
behaviour of students and middle level managers that calls for
understanding that both the groups of individuals have no cognizance
of their actual actions. The deliberations derived out of conversation
were taken a step forward for meta-ethical evaluations to portray a
clear picture of ethical behaviour among participants. This study
provides insights for understanding demonstrated unconscious human
behaviour which may fortuitously be termed both ethical and
unethical.
Abstract: These days customer satisfaction plays vital role in
any business. When customer searches for a product, significantly a
junk of irrelevant information is what is given, leading to customer
dissatisfaction. To provide exactly relevant information on the
searched product, we are proposing a model of KaaS (Knowledge as
a Service), which pre-processes the information using decision
making paradigm using Multi-agents.
Information obtained from various sources is taken to derive
knowledge and they are linked to Cloud to capture new idea. The
main focus of this work is to acquire relevant information
(knowledge) related to product, then convert this knowledge into a
service for customer satisfaction and deploy on cloud.
For achieving these objectives we are have opted to use multi
agents. They are communicating and interacting with each other,
manipulate information, provide knowledge, to take decisions. The
paper discusses about KaaS as an intelligent approach for Knowledge
acquisition.
Abstract: The aim of software maintenance is to maintain
the software system in accordance with advancement in software
and hardware technology. One of the early works on software
maintenance is to extract information at higher level of abstraction. In
this paper, we present the process of how to design an information
extraction tool for software maintenance. The tool can extract the
basic information from old programs such as about variables, based
classes, derived classes, objects of classes, and functions. The tool
have two main parts; the lexical analyzer module that can read the
input file character by character, and the searching module which
users can get the basic information from the existing programs. We
implemented this tool for a patterned sub-C++ language as an input
file.
Abstract: Dengue outbreaks are affected by biological,
ecological, socio-economic and demographic factors that vary over
time and space. These factors have been examined separately and still
require systematic clarification. The present study aimed to investigate
the spatial-temporal clustering relationships between these factors and
dengue outbreaks in the northern region of Sri Lanka. Remote sensing
(RS) data gathered from a plurality of satellites were used to develop
an index comprising rainfall, humidity and temperature data. RS data
gathered by ALOS/AVNIR-2 were used to detect urbanization, and a
digital land cover map was used to extract land cover information.
Other data on relevant factors and dengue outbreaks were collected
through institutions and extant databases. The analyzed RS data and
databases were integrated into geographic information systems,
enabling temporal analysis, spatial statistical analysis and space-time
clustering analysis. Our present results showed that increases in the
number of the combination of ecological factor and socio-economic
and demographic factors with above the average or the presence
contribute to significantly high rates of space-time dengue clusters.
Abstract: This study analyzes the innovative orientation of the
Croatian entrepreneurs. Innovative orientation is represented by the
perceived extent to which an entrepreneur’s product or service or
technology is new, and no other businesses offer the same product.
The sample is extracted from the GEM Croatia Adult Population
Survey dataset for the years 2003-2013. We apply descriptive
statistics, t-test, Chi-square test and logistic regression. Findings
indicate that innovative orientations vary with personal, firm, meso
and macro level variables, and between different stages in
entrepreneurship process. Significant predictors are occupation of the
entrepreneurs, size of the firm and export aspiration for both early
stage and established entrepreneurs. In addition, fear of failure,
expecting to start a new business and seeing an entrepreneurial career
as a desirable choice are predictors of innovative orientation among
early stage entrepreneurs.
Abstract: This paper introduces an original method for
guaranteed estimation of the accuracy for an ensemble of Lipschitz
classifiers. The solution was obtained as a finite closed set of
alternative hypotheses, which contains an object of classification with
probability of not less than the specified value. Thus, the
classification is represented by a set of hypothetical classes. In this
case, the smaller the cardinality of the discrete set of hypothetical
classes is, the higher is the classification accuracy. Experiments have
shown that if cardinality of the classifiers ensemble is increased then
the cardinality of this set of hypothetical classes is reduced. The
problem of the guaranteed estimation of the accuracy for an ensemble
of Lipschitz classifiers is relevant in multichannel classification of
target events in C-OTDR monitoring systems. Results of suggested
approach practical usage to accuracy control in C-OTDR monitoring
systems are present.
Abstract: International and domestic environmental law has
evolved quite rapidly in the last few decades. At the international
level the Stockholm and Rio Declarations paved the way for a broad
based consensus of the international community on environmental
issues and principles. At the Domestic level also many states have
incorporated environmental protection in their constitutions and even
more states are doing the same at least in their domestic legislations.
In this process of evolution environmental law has unleashed a
number of novel principles such as; the participatory principle, the
polluter pays principle, the precautionary principle, the intergenerational
and intra-generational principles, the prevention
principle, the sustainable development principle and so on.
Abstract: Applications of the Hausdorff space and its mappings
into tangent spaces are outlined, including their fractal dimensions
and self-similarities. The paper details this theory set up and further
describes virtualizations and atomization of manufacturing processes.
It demonstrates novel concurrency principles that will guide
manufacturing processes and resources configurations. Moreover,
varying levels of details may be produced by up folding and breaking
down of newly introduced generic models. This choice of layered
generic models for units and systems aspects along specific aspects
allows research work in parallel to other disciplines with the same
focus on all levels of detail. More credit and easier access are granted
to outside disciplines for enriching manufacturing grounds. Specific
mappings and the layers give hints for chances for interdisciplinary
outcomes and may highlight more details for interoperability
standards, as already worked on the international level. The new rules
are described, which require additional properties concerning all
involved entities for defining distributed decision cycles, again on the
base of self-similarity. All properties are further detailed and assigned
to a maturity scale, eventually displaying the smartness maturity of a
total shopfloor or a factory. The paper contributes to the intensive
ongoing discussion in the field of intelligent distributed
manufacturing and promotes solid concepts for implementations of
Cyber Physical Systems and the Internet of Things into
manufacturing industry, like industry 4.0, as discussed in German-speaking
countries.
Abstract: This paper presents system level CMOS solid-state
nanopore techniques enhancement for speedup next generation
molecular recording and high throughput channels. This discussion
also considers optimum number of base-pair (bp) measurements
through channel as an important role to enhance potential read
accuracy. Effective power consumption estimation offered suitable
range of multi-channel configuration. Nanopore bp extraction model
in statistical method could contribute higher read accuracy with
longer read-length (200 < read-length). Nanopore ionic current
switching with Time Multiplexing (TM) based multichannel readout
system contributed hardware savings.
Abstract: An innovative concept called “Flexy-Energy” is developing at 2iE. This concept aims to produce electricity at lower cost by smartly mix different available energy sources in accordance to the load profile of the region. With a higher solar irradiation and due to the fact that Diesel generator are massively used in sub-Saharan rural areas, PV/Diesel hybrid systems could be a good application of this concept and a good solution to electrify this region, provided they are reliable, cost effective and economically attractive to investors. Presentation of the developed approach is the aims of this paper. The PV/Diesel hybrid system designed consists to produce electricity and/or heat from a coupling between Diesel Diesel generators and PV panels without batteries storage, while ensuring the substitution of gasoil by bio-fuels available in the area where the system will be installed. The optimal design of this system is based on his technical performances; the Life Cycle Cost (LCC) and Levelized Cost of Energy are developed and use as economic criteria. The Net Present Value (NPV), the internal rate of return (IRR) and the discounted payback (DPB) are also evaluated according to dual electricity pricing (in sunny and unsunny hours). The PV/Diesel hybrid system obtained is compared to the standalone Diesel Diesel generators. The approach carried out in this paper has been applied to Siby village in Mali (Latitude 12 ° 23'N 8 ° 20'W) with 295 kWh as daily demand.This approach provides optimal physical characteristics (size of the components, number of component) and dynamical characteristics in real time (number of Diesel generator on, their load rate, fuel specific consumptions, and PV penetration rate) of the system. The system obtained is slightly cost effective; but could be improved with optimized tariffing strategies.
Abstract: This paper reports the worldwide status of building
information modeling (BIM) adoption from the perspectives of the
engagement level, the Hype Cycle model, the technology diffusion
model, and BIM services. An online survey was distributed, and 156
experts from six continents responded. Overall, North America was
the most advanced continent, followed by Oceania and Europe.
Countries in Asia perceived their phase mainly as slope of
enlightenment (mature) in the Hype Cycle model. In the technology
diffusion model, the main BIM-users worldwide were “early majority”
(third phase), but those in the Middle East/Africa and South America
were “early adopters” (second phase). In addition, the more advanced
the country, the more number of BIM services employed in general. In
summary, North America, Europe, Oceania, and Asia were advancing
rapidly toward the mature stage of BIM, whereas the Middle
East/Africa and South America were still in the early phase. The
simple indexes used in this study may be used to track the worldwide
status of BIM adoption in long-term surveys.
Abstract: In recent years parasitic antenna play major role in
MIMO systems because of their gain and spectral efficiency. In this
paper, single RF chain MIMO transmitter is designed using
reconfigurable parasitic antenna. The Spatial Modulation (SM) is a
recently proposed scheme in MIMO scenario which activates only
one antenna at a time. The SM entirely avoids ICI and IAS, and only
requires a single RF chain at the transmitter. This would switch ON a
single transmit-antenna for data transmission while all the other
antennas are kept silent. The purpose of the parasitic elements is to
change the radiation pattern of the radio waves which is emitted from
the driven element and directing them in one direction and hence
introduces transmit diversity. Diode is connect between the patch and
ground by changing its state (ON and OFF) the parasitic element act
as reflector and director and also capable of steering azimuth and
elevation angle. This can be achieved by changing the input
impedance of each parasitic element through single RF chain. The
switching of diode would select the single parasitic antenna for
spatial modulation. This antenna is expected to achieve maximum
gain with desired efficiency.
Abstract: Soil quality monitoring is a science-based soil
management tool that assesses soil ecosystem health.
A soil monitoring program in Auckland, New Zealand’s largest
city extends from 1995 to the present. The objective of this study was
to firstly determine changes in soil parameters (basic soil properties
and heavy metals) that were assessed from rural land in 1995-2000
and repeated in 2008-2012. The second objective was to determine
differences in soil parameters across various land uses including
native bush, rural (horticulture, pasture and plantation forestry) and
urban land uses using soil data collected in more recent years (2009-
2013).
Across rural land, mean concentrations of Olsen P had
significantly increased in the second sampling period and was
identified as the indicator of most concern, followed by soil
macroporosity, particularly for horticultural and pastoral land. Mean
concentrations of Cd were also greatest for pastoral and horticultural
land and a positive correlation existed between these two parameters,
which highlights the importance of analysing basic soil parameters in
conjunction with heavy metals. In contrast, mean concentrations of
As, Cr, Pb, Ni and Zn were greatest for urban sites. Native bush sites
had the lowest concentrations of heavy metals and were used to
calculate a ‘pollution index’ (PI). The mean PI was classified as high
(PI > 3) for Cd and Ni and moderate for Pb, Zn, Cr, Cu, As and Hg,
indicating high levels of heavy metal pollution across both rural and
urban soils. From a land use perspective, the mean ‘integrated
pollution index’ was highest for urban sites at 2.9 followed by
pasture, horticulture and plantation forests at 2.7, 2.6 and 0.9,
respectively.
It is recommended that soil sampling continues over time because
a longer spanning record will allow further identification of where
soil problems exist and where resources need to be targeted in the
future. Findings from this study will also inform policy and science
direction in regional councils.
Abstract: This paper is a report on the findings of a study
conducted at the Institute of Public Administration (IPA) in Saudi
Arabia. The paper applied both qualitative and quantitative
approaches to assess the levels of basic computer applications’ skills
among students enrolled in the preparatory programs of the
institution. Qualitative data have been collected from semi-structured
interviews with the instructors who have previously been assigned to
teach Introduction to information technology courses. Quantitative
data were collected by executing a self-report questionnaire and a
written statistical test. Three hundred eighty enrolled students
responded to the questionnaire and one hundred forty two
accomplished the statistical test. The results indicate the lack of
necessary skills to deal with computer applications among most of
the students who are enrolled in the IPA’s preparatory programs.
Abstract: Teaching art by digital means is a big challenge for
the majority of teachers of art and design in primary schools, yet it
allows relationships between art, technology and creativity to be
clearly identified. The aim of this article is to present a modern way
of teaching art, using digital tools in the art classroom to improve
creative ability in pupils aged between nine and eleven years. It also
presents a conceptual model for creativity based on digital art. The
model could be useful for pupils interested in learning to draw by
using an e-drawing package, and for teachers who are interested in
teaching modern digital art in order to improve children’s creativity.
By illustrating the strategy of teaching art through technology, this
model may also help education providers to make suitable choices
about which technological approaches are most effective in
enhancing students’ creative ability, and which digital art tools can
benefit children by developing their technical skills. It is also
expected that use of this model will help to develop skills of social
interaction, which may in turn improve intellectual ability.
Abstract: Within the framework of this research, the regulatory
documents, which are in force in relation to this industry, were
analyzed. The main attention is turned to their modernization and
necessity of their compliance with European standards.
It is a current issue to direct the efforts of state policy on support
of business by implementing infrastructural projects, as well as by
development of human resources, which may be possible by
supporting the relevant higher and vocational studying-educational
programs.
Abstract: Information technology and information systems are
currently at a tipping point. The digital age fundamentally transforms
a large number of industries in the ways they work. Lines between
business and technology blur. Researchers have acknowledged that
this is the time in which the IT/IS organisation needs to re-strategize
itself. In this paper, the author provides a structured review of the IS
and organisation design literature addressing the question of how the
digital age changes the design categories of an IT/IS organisation
design. The findings show that most papers just analyse single
aspects of either IT/IS relevant information or generic organisation
design elements but miss a holistic ‘big-picture’ onto an IT/IS
organisation design. This paper creates a holistic IT/IS organisation
design framework bringing together the IS research strand, the digital
strand and the generic organisation design strand. The research
identified four IT/IS organisation design categories (strategy,
structure, processes and people) and discusses the importance of two
additional categories (sourcing and governance). The authors findings
point to a first anchor point from which further research needs to be
conducted to develop a holistic IT/IS organisation design framework.